about summary refs log tree commit diff
path: root/templates
diff options
context:
space:
mode:
Diffstat (limited to 'templates')
-rw-r--r--templates/.gitignore2
-rw-r--r--templates/Makefile66
-rw-r--r--templates/branches--1
-rwxr-xr-xtemplates/hooks--applypatch-msg.sample15
-rwxr-xr-xtemplates/hooks--commit-msg.sample24
-rwxr-xr-xtemplates/hooks--fsmonitor-watchman.sample114
-rwxr-xr-xtemplates/hooks--post-update.sample8
-rwxr-xr-xtemplates/hooks--pre-applypatch.sample14
-rwxr-xr-xtemplates/hooks--pre-commit.sample49
-rwxr-xr-xtemplates/hooks--pre-push.sample53
-rwxr-xr-xtemplates/hooks--pre-rebase.sample169
-rwxr-xr-xtemplates/hooks--pre-receive.sample24
-rwxr-xr-xtemplates/hooks--prepare-commit-msg.sample42
-rwxr-xr-xtemplates/hooks--update.sample128
-rw-r--r--templates/info--exclude6
-rw-r--r--templates/this--description1
16 files changed, 716 insertions, 0 deletions
diff --git a/templates/.gitignore b/templates/.gitignore
new file mode 100644
index 000000000000..6759ecbf98f8
--- /dev/null
+++ b/templates/.gitignore
@@ -0,0 +1,2 @@
+blt
+boilerplates.made
diff --git a/templates/Makefile b/templates/Makefile
new file mode 100644
index 000000000000..d22a71a3999b
--- /dev/null
+++ b/templates/Makefile
@@ -0,0 +1,66 @@
+# make and install sample templates
+
+ifndef V
+	QUIET = @
+endif
+
+INSTALL ?= install
+TAR ?= tar
+RM ?= rm -f
+prefix ?= $(HOME)
+template_instdir ?= $(prefix)/share/git-core/templates
+# DESTDIR=
+
+ifndef SHELL_PATH
+	SHELL_PATH = /bin/sh
+endif
+ifndef PERL_PATH
+	PERL_PATH = perl
+endif
+
+SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
+PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
+
+# Shell quote (do not use $(call) to accommodate ancient setups);
+DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
+template_instdir_SQ = $(subst ','\'',$(template_instdir))
+
+all: boilerplates.made custom
+
+# Put templates that can be copied straight from the source
+# in a file direc--tory--file in the source.  They will be
+# just copied to the destination.
+
+bpsrc = $(filter-out %~,$(wildcard *--*))
+boilerplates.made : $(bpsrc)
+	$(QUIET)umask 022 && ls *--* 2>/dev/null | \
+	while read boilerplate; \
+	do \
+		case "$$boilerplate" in *~) continue ;; esac && \
+		dst=`echo "$$boilerplate" | sed -e 's|^this|.|;s|--|/|g'` && \
+		dir=`expr "$$dst" : '\(.*\)/'` && \
+		mkdir -p blt/$$dir && \
+		case "$$boilerplate" in \
+		*--) continue;; \
+		esac && \
+		sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
+		    -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \
+		    -e 's|@PERL_PATH@|$(PERL_PATH_SQ)|g' $$boilerplate > \
+			blt/$$dst && \
+		if test -x "$$boilerplate"; then rx=rx; else rx=r; fi && \
+		chmod a+$$rx "blt/$$dst" || exit; \
+	done && \
+	date >$@
+
+# If you need build-tailored templates, build them into blt/
+# directory yourself here.
+custom:
+	$(QUIET): no custom templates yet
+
+clean:
+	$(RM) -r blt boilerplates.made
+
+install: all
+	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(template_instdir_SQ)'
+	(cd blt && $(TAR) cf - .) | \
+	(cd '$(DESTDIR_SQ)$(template_instdir_SQ)' && umask 022 && $(TAR) xof -)
diff --git a/templates/branches-- b/templates/branches--
new file mode 100644
index 000000000000..fae88709a636
--- /dev/null
+++ b/templates/branches--
@@ -0,0 +1 @@
+: this is just to ensure the directory exists.
diff --git a/templates/hooks--applypatch-msg.sample b/templates/hooks--applypatch-msg.sample
new file mode 100755
index 000000000000..a5d7b84a6734
--- /dev/null
+++ b/templates/hooks--applypatch-msg.sample
@@ -0,0 +1,15 @@
+#!/bin/sh
+#
+# An example hook script to check the commit log message taken by
+# applypatch from an e-mail message.
+#
+# The hook should exit with non-zero status after issuing an
+# appropriate message if it wants to stop the commit.  The hook is
+# allowed to edit the commit message file.
+#
+# To enable this hook, rename this file to "applypatch-msg".
+
+. git-sh-setup
+commitmsg="$(git rev-parse --git-path hooks/commit-msg)"
+test -x "$commitmsg" && exec "$commitmsg" ${1+"$@"}
+:
diff --git a/templates/hooks--commit-msg.sample b/templates/hooks--commit-msg.sample
new file mode 100755
index 000000000000..b58d1184a9d4
--- /dev/null
+++ b/templates/hooks--commit-msg.sample
@@ -0,0 +1,24 @@
+#!/bin/sh
+#
+# An example hook script to check the commit log message.
+# Called by "git commit" with one argument, the name of the file
+# that has the commit message.  The hook should exit with non-zero
+# status after issuing an appropriate message if it wants to stop the
+# commit.  The hook is allowed to edit the commit message file.
+#
+# To enable this hook, rename this file to "commit-msg".
+
+# Uncomment the below to add a Signed-off-by line to the message.
+# Doing this in a hook is a bad idea in general, but the prepare-commit-msg
+# hook is more suited to it.
+#
+# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
+# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
+
+# This example catches duplicate Signed-off-by lines.
+
+test "" = "$(grep '^Signed-off-by: ' "$1" |
+	 sort | uniq -c | sed -e '/^[ 	]*1[ 	]/d')" || {
+	echo >&2 Duplicate Signed-off-by lines.
+	exit 1
+}
diff --git a/templates/hooks--fsmonitor-watchman.sample b/templates/hooks--fsmonitor-watchman.sample
new file mode 100755
index 000000000000..e673bb3980f3
--- /dev/null
+++ b/templates/hooks--fsmonitor-watchman.sample
@@ -0,0 +1,114 @@
+#!/usr/bin/perl
+
+use strict;
+use warnings;
+use IPC::Open2;
+
+# An example hook script to integrate Watchman
+# (https://facebook.github.io/watchman/) with git to speed up detecting
+# new and modified files.
+#
+# The hook is passed a version (currently 1) and a time in nanoseconds
+# formatted as a string and outputs to stdout all files that have been
+# modified since the given time. Paths must be relative to the root of
+# the working tree and separated by a single NUL.
+#
+# To enable this hook, rename this file to "query-watchman" and set
+# 'git config core.fsmonitor .git/hooks/query-watchman'
+#
+my ($version, $time) = @ARGV;
+
+# Check the hook interface version
+
+if ($version == 1) {
+	# convert nanoseconds to seconds
+	$time = int $time / 1000000000;
+} else {
+	die "Unsupported query-fsmonitor hook version '$version'.\n" .
+	    "Falling back to scanning...\n";
+}
+
+my $git_work_tree;
+if ($^O =~ 'msys' || $^O =~ 'cygwin') {
+	$git_work_tree = Win32::GetCwd();
+	$git_work_tree =~ tr/\\/\//;
+} else {
+	require Cwd;
+	$git_work_tree = Cwd::cwd();
+}
+
+my $retry = 1;
+
+launch_watchman();
+
+sub launch_watchman {
+
+	my $pid = open2(\*CHLD_OUT, \*CHLD_IN, 'watchman -j --no-pretty')
+	    or die "open2() failed: $!\n" .
+	    "Falling back to scanning...\n";
+
+	# In the query expression below we're asking for names of files that
+	# changed since $time but were not transient (ie created after
+	# $time but no longer exist).
+	#
+	# To accomplish this, we're using the "since" generator to use the
+	# recency index to select candidate nodes and "fields" to limit the
+	# output to file names only. Then we're using the "expression" term to
+	# further constrain the results.
+	#
+	# The category of transient files that we want to ignore will have a
+	# creation clock (cclock) newer than $time_t value and will also not
+	# currently exist.
+
+	my $query = <<"	END";
+		["query", "$git_work_tree", {
+			"since": $time,
+			"fields": ["name"],
+			"expression": ["not", ["allof", ["since", $time, "cclock"], ["not", "exists"]]]
+		}]
+	END
+
+	print CHLD_IN $query;
+	close CHLD_IN;
+	my $response = do {local $/; <CHLD_OUT>};
+
+	die "Watchman: command returned no output.\n" .
+	    "Falling back to scanning...\n" if $response eq "";
+	die "Watchman: command returned invalid output: $response\n" .
+	    "Falling back to scanning...\n" unless $response =~ /^\{/;
+
+	my $json_pkg;
+	eval {
+		require JSON::XS;
+		$json_pkg = "JSON::XS";
+		1;
+	} or do {
+		require JSON::PP;
+		$json_pkg = "JSON::PP";
+	};
+
+	my $o = $json_pkg->new->utf8->decode($response);
+
+	if ($retry > 0 and $o->{error} and $o->{error} =~ m/unable to resolve root .* directory (.*) is not watched/) {
+		print STDERR "Adding '$git_work_tree' to watchman's watch list.\n";
+		$retry--;
+		qx/watchman watch "$git_work_tree"/;
+		die "Failed to make watchman watch '$git_work_tree'.\n" .
+		    "Falling back to scanning...\n" if $? != 0;
+
+		# Watchman will always return all files on the first query so
+		# return the fast "everything is dirty" flag to git and do the
+		# Watchman query just to get it over with now so we won't pay
+		# the cost in git to look up each individual file.
+		print "/\0";
+		eval { launch_watchman() };
+		exit 0;
+	}
+
+	die "Watchman: $o->{error}.\n" .
+	    "Falling back to scanning...\n" if $o->{error};
+
+	binmode STDOUT, ":utf8";
+	local $, = "\0";
+	print @{$o->{files}};
+}
diff --git a/templates/hooks--post-update.sample b/templates/hooks--post-update.sample
new file mode 100755
index 000000000000..ec17ec1939b7
--- /dev/null
+++ b/templates/hooks--post-update.sample
@@ -0,0 +1,8 @@
+#!/bin/sh
+#
+# An example hook script to prepare a packed repository for use over
+# dumb transports.
+#
+# To enable this hook, rename this file to "post-update".
+
+exec git update-server-info
diff --git a/templates/hooks--pre-applypatch.sample b/templates/hooks--pre-applypatch.sample
new file mode 100755
index 000000000000..4142082bcb93
--- /dev/null
+++ b/templates/hooks--pre-applypatch.sample
@@ -0,0 +1,14 @@
+#!/bin/sh
+#
+# An example hook script to verify what is about to be committed
+# by applypatch from an e-mail message.
+#
+# The hook should exit with non-zero status after issuing an
+# appropriate message if it wants to stop the commit.
+#
+# To enable this hook, rename this file to "pre-applypatch".
+
+. git-sh-setup
+precommit="$(git rev-parse --git-path hooks/pre-commit)"
+test -x "$precommit" && exec "$precommit" ${1+"$@"}
+:
diff --git a/templates/hooks--pre-commit.sample b/templates/hooks--pre-commit.sample
new file mode 100755
index 000000000000..6a756416384c
--- /dev/null
+++ b/templates/hooks--pre-commit.sample
@@ -0,0 +1,49 @@
+#!/bin/sh
+#
+# An example hook script to verify what is about to be committed.
+# Called by "git commit" with no arguments.  The hook should
+# exit with non-zero status after issuing an appropriate message if
+# it wants to stop the commit.
+#
+# To enable this hook, rename this file to "pre-commit".
+
+if git rev-parse --verify HEAD >/dev/null 2>&1
+then
+	against=HEAD
+else
+	# Initial commit: diff against an empty tree object
+	against=$(git hash-object -t tree /dev/null)
+fi
+
+# If you want to allow non-ASCII filenames set this variable to true.
+allownonascii=$(git config --bool hooks.allownonascii)
+
+# Redirect output to stderr.
+exec 1>&2
+
+# Cross platform projects tend to avoid non-ASCII filenames; prevent
+# them from being added to the repository. We exploit the fact that the
+# printable range starts at the space character and ends with tilde.
+if [ "$allownonascii" != "true" ] &&
+	# Note that the use of brackets around a tr range is ok here, (it's
+	# even required, for portability to Solaris 10's /usr/bin/tr), since
+	# the square bracket bytes happen to fall in the designated range.
+	test $(git diff --cached --name-only --diff-filter=A -z $against |
+	  LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0
+then
+	cat <<\EOF
+Error: Attempt to add a non-ASCII file name.
+
+This can cause problems if you want to work with people on other platforms.
+
+To be portable it is advisable to rename the file.
+
+If you know what you are doing you can disable this check using:
+
+  git config hooks.allownonascii true
+EOF
+	exit 1
+fi
+
+# If there are whitespace errors, print the offending file names and fail.
+exec git diff-index --check --cached $against --
diff --git a/templates/hooks--pre-push.sample b/templates/hooks--pre-push.sample
new file mode 100755
index 000000000000..6187dbf4390f
--- /dev/null
+++ b/templates/hooks--pre-push.sample
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# An example hook script to verify what is about to be pushed.  Called by "git
+# push" after it has checked the remote status, but before anything has been
+# pushed.  If this script exits with a non-zero status nothing will be pushed.
+#
+# This hook is called with the following parameters:
+#
+# $1 -- Name of the remote to which the push is being done
+# $2 -- URL to which the push is being done
+#
+# If pushing without using a named remote those arguments will be equal.
+#
+# Information about the commits which are being pushed is supplied as lines to
+# the standard input in the form:
+#
+#   <local ref> <local sha1> <remote ref> <remote sha1>
+#
+# This sample shows how to prevent push of commits where the log message starts
+# with "WIP" (work in progress).
+
+remote="$1"
+url="$2"
+
+z40=0000000000000000000000000000000000000000
+
+while read local_ref local_sha remote_ref remote_sha
+do
+	if [ "$local_sha" = $z40 ]
+	then
+		# Handle delete
+		:
+	else
+		if [ "$remote_sha" = $z40 ]
+		then
+			# New branch, examine all commits
+			range="$local_sha"
+		else
+			# Update to existing branch, examine new commits
+			range="$remote_sha..$local_sha"
+		fi
+
+		# Check for WIP commit
+		commit=`git rev-list -n 1 --grep '^WIP' "$range"`
+		if [ -n "$commit" ]
+		then
+			echo >&2 "Found WIP commit in $local_ref, not pushing"
+			exit 1
+		fi
+	fi
+done
+
+exit 0
diff --git a/templates/hooks--pre-rebase.sample b/templates/hooks--pre-rebase.sample
new file mode 100755
index 000000000000..db5feab8a1ee
--- /dev/null
+++ b/templates/hooks--pre-rebase.sample
@@ -0,0 +1,169 @@
+#!/bin/sh
+#
+# Copyright (c) 2006, 2008 Junio C Hamano
+#
+# The "pre-rebase" hook is run just before "git rebase" starts doing
+# its job, and can prevent the command from running by exiting with
+# non-zero status.
+#
+# The hook is called with the following parameters:
+#
+# $1 -- the upstream the series was forked from.
+# $2 -- the branch being rebased (or empty when rebasing the current branch).
+#
+# This sample shows how to prevent topic branches that are already
+# merged to 'next' branch from getting rebased, because allowing it
+# would result in rebasing already published history.
+
+publish=next
+basebranch="$1"
+if test "$#" = 2
+then
+	topic="refs/heads/$2"
+else
+	topic=`git symbolic-ref HEAD` ||
+	exit 0 ;# we do not interrupt rebasing detached HEAD
+fi
+
+case "$topic" in
+refs/heads/??/*)
+	;;
+*)
+	exit 0 ;# we do not interrupt others.
+	;;
+esac
+
+# Now we are dealing with a topic branch being rebased
+# on top of master.  Is it OK to rebase it?
+
+# Does the topic really exist?
+git show-ref -q "$topic" || {
+	echo >&2 "No such branch $topic"
+	exit 1
+}
+
+# Is topic fully merged to master?
+not_in_master=`git rev-list --pretty=oneline ^master "$topic"`
+if test -z "$not_in_master"
+then
+	echo >&2 "$topic is fully merged to master; better remove it."
+	exit 1 ;# we could allow it, but there is no point.
+fi
+
+# Is topic ever merged to next?  If so you should not be rebasing it.
+only_next_1=`git rev-list ^master "^$topic" ${publish} | sort`
+only_next_2=`git rev-list ^master           ${publish} | sort`
+if test "$only_next_1" = "$only_next_2"
+then
+	not_in_topic=`git rev-list "^$topic" master`
+	if test -z "$not_in_topic"
+	then
+		echo >&2 "$topic is already up to date with master"
+		exit 1 ;# we could allow it, but there is no point.
+	else
+		exit 0
+	fi
+else
+	not_in_next=`git rev-list --pretty=oneline ^${publish} "$topic"`
+	@PERL_PATH@ -e '
+		my $topic = $ARGV[0];
+		my $msg = "* $topic has commits already merged to public branch:\n";
+		my (%not_in_next) = map {
+			/^([0-9a-f]+) /;
+			($1 => 1);
+		} split(/\n/, $ARGV[1]);
+		for my $elem (map {
+				/^([0-9a-f]+) (.*)$/;
+				[$1 => $2];
+			} split(/\n/, $ARGV[2])) {
+			if (!exists $not_in_next{$elem->[0]}) {
+				if ($msg) {
+					print STDERR $msg;
+					undef $msg;
+				}
+				print STDERR " $elem->[1]\n";
+			}
+		}
+	' "$topic" "$not_in_next" "$not_in_master"
+	exit 1
+fi
+
+<<\DOC_END
+
+This sample hook safeguards topic branches that have been
+published from being rewound.
+
+The workflow assumed here is:
+
+ * Once a topic branch forks from "master", "master" is never
+   merged into it again (either directly or indirectly).
+
+ * Once a topic branch is fully cooked and merged into "master",
+   it is deleted.  If you need to build on top of it to correct
+   earlier mistakes, a new topic branch is created by forking at
+   the tip of the "master".  This is not strictly necessary, but
+   it makes it easier to keep your history simple.
+
+ * Whenever you need to test or publish your changes to topic
+   branches, merge them into "next" branch.
+
+The script, being an example, hardcodes the publish branch name
+to be "next", but it is trivial to make it configurable via
+$GIT_DIR/config mechanism.
+
+With this workflow, you would want to know:
+
+(1) ... if a topic branch has ever been merged to "next".  Young
+    topic branches can have stupid mistakes you would rather
+    clean up before publishing, and things that have not been
+    merged into other branches can be easily rebased without
+    affecting other people.  But once it is published, you would
+    not want to rewind it.
+
+(2) ... if a topic branch has been fully merged to "master".
+    Then you can delete it.  More importantly, you should not
+    build on top of it -- other people may already want to
+    change things related to the topic as patches against your
+    "master", so if you need further changes, it is better to
+    fork the topic (perhaps with the same name) afresh from the
+    tip of "master".
+
+Let's look at this example:
+
+		   o---o---o---o---o---o---o---o---o---o "next"
+		  /       /           /           /
+		 /   a---a---b A     /           /
+		/   /               /           /
+	       /   /   c---c---c---c B         /
+	      /   /   /             \         /
+	     /   /   /   b---b C     \       /
+	    /   /   /   /             \     /
+    ---o---o---o---o---o---o---o---o---o---o---o "master"
+
+
+A, B and C are topic branches.
+
+ * A has one fix since it was merged up to "next".
+
+ * B has finished.  It has been fully merged up to "master" and "next",
+   and is ready to be deleted.
+
+ * C has not merged to "next" at all.
+
+We would want to allow C to be rebased, refuse A, and encourage
+B to be deleted.
+
+To compute (1):
+
+	git rev-list ^master ^topic next
+	git rev-list ^master        next
+
+	if these match, topic has not merged in next at all.
+
+To compute (2):
+
+	git rev-list master..topic
+
+	if this is empty, it is fully merged to "master".
+
+DOC_END
diff --git a/templates/hooks--pre-receive.sample b/templates/hooks--pre-receive.sample
new file mode 100755
index 000000000000..a1fd29ec1482
--- /dev/null
+++ b/templates/hooks--pre-receive.sample
@@ -0,0 +1,24 @@
+#!/bin/sh
+#
+# An example hook script to make use of push options.
+# The example simply echoes all push options that start with 'echoback='
+# and rejects all pushes when the "reject" push option is used.
+#
+# To enable this hook, rename this file to "pre-receive".
+
+if test -n "$GIT_PUSH_OPTION_COUNT"
+then
+	i=0
+	while test "$i" -lt "$GIT_PUSH_OPTION_COUNT"
+	do
+		eval "value=\$GIT_PUSH_OPTION_$i"
+		case "$value" in
+		echoback=*)
+			echo "echo from the pre-receive-hook: ${value#*=}" >&2
+			;;
+		reject)
+			exit 1
+		esac
+		i=$((i + 1))
+	done
+fi
diff --git a/templates/hooks--prepare-commit-msg.sample b/templates/hooks--prepare-commit-msg.sample
new file mode 100755
index 000000000000..318afe3fd865
--- /dev/null
+++ b/templates/hooks--prepare-commit-msg.sample
@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+# An example hook script to prepare the commit log message.
+# Called by "git commit" with the name of the file that has the
+# commit message, followed by the description of the commit
+# message's source.  The hook's purpose is to edit the commit
+# message file.  If the hook fails with a non-zero status,
+# the commit is aborted.
+#
+# To enable this hook, rename this file to "prepare-commit-msg".
+
+# This hook includes three examples. The first one removes the
+# "# Please enter the commit message..." help message.
+#
+# The second includes the output of "git diff --name-status -r"
+# into the message, just before the "git status" output.  It is
+# commented because it doesn't cope with --amend or with squashed
+# commits.
+#
+# The third example adds a Signed-off-by line to the message, that can
+# still be edited.  This is rarely a good idea.
+
+COMMIT_MSG_FILE=$1
+COMMIT_SOURCE=$2
+SHA1=$3
+
+@PERL_PATH@ -i.bak -ne 'print unless(m/^. Please enter the commit message/..m/^#$/)' "$COMMIT_MSG_FILE"
+
+# case "$COMMIT_SOURCE,$SHA1" in
+#  ,|template,)
+#    @PERL_PATH@ -i.bak -pe '
+#       print "\n" . `git diff --cached --name-status -r`
+# 	 if /^#/ && $first++ == 0' "$COMMIT_MSG_FILE" ;;
+#  *) ;;
+# esac
+
+# SOB=$(git var GIT_COMMITTER_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
+# git interpret-trailers --in-place --trailer "$SOB" "$COMMIT_MSG_FILE"
+# if test -z "$COMMIT_SOURCE"
+# then
+#   @PERL_PATH@ -i.bak -pe 'print "\n" if !$first_line++' "$COMMIT_MSG_FILE"
+# fi
diff --git a/templates/hooks--update.sample b/templates/hooks--update.sample
new file mode 100755
index 000000000000..80ba94135cc3
--- /dev/null
+++ b/templates/hooks--update.sample
@@ -0,0 +1,128 @@
+#!/bin/sh
+#
+# An example hook script to block unannotated tags from entering.
+# Called by "git receive-pack" with arguments: refname sha1-old sha1-new
+#
+# To enable this hook, rename this file to "update".
+#
+# Config
+# ------
+# hooks.allowunannotated
+#   This boolean sets whether unannotated tags will be allowed into the
+#   repository.  By default they won't be.
+# hooks.allowdeletetag
+#   This boolean sets whether deleting tags will be allowed in the
+#   repository.  By default they won't be.
+# hooks.allowmodifytag
+#   This boolean sets whether a tag may be modified after creation. By default
+#   it won't be.
+# hooks.allowdeletebranch
+#   This boolean sets whether deleting branches will be allowed in the
+#   repository.  By default they won't be.
+# hooks.denycreatebranch
+#   This boolean sets whether remotely creating branches will be denied
+#   in the repository.  By default this is allowed.
+#
+
+# --- Command line
+refname="$1"
+oldrev="$2"
+newrev="$3"
+
+# --- Safety check
+if [ -z "$GIT_DIR" ]; then
+	echo "Don't run this script from the command line." >&2
+	echo " (if you want, you could supply GIT_DIR then run" >&2
+	echo "  $0 <ref> <oldrev> <newrev>)" >&2
+	exit 1
+fi
+
+if [ -z "$refname" -o -z "$oldrev" -o -z "$newrev" ]; then
+	echo "usage: $0 <ref> <oldrev> <newrev>" >&2
+	exit 1
+fi
+
+# --- Config
+allowunannotated=$(git config --bool hooks.allowunannotated)
+allowdeletebranch=$(git config --bool hooks.allowdeletebranch)
+denycreatebranch=$(git config --bool hooks.denycreatebranch)
+allowdeletetag=$(git config --bool hooks.allowdeletetag)
+allowmodifytag=$(git config --bool hooks.allowmodifytag)
+
+# check for no description
+projectdesc=$(sed -e '1q' "$GIT_DIR/description")
+case "$projectdesc" in
+"Unnamed repository"* | "")
+	echo "*** Project description file hasn't been set" >&2
+	exit 1
+	;;
+esac
+
+# --- Check types
+# if $newrev is 0000...0000, it's a commit to delete a ref.
+zero="0000000000000000000000000000000000000000"
+if [ "$newrev" = "$zero" ]; then
+	newrev_type=delete
+else
+	newrev_type=$(git cat-file -t $newrev)
+fi
+
+case "$refname","$newrev_type" in
+	refs/tags/*,commit)
+		# un-annotated tag
+		short_refname=${refname##refs/tags/}
+		if [ "$allowunannotated" != "true" ]; then
+			echo "*** The un-annotated tag, $short_refname, is not allowed in this repository" >&2
+			echo "*** Use 'git tag [ -a | -s ]' for tags you want to propagate." >&2
+			exit 1
+		fi
+		;;
+	refs/tags/*,delete)
+		# delete tag
+		if [ "$allowdeletetag" != "true" ]; then
+			echo "*** Deleting a tag is not allowed in this repository" >&2
+			exit 1
+		fi
+		;;
+	refs/tags/*,tag)
+		# annotated tag
+		if [ "$allowmodifytag" != "true" ] && git rev-parse $refname > /dev/null 2>&1
+		then
+			echo "*** Tag '$refname' already exists." >&2
+			echo "*** Modifying a tag is not allowed in this repository." >&2
+			exit 1
+		fi
+		;;
+	refs/heads/*,commit)
+		# branch
+		if [ "$oldrev" = "$zero" -a "$denycreatebranch" = "true" ]; then
+			echo "*** Creating a branch is not allowed in this repository" >&2
+			exit 1
+		fi
+		;;
+	refs/heads/*,delete)
+		# delete branch
+		if [ "$allowdeletebranch" != "true" ]; then
+			echo "*** Deleting a branch is not allowed in this repository" >&2
+			exit 1
+		fi
+		;;
+	refs/remotes/*,commit)
+		# tracking branch
+		;;
+	refs/remotes/*,delete)
+		# delete tracking branch
+		if [ "$allowdeletebranch" != "true" ]; then
+			echo "*** Deleting a tracking branch is not allowed in this repository" >&2
+			exit 1
+		fi
+		;;
+	*)
+		# Anything else (is there anything else?)
+		echo "*** Update hook: unknown type of update to ref $refname of type $newrev_type" >&2
+		exit 1
+		;;
+esac
+
+# --- Finished
+exit 0
diff --git a/templates/info--exclude b/templates/info--exclude
new file mode 100644
index 000000000000..a5196d1be8fb
--- /dev/null
+++ b/templates/info--exclude
@@ -0,0 +1,6 @@
+# git ls-files --others --exclude-from=.git/info/exclude
+# Lines that start with '#' are comments.
+# For a project mostly in C, the following would be a good set of
+# exclude patterns (uncomment them if you want to use them):
+# *.[oa]
+# *~
diff --git a/templates/this--description b/templates/this--description
new file mode 100644
index 000000000000..498b267a8c78
--- /dev/null
+++ b/templates/this--description
@@ -0,0 +1 @@
+Unnamed repository; edit this file 'description' to name the repository.