diff options
Diffstat (limited to 'third_party/abseil_cpp/absl/base/dynamic_annotations.h')
| -rw-r--r-- | third_party/abseil_cpp/absl/base/dynamic_annotations.h | 386 |
1 files changed, 386 insertions, 0 deletions
diff --git a/third_party/abseil_cpp/absl/base/dynamic_annotations.h b/third_party/abseil_cpp/absl/base/dynamic_annotations.h new file mode 100644 index 000000000000..2d98526075eb --- /dev/null +++ b/third_party/abseil_cpp/absl/base/dynamic_annotations.h @@ -0,0 +1,386 @@ +/* + * Copyright 2017 The Abseil Authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * https://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +/* This file defines dynamic annotations for use with dynamic analysis + tool such as valgrind, PIN, etc. + + Dynamic annotation is a source code annotation that affects + the generated code (that is, the annotation is not a comment). + Each such annotation is attached to a particular + instruction and/or to a particular object (address) in the program. + + The annotations that should be used by users are macros in all upper-case + (e.g., ANNOTATE_THREAD_NAME). + + Actual implementation of these macros may differ depending on the + dynamic analysis tool being used. + + This file supports the following configurations: + - Dynamic Annotations enabled (with static thread-safety warnings disabled). + In this case, macros expand to functions implemented by Thread Sanitizer, + when building with TSan. When not provided an external implementation, + dynamic_annotations.cc provides no-op implementations. + + - Static Clang thread-safety warnings enabled. + When building with a Clang compiler that supports thread-safety warnings, + a subset of annotations can be statically-checked at compile-time. We + expand these macros to static-inline functions that can be analyzed for + thread-safety, but afterwards elided when building the final binary. + + - All annotations are disabled. + If neither Dynamic Annotations nor Clang thread-safety warnings are + enabled, then all annotation-macros expand to empty. */ + +#ifndef ABSL_BASE_DYNAMIC_ANNOTATIONS_H_ +#define ABSL_BASE_DYNAMIC_ANNOTATIONS_H_ + +#ifndef DYNAMIC_ANNOTATIONS_ENABLED +# define DYNAMIC_ANNOTATIONS_ENABLED 0 +#endif + +#if DYNAMIC_ANNOTATIONS_ENABLED != 0 + + /* ------------------------------------------------------------- + Annotations that suppress errors. It is usually better to express the + program's synchronization using the other annotations, but these can + be used when all else fails. */ + + /* Report that we may have a benign race at "pointer", with size + "sizeof(*(pointer))". "pointer" must be a non-void* pointer. Insert at the + point where "pointer" has been allocated, preferably close to the point + where the race happens. See also ANNOTATE_BENIGN_RACE_STATIC. */ + #define ANNOTATE_BENIGN_RACE(pointer, description) \ + AnnotateBenignRaceSized(__FILE__, __LINE__, pointer, \ + sizeof(*(pointer)), description) + + /* Same as ANNOTATE_BENIGN_RACE(address, description), but applies to + the memory range [address, address+size). */ + #define ANNOTATE_BENIGN_RACE_SIZED(address, size, description) \ + AnnotateBenignRaceSized(__FILE__, __LINE__, address, size, description) + + /* Enable (enable!=0) or disable (enable==0) race detection for all threads. + This annotation could be useful if you want to skip expensive race analysis + during some period of program execution, e.g. during initialization. */ + #define ANNOTATE_ENABLE_RACE_DETECTION(enable) \ + AnnotateEnableRaceDetection(__FILE__, __LINE__, enable) + + /* ------------------------------------------------------------- + Annotations useful for debugging. */ + + /* Report the current thread name to a race detector. */ + #define ANNOTATE_THREAD_NAME(name) \ + AnnotateThreadName(__FILE__, __LINE__, name) + + /* ------------------------------------------------------------- + Annotations useful when implementing locks. They are not + normally needed by modules that merely use locks. + The "lock" argument is a pointer to the lock object. */ + + /* Report that a lock has been created at address "lock". */ + #define ANNOTATE_RWLOCK_CREATE(lock) \ + AnnotateRWLockCreate(__FILE__, __LINE__, lock) + + /* Report that a linker initialized lock has been created at address "lock". + */ +#ifdef THREAD_SANITIZER + #define ANNOTATE_RWLOCK_CREATE_STATIC(lock) \ + AnnotateRWLockCreateStatic(__FILE__, __LINE__, lock) +#else + #define ANNOTATE_RWLOCK_CREATE_STATIC(lock) ANNOTATE_RWLOCK_CREATE(lock) +#endif + + /* Report that the lock at address "lock" is about to be destroyed. */ + #define ANNOTATE_RWLOCK_DESTROY(lock) \ + AnnotateRWLockDestroy(__FILE__, __LINE__, lock) + + /* Report that the lock at address "lock" has been acquired. + is_w=1 for writer lock, is_w=0 for reader lock. */ + #define ANNOTATE_RWLOCK_ACQUIRED(lock, is_w) \ + AnnotateRWLockAcquired(__FILE__, __LINE__, lock, is_w) + + /* Report that the lock at address "lock" is about to be released. */ + #define ANNOTATE_RWLOCK_RELEASED(lock, is_w) \ + AnnotateRWLockReleased(__FILE__, __LINE__, lock, is_w) + +#else /* DYNAMIC_ANNOTATIONS_ENABLED == 0 */ + + #define ANNOTATE_RWLOCK_CREATE(lock) /* empty */ + #define ANNOTATE_RWLOCK_CREATE_STATIC(lock) /* empty */ + #define ANNOTATE_RWLOCK_DESTROY(lock) /* empty */ + #define ANNOTATE_RWLOCK_ACQUIRED(lock, is_w) /* empty */ + #define ANNOTATE_RWLOCK_RELEASED(lock, is_w) /* empty */ + #define ANNOTATE_BENIGN_RACE(address, description) /* empty */ + #define ANNOTATE_BENIGN_RACE_SIZED(address, size, description) /* empty */ + #define ANNOTATE_THREAD_NAME(name) /* empty */ + #define ANNOTATE_ENABLE_RACE_DETECTION(enable) /* empty */ + +#endif /* DYNAMIC_ANNOTATIONS_ENABLED */ + +/* These annotations are also made available to LLVM's Memory Sanitizer */ +#if DYNAMIC_ANNOTATIONS_ENABLED == 1 || defined(MEMORY_SANITIZER) + #define ANNOTATE_MEMORY_IS_INITIALIZED(address, size) \ + AnnotateMemoryIsInitialized(__FILE__, __LINE__, address, size) + + #define ANNOTATE_MEMORY_IS_UNINITIALIZED(address, size) \ + AnnotateMemoryIsUninitialized(__FILE__, __LINE__, address, size) +#else + #define ANNOTATE_MEMORY_IS_INITIALIZED(address, size) /* empty */ + #define ANNOTATE_MEMORY_IS_UNINITIALIZED(address, size) /* empty */ +#endif /* DYNAMIC_ANNOTATIONS_ENABLED || MEMORY_SANITIZER */ + +#if defined(__clang__) && !defined(SWIG) + + #if DYNAMIC_ANNOTATIONS_ENABLED == 0 + #define ANNOTALYSIS_ENABLED + #endif + + /* When running in opt-mode, GCC will issue a warning, if these attributes are + compiled. Only include them when compiling using Clang. */ + #define ATTRIBUTE_IGNORE_READS_BEGIN \ + __attribute((exclusive_lock_function("*"))) + #define ATTRIBUTE_IGNORE_READS_END \ + __attribute((unlock_function("*"))) +#else + #define ATTRIBUTE_IGNORE_READS_BEGIN /* empty */ + #define ATTRIBUTE_IGNORE_READS_END /* empty */ +#endif /* defined(__clang__) && ... */ + +#if (DYNAMIC_ANNOTATIONS_ENABLED != 0) || defined(ANNOTALYSIS_ENABLED) + #define ANNOTATIONS_ENABLED +#endif + +#if (DYNAMIC_ANNOTATIONS_ENABLED != 0) + + /* Request the analysis tool to ignore all reads in the current thread + until ANNOTATE_IGNORE_READS_END is called. + Useful to ignore intentional racey reads, while still checking + other reads and all writes. + See also ANNOTATE_UNPROTECTED_READ. */ + #define ANNOTATE_IGNORE_READS_BEGIN() \ + AnnotateIgnoreReadsBegin(__FILE__, __LINE__) + + /* Stop ignoring reads. */ + #define ANNOTATE_IGNORE_READS_END() \ + AnnotateIgnoreReadsEnd(__FILE__, __LINE__) + + /* Similar to ANNOTATE_IGNORE_READS_BEGIN, but ignore writes instead. */ + #define ANNOTATE_IGNORE_WRITES_BEGIN() \ + AnnotateIgnoreWritesBegin(__FILE__, __LINE__) + + /* Stop ignoring writes. */ + #define ANNOTATE_IGNORE_WRITES_END() \ + AnnotateIgnoreWritesEnd(__FILE__, __LINE__) + +/* Clang provides limited support for static thread-safety analysis + through a feature called Annotalysis. We configure macro-definitions + according to whether Annotalysis support is available. */ +#elif defined(ANNOTALYSIS_ENABLED) + + #define ANNOTATE_IGNORE_READS_BEGIN() \ + StaticAnnotateIgnoreReadsBegin(__FILE__, __LINE__) + + #define ANNOTATE_IGNORE_READS_END() \ + StaticAnnotateIgnoreReadsEnd(__FILE__, __LINE__) + + #define ANNOTATE_IGNORE_WRITES_BEGIN() \ + StaticAnnotateIgnoreWritesBegin(__FILE__, __LINE__) + + #define ANNOTATE_IGNORE_WRITES_END() \ + StaticAnnotateIgnoreWritesEnd(__FILE__, __LINE__) + +#else + #define ANNOTATE_IGNORE_READS_BEGIN() /* empty */ + #define ANNOTATE_IGNORE_READS_END() /* empty */ + #define ANNOTATE_IGNORE_WRITES_BEGIN() /* empty */ + #define ANNOTATE_IGNORE_WRITES_END() /* empty */ +#endif + +/* Implement the ANNOTATE_IGNORE_READS_AND_WRITES_* annotations using the more + primitive annotations defined above. */ +#if defined(ANNOTATIONS_ENABLED) + + /* Start ignoring all memory accesses (both reads and writes). */ + #define ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN() \ + do { \ + ANNOTATE_IGNORE_READS_BEGIN(); \ + ANNOTATE_IGNORE_WRITES_BEGIN(); \ + }while (0) + + /* Stop ignoring both reads and writes. */ + #define ANNOTATE_IGNORE_READS_AND_WRITES_END() \ + do { \ + ANNOTATE_IGNORE_WRITES_END(); \ + ANNOTATE_IGNORE_READS_END(); \ + }while (0) + +#else + #define ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN() /* empty */ + #define ANNOTATE_IGNORE_READS_AND_WRITES_END() /* empty */ +#endif + +/* Use the macros above rather than using these functions directly. */ +#include <stddef.h> +#ifdef __cplusplus +extern "C" { +#endif +void AnnotateRWLockCreate(const char *file, int line, + const volatile void *lock); +void AnnotateRWLockCreateStatic(const char *file, int line, + const volatile void *lock); +void AnnotateRWLockDestroy(const char *file, int line, + const volatile void *lock); +void AnnotateRWLockAcquired(const char *file, int line, + const volatile void *lock, long is_w); /* NOLINT */ +void AnnotateRWLockReleased(const char *file, int line, + const volatile void *lock, long is_w); /* NOLINT */ +void AnnotateBenignRace(const char *file, int line, + const volatile void *address, + const char *description); +void AnnotateBenignRaceSized(const char *file, int line, + const volatile void *address, + size_t size, + const char *description); +void AnnotateThreadName(const char *file, int line, + const char *name); +void AnnotateEnableRaceDetection(const char *file, int line, int enable); +void AnnotateMemoryIsInitialized(const char *file, int line, + const volatile void *mem, size_t size); +void AnnotateMemoryIsUninitialized(const char *file, int line, + const volatile void *mem, size_t size); + +/* Annotations expand to these functions, when Dynamic Annotations are enabled. + These functions are either implemented as no-op calls, if no Sanitizer is + attached, or provided with externally-linked implementations by a library + like ThreadSanitizer. */ +void AnnotateIgnoreReadsBegin(const char *file, int line) + ATTRIBUTE_IGNORE_READS_BEGIN; +void AnnotateIgnoreReadsEnd(const char *file, int line) + ATTRIBUTE_IGNORE_READS_END; +void AnnotateIgnoreWritesBegin(const char *file, int line); +void AnnotateIgnoreWritesEnd(const char *file, int line); + +#if defined(ANNOTALYSIS_ENABLED) +/* When Annotalysis is enabled without Dynamic Annotations, the use of + static-inline functions allows the annotations to be read at compile-time, + while still letting the compiler elide the functions from the final build. + + TODO(delesley) -- The exclusive lock here ignores writes as well, but + allows IGNORE_READS_AND_WRITES to work properly. */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-function" +static inline void StaticAnnotateIgnoreReadsBegin(const char *file, int line) + ATTRIBUTE_IGNORE_READS_BEGIN { (void)file; (void)line; } +static inline void StaticAnnotateIgnoreReadsEnd(const char *file, int line) + ATTRIBUTE_IGNORE_READS_END { (void)file; (void)line; } +static inline void StaticAnnotateIgnoreWritesBegin( + const char *file, int line) { (void)file; (void)line; } +static inline void StaticAnnotateIgnoreWritesEnd( + const char *file, int line) { (void)file; (void)line; } +#pragma GCC diagnostic pop +#endif + +/* Return non-zero value if running under valgrind. + + If "valgrind.h" is included into dynamic_annotations.cc, + the regular valgrind mechanism will be used. + See http://valgrind.org/docs/manual/manual-core-adv.html about + RUNNING_ON_VALGRIND and other valgrind "client requests". + The file "valgrind.h" may be obtained by doing + svn co svn://svn.valgrind.org/valgrind/trunk/include + + If for some reason you can't use "valgrind.h" or want to fake valgrind, + there are two ways to make this function return non-zero: + - Use environment variable: export RUNNING_ON_VALGRIND=1 + - Make your tool intercept the function RunningOnValgrind() and + change its return value. + */ +int RunningOnValgrind(void); + +/* ValgrindSlowdown returns: + * 1.0, if (RunningOnValgrind() == 0) + * 50.0, if (RunningOnValgrind() != 0 && getenv("VALGRIND_SLOWDOWN") == NULL) + * atof(getenv("VALGRIND_SLOWDOWN")) otherwise + This function can be used to scale timeout values: + EXAMPLE: + for (;;) { + DoExpensiveBackgroundTask(); + SleepForSeconds(5 * ValgrindSlowdown()); + } + */ +double ValgrindSlowdown(void); + +#ifdef __cplusplus +} +#endif + +/* ANNOTATE_UNPROTECTED_READ is the preferred way to annotate racey reads. + + Instead of doing + ANNOTATE_IGNORE_READS_BEGIN(); + ... = x; + ANNOTATE_IGNORE_READS_END(); + one can use + ... = ANNOTATE_UNPROTECTED_READ(x); */ +#if defined(__cplusplus) && defined(ANNOTATIONS_ENABLED) +template <typename T> +inline T ANNOTATE_UNPROTECTED_READ(const volatile T &x) { /* NOLINT */ + ANNOTATE_IGNORE_READS_BEGIN(); + T res = x; + ANNOTATE_IGNORE_READS_END(); + return res; + } +#else + #define ANNOTATE_UNPROTECTED_READ(x) (x) +#endif + +#if DYNAMIC_ANNOTATIONS_ENABLED != 0 && defined(__cplusplus) + /* Apply ANNOTATE_BENIGN_RACE_SIZED to a static variable. */ + #define ANNOTATE_BENIGN_RACE_STATIC(static_var, description) \ + namespace { \ + class static_var ## _annotator { \ + public: \ + static_var ## _annotator() { \ + ANNOTATE_BENIGN_RACE_SIZED(&static_var, \ + sizeof(static_var), \ + # static_var ": " description); \ + } \ + }; \ + static static_var ## _annotator the ## static_var ## _annotator;\ + } // namespace +#else /* DYNAMIC_ANNOTATIONS_ENABLED == 0 */ + #define ANNOTATE_BENIGN_RACE_STATIC(static_var, description) /* empty */ +#endif /* DYNAMIC_ANNOTATIONS_ENABLED */ + +#ifdef ADDRESS_SANITIZER +/* Describe the current state of a contiguous container such as e.g. + * std::vector or std::string. For more details see + * sanitizer/common_interface_defs.h, which is provided by the compiler. */ +#include <sanitizer/common_interface_defs.h> +#define ANNOTATE_CONTIGUOUS_CONTAINER(beg, end, old_mid, new_mid) \ + __sanitizer_annotate_contiguous_container(beg, end, old_mid, new_mid) +#define ADDRESS_SANITIZER_REDZONE(name) \ + struct { char x[8] __attribute__ ((aligned (8))); } name +#else +#define ANNOTATE_CONTIGUOUS_CONTAINER(beg, end, old_mid, new_mid) +#define ADDRESS_SANITIZER_REDZONE(name) static_assert(true, "") +#endif // ADDRESS_SANITIZER + +/* Undefine the macros intended only in this file. */ +#undef ANNOTALYSIS_ENABLED +#undef ANNOTATIONS_ENABLED +#undef ATTRIBUTE_IGNORE_READS_BEGIN +#undef ATTRIBUTE_IGNORE_READS_END + +#endif /* ABSL_BASE_DYNAMIC_ANNOTATIONS_H_ */ |