about summary refs log tree commit diff
path: root/third_party/git/Documentation/git-rerere.txt
diff options
context:
space:
mode:
Diffstat (limited to 'third_party/git/Documentation/git-rerere.txt')
-rw-r--r--third_party/git/Documentation/git-rerere.txt222
1 files changed, 222 insertions, 0 deletions
diff --git a/third_party/git/Documentation/git-rerere.txt b/third_party/git/Documentation/git-rerere.txt
new file mode 100644
index 000000000000..4cfc88337808
--- /dev/null
+++ b/third_party/git/Documentation/git-rerere.txt
@@ -0,0 +1,222 @@
+git-rerere(1)
+=============
+
+NAME
+----
+git-rerere - Reuse recorded resolution of conflicted merges
+
+SYNOPSIS
+--------
+[verse]
+'git rerere' ['clear'|'forget' <pathspec>|'diff'|'remaining'|'status'|'gc']
+
+DESCRIPTION
+-----------
+
+In a workflow employing relatively long lived topic branches,
+the developer sometimes needs to resolve the same conflicts over
+and over again until the topic branches are done (either merged
+to the "release" branch, or sent out and accepted upstream).
+
+This command assists the developer in this process by recording
+conflicted automerge results and corresponding hand resolve results
+on the initial manual merge, and applying previously recorded
+hand resolutions to their corresponding automerge results.
+
+[NOTE]
+You need to set the configuration variable `rerere.enabled` in order to
+enable this command.
+
+
+COMMANDS
+--------
+
+Normally, 'git rerere' is run without arguments or user-intervention.
+However, it has several commands that allow it to interact with
+its working state.
+
+'clear'::
+
+Reset the metadata used by rerere if a merge resolution is to be
+aborted.  Calling 'git am [--skip|--abort]' or 'git rebase [--skip|--abort]'
+will automatically invoke this command.
+
+'forget' <pathspec>::
+
+Reset the conflict resolutions which rerere has recorded for the current
+conflict in <pathspec>.
+
+'diff'::
+
+Display diffs for the current state of the resolution.  It is
+useful for tracking what has changed while the user is resolving
+conflicts.  Additional arguments are passed directly to the system
+'diff' command installed in PATH.
+
+'status'::
+
+Print paths with conflicts whose merge resolution rerere will record.
+
+'remaining'::
+
+Print paths with conflicts that have not been autoresolved by rerere.
+This includes paths whose resolutions cannot be tracked by rerere,
+such as conflicting submodules.
+
+'gc'::
+
+Prune records of conflicted merges that
+occurred a long time ago.  By default, unresolved conflicts older
+than 15 days and resolved conflicts older than 60
+days are pruned.  These defaults are controlled via the
+`gc.rerereUnresolved` and `gc.rerereResolved` configuration
+variables respectively.
+
+
+DISCUSSION
+----------
+
+When your topic branch modifies an overlapping area that your
+master branch (or upstream) touched since your topic branch
+forked from it, you may want to test it with the latest master,
+even before your topic branch is ready to be pushed upstream:
+
+------------
+              o---*---o topic
+             /
+    o---o---o---*---o---o master
+------------
+
+For such a test, you need to merge master and topic somehow.
+One way to do it is to pull master into the topic branch:
+
+------------
+	$ git switch topic
+	$ git merge master
+
+              o---*---o---+ topic
+             /           /
+    o---o---o---*---o---o master
+------------
+
+The commits marked with `*` touch the same area in the same
+file; you need to resolve the conflicts when creating the commit
+marked with `+`.  Then you can test the result to make sure your
+work-in-progress still works with what is in the latest master.
+
+After this test merge, there are two ways to continue your work
+on the topic.  The easiest is to build on top of the test merge
+commit `+`, and when your work in the topic branch is finally
+ready, pull the topic branch into master, and/or ask the
+upstream to pull from you.  By that time, however, the master or
+the upstream might have been advanced since the test merge `+`,
+in which case the final commit graph would look like this:
+
+------------
+	$ git switch topic
+	$ git merge master
+	$ ... work on both topic and master branches
+	$ git switch master
+	$ git merge topic
+
+              o---*---o---+---o---o topic
+             /           /         \
+    o---o---o---*---o---o---o---o---+ master
+------------
+
+When your topic branch is long-lived, however, your topic branch
+would end up having many such "Merge from master" commits on it,
+which would unnecessarily clutter the development history.
+Readers of the Linux kernel mailing list may remember that Linus
+complained about such too frequent test merges when a subsystem
+maintainer asked to pull from a branch full of "useless merges".
+
+As an alternative, to keep the topic branch clean of test
+merges, you could blow away the test merge, and keep building on
+top of the tip before the test merge:
+
+------------
+	$ git switch topic
+	$ git merge master
+	$ git reset --hard HEAD^ ;# rewind the test merge
+	$ ... work on both topic and master branches
+	$ git switch master
+	$ git merge topic
+
+              o---*---o-------o---o topic
+             /                     \
+    o---o---o---*---o---o---o---o---+ master
+------------
+
+This would leave only one merge commit when your topic branch is
+finally ready and merged into the master branch.  This merge
+would require you to resolve the conflict, introduced by the
+commits marked with `*`.  However, this conflict is often the
+same conflict you resolved when you created the test merge you
+blew away.  'git rerere' helps you resolve this final
+conflicted merge using the information from your earlier hand
+resolve.
+
+Running the 'git rerere' command immediately after a conflicted
+automerge records the conflicted working tree files, with the
+usual conflict markers `<<<<<<<`, `=======`, and `>>>>>>>` in
+them.  Later, after you are done resolving the conflicts,
+running 'git rerere' again will record the resolved state of these
+files.  Suppose you did this when you created the test merge of
+master into the topic branch.
+
+Next time, after seeing the same conflicted automerge,
+running 'git rerere' will perform a three-way merge between the
+earlier conflicted automerge, the earlier manual resolution, and
+the current conflicted automerge.
+If this three-way merge resolves cleanly, the result is written
+out to your working tree file, so you do not have to manually
+resolve it.  Note that 'git rerere' leaves the index file alone,
+so you still need to do the final sanity checks with `git diff`
+(or `git diff -c`) and 'git add' when you are satisfied.
+
+As a convenience measure, 'git merge' automatically invokes
+'git rerere' upon exiting with a failed automerge and 'git rerere'
+records the hand resolve when it is a new conflict, or reuses the earlier hand
+resolve when it is not.  'git commit' also invokes 'git rerere'
+when committing a merge result.  What this means is that you do
+not have to do anything special yourself (besides enabling
+the rerere.enabled config variable).
+
+In our example, when you do the test merge, the manual
+resolution is recorded, and it will be reused when you do the
+actual merge later with the updated master and topic branch, as long
+as the recorded resolution is still applicable.
+
+The information 'git rerere' records is also used when running
+'git rebase'.  After blowing away the test merge and continuing
+development on the topic branch:
+
+------------
+              o---*---o-------o---o topic
+             /
+    o---o---o---*---o---o---o---o   master
+
+	$ git rebase master topic
+
+				  o---*---o-------o---o topic
+				 /
+    o---o---o---*---o---o---o---o   master
+------------
+
+you could run `git rebase master topic`, to bring yourself
+up to date before your topic is ready to be sent upstream.
+This would result in falling back to a three-way merge, and it
+would conflict the same way as the test merge you resolved earlier.
+'git rerere' will be run by 'git rebase' to help you resolve this
+conflict.
+
+[NOTE] 'git rerere' relies on the conflict markers in the file to
+detect the conflict.  If the file already contains lines that look the
+same as lines with conflict markers, 'git rerere' may fail to record a
+conflict resolution.  To work around this, the `conflict-marker-size`
+setting in linkgit:gitattributes[5] can be used.
+
+GIT
+---
+Part of the linkgit:git[1] suite