diff options
Diffstat (limited to 'scripts')
| -rwxr-xr-x | scripts/build-remote.pl.in | 275 | ||||
| -rw-r--r-- | scripts/local.mk | 2 |
2 files changed, 0 insertions, 277 deletions
diff --git a/scripts/build-remote.pl.in b/scripts/build-remote.pl.in deleted file mode 100755 index b5fc629eb499..000000000000 --- a/scripts/build-remote.pl.in +++ /dev/null @@ -1,275 +0,0 @@ -#! @perl@ -w @perlFlags@ - -use utf8; -use Fcntl qw(:DEFAULT :flock); -use English '-no_match_vars'; -use IO::Handle; -use Nix::Config; -use Nix::SSH; -use Nix::CopyClosure; -use Nix::Store; -use Encode; -no warnings('once'); - -STDERR->autoflush(1); -binmode STDERR, ":encoding(utf8)"; - -my $debug = defined $ENV{NIX_DEBUG_HOOK}; - - -# General operation: -# -# Try to find a free machine of type $neededSystem. We do this as -# follows: -# - We acquire an exclusive lock on $currentLoad/main-lock. -# - For each machine $machine of type $neededSystem and for each $slot -# less than the maximum load for that machine, we try to get an -# exclusive lock on $currentLoad/$machine-$slot (without blocking). -# If we get such a lock, we send "accept" to the caller. Otherwise, -# we send "postpone" and exit. -# - We release the exclusive lock on $currentLoad/main-lock. -# - We perform the build on $neededSystem. -# - We release the exclusive lock on $currentLoad/$machine-$slot. -# -# The nice thing about this scheme is that if we die prematurely, the -# locks are released automatically. - - -# Make sure that we don't get any SSH passphrase or host key popups - -# if there is any problem it should fail, not do something -# interactive. -$ENV{"DISPLAY"} = ""; -$ENV{"SSH_ASKPASS"} = ""; - - -sub sendReply { - my $reply = shift; - print STDERR "# $reply\n"; -} - -sub all { $_ || return 0 for @_; 1 } - - -# Initialisation. -my $loadIncreased = 0; - -my ($localSystem, $maxSilentTime, $buildTimeout) = @ARGV; - -my $currentLoad = $ENV{"NIX_CURRENT_LOAD"} // "/run/nix/current-load"; -my $conf = $ENV{"NIX_REMOTE_SYSTEMS"} // "@sysconfdir@/nix/machines"; - - -sub openSlotLock { - my ($machine, $slot) = @_; - my $slotLockFn = "$currentLoad/" . (join '+', @{$machine->{systemTypes}}) . "-" . $machine->{hostName} . "-$slot"; - my $slotLock = new IO::Handle; - sysopen $slotLock, "$slotLockFn", O_RDWR|O_CREAT, 0600 or die; - return $slotLock; -} - - -# Read the list of machines. -my @machines; -if (defined $conf && -e $conf) { - open CONF, "<$conf" or die; - while (<CONF>) { - chomp; - s/\#.*$//g; - next if /^\s*$/; - my @tokens = split /\s/, $_; - my @supportedFeatures = split(/,/, $tokens[5] || ""); - my @mandatoryFeatures = split(/,/, $tokens[6] || ""); - push @machines, - { hostName => $tokens[0] - , systemTypes => [ split(/,/, $tokens[1]) ] - , sshKey => $tokens[2] - , maxJobs => int($tokens[3]) - , speedFactor => 1.0 * (defined $tokens[4] ? int($tokens[4]) : 1) - , supportedFeatures => [ @supportedFeatures, @mandatoryFeatures ] - , mandatoryFeatures => [ @mandatoryFeatures ] - , enabled => 1 - }; - } - close CONF; -} - - - -# Wait for the calling process to ask us whether we can build some derivation. -my ($drvPath, $hostName, $slotLock); -my ($from, $to); - -REQ: while (1) { - $_ = <STDIN> || exit 0; - (my $amWilling, my $neededSystem, $drvPath, my $requiredFeatures) = split; - my @requiredFeatures = split /,/, $requiredFeatures; - - my $canBuildLocally = $amWilling && ($localSystem eq $neededSystem); - - if (!defined $currentLoad) { - sendReply "decline"; - next; - } - - # Acquire the exclusive lock on $currentLoad/main-lock. - mkdir $currentLoad, 0777 or die unless -d $currentLoad; - my $mainLock = "$currentLoad/main-lock"; - sysopen MAINLOCK, "$mainLock", O_RDWR|O_CREAT, 0600 or die; - flock(MAINLOCK, LOCK_EX) or die; - - - while (1) { - # Find all machine that can execute this build, i.e., that - # support builds for the given platform and features, and are - # not at their job limit. - my $rightType = 0; - my @available = (); - LOOP: foreach my $cur (@machines) { - if ($cur->{enabled} - && (grep { $neededSystem eq $_ } @{$cur->{systemTypes}}) - && all(map { my $f = $_; 0 != grep { $f eq $_ } @{$cur->{supportedFeatures}} } (@requiredFeatures, @mandatoryFeatures)) - && all(map { my $f = $_; 0 != grep { $f eq $_ } @requiredFeatures } @{$cur->{mandatoryFeatures}}) - ) - { - $rightType = 1; - - # We have a machine of the right type. Determine the load on - # the machine. - my $slot = 0; - my $load = 0; - my $free; - while ($slot < $cur->{maxJobs}) { - my $slotLock = openSlotLock($cur, $slot); - if (flock($slotLock, LOCK_EX | LOCK_NB)) { - $free = $slot unless defined $free; - flock($slotLock, LOCK_UN) or die; - } else { - $load++; - } - close $slotLock; - $slot++; - } - - push @available, { machine => $cur, load => $load, free => $free } - if $load < $cur->{maxJobs}; - } - } - - if ($debug) { - print STDERR "load on " . $_->{machine}->{hostName} . " = " . $_->{load} . "\n" - foreach @available; - } - - - # Didn't find any available machine? Then decline or postpone. - if (scalar @available == 0) { - # Postpone if we have a machine of the right type, except - # if the local system can and wants to do the build. - if ($rightType && !$canBuildLocally) { - sendReply "postpone"; - } else { - sendReply "decline"; - } - close MAINLOCK; - next REQ; - } - - - # Prioritise the available machines as follows: - # - First by load divided by speed factor, rounded to the nearest - # integer. This causes fast machines to be preferred over slow - # machines with similar loads. - # - Then by speed factor. - # - Finally by load. - sub lf { my $x = shift; return int($x->{load} / $x->{machine}->{speedFactor} + 0.4999); } - @available = sort - { lf($a) <=> lf($b) - || $b->{machine}->{speedFactor} <=> $a->{machine}->{speedFactor} - || $a->{load} <=> $b->{load} - } @available; - - - # Select the best available machine and lock a free slot. - my $selected = $available[0]; - my $machine = $selected->{machine}; - - $slotLock = openSlotLock($machine, $selected->{free}); - flock($slotLock, LOCK_EX | LOCK_NB) or die; - utime undef, undef, $slotLock; - - close MAINLOCK; - - - # Connect to the selected machine. - my @sshOpts = ("-i", $machine->{sshKey}); - $hostName = $machine->{hostName}; - eval { - ($from, $to) = connectToRemoteNix($hostName, \@sshOpts, "2>&4"); - # FIXME: check if builds are inhibited. - }; - last REQ unless $@; - print STDERR "$@"; - warn "unable to open SSH connection to ‘$hostName’, trying other available machines...\n"; - $from = undef; - $to = undef; - $machine->{enabled} = 0; - } -} - - -# Tell Nix we've accepted the build. -sendReply "accept"; -my @inputs = split /\s/, readline(STDIN); -my @outputs = split /\s/, readline(STDIN); - - -# Copy the derivation and its dependencies to the build machine. This -# is guarded by an exclusive lock per machine to prevent multiple -# build-remote instances from copying to a machine simultaneously. -# That's undesirable because we may end up with N instances uploading -# the same missing path simultaneously, causing the effective network -# bandwidth and target disk speed to be divided by N. -my $uploadLock = "$currentLoad/$hostName.upload-lock"; -sysopen UPLOADLOCK, "$uploadLock", O_RDWR|O_CREAT, 0600 or die; -eval { - local $SIG{ALRM} = sub { die "alarm\n" }; - # Don't wait forever, so that a process that gets stuck while - # holding the lock doesn't block everybody else indefinitely. - # It's safe to continue after a timeout, just (potentially) - # inefficient. - alarm 15 * 60; - flock(UPLOADLOCK, LOCK_EX); - alarm 0; -}; -if ($@) { - die unless $@ eq "alarm\n"; - print STDERR "somebody is hogging $uploadLock, continuing...\n"; - unlink $uploadLock; -} -Nix::CopyClosure::copyToOpen($from, $to, $hostName, [ $drvPath, @inputs ], 0, 0); -close UPLOADLOCK; - - -# Perform the build. -print STDERR "building ‘$drvPath’ on ‘$hostName’\n"; -writeInt(6, $to) or die; # == cmdBuildPaths -writeStrings([$drvPath], $to); -writeInt($maxSilentTime, $to); -writeInt($buildTimeout, $to); -my $res = readInt($from); -if ($res != 0) { - my $msg = decode("utf-8", readString($from)); - print STDERR "error: $msg on ‘$hostName’\n"; - exit $res; -} - - -# Copy the output from the build machine. -my @outputs2 = grep { !isValidPath($_) } @outputs; -if (scalar @outputs2 > 0) { - writeInt(5, $to); # == cmdExportPaths - writeInt(0, $to); # don't sign - writeStrings(\@outputs2, $to); - $ENV{'NIX_HELD_LOCKS'} = "@outputs2"; # FIXME: ugly - importPaths(fileno($from), 1); -} diff --git a/scripts/local.mk b/scripts/local.mk index ee8ae6845dc1..365d72086bf5 100644 --- a/scripts/local.mk +++ b/scripts/local.mk @@ -4,7 +4,6 @@ nix_bin_scripts := \ bin-scripts += $(nix_bin_scripts) nix_noinst_scripts := \ - $(d)/build-remote.pl \ $(d)/nix-http-export.cgi \ $(d)/nix-profile.sh \ $(d)/nix-reduce-build @@ -14,6 +13,5 @@ noinst-scripts += $(nix_noinst_scripts) profiledir = $(sysconfdir)/profile.d $(eval $(call install-file-as, $(d)/nix-profile.sh, $(profiledir)/nix.sh, 0644)) -$(eval $(call install-program-in, $(d)/build-remote.pl, $(libexecdir)/nix)) clean-files += $(nix_bin_scripts) $(nix_noinst_scripts) |