diff options
Diffstat (limited to 't/t3700-add.sh')
| -rwxr-xr-x | t/t3700-add.sh | 424 |
1 files changed, 424 insertions, 0 deletions
diff --git a/t/t3700-add.sh b/t/t3700-add.sh new file mode 100755 index 000000000000..c325167b9031 --- /dev/null +++ b/t/t3700-add.sh @@ -0,0 +1,424 @@ +#!/bin/sh +# +# Copyright (c) 2006 Carl D. Worth +# + +test_description='Test of git add, including the -- option.' + +. ./test-lib.sh + +# Test the file mode "$1" of the file "$2" in the index. +test_mode_in_index () { + case "$(git ls-files -s "$2")" in + "$1 "*" $2") + echo pass + ;; + *) + echo fail + git ls-files -s "$2" + return 1 + ;; + esac +} + +test_expect_success \ + 'Test of git add' \ + 'touch foo && git add foo' + +test_expect_success \ + 'Post-check that foo is in the index' \ + 'git ls-files foo | grep foo' + +test_expect_success \ + 'Test that "git add -- -q" works' \ + 'touch -- -q && git add -- -q' + +test_expect_success \ + 'git add: Test that executable bit is not used if core.filemode=0' \ + 'git config core.filemode 0 && + echo foo >xfoo1 && + chmod 755 xfoo1 && + git add xfoo1 && + test_mode_in_index 100644 xfoo1' + +test_expect_success 'git add: filemode=0 should not get confused by symlink' ' + rm -f xfoo1 && + test_ln_s_add foo xfoo1 && + test_mode_in_index 120000 xfoo1 +' + +test_expect_success \ + 'git update-index --add: Test that executable bit is not used...' \ + 'git config core.filemode 0 && + echo foo >xfoo2 && + chmod 755 xfoo2 && + git update-index --add xfoo2 && + test_mode_in_index 100644 xfoo2' + +test_expect_success 'git add: filemode=0 should not get confused by symlink' ' + rm -f xfoo2 && + test_ln_s_add foo xfoo2 && + test_mode_in_index 120000 xfoo2 +' + +test_expect_success \ + 'git update-index --add: Test that executable bit is not used...' \ + 'git config core.filemode 0 && + test_ln_s_add xfoo2 xfoo3 && # runs git update-index --add + test_mode_in_index 120000 xfoo3' + +test_expect_success '.gitignore test setup' ' + echo "*.ig" >.gitignore && + mkdir c.if d.ig && + >a.ig && >b.if && + >c.if/c.if && >c.if/c.ig && + >d.ig/d.if && >d.ig/d.ig +' + +test_expect_success '.gitignore is honored' ' + git add . && + ! (git ls-files | grep "\\.ig") +' + +test_expect_success 'error out when attempting to add ignored ones without -f' ' + test_must_fail git add a.?? && + ! (git ls-files | grep "\\.ig") +' + +test_expect_success 'error out when attempting to add ignored ones without -f' ' + test_must_fail git add d.?? && + ! (git ls-files | grep "\\.ig") +' + +test_expect_success 'error out when attempting to add ignored ones but add others' ' + touch a.if && + test_must_fail git add a.?? && + ! (git ls-files | grep "\\.ig") && + (git ls-files | grep a.if) +' + +test_expect_success 'add ignored ones with -f' ' + git add -f a.?? && + git ls-files --error-unmatch a.ig +' + +test_expect_success 'add ignored ones with -f' ' + git add -f d.??/* && + git ls-files --error-unmatch d.ig/d.if d.ig/d.ig +' + +test_expect_success 'add ignored ones with -f' ' + rm -f .git/index && + git add -f d.?? && + git ls-files --error-unmatch d.ig/d.if d.ig/d.ig +' + +test_expect_success '.gitignore with subdirectory' ' + + rm -f .git/index && + mkdir -p sub/dir && + echo "!dir/a.*" >sub/.gitignore && + >sub/a.ig && + >sub/dir/a.ig && + git add sub/dir && + git ls-files --error-unmatch sub/dir/a.ig && + rm -f .git/index && + ( + cd sub/dir && + git add . + ) && + git ls-files --error-unmatch sub/dir/a.ig +' + +mkdir 1 1/2 1/3 +touch 1/2/a 1/3/b 1/2/c +test_expect_success 'check correct prefix detection' ' + rm -f .git/index && + git add 1/2/a 1/3/b 1/2/c +' + +test_expect_success 'git add with filemode=0, symlinks=0, and unmerged entries' ' + for s in 1 2 3 + do + echo $s > stage$s + echo "100755 $(git hash-object -w stage$s) $s file" + echo "120000 $(printf $s | git hash-object -w -t blob --stdin) $s symlink" + done | git update-index --index-info && + git config core.filemode 0 && + git config core.symlinks 0 && + echo new > file && + echo new > symlink && + git add file symlink && + git ls-files --stage | grep "^100755 .* 0 file$" && + git ls-files --stage | grep "^120000 .* 0 symlink$" +' + +test_expect_success 'git add with filemode=0, symlinks=0 prefers stage 2 over stage 1' ' + git rm --cached -f file symlink && + ( + echo "100644 $(git hash-object -w stage1) 1 file" && + echo "100755 $(git hash-object -w stage2) 2 file" && + echo "100644 $(printf 1 | git hash-object -w -t blob --stdin) 1 symlink" && + echo "120000 $(printf 2 | git hash-object -w -t blob --stdin) 2 symlink" + ) | git update-index --index-info && + git config core.filemode 0 && + git config core.symlinks 0 && + echo new > file && + echo new > symlink && + git add file symlink && + git ls-files --stage | grep "^100755 .* 0 file$" && + git ls-files --stage | grep "^120000 .* 0 symlink$" +' + +test_expect_success 'git add --refresh' ' + >foo && git add foo && git commit -a -m "commit all" && + test -z "$(git diff-index HEAD -- foo)" && + git read-tree HEAD && + case "$(git diff-index HEAD -- foo)" in + :100644" "*"M foo") echo pass;; + *) echo fail; (exit 1);; + esac && + git add --refresh -- foo && + test -z "$(git diff-index HEAD -- foo)" +' + +test_expect_success 'git add --refresh with pathspec' ' + git reset --hard && + echo >foo && echo >bar && echo >baz && + git add foo bar baz && H=$(git rev-parse :foo) && git rm -f foo && + echo "100644 $H 3 foo" | git update-index --index-info && + test-tool chmtime -60 bar baz && + git add --refresh bar >actual && + test_must_be_empty actual && + + git diff-files --name-only >actual && + ! grep bar actual&& + grep baz actual +' + +test_expect_success POSIXPERM,SANITY 'git add should fail atomically upon an unreadable file' ' + git reset --hard && + date >foo1 && + date >foo2 && + chmod 0 foo2 && + test_must_fail git add --verbose . && + ! ( git ls-files foo1 | grep foo1 ) +' + +rm -f foo2 + +test_expect_success POSIXPERM,SANITY 'git add --ignore-errors' ' + git reset --hard && + date >foo1 && + date >foo2 && + chmod 0 foo2 && + test_must_fail git add --verbose --ignore-errors . && + git ls-files foo1 | grep foo1 +' + +rm -f foo2 + +test_expect_success POSIXPERM,SANITY 'git add (add.ignore-errors)' ' + git config add.ignore-errors 1 && + git reset --hard && + date >foo1 && + date >foo2 && + chmod 0 foo2 && + test_must_fail git add --verbose . && + git ls-files foo1 | grep foo1 +' +rm -f foo2 + +test_expect_success POSIXPERM,SANITY 'git add (add.ignore-errors = false)' ' + git config add.ignore-errors 0 && + git reset --hard && + date >foo1 && + date >foo2 && + chmod 0 foo2 && + test_must_fail git add --verbose . && + ! ( git ls-files foo1 | grep foo1 ) +' +rm -f foo2 + +test_expect_success POSIXPERM,SANITY '--no-ignore-errors overrides config' ' + git config add.ignore-errors 1 && + git reset --hard && + date >foo1 && + date >foo2 && + chmod 0 foo2 && + test_must_fail git add --verbose --no-ignore-errors . && + ! ( git ls-files foo1 | grep foo1 ) && + git config add.ignore-errors 0 +' +rm -f foo2 + +test_expect_success BSLASHPSPEC "git add 'fo\\[ou\\]bar' ignores foobar" ' + git reset --hard && + touch fo\[ou\]bar foobar && + git add '\''fo\[ou\]bar'\'' && + git ls-files fo\[ou\]bar | fgrep fo\[ou\]bar && + ! ( git ls-files foobar | grep foobar ) +' + +test_expect_success 'git add to resolve conflicts on otherwise ignored path' ' + git reset --hard && + H=$(git rev-parse :1/2/a) && + ( + echo "100644 $H 1 track-this" && + echo "100644 $H 3 track-this" + ) | git update-index --index-info && + echo track-this >>.gitignore && + echo resolved >track-this && + git add track-this +' + +test_expect_success '"add non-existent" should fail' ' + test_must_fail git add non-existent && + ! (git ls-files | grep "non-existent") +' + +test_expect_success 'git add -A on empty repo does not error out' ' + rm -fr empty && + git init empty && + ( + cd empty && + git add -A . && + git add -A + ) +' + +test_expect_success '"git add ." in empty repo' ' + rm -fr empty && + git init empty && + ( + cd empty && + git add . + ) +' + +test_expect_success 'error on a repository with no commits' ' + rm -fr empty && + git init empty && + test_must_fail git add empty >actual 2>&1 && + cat >expect <<-EOF && + error: '"'empty/'"' does not have a commit checked out + fatal: adding files failed + EOF + test_i18ncmp expect actual +' + +test_expect_success 'git add --dry-run of existing changed file' " + echo new >>track-this && + git add --dry-run track-this >actual 2>&1 && + echo \"add 'track-this'\" | test_cmp - actual +" + +test_expect_success 'git add --dry-run of non-existing file' " + echo ignored-file >>.gitignore && + test_must_fail git add --dry-run track-this ignored-file >actual 2>&1 +" + +test_expect_success 'git add --dry-run of an existing file output' " + echo \"fatal: pathspec 'ignored-file' did not match any files\" >expect && + test_i18ncmp expect actual +" + +cat >expect.err <<\EOF +The following paths are ignored by one of your .gitignore files: +ignored-file +Use -f if you really want to add them. +EOF +cat >expect.out <<\EOF +add 'track-this' +EOF + +test_expect_success 'git add --dry-run --ignore-missing of non-existing file' ' + test_must_fail git add --dry-run --ignore-missing track-this ignored-file >actual.out 2>actual.err +' + +test_expect_success 'git add --dry-run --ignore-missing of non-existing file output' ' + test_i18ncmp expect.out actual.out && + test_i18ncmp expect.err actual.err +' + +test_expect_success 'git add empty string should fail' ' + test_must_fail git add "" +' + +test_expect_success 'git add --chmod=[+-]x stages correctly' ' + rm -f foo1 && + echo foo >foo1 && + git add --chmod=+x foo1 && + test_mode_in_index 100755 foo1 && + git add --chmod=-x foo1 && + test_mode_in_index 100644 foo1 +' + +test_expect_success POSIXPERM,SYMLINKS 'git add --chmod=+x with symlinks' ' + git config core.filemode 1 && + git config core.symlinks 1 && + rm -f foo2 && + echo foo >foo2 && + git add --chmod=+x foo2 && + test_mode_in_index 100755 foo2 +' + +test_expect_success 'git add --chmod=[+-]x changes index with already added file' ' + rm -f foo3 xfoo3 && + git reset --hard && + echo foo >foo3 && + git add foo3 && + git add --chmod=+x foo3 && + test_mode_in_index 100755 foo3 && + echo foo >xfoo3 && + chmod 755 xfoo3 && + git add xfoo3 && + git add --chmod=-x xfoo3 && + test_mode_in_index 100644 xfoo3 +' + +test_expect_success POSIXPERM 'git add --chmod=[+-]x does not change the working tree' ' + echo foo >foo4 && + git add foo4 && + git add --chmod=+x foo4 && + ! test -x foo4 +' + +test_expect_success 'no file status change if no pathspec is given' ' + >foo5 && + >foo6 && + git add foo5 foo6 && + git add --chmod=+x && + test_mode_in_index 100644 foo5 && + test_mode_in_index 100644 foo6 +' + +test_expect_success 'no file status change if no pathspec is given in subdir' ' + mkdir -p sub && + ( + cd sub && + >sub-foo1 && + >sub-foo2 && + git add . && + git add --chmod=+x && + test_mode_in_index 100644 sub-foo1 && + test_mode_in_index 100644 sub-foo2 + ) +' + +test_expect_success 'all statuses changed in folder if . is given' ' + rm -fr empty && + git add --chmod=+x . && + test $(git ls-files --stage | grep ^100644 | wc -l) -eq 0 && + git add --chmod=-x . && + test $(git ls-files --stage | grep ^100755 | wc -l) -eq 0 +' + +test_expect_success CASE_INSENSITIVE_FS 'path is case-insensitive' ' + path="$(pwd)/BLUB" && + touch "$path" && + downcased="$(echo "$path" | tr A-Z a-z)" && + git add "$downcased" +' + +test_done |