diff options
Diffstat (limited to 'third_party/cpp/googleapis/ci/kokoro')
42 files changed, 0 insertions, 1288 deletions
diff --git a/third_party/cpp/googleapis/ci/kokoro/Dockerfile.centos b/third_party/cpp/googleapis/ci/kokoro/Dockerfile.centos deleted file mode 100644 index 2982dae0e165..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/Dockerfile.centos +++ /dev/null @@ -1,51 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -ARG DISTRO_VERSION=7 -FROM centos:${DISTRO_VERSION} - -# Add /usr/local/lib - -# Search paths tweak for the build -ENV PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/local/lib64/pkgconfig -ENV LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64 -ENV PATH=/usr/local/bin:${PATH} - -# First install the development tools and OpenSSL. The development tools -# distributed with CentOS (notably CMake) are too old to build -# `google-cloud-cpp`. In these instructions, we use `cmake3` obtained from -# [Software Collections](https://www.softwarecollections.org/). - -RUN rpm -Uvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm -RUN yum install -y centos-release-scl -RUN yum-config-manager --enable rhel-server-rhscl-7-rpms -RUN yum makecache && \ - yum install -y automake cmake3 curl-devel gcc gcc-c++ git libtool \ - make openssl-devel pkgconfig tar wget which zlib-devel -RUN ln -sf /usr/bin/cmake3 /usr/bin/cmake && ln -sf /usr/bin/ctest3 /usr/bin/ctest - -# Install c-ares -RUN mkdir -p /var/tmp/Downloads; \ - cd /var/tmp/Downloads; \ - wget -q https://github.com/c-ares/c-ares/archive/cares-1_15_0.tar.gz; \ - tar -xf cares-1_15_0.tar.gz; \ - cd /var/tmp/Downloads/c-ares-cares-1_15_0; \ - ./buildconf && ./configure && make -j $(nproc); \ - make install; \ - ldconfig - -# Install grpc from source -WORKDIR /var/tmp/ci -COPY install-grpc.sh /var/tmp/ci -RUN /var/tmp/ci/install-grpc.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/Dockerfile.fedora b/third_party/cpp/googleapis/ci/kokoro/Dockerfile.fedora deleted file mode 100644 index c56ace3b1aaf..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/Dockerfile.fedora +++ /dev/null @@ -1,38 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -ARG DISTRO_VERSION=30 -FROM fedora:${DISTRO_VERSION} - -# Fedora includes packages for gRPC, libcurl, and OpenSSL that are recent enough -# for `google-cloud-cpp`. Install these packages and additional development -# tools to compile the dependencies: -RUN dnf makecache && \ - dnf install -y clang clang-tools-extra cmake doxygen findutils gcc-c++ git \ - grpc-devel grpc-plugins libcxx-devel libcxxabi-devel libcurl-devel \ - make openssl-devel pkgconfig protobuf-compiler python-pip ShellCheck \ - tar wget zlib-devel - -# Install the the buildifier tool, which does not compile with the default -# golang compiler for Ubuntu 16.04 and Ubuntu 18.04. -RUN wget -q -O /usr/bin/buildifier https://github.com/bazelbuild/buildtools/releases/download/0.17.2/buildifier -RUN chmod 755 /usr/bin/buildifier - -# Install cmake_format to automatically format the CMake list files. -# https://github.com/cheshirekow/cmake_format -# Pin this to an specific version because the formatting changes when the -# "latest" version is updated, and we do not want the builds to break just -# because some third party changed something. -RUN pip install --upgrade pip -RUN pip install numpy cmake_format==0.6.9 diff --git a/third_party/cpp/googleapis/ci/kokoro/Dockerfile.ubuntu-16.04 b/third_party/cpp/googleapis/ci/kokoro/Dockerfile.ubuntu-16.04 deleted file mode 100644 index 8ef65dd9b2e6..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/Dockerfile.ubuntu-16.04 +++ /dev/null @@ -1,53 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM ubuntu:16.04 - -RUN apt update && \ - apt install -y \ - automake \ - build-essential \ - clang \ - cmake \ - curl \ - doxygen \ - gawk \ - git \ - gcc \ - golang \ - g++ \ - libssl-dev \ - libtool \ - make \ - ninja-build \ - pkg-config \ - python-pip \ - shellcheck \ - tar \ - unzip \ - wget \ - zlib1g-dev - -WORKDIR /var/tmp/Downloads -RUN wget -q https://github.com/c-ares/c-ares/archive/cares-1_15_0.tar.gz && \ - tar -xf cares-1_15_0.tar.gz && \ - cd /var/tmp/Downloads/c-ares-cares-1_15_0 && \ - ./buildconf && ./configure && make -j $(nproc) && \ - make install && \ - ldconfig - -# Install grpc from source -WORKDIR /var/tmp/ci -COPY install-grpc.sh /var/tmp/ci -RUN /var/tmp/ci/install-grpc.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/Dockerfile.ubuntu-18.04 b/third_party/cpp/googleapis/ci/kokoro/Dockerfile.ubuntu-18.04 deleted file mode 100644 index d3660dafa25a..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/Dockerfile.ubuntu-18.04 +++ /dev/null @@ -1,45 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM ubuntu:18.04 - -RUN apt update && \ - apt install -y \ - build-essential \ - clang \ - cmake \ - curl \ - doxygen \ - gawk \ - git \ - gcc \ - golang \ - g++ \ - libc-ares-dev \ - libc-ares2 \ - libssl-dev \ - make \ - ninja-build \ - pkg-config \ - python-pip \ - shellcheck \ - tar \ - unzip \ - wget \ - zlib1g-dev - -# Install grpc from source -WORKDIR /var/tmp/ci -COPY install-grpc.sh /var/tmp/ci -RUN /var/tmp/ci/install-grpc.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/build-in-docker-cmake.sh b/third_party/cpp/googleapis/ci/kokoro/docker/build-in-docker-cmake.sh deleted file mode 100755 index 4dd9e7eb3dff..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/build-in-docker-cmake.sh +++ /dev/null @@ -1,112 +0,0 @@ -#!/usr/bin/env bash -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -set -eu - -if [[ $# != 2 ]]; then - echo "Usage: $(basename "$0") <source-directory> <binary-directory>" - exit 1 -fi - -readonly SOURCE_DIR="$1" -readonly BINARY_DIR="$2" - -# This script is supposed to run inside a Docker container, see -# ci/kokoro/cmake/installed-dependencies/build.sh for the expected setup. The -# /v directory is a volume pointing to a (clean-ish) checkout of the project: -if [[ -z "${PROJECT_ROOT+x}" ]]; then - readonly PROJECT_ROOT="/v" -fi -source "${PROJECT_ROOT}/ci/colors.sh" - -echo -echo "${COLOR_YELLOW}Starting docker build $(date) with $(nproc) cores${COLOR_RESET}" -echo - -echo "================================================================" -echo "Verify formatting $(date)" -(cd "${PROJECT_ROOT}" ; ./ci/check-style.sh) -echo "================================================================" - -echo "================================================================" -echo "Compiling on $(date)" -echo "================================================================" -cd "${PROJECT_ROOT}" -cmake_flags=() -if [[ "${CLANG_TIDY:-}" = "yes" ]]; then - cmake_flags+=("-DGOOGLE_CLOUD_CPP_CLANG_TIDY=yes") -fi -if [[ "${GOOGLE_CLOUD_CPP_CXX_STANDARD:-}" != "" ]]; then - cmake_flags+=( - "-DGOOGLE_CLOUD_CPP_CXX_STANDARD=${GOOGLE_CLOUD_CPP_CXX_STANDARD}") -fi - -if [[ "${CODE_COVERAGE:-}" == "yes" ]]; then - cmake_flags+=( - "-DCMAKE_BUILD_TYPE=Coverage") -fi - -if [[ "${USE_NINJA:-}" == "yes" ]]; then - cmake_flags+=( "-GNinja" ) -fi - -# Avoid unbound variable error with older bash -if [[ "${#cmake_flags[@]}" == 0 ]]; then - cmake "-H${SOURCE_DIR}" "-B${BINARY_DIR}" -else - cmake "-H${SOURCE_DIR}" "-B${BINARY_DIR}" "${cmake_flags[@]}" -fi -cmake --build "${BINARY_DIR}" -- -j "$(nproc)" - -# When user a super-build the tests are hidden in a subdirectory. We can tell -# that ${BINARY_DIR} does not have the tests by checking for this file: -if [[ -r "${BINARY_DIR}/CTestTestfile.cmake" ]]; then - echo "================================================================" - # It is Okay to skip the tests in this case because the super build - # automatically runs them. - echo "Running the unit tests $(date)" - env -C "${BINARY_DIR}" ctest \ - -LE integration-tests \ - --output-on-failure -j "$(nproc)" - echo "================================================================" -fi - -if [[ "${GENERATE_DOCS:-}" = "yes" ]]; then - echo "================================================================" - echo "Validate Doxygen documentation $(date)" - cmake --build "${BINARY_DIR}" --target doxygen-docs - echo "================================================================" -fi - -if [[ ${RUN_INTEGRATION_TESTS} == "yes" ]]; then - echo "================================================================" - echo "Running the integration tests $(date)" - echo "================================================================" - # shellcheck disable=SC1091 - source /c/spanner-integration-tests-config.sh - export GOOGLE_APPLICATION_CREDENTIALS=/c/spanner-credentials.json - - # Run the integration tests too. - env -C "${BINARY_DIR}" ctest \ - -L integration-tests \ - --output-on-failure - echo "================================================================" -fi - -echo "================================================================" -echo "Build finished at $(date)" -echo "================================================================" - -exit 0 diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/build.sh b/third_party/cpp/googleapis/ci/kokoro/docker/build.sh deleted file mode 100755 index fbd886f02852..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/build.sh +++ /dev/null @@ -1,272 +0,0 @@ -#!/usr/bin/env bash -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -set -eu - -export CC=gcc -export CXX=g++ -export DISTRO=ubuntu -export DISTRO_VERSION=18.04 -export CMAKE_SOURCE_DIR="." - -in_docker_script="ci/kokoro/docker/build-in-docker-cmake.sh" - -if [[ $# -eq 1 ]]; then - export BUILD_NAME="${1}" -elif [[ -n "${KOKORO_JOB_NAME:-}" ]]; then - # Kokoro injects the KOKORO_JOB_NAME environment variable, the value of this - # variable is cloud-cpp/spanner/<config-file-name-without-cfg> (or more - # generally <path/to/config-file-without-cfg>). By convention we name these - # files `$foo.cfg` for continuous builds and `$foo-presubmit.cfg` for - # presubmit builds. Here we extract the value of "foo" and use it as the build - # name. - BUILD_NAME="$(basename "${KOKORO_JOB_NAME}" "-presubmit")" - export BUILD_NAME -else - echo "Aborting build as the build name is not defined." - echo "If you are invoking this script via the command line use:" - echo " $0 <build-name>" - echo - echo "If this script is invoked by Kokoro, the CI system is expected to set" - echo "the KOKORO_JOB_NAME environment variable." - exit 1 -fi - -if [[ "${BUILD_NAME}" = "clang-tidy" ]]; then - # Compile with clang-tidy(1) turned on. The build treats clang-tidy warnings - # as errors. - export DISTRO=fedora - export DISTRO_VERSION=30 - export CC=clang - export CXX=clang++ - export CHECK_STYLE=yes - export CLANG_TIDY=yes -elif [[ "${BUILD_NAME}" = "ubuntu-18.04" ]]; then - export CC=gcc - export CXX=g++ -elif [[ "${BUILD_NAME}" = "ubuntu-16.04" ]]; then - export DISTRO_VERSION=16.04 - export CC=gcc - export CXX=g++ -elif [[ "${BUILD_NAME}" = "gcc-4.8" ]]; then - # The oldest version of GCC we support is 4.8, this build checks the code - # against that version. The use of CentOS 7 for that build is not a - # coincidence: the reason we support GCC 4.8 is to support this distribution - # (and its commercial cousin: RHEL 7). - export CC=gcc - export CXX=g++ - export DISTRO=centos - export DISTRO_VERSION=7 -elif [[ "${BUILD_NAME}" = "clang-3.8" ]]; then - # The oldest version of Clang we actively test is 3.8. There is nothing - # particularly interesting about that version. It is simply the version - # included with Ubuntu:16.04, and the oldest version tested by - # google-cloud-cpp. - export DISTRO=ubuntu - export DISTRO_VERSION=16.04 - export CC=clang - export CXX=clang++ -elif [[ "${BUILD_NAME}" = "ninja" ]]; then - # Compiling with Ninja can catch bugs that may not be caught using Make. - export USE_NINJA=yes -else - echo "Unknown BUILD_NAME (${BUILD_NAME}). Fix the Kokoro .cfg file." - exit 1 -fi - -if [[ -z "${PROJECT_ROOT+x}" ]]; then - readonly PROJECT_ROOT="$(cd "$(dirname "$0")/../../.."; pwd)" -fi - -if [[ -z "${PROJECT_ID+x}" ]]; then - readonly PROJECT_ID="cloud-devrel-kokoro-resources" -fi - -# Determine the image name. -readonly IMAGE="gcr.io/${PROJECT_ID}/cpp-cmakefiles/${DISTRO}-${DISTRO_VERSION}" -readonly BUILD_OUTPUT="cmake-out/${BUILD_NAME}" -readonly BUILD_HOME="cmake-out/home/${BUILD_NAME}" - -echo "================================================================" -cd "${PROJECT_ROOT}" -echo "Building with $(nproc) cores $(date) on ${PWD}." - -echo "================================================================" -echo "Capture Docker version to troubleshoot $(date)." -docker version -echo "================================================================" - -has_cache="false" - -if [[ -n "${KOKORO_JOB_NAME:-}" ]]; then - # Download the docker image from the previous build on kokoro for speed. - echo "================================================================" - echo "Downloading Docker image $(date)." - gcloud auth configure-docker - if docker pull "${IMAGE}:latest"; then - echo "Existing image successfully downloaded." - has_cache="true" - fi - echo "================================================================" -fi - -docker_build_flags=( - "-t" "${IMAGE}:latest" -) - -if [[ -f "ci/kokoro/Dockerfile.${DISTRO}-${DISTRO_VERSION}" ]]; then - docker_build_flags+=("-f" "ci/kokoro/Dockerfile.${DISTRO}-${DISTRO_VERSION}") -else - docker_build_flags+=( - "-f" "ci/kokoro/Dockerfile.${DISTRO}" - "--build-arg" "DISTRO_VERSION=${DISTRO_VERSION}" - ) -fi - -if "${has_cache}"; then - docker_build_flags+=("--cache-from=${IMAGE}:latest") -fi - -update_cache="false" -echo "================================================================" -echo "Creating Docker image with all the development tools $(date)." -if ci/retry-command.sh docker build "${docker_build_flags[@]}" ci; then - update_cache="true" - echo "Docker image created $(date)." - docker image ls | grep "${IMAGE}" -else - echo "Failed creating Docker image $(date)." - if "${has_cache}"; then - echo "Continue the build with the cache." - else - exit 1 - fi -fi -echo "================================================================" - -if [[ -n "${KOKORO_JOB_NAME:-}" ]]; then - # Upload the docker image for speeding up the future builds. - echo "================================================================" - echo "Uploading Docker image $(date)." - docker push "${IMAGE}:latest" || true - echo "================================================================" -fi - - -echo "================================================================" -echo "Running the full build $(date)." -# The default user for a Docker container has uid 0 (root). To avoid creating -# root-owned files in the build directory we tell docker to use the current -# user ID, if known. -docker_uid="${UID:-0}" -docker_user="${USER:-root}" -docker_home_prefix="${PWD}/cmake-out/home" -if [[ "${docker_uid}" == "0" ]]; then - docker_home_prefix="${PWD}/cmake-out/root" -fi - -# Make sure the user has a $HOME directory inside the Docker container. -mkdir -p "${BUILD_HOME}" -mkdir -p "${BUILD_OUTPUT}" - -# We use an array for the flags so they are easier to document. -docker_flags=( - # Grant the PTRACE capability to the Docker container running the build, - # this is needed by tools like AddressSanitizer. - "--cap-add" "SYS_PTRACE" - - # The name and version of the distribution, this is used to call - # define-docker-variables.sh and determine the Docker image built, and the - # output directory for any artifacts. - "--env" "DISTRO=${DISTRO}" - "--env" "DISTRO_VERSION=${DISTRO_VERSION}" - - # The C++ and C compiler, both Bazel and CMake use this environment variable - # to select the compiler binary. - "--env" "CXX=${CXX}" - "--env" "CC=${CC}" - - # If set to 'yes', the build script will run the style checks, including - # clang-format, cmake-format, and buildifier. - "--env" "CHECK_STYLE=${CHECK_STYLE:-}" - - # If set to 'yes', the build script will configure clang-tidy. Currently - # only the CMake builds use this flag. - "--env" "CLANG_TIDY=${CLANG_TIDY:-}" - - # If set to 'yes', run the integration tests. Currently only the Bazel - # builds use this flag. - "--env" "RUN_INTEGRATION_TESTS=${RUN_INTEGRATION_TESTS:-}" - - # If set to 'yes', run compile with code coverage flags. Currently only the - # CMake builds use this flag. - "--env" "CODE_COVERAGE=${CODE_COVERAGE:-}" - - # If set to 'yes', use Ninja as the CMake generator. Ninja is more strict - # that Make and can detect errors in your CMake files, it is also faster. - "--env" "USE_NINJA=${USE_NINJA:-}" - - # If set, pass -DGOOGLE_CLOUD_CPP_CXX_STANDARD=<value> to CMake. - "--env" "GOOGLE_CLOUD_CPP_CXX_STANDARD=${GOOGLE_CLOUD_CPP_CXX_STANDARD:-}" - - # When running the integration tests this directory contains the - # configuration files needed to run said tests. Make it available inside - # the Docker container. - "--volume" "${KOKORO_GFILE_DIR:-/dev/shm}:/c" - - # Let the Docker image script know what kind of terminal we are using, that - # produces properly colorized error messages. - "--env" "TERM=${TERM:-dumb}" - - # Run the docker script and this user id. Because the docker image gets to - # write in ${PWD} you typically want this to be your user id. - "--user" "${docker_uid}" - - # Bazel needs this environment variable to work correctly. - "--env" "USER=${docker_user}" - - # We give Bazel and CMake a fake $HOME inside the docker image. Bazel caches - # build byproducts in this directory. CMake (when ccache is enabled) uses - # it to store $HOME/.ccache - "--env" "HOME=/h" - "--volume" "${PWD}/${BUILD_HOME}:/h" - - # Mount the current directory (which is the top-level directory for the - # project) as `/v` inside the docker image, and move to that directory. - "--volume" "${PWD}:/v" - "--workdir" "/v" - - # Mask any other builds that may exist at the same time. That is, these - # directories appear as empty inside the Docker container, this prevents the - # container from writing into other builds, or to get confused by the output - # of other builds. In the CI system this does not matter, as each build runs - # on a completely separate VM. This is useful when running multiple builds - # in your workstation. - "--volume" "/v/cmake-out/home" - "--volume" "/v/cmake-out" - "--volume" "${PWD}/${BUILD_OUTPUT}:/v/${BUILD_OUTPUT}" -) - -# When running the builds from the command-line they get a tty, and the scripts -# running inside the Docker container can produce nicer output. On Kokoro the -# script does not get a tty, and Docker terminates the program if we pass the -# `-it` flag. -if [[ -t 0 ]]; then - docker_flags+=("-it") -fi - -docker run "${docker_flags[@]}" "${IMAGE}:latest" \ - "/v/${in_docker_script}" "${CMAKE_SOURCE_DIR}" \ - "${BUILD_OUTPUT}" diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/clang-3.8-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/clang-3.8-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/clang-3.8-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/clang-3.8.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/clang-3.8.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/clang-3.8.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/clang-tidy-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/clang-tidy-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/clang-tidy-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/clang-tidy.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/clang-tidy.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/clang-tidy.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/common.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/common.cfg deleted file mode 100644 index 213d93419a12..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/common.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# Format: //devtools/kokoro/config/proto/build.proto -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -build_file: "cpp-cmakefiles/ci/kokoro/docker/build.sh" -timeout_mins: 120 diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/gcc-4.8-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/gcc-4.8-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/gcc-4.8-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/gcc-4.8.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/gcc-4.8.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/gcc-4.8.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/ninja-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/ninja-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/ninja-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/ninja.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/ninja.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/ninja.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-16.04-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-16.04-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-16.04-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-16.04.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-16.04.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-16.04.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-18.04-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-18.04-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-18.04-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-18.04.cfg b/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-18.04.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/docker/ubuntu-18.04.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.centos-7 b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.centos-7 deleted file mode 100644 index 21b8908134d4..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.centos-7 +++ /dev/null @@ -1,105 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM centos:7 AS devtools - -# Please keep the formatting in these commands, it is optimized to cut & paste -# into the INSTALL.md file. - -## [START INSTALL.md] - -# First install the development tools and OpenSSL. The development tools -# distributed with CentOS (notably CMake) are too old to build -# `cpp-cmakefiles`. In these instructions, we use `cmake3` obtained from -# [Software Collections](https://www.softwarecollections.org/). - -# ```bash -RUN rpm -Uvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm -RUN yum install -y centos-release-scl -RUN yum-config-manager --enable rhel-server-rhscl-7-rpms -RUN yum makecache && \ - yum install -y automake cmake3 curl-devel gcc gcc-c++ git libtool \ - make openssl-devel pkgconfig tar wget which zlib-devel -RUN ln -sf /usr/bin/cmake3 /usr/bin/cmake && ln -sf /usr/bin/ctest3 /usr/bin/ctest -# ``` - -# #### Protobuf - -# Likewise, manually install protobuf: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/google/protobuf/archive/v3.9.0.tar.gz -RUN tar -xf v3.9.0.tar.gz -WORKDIR /var/tmp/build/protobuf-3.9.0/cmake -RUN cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DBUILD_SHARED_LIBS=yes \ - -Dprotobuf_BUILD_TESTS=OFF \ - -H. -Bcmake-out -RUN cmake --build cmake-out --target install -- -j $(nproc) -RUN ldconfig -# ``` - -# #### c-ares - -# Recent versions of gRPC require c-ares >= 1.11, while CentOS-7 -# distributes c-ares-1.10. Manually install a newer version: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/c-ares/c-ares/archive/cares-1_15_0.tar.gz -RUN tar -xf cares-1_15_0.tar.gz -WORKDIR /var/tmp/build/c-ares-cares-1_15_0 -RUN ./buildconf && ./configure && make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -# #### gRPC - -# Can be manually installed using: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/grpc/grpc/archive/v1.22.0.tar.gz -RUN tar -xf v1.22.0.tar.gz -WORKDIR /var/tmp/build/grpc-1.22.0 -ENV PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/local/lib64/pkgconfig -ENV LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64 -ENV PATH=/usr/local/bin:${PATH} -RUN make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -FROM devtools AS install - -# #### googleapis - -# Finally we can install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30 b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30 deleted file mode 100644 index d6e57b91e232..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30 +++ /dev/null @@ -1,58 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM fedora:30 AS devtools - -# Please keep the formatting below, it is used by `extract-install.md` -# to generate the contents of the top-level INSTALL.md. - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN dnf makecache && \ - dnf install -y cmake gcc-c++ git make openssl-devel pkgconfig \ - zlib-devel -# ``` - -# Fedora includes packages for gRPC, libcurl, and OpenSSL that are recent enough -# for `cpp-cmakefiles`. Install these packages and additional development -# tools to compile the dependencies: - -# ```bash -RUN dnf makecache && \ - dnf install -y grpc-devel grpc-plugins \ - libcurl-devel protobuf-compiler tar wget zlib-devel -# ``` - -FROM devtools AS install - -# #### googleapis - -# We can now compile and install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30-shared b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30-shared deleted file mode 100644 index 572018f994dc..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30-shared +++ /dev/null @@ -1,62 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM fedora:30 AS devtools - -# Please keep the formatting below, it is used by `extract-install.md` -# to generate the contents of the top-level INSTALL.md. - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN dnf makecache && \ - dnf install -y cmake gcc-c++ git make openssl-devel pkgconfig \ - zlib-devel -# ``` - -# Fedora includes packages for gRPC, libcurl, and OpenSSL that are recent enough -# for `cpp-cmakefiles`. Install these packages and additional development -# tools to compile the dependencies: - -# ```bash -RUN dnf makecache && \ - dnf install -y grpc-devel grpc-plugins \ - libcurl-devel protobuf-compiler tar wget zlib-devel -# ``` - -FROM devtools AS install - -# #### googleapis - -# We can now compile and install `googleapis` as shared library. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -DBUILD_SHARED_LIBS=yes -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# The share libraries will install in `/usr/local/lib64` we need that directory -# in the ld.so cache: -RUN echo "/usr/local/lib64" | tee /etc/ld.so.conf.d/local.conf -RUN ldconfig -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-leap b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-leap deleted file mode 100644 index ea2dda5ec4e6..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-leap +++ /dev/null @@ -1,114 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM opensuse/leap:latest AS devtools - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN zypper refresh && \ - zypper install --allow-downgrade -y cmake gcc gcc-c++ git gzip \ - libcurl-devel libopenssl-devel make tar wget -# ``` - -# #### Protobuf - -# OpenSUSE Leap includes a package for protobuf-2.6, but this is too old to -# support the Google Cloud Platform proto files, or to support gRPC for that -# matter. Manually install protobuf: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/google/protobuf/archive/v3.9.0.tar.gz -RUN tar -xf v3.9.0.tar.gz -WORKDIR /var/tmp/build/protobuf-3.9.0/cmake -RUN cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DBUILD_SHARED_LIBS=yes \ - -Dprotobuf_BUILD_TESTS=OFF \ - -H. -Bcmake-out -RUN cmake --build cmake-out --target install -- -j $(nproc) -RUN ldconfig -# ``` - -# #### c-ares - -# Recent versions of gRPC require c-ares >= 1.11, while OpenSUSE Leap -# distributes c-ares-1.9. We need some additional development tools to compile -# this library: - -# ```bash -RUN zypper refresh && \ - zypper install -y automake libtool -# ``` - -# Manually install a newer version: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/c-ares/c-ares/archive/cares-1_15_0.tar.gz -RUN tar -xf cares-1_15_0.tar.gz -WORKDIR /var/tmp/build/c-ares-cares-1_15_0 -RUN ./buildconf && ./configure && make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -# #### gRPC - -# The gRPC Makefile uses `which` to determine whether the compiler is available. -# Install this command for the extremely rare case where it may be missing from -# your workstation or build server: - -# ```bash -RUN zypper refresh && \ - zypper install -y which -# ``` - -# Then gRPC can be manually installed using: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/grpc/grpc/archive/v1.22.0.tar.gz -RUN tar -xf v1.22.0.tar.gz -WORKDIR /var/tmp/build/grpc-1.22.0 -ENV PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/local/lib64/pkgconfig -ENV LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64 -ENV PATH=/usr/local/bin:${PATH} -RUN make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -FROM devtools AS install - -# #### googleapis - -# We can now compile and install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-tumbleweed b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-tumbleweed deleted file mode 100644 index 9a87337870e3..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-tumbleweed +++ /dev/null @@ -1,54 +0,0 @@ -# Copyright 2018 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM opensuse/tumbleweed:latest AS devtools - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN zypper refresh && \ - zypper install --allow-downgrade -y cmake gcc gcc-c++ git gzip \ - libcurl-devel libopenssl-devel make tar wget zlib-devel -# ``` - -# OpenSUSE:tumbleweed provides packages for gRPC, libcurl, and protobuf, and the -# versions of these packages are recent enough to support the Google Cloud -# Platform proto files. - -# ```bash -RUN zypper refresh && \ - zypper install -y grpc-devel gzip libcurl-devel tar wget -# ``` - -FROM devtools AS install - -# #### googleapis - -# We can now compile and install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-16.04 b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-16.04 deleted file mode 100644 index 030ed4a2aa85..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-16.04 +++ /dev/null @@ -1,100 +0,0 @@ -# Copyright 2018 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM ubuntu:16.04 AS devtools - -# Please keep the formatting in these commands, it is optimized to cut & paste -# into the README.md file. - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN apt update && \ - apt install -y automake build-essential cmake git gcc g++ cmake \ - libcurl4-openssl-dev libssl-dev libtool make pkg-config tar wget \ - zlib1g-dev -# ``` - -# #### c-ares - -# Recent versions of gRPC require c-ares >= 1.11, while Ubuntu-16.04 -# distributes c-ares-1.10. We can manually install a newer version -# of c-ares: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/c-ares/c-ares/archive/cares-1_15_0.tar.gz -RUN tar -xf cares-1_15_0.tar.gz -WORKDIR /var/tmp/build/c-ares-cares-1_15_0 -RUN ./buildconf && ./configure && make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -# #### Protobuf - -# While protobuf-3.0 is distributed with Ubuntu, the Google Cloud Plaform proto -# files require more recent versions (circa 3.4.x). To manually install a more -# recent version use: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/google/protobuf/archive/v3.9.0.tar.gz -RUN tar -xf v3.9.0.tar.gz -WORKDIR /var/tmp/build/protobuf-3.9.0/cmake -RUN cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DBUILD_SHARED_LIBS=yes \ - -Dprotobuf_BUILD_TESTS=OFF \ - -H. -Bcmake-out -RUN cmake --build cmake-out --target install -- -j $(nproc) -RUN ldconfig -# ``` - -# #### gRPC - -# Likewise, Ubuntu has packages for grpc-1.3.x, but this version is too old for -# the Google Cloud Platform APIs: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/grpc/grpc/archive/v1.22.0.tar.gz -RUN tar -xf v1.22.0.tar.gz -WORKDIR /var/tmp/build/grpc-1.22.0 -RUN make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -FROM devtools AS install - -# #### googleapis - -# Finally we can install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-18.04 b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-18.04 deleted file mode 100644 index 486d24aa47db..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-18.04 +++ /dev/null @@ -1,84 +0,0 @@ -# Copyright 2018 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM ubuntu:18.04 AS devtools - -# Please keep the formatting in these commands, it is optimized to cut & paste -# into the README.md file. - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN apt update && \ - apt install -y build-essential cmake git gcc g++ cmake \ - libc-ares-dev libc-ares2 libcurl4-openssl-dev libssl-dev make \ - pkg-config tar wget zlib1g-dev -# ``` - -# #### Protobuf - -# While protobuf-3.0 is distributed with Ubuntu, the Google Cloud Plaform proto -# files require more recent versions (circa 3.4.x). To manually install a more -# recent version use: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/google/protobuf/archive/v3.9.0.tar.gz -RUN tar -xf v3.9.0.tar.gz -WORKDIR /var/tmp/build/protobuf-3.9.0/cmake -RUN cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DBUILD_SHARED_LIBS=yes \ - -Dprotobuf_BUILD_TESTS=OFF \ - -H. -Bcmake-out -RUN cmake --build cmake-out --target install -- -j $(nproc) -RUN ldconfig -# ``` - -# #### gRPC - -# Likewise, Ubuntu has packages for grpc-1.3.x, but this version is too old for -# the Google Cloud Platform APIs: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/grpc/grpc/archive/v1.22.0.tar.gz -RUN tar -xf v1.22.0.tar.gz -WORKDIR /var/tmp/build/grpc-1.22.0 -RUN make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -FROM devtools AS install - -# #### googleapis - -# Finally we can install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/build.sh b/third_party/cpp/googleapis/ci/kokoro/install/build.sh deleted file mode 100755 index 42e85f39b6fc..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/build.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/usr/bin/env bash -# -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -set -eu - -if [[ $# -eq 1 ]]; then - export TEST_TARGET="${1}" -elif [[ -n "${KOKORO_JOB_NAME:-}" ]]; then - # Kokoro injects the KOKORO_JOB_NAME environment variable, the value of this - # variable is cloud-cpp/spanner/<config-file-name-without-cfg> (or more - # generally <path/to/config-file-without-cfg>). By convention we name these - # files `$foo.cfg` for continuous builds and `$foo-presubmit.cfg` for - # presubmit builds. Here we extract the value of "foo" and use it as the build - # name. - TEST_TARGET="$(basename "${KOKORO_JOB_NAME}" "-presubmit")" - export TEST_TARGET -else - echo "Aborting build as the distribution name is not defined." - echo "If you are invoking this script via the command line use:" - echo " $0 <distro-name>" - echo - echo "If this script is invoked by Kokoro, the CI system is expected to set" - echo "the KOKORO_JOB_NAME environment variable." - exit 1 -fi - -echo "================================================================" -echo "Change working directory to project root $(date)." -cd "$(dirname "$0")/../../.." - -if [[ -z "${PROJECT_ID+x}" ]]; then - readonly PROJECT_ID="cloud-devrel-kokoro-resources" -fi - -readonly DEV_IMAGE="gcr.io/${PROJECT_ID}/cpp-cmakefiles/test-install-dev-${TEST_TARGET}" -readonly IMAGE="gcr.io/${PROJECT_ID}/cpp-cmakefiles/test-install-${TEST_TARGET}" - -has_cache="false" - -# We download the cached dev image for pull requests on kokoro. For continuous -# jobs, we don't download the cached image. This means we build from scratch and -# upload the image for future builds for pull requests. -if [[ -n "${KOKORO_JOB_NAME:-}" ]] \ - && [[ -n "${KOKORO_GITHUB_PULL_REQUEST_NUMBER:-}" ]]; then - echo "================================================================" - echo "Download existing image (if available) for ${TEST_TARGET} $(date)." - if docker pull "${DEV_IMAGE}:latest"; then - echo "Existing image successfully downloaded." - has_cache="true" - fi - echo "================================================================" -fi - -echo "================================================================" -echo "Build base image with minimal development tools for ${TEST_TARGET} $(date)." -update_cache="false" - -devtools_flags=( - # Only build up to the stage that installs the minimal development tools, but - # does not compile any of our code. - "--target" "devtools" - # Create the image with the same tag as the cache we are using, so we can - # upload it. - "-t" "${DEV_IMAGE}:latest" - "-f" "ci/kokoro/install/Dockerfile.${TEST_TARGET}" -) - -if "${has_cache}"; then - devtools_flags+=("--cache-from=${DEV_IMAGE}:latest") -fi - -echo "Running docker build with " "${devtools_flags[@]}" -if docker build "${devtools_flags[@]}" ci; then - update_cache="true" -fi - -# We upload the cached image for continuous builds. -if "${update_cache}" && [[ -z "${KOKORO_GITHUB_PULL_REQUEST_NUMBER:-}" ]] \ - && [[ -n "${KOKORO_JOB_NAME:-}" ]]; then - echo "================================================================" - echo "Uploading updated base image for ${TEST_TARGET} $(date)." - # Do not stop the build on a failure to update the cache. - docker push "${DEV_IMAGE}:latest" || true -fi - -echo "================================================================" -echo "Run validation script for INSTALL instructions on ${TEST_TARGET}." -docker build \ - "--cache-from=${DEV_IMAGE}:latest" \ - "--target=install" \ - -t "${IMAGE}" \ - -f "ci/kokoro/install/Dockerfile.${TEST_TARGET}" . -echo "================================================================" diff --git a/third_party/cpp/googleapis/ci/kokoro/install/centos-7-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/centos-7-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/centos-7-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/centos-7.cfg b/third_party/cpp/googleapis/ci/kokoro/install/centos-7.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/centos-7.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/common.cfg b/third_party/cpp/googleapis/ci/kokoro/install/common.cfg deleted file mode 100644 index 77a3a1f9fefe..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/common.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# Format: //devtools/kokoro/config/proto/build.proto -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -build_file: "cpp-cmakefiles/ci/kokoro/install/build.sh" -timeout_mins: 120 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared.cfg b/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30.cfg b/third_party/cpp/googleapis/ci/kokoro/install/fedora-30.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap.cfg b/third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed.cfg b/third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04.cfg b/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04-presubmit.cfg +++ /dev/null diff --git a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04.cfg b/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04.cfg +++ /dev/null |