diff options
Diffstat (limited to 'src/libstore/build.cc')
| -rw-r--r-- | src/libstore/build.cc | 216 |
1 files changed, 71 insertions, 145 deletions
diff --git a/src/libstore/build.cc b/src/libstore/build.cc index 4c6b8c5e59ce..6a62345f745d 100644 --- a/src/libstore/build.cc +++ b/src/libstore/build.cc @@ -108,7 +108,6 @@ protected: { nrFailed = 0; exitCode = ecBusy; - forceInputs = false; } virtual ~Goal() @@ -116,8 +115,6 @@ protected: trace("goal destroyed"); } - bool forceInputs; - public: virtual void work() = 0; @@ -152,11 +149,6 @@ public: (important!), etc. */ virtual void cancel() = 0; - void setForceInputs(bool x) - { - forceInputs = x; - } - protected: void amDone(ExitCode result); }; @@ -264,7 +256,7 @@ public: MakeError(SubstError, Error) -MakeError(BuildError, Error) +MakeError(BuildError, Error) /* denoted a permanent build failure */ ////////////////////////////////////////////////////////////////////// @@ -496,7 +488,7 @@ void UserLock::acquire() } } - throw BuildError(format("all build users are currently in use; " + throw Error(format("all build users are currently in use; " "consider creating additional users and adding them to the `%1%' group") % buildUsersGroup); } @@ -689,7 +681,7 @@ private: void buildDone(); /* Is the build hook willing to perform the build? */ - typedef enum {rpAccept, rpDecline, rpPostpone, rpDone, rpRestart} HookReply; + typedef enum {rpAccept, rpDecline, rpPostpone} HookReply; HookReply tryBuildHook(); /* Synchronously wait for a build hook to finish. */ @@ -838,10 +830,8 @@ void DerivationGoal::haveDerivation() /* If they are all valid, then we're done. */ if (invalidOutputs.size() == 0) { - if(!forceInputs) { - amDone(ecSuccess); - return; - } + amDone(ecSuccess); + return; } /* If this is a fixed-output derivation, it is possible that some @@ -883,55 +873,21 @@ void DerivationGoal::outputsSubstituted() nrFailed = 0; if (checkPathValidity(false).size() == 0) { - if (! forceInputs){ - amDone(ecSuccess); - return; - } + amDone(ecSuccess); + return; } /* Otherwise, at least one of the output paths could not be produced using a substitute. So we have to build instead. */ /* The inputs must be built before we can build this goal. */ - /* !!! but if possible, only install the paths that we need */ - for (DerivationInputs::iterator i = drv.inputDrvs.begin(); - i != drv.inputDrvs.end(); ++i){ - GoalPtr newGoal = worker.makeDerivationGoal(i->first); - newGoal->setForceInputs(forceInputs); - addWaitee(newGoal); - } + foreach (DerivationInputs::iterator, i, drv.inputDrvs) + addWaitee(worker.makeDerivationGoal(i->first)); for (PathSet::iterator i = drv.inputSrcs.begin(); i != drv.inputSrcs.end(); ++i) addWaitee(worker.makeSubstitutionGoal(*i)); - /* Actually, I do some work twice just to be on the safe side */ - string s = drv.env["exportBuildReferencesGraph"]; - Strings ss = tokenizeString(s); - if (ss.size() % 2 !=0) - throw BuildError(format("odd number of tokens in `exportBuildReferencesGraph': `%1%'") % s); - for (Strings::iterator i = ss.begin(); i != ss.end(); ) { - string fileName = *i++; - Path storePath=*i++; - - if (!isInStore(storePath)) - throw BuildError(format("`exportBuildReferencesGraph' contains a non-store path `%1%'") - % storePath); - storePath = toStorePath(storePath); - if (!worker.store.isValidPath(storePath)) - throw BuildError(format("`exportBuildReferencesGraph' contains an invalid path `%1%'") - % storePath); - - /* Build-time closure should be in dependencies - * We really want just derivation, its closure - * and outputs. Looks like we should build it. - * */ - - GoalPtr newGoal = worker.makeDerivationGoal(storePath); - newGoal->setForceInputs(true); - addWaitee(newGoal); - } - state = &DerivationGoal::inputsRealised; } @@ -943,18 +899,49 @@ void DerivationGoal::inputsRealised() if (nrFailed != 0) { printMsg(lvlError, format("cannot build derivation `%1%': " - "%2% inputs could not be realised") + "%2% dependencies couldn't be built") % drvPath % nrFailed); amDone(ecFailed); return; } - /* Maybe we just wanted to force build of inputs */ - if (checkPathValidity(false).size() == 0) { - amDone(ecSuccess); - return; + /* Gather information necessary for computing the closure and/or + running the build hook. */ + + /* The outputs are referenceable paths. */ + foreach (DerivationOutputs::iterator, i, drv.outputs) { + debug(format("building path `%1%'") % i->second.path); + allPaths.insert(i->second.path); } + /* Determine the full set of input paths. */ + + /* First, the input derivations. */ + foreach (DerivationInputs::iterator, i, drv.inputDrvs) { + /* Add the relevant output closures of the input derivation + `*i' as input paths. Only add the closures of output paths + that are specified as inputs. */ + assert(worker.store.isValidPath(i->first)); + Derivation inDrv = derivationFromPath(i->first); + foreach (StringSet::iterator, j, i->second) + if (inDrv.outputs.find(*j) != inDrv.outputs.end()) + computeFSClosure(inDrv.outputs[*j].path, inputPaths); + else + throw Error( + format("derivation `%1%' requires non-existent output `%2%' from input derivation `%3%'") + % drvPath % *j % i->first); + } + + /* Second, the input sources. */ + foreach (PathSet::iterator, i, drv.inputSrcs) + computeFSClosure(*i, inputPaths); + /* !!! if `*i' is a derivation, then add the closure of every + output in the dependency graph to `inputPaths'. */ + + debug(format("added input paths %1%") % showPaths(inputPaths)); + + allPaths.insert(inputPaths.begin(), inputPaths.end()); + /* Okay, try to build. Note that here we don't wait for a build slot to become available, since we don't need one if there is a build hook. */ @@ -967,6 +954,20 @@ void DerivationGoal::tryToBuild() { trace("trying to build"); + /* Acquire locks on the output paths. After acquiring the locks, + it might turn out that somebody else has performed the build + already, and we're done. If not, we can proceed. */ + switch (prepareBuild()) { + case prDone: + amDone(ecSuccess); + return; + case prRestart: + worker.waitForAnyGoal(shared_from_this()); + return; + case prProceed: + break; + } + try { /* Is the build hook willing to accept this job? */ @@ -980,38 +981,19 @@ void DerivationGoal::tryToBuild() case rpPostpone: /* Not now; wait until at least one child finishes. */ worker.waitForChildTermination(shared_from_this()); + outputLocks.unlock(); return; case rpDecline: /* We should do it ourselves. */ break; - case rpDone: - /* Somebody else did it. */ - amDone(ecSuccess); - return; - case rpRestart: - /* Somebody else is building this output path. - Restart from haveDerivation(). */ - state = &DerivationGoal::haveDerivation; - worker.waitForAnyGoal(shared_from_this()); - return; } + usingBuildHook = false; + /* Make sure that we are allowed to start a build. */ if (!worker.canBuildMore()) { worker.waitForBuildSlot(shared_from_this()); - return; - } - - /* Acquire locks and such. If we then see that the build has - been done by somebody else, we're done. */ - usingBuildHook = false; - PrepareBuildReply preply = prepareBuild(); - if (preply == prDone) { - amDone(ecSuccess); - return; - } else if (preply == prRestart) { - state = &DerivationGoal::haveDerivation; - worker.waitForAnyGoal(shared_from_this()); + outputLocks.unlock(); return; } @@ -1022,14 +1004,13 @@ void DerivationGoal::tryToBuild() printMsg(lvlError, e.msg()); outputLocks.unlock(); buildUser.release(); - if (printBuildTrace) { + if (printBuildTrace) if (usingBuildHook) printMsg(lvlError, format("@ hook-failed %1% %2% %3% %4%") % drvPath % drv.outputs["out"].path % 0 % e.msg()); else printMsg(lvlError, format("@ build-failed %1% %2% %3% %4%") % drvPath % drv.outputs["out"].path % 0 % e.msg()); - } amDone(ecFailed); return; } @@ -1069,8 +1050,7 @@ void DerivationGoal::buildDone() malicious user from leaving behind a process that keeps files open and modifies them after they have been chown'ed to root. */ - if (buildUser.enabled()) - buildUser.kill(); + if (buildUser.enabled()) buildUser.kill(); try { @@ -1140,7 +1120,7 @@ void DerivationGoal::buildDone() % drvPath % drv.outputs["out"].path % status % e.msg()); else printMsg(lvlError, format("@ build-failed %1% %2% %3% %4%") - % drvPath % drv.outputs["out"].path % status % e.msg()); + % drvPath % drv.outputs["out"].path % 1 % e.msg()); } amDone(ecFailed); return; @@ -1296,16 +1276,6 @@ DerivationGoal::HookReply DerivationGoal::tryBuildHook() else if (reply == "accept") { - /* Acquire locks and such. If we then see that the output - paths are now valid, we're done. */ - PrepareBuildReply preply = prepareBuild(); - if (preply == prDone || preply == prRestart) { - /* Tell the hook to exit. */ - writeLine(toHook.writeSide, "cancel"); - terminateBuildHook(); - return preply == prDone ? rpDone : rpRestart; - } - printMsg(lvlInfo, format("running hook to build path(s) %1%") % showPaths(outputPaths(drv.outputs))); @@ -1390,8 +1360,7 @@ DerivationGoal::PrepareBuildReply DerivationGoal::prepareBuild() has locked the output since we checked in haveDerivation(). (It can't happen between here and the lockPaths() call below because we're not allowing multi-threading.) */ - for (DerivationOutputs::iterator i = drv.outputs.begin(); - i != drv.outputs.end(); ++i) + foreach (DerivationOutputs::iterator, i, drv.outputs) if (pathIsLockedByMe(i->second.path)) { debug(format("restarting derivation `%1%' because `%2%' is locked by another goal") % drvPath % i->second.path); @@ -1425,66 +1394,23 @@ DerivationGoal::PrepareBuildReply DerivationGoal::prepareBuild() if (validPaths.size() > 0) { /* !!! fix this; try to delete valid paths */ - throw BuildError( + throw Error( format("derivation `%1%' is blocked by its output paths") % drvPath); } /* If any of the outputs already exist but are not registered, delete them. */ - for (DerivationOutputs::iterator i = drv.outputs.begin(); - i != drv.outputs.end(); ++i) - { + foreach (DerivationOutputs::iterator, i, drv.outputs) { Path path = i->second.path; if (worker.store.isValidPath(path)) - throw BuildError(format("obstructed build: path `%1%' exists") % path); + throw Error(format("obstructed build: path `%1%' exists") % path); if (pathExists(path)) { debug(format("removing unregistered path `%1%'") % path); deletePathWrapped(path); } } - /* Gather information necessary for computing the closure and/or - running the build hook. */ - - /* The outputs are referenceable paths. */ - for (DerivationOutputs::iterator i = drv.outputs.begin(); - i != drv.outputs.end(); ++i) - { - debug(format("building path `%1%'") % i->second.path); - allPaths.insert(i->second.path); - } - - /* Determine the full set of input paths. */ - - /* First, the input derivations. */ - for (DerivationInputs::iterator i = drv.inputDrvs.begin(); - i != drv.inputDrvs.end(); ++i) - { - /* Add the relevant output closures of the input derivation - `*i' as input paths. Only add the closures of output paths - that are specified as inputs. */ - assert(worker.store.isValidPath(i->first)); - Derivation inDrv = derivationFromPath(i->first); - for (StringSet::iterator j = i->second.begin(); - j != i->second.end(); ++j) - if (inDrv.outputs.find(*j) != inDrv.outputs.end()) - computeFSClosure(inDrv.outputs[*j].path, inputPaths); - else - throw BuildError( - format("derivation `%1%' requires non-existent output `%2%' from input derivation `%3%'") - % drvPath % *j % i->first); - } - - /* Second, the input sources. */ - for (PathSet::iterator i = drv.inputSrcs.begin(); - i != drv.inputSrcs.end(); ++i) - computeFSClosure(*i, inputPaths); - - debug(format("added input paths %1%") % showPaths(inputPaths)); - - allPaths.insert(inputPaths.begin(), inputPaths.end()); - return prProceed; } @@ -1508,7 +1434,7 @@ void DerivationGoal::startBuilder() && !(drv.platform == "i686-linux" && thisSystem == "x86_64-linux") #endif ) - throw BuildError( + throw Error( format("a `%1%' is required to build `%3%', but I am a `%2%'") % drv.platform % thisSystem % drvPath); |