diff options
Diffstat (limited to 't/t2020-checkout-detach.sh')
| -rwxr-xr-x | t/t2020-checkout-detach.sh | 332 |
1 files changed, 332 insertions, 0 deletions
diff --git a/t/t2020-checkout-detach.sh b/t/t2020-checkout-detach.sh new file mode 100755 index 000000000000..b748db9946ef --- /dev/null +++ b/t/t2020-checkout-detach.sh @@ -0,0 +1,332 @@ +#!/bin/sh + +test_description='checkout into detached HEAD state' +. ./test-lib.sh + +check_detached () { + test_must_fail git symbolic-ref -q HEAD >/dev/null +} + +check_not_detached () { + git symbolic-ref -q HEAD >/dev/null +} + +PREV_HEAD_DESC='Previous HEAD position was' +check_orphan_warning() { + test_i18ngrep "you are leaving $2 behind" "$1" && + test_i18ngrep ! "$PREV_HEAD_DESC" "$1" +} +check_no_orphan_warning() { + test_i18ngrep ! "you are leaving .* commit.*behind" "$1" && + test_i18ngrep "$PREV_HEAD_DESC" "$1" +} + +reset () { + git checkout master && + check_not_detached +} + +test_expect_success 'setup' ' + test_commit one && + test_commit two && + test_commit three && git tag -d three && + test_commit four && git tag -d four && + git branch branch && + git tag tag +' + +test_expect_success 'checkout branch does not detach' ' + reset && + git checkout branch && + check_not_detached +' + +test_expect_success 'checkout tag detaches' ' + reset && + git checkout tag && + check_detached +' + +test_expect_success 'checkout branch by full name detaches' ' + reset && + git checkout refs/heads/branch && + check_detached +' + +test_expect_success 'checkout non-ref detaches' ' + reset && + git checkout branch^ && + check_detached +' + +test_expect_success 'checkout ref^0 detaches' ' + reset && + git checkout branch^0 && + check_detached +' + +test_expect_success 'checkout --detach detaches' ' + reset && + git checkout --detach branch && + check_detached +' + +test_expect_success 'checkout --detach without branch name' ' + reset && + git checkout --detach && + check_detached +' + +test_expect_success 'checkout --detach errors out for non-commit' ' + reset && + test_must_fail git checkout --detach one^{tree} && + check_not_detached +' + +test_expect_success 'checkout --detach errors out for extra argument' ' + reset && + git checkout master && + test_must_fail git checkout --detach tag one.t && + check_not_detached +' + +test_expect_success 'checkout --detached and -b are incompatible' ' + reset && + test_must_fail git checkout --detach -b newbranch tag && + check_not_detached +' + +test_expect_success 'checkout --detach moves HEAD' ' + reset && + git checkout one && + git checkout --detach two && + git diff --exit-code HEAD && + git diff --exit-code two +' + +test_expect_success 'checkout warns on orphan commits' ' + reset && + git checkout --detach two && + echo content >orphan && + git add orphan && + git commit -a -m orphan1 && + echo new content >orphan && + git commit -a -m orphan2 && + orphan2=$(git rev-parse HEAD) && + git checkout master 2>stderr +' + +test_expect_success 'checkout warns on orphan commits: output' ' + check_orphan_warning stderr "2 commits" +' + +test_expect_success 'checkout warns orphaning 1 of 2 commits' ' + git checkout "$orphan2" && + git checkout HEAD^ 2>stderr +' + +test_expect_success 'checkout warns orphaning 1 of 2 commits: output' ' + check_orphan_warning stderr "1 commit" +' + +test_expect_success 'checkout does not warn leaving ref tip' ' + reset && + git checkout --detach two && + git checkout master 2>stderr +' + +test_expect_success 'checkout does not warn leaving ref tip' ' + check_no_orphan_warning stderr +' + +test_expect_success 'checkout does not warn leaving reachable commit' ' + reset && + git checkout --detach HEAD^ && + git checkout master 2>stderr +' + +test_expect_success 'checkout does not warn leaving reachable commit' ' + check_no_orphan_warning stderr +' + +cat >expect <<'EOF' +Your branch is behind 'master' by 1 commit, and can be fast-forwarded. + (use "git pull" to update your local branch) +EOF +test_expect_success 'tracking count is accurate after orphan check' ' + reset && + git branch child master^ && + git config branch.child.remote . && + git config branch.child.merge refs/heads/master && + git checkout child^ && + git checkout child >stdout && + test_i18ncmp expect stdout +' + +test_expect_success 'no advice given for explicit detached head state' ' + # baseline + test_config advice.detachedHead true && + git checkout child && git checkout HEAD^0 >expect.advice 2>&1 && + test_config advice.detachedHead false && + git checkout child && git checkout HEAD^0 >expect.no-advice 2>&1 && + test_unconfig advice.detachedHead && + # without configuration, the advice.* variables default to true + git checkout child && git checkout HEAD^0 >actual 2>&1 && + test_cmp expect.advice actual && + + # with explicit --detach + # no configuration + test_unconfig advice.detachedHead && + git checkout child && git checkout --detach HEAD^0 >actual 2>&1 && + test_cmp expect.no-advice actual && + + # explicitly decline advice + test_config advice.detachedHead false && + git checkout child && git checkout --detach HEAD^0 >actual 2>&1 && + test_cmp expect.no-advice actual +' + +# Detached HEAD tests for GIT_PRINT_SHA1_ELLIPSIS (new format) +test_expect_success 'describe_detached_head prints no SHA-1 ellipsis when not asked to' " + + commit=$(git rev-parse --short=12 master^) && + commit2=$(git rev-parse --short=12 master~2) && + commit3=$(git rev-parse --short=12 master~3) && + + # The first detach operation is more chatty than the following ones. + cat >1st_detach <<-EOF && + Note: switching to 'HEAD^'. + + You are in 'detached HEAD' state. You can look around, make experimental + changes and commit them, and you can discard any commits you make in this + state without impacting any branches by switching back to a branch. + + If you want to create a new branch to retain commits you create, you may + do so (now or later) by using -c with the switch command. Example: + + git switch -c <new-branch-name> + + Or undo this operation with: + + git switch - + + Turn off this advice by setting config variable advice.detachedHead to false + + HEAD is now at \$commit three + EOF + + # The remaining ones just show info about previous and current HEADs. + cat >2nd_detach <<-EOF && + Previous HEAD position was \$commit three + HEAD is now at \$commit2 two + EOF + + cat >3rd_detach <<-EOF && + Previous HEAD position was \$commit2 two + HEAD is now at \$commit3 one + EOF + + reset && + check_not_detached && + + # Various ways of *not* asking for ellipses + + sane_unset GIT_PRINT_SHA1_ELLIPSIS && + git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 1st_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS="no" git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 2nd_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS= git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 3rd_detach actual && + + sane_unset GIT_PRINT_SHA1_ELLIPSIS && + + # We only have four commits, but we can re-use them + reset && + check_not_detached && + + # Make no mention of the env var at all + git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 1st_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS='nope' && + git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 2nd_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS=nein && + git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 3rd_detach actual && + + true +" + +# Detached HEAD tests for GIT_PRINT_SHA1_ELLIPSIS (old format) +test_expect_success 'describe_detached_head does print SHA-1 ellipsis when asked to' " + + commit=$(git rev-parse --short=12 master^) && + commit2=$(git rev-parse --short=12 master~2) && + commit3=$(git rev-parse --short=12 master~3) && + + # The first detach operation is more chatty than the following ones. + cat >1st_detach <<-EOF && + Note: switching to 'HEAD^'. + + You are in 'detached HEAD' state. You can look around, make experimental + changes and commit them, and you can discard any commits you make in this + state without impacting any branches by switching back to a branch. + + If you want to create a new branch to retain commits you create, you may + do so (now or later) by using -c with the switch command. Example: + + git switch -c <new-branch-name> + + Or undo this operation with: + + git switch - + + Turn off this advice by setting config variable advice.detachedHead to false + + HEAD is now at \$commit... three + EOF + + # The remaining ones just show info about previous and current HEADs. + cat >2nd_detach <<-EOF && + Previous HEAD position was \$commit... three + HEAD is now at \$commit2... two + EOF + + cat >3rd_detach <<-EOF && + Previous HEAD position was \$commit2... two + HEAD is now at \$commit3... one + EOF + + reset && + check_not_detached && + + # Various ways of asking for ellipses... + # The user can just use any kind of quoting (including none). + + GIT_PRINT_SHA1_ELLIPSIS=yes git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 1st_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS=Yes git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 2nd_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS=YES git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 3rd_detach actual && + + true +" + +test_done |