diff options
Diffstat (limited to 'infra')
36 files changed, 0 insertions, 1698 deletions
diff --git a/infra/dns/import b/infra/dns/import deleted file mode 100755 index e79e426b5553..000000000000 --- a/infra/dns/import +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh -set -ue - -# Imports a zone file into a Google Cloud DNS zone of the same name -readonly ZONE="${1}" - -gcloud dns record-sets import "${ZONE}" \ - --project composite-watch-759 \ - --zone-file-format \ - --delete-all-existing \ - --zone "${ZONE}" diff --git a/infra/dns/kontemplate-works b/infra/dns/kontemplate-works deleted file mode 100644 index 326a129d2105..000000000000 --- a/infra/dns/kontemplate-works +++ /dev/null @@ -1,15 +0,0 @@ -;; -*- mode: zone; -*- -;; Do not delete these -kontemplate.works. 21600 IN NS ns-cloud-d1.googledomains.com. -kontemplate.works. 21600 IN NS ns-cloud-d2.googledomains.com. -kontemplate.works. 21600 IN NS ns-cloud-d3.googledomains.com. -kontemplate.works. 21600 IN NS ns-cloud-d4.googledomains.com. -kontemplate.works. 21600 IN SOA ns-cloud-d1.googledomains.com. cloud-dns-hostmaster.google.com. 4 21600 3600 259200 300 - -;; Github site setup -kontemplate.works. 60 IN A 185.199.108.153 -kontemplate.works. 60 IN A 185.199.109.153 -kontemplate.works. 60 IN A 185.199.110.153 -kontemplate.works. 60 IN A 185.199.111.153 - -www.kontemplate.works. 60 IN CNAME tazjin.github.io. diff --git a/infra/dns/oslo-pub b/infra/dns/oslo-pub deleted file mode 100644 index 674687484b90..000000000000 --- a/infra/dns/oslo-pub +++ /dev/null @@ -1,8 +0,0 @@ -;; Do not delete these -oslo.pub. 21600 IN NS ns-cloud-c1.googledomains.com. -oslo.pub. 21600 IN NS ns-cloud-c2.googledomains.com. -oslo.pub. 21600 IN NS ns-cloud-c3.googledomains.com. -oslo.pub. 21600 IN NS ns-cloud-c4.googledomains.com. -oslo.pub. 21600 IN SOA ns-cloud-c1.googledomains.com. cloud-dns-hostmaster.google.com. 4 21600 3600 1209600 300 - -oslo.pub. 60 IN A 46.21.106.241 diff --git a/infra/dns/root-tazj-in b/infra/dns/root-tazj-in deleted file mode 100644 index 43db5834a0ca..000000000000 --- a/infra/dns/root-tazj-in +++ /dev/null @@ -1,33 +0,0 @@ -;; -*- mode: zone; -*- -;; Do not delete these -tazj.in. 21600 IN NS ns-cloud-a1.googledomains.com. -tazj.in. 21600 IN NS ns-cloud-a2.googledomains.com. -tazj.in. 21600 IN NS ns-cloud-a3.googledomains.com. -tazj.in. 21600 IN NS ns-cloud-a4.googledomains.com. -tazj.in. 21600 IN SOA ns-cloud-a1.googledomains.com. cloud-dns-hostmaster.google.com. 123 21600 3600 1209600 300 - -;; Email setup -tazj.in. 300 IN MX 1 aspmx.l.google.com. -tazj.in. 300 IN MX 5 alt1.aspmx.l.google.com. -tazj.in. 300 IN MX 5 alt2.aspmx.l.google.com. -tazj.in. 300 IN MX 10 alt3.aspmx.l.google.com. -tazj.in. 300 IN MX 10 alt4.aspmx.l.google.com. -tazj.in. 300 IN TXT "v=spf1 include:_spf.google.com ~all" -google._domainkey.tazj.in. 21600 IN TXT "v=DKIM1; k=rsa; p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA9AphX/WJf8zVXQB5Jk0Ry1MI6ARa6vEyAoJtpjpt9Nbm7XU4qVWFRJm+L0VFd5EZ5YDPJTIZ90lJE3/B8vae2ipnoGbJbj8LaVSzzIPMbWmhPhX3fkLJFdkv7xRDMDn730iYXRlfkgv6GsqbS8vZt7mzxx4mpnePTI323yjRVkwRW8nGVbsmB25ZoG1/0985" "kg4mSYxzWeJ2ozCPFhT4sfMtZMXe/4QEkJz/zkod29KZfFJmLgEaf73WLdBX8kdwbhuh2PYXt/PwzUrRzF5ujVCsSaTZwdRVPErcf+yo4NvedelTjjs8rFVfoJiaDD1q2bQ3w0gDEBWPdC2VP7k9zwIDAQAB" - -;; Site verifications -tazj.in. 3600 IN TXT "keybase-site-verification=gC4kzEmnLzY7F669PjN-pw2Cf__xHqcxQ08Gb-W9dhE" -tazj.in. 300 IN TXT "google-site-verification=d3_MI1OwD6q2OT42Vvh0I9w2u3Q5KFBu-PieNUE1Fig" -www.tazj.in. 3600 IN TXT "keybase-site-verification=ER8m_byyqAhzeIy9TyzkAU1H2p2yHtpvImuB_XrRF2U" - -;; Blog "storage engine" -blog.tazj.in. 21600 IN NS ns-cloud-c1.googledomains.com. -blog.tazj.in. 21600 IN NS ns-cloud-c2.googledomains.com. -blog.tazj.in. 21600 IN NS ns-cloud-c3.googledomains.com. -blog.tazj.in. 21600 IN NS ns-cloud-c4.googledomains.com. - -;; Webpage records setup -tazj.in. 300 IN A 34.98.120.189 -www.tazj.in. 300 IN A 34.98.120.189 -git.tazj.in. 300 IN A 34.98.120.189 -files.tazj.in. 300 IN CNAME c.storage.googleapis.com. diff --git a/infra/gcp/.gitignore b/infra/gcp/.gitignore deleted file mode 100644 index 96c7538dda8a..000000000000 --- a/infra/gcp/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -.terraform -*.tfstate -*.tfstate.backup diff --git a/infra/gcp/default.tf b/infra/gcp/default.tf deleted file mode 100644 index 2cb57836fa6d..000000000000 --- a/infra/gcp/default.tf +++ /dev/null @@ -1,111 +0,0 @@ -# Terraform configuration for the GCP project 'tazjins-infrastructure' - -provider "google" { - project = "tazjins-infrastructure" - region = "europe-north1" -} - -# Configure a storage bucket in which to keep Terraform state and -# other data, such as Nixery's layers. -resource "google_storage_bucket" "tazjins-data" { - name = "tazjins-data" - location = "EU" -} - -terraform { - backend "gcs" { - bucket = "tazjins-data" - prefix = "terraform" - } -} - -# Configure enabled APIs -resource "google_project_services" "primary" { - project = "tazjins-infrastructure" - services = [ - "bigquery-json.googleapis.com", - "bigquerystorage.googleapis.com", - "cloudapis.googleapis.com", - "clouddebugger.googleapis.com", - "cloudfunctions.googleapis.com", - "cloudkms.googleapis.com", - "cloudtrace.googleapis.com", - "compute.googleapis.com", - "container.googleapis.com", - "containerregistry.googleapis.com", - "datastore.googleapis.com", - "dns.googleapis.com", - "iam.googleapis.com", - "iamcredentials.googleapis.com", - "logging.googleapis.com", - "monitoring.googleapis.com", - "oslogin.googleapis.com", - "pubsub.googleapis.com", - "run.googleapis.com", - "servicemanagement.googleapis.com", - "serviceusage.googleapis.com", - "sourcerepo.googleapis.com", - "sql-component.googleapis.com", - "storage-api.googleapis.com", - "storage-component.googleapis.com", - ] -} - - -# Configure the main Kubernetes cluster in which services are deployed -resource "google_container_cluster" "primary" { - name = "tazjin-cluster" - location = "europe-north1" - - remove_default_node_pool = true - initial_node_count = 1 -} - -resource "google_container_node_pool" "primary_nodes" { - name = "primary-nodes" - location = "europe-north1" - cluster = google_container_cluster.primary.name - node_count = 1 - - node_config { - preemptible = true - machine_type = "n1-standard-2" - - oauth_scopes = [ - "storage-rw", - "logging-write", - "monitoring", - "https://www.googleapis.com/auth/source.read_only", - ] - } -} - -# Configure a service account for which GCS URL signing keys can be created. -resource "google_service_account" "nixery" { - account_id = "nixery" - display_name = "Nixery service account" -} - -# Configure Cloud KMS for secret encryption -resource "google_kms_key_ring" "tazjins_keys" { - name = "tazjins-keys" - location = "europe-north1" - - lifecycle { - prevent_destroy = true - } -} - -resource "google_kms_crypto_key" "kontemplate_key" { - name = "kontemplate-key" - key_ring = google_kms_key_ring.tazjins_keys.id - - lifecycle { - prevent_destroy = true - } -} - -# Configure the git repository that contains everything. -resource "google_sourcerepo_repository" "depot" { - name = "depot" -} diff --git a/infra/kubernetes/cgit/config.yaml b/infra/kubernetes/cgit/config.yaml deleted file mode 100644 index 78de82ee09ee..000000000000 --- a/infra/kubernetes/cgit/config.yaml +++ /dev/null @@ -1,73 +0,0 @@ ---- -apiVersion: v1 -kind: Secret -metadata: - name: gcsr-secrets -type: Opaque -data: - username: "Z2l0LXRhemppbi5nbWFpbC5jb20=" - # This credential is a GCSR 'gitcookie' token. - password: '{{ passLookup "gcsr-tazjin-password" | b64enc }}' ---- -apiVersion: apps/v1 -kind: Deployment -metadata: - name: cgit - labels: - app: cgit -spec: - replicas: 2 - selector: - matchLabels: - app: cgit - template: - metadata: - labels: - app: cgit - spec: - securityContext: - runAsUser: 1000 - runAsGroup: 1000 - fsGroup: 1000 - containers: - - name: cgit - image: nixery.local/shell/services.cgit-taz:{{ gitHEAD }} - command: [ "cgit-launch" ] - env: - - name: HOME - value: /git - volumeMounts: - - name: git-volume - mountPath: /git - - name: sync-gcsr - image: nixery.local/shell/services.sync-gcsr:{{ gitHEAD }} - command: [ "sync-gcsr" ] - env: - - name: SYNC_USER - valueFrom: - secretKeyRef: - name: gcsr-secrets - key: username - - name: SYNC_PASS - valueFrom: - secretKeyRef: - name: gcsr-secrets - key: password - volumeMounts: - - name: git-volume - mountPath: /git - volumes: - - name: git-volume - emptyDir: {} ---- -apiVersion: v1 -kind: Service -metadata: - name: cgit -spec: - selector: - app: cgit - ports: - - protocol: TCP - port: 80 - targetPort: 8080 diff --git a/infra/kubernetes/gemma/config.lisp b/infra/kubernetes/gemma/config.lisp deleted file mode 100644 index 517a658cf150..000000000000 --- a/infra/kubernetes/gemma/config.lisp +++ /dev/null @@ -1,19 +0,0 @@ -(config :port 4242 - :data-dir "/var/lib/gemma/") - -(deftask bathroom/wipe-mirror 7) -(deftask bathroom/wipe-counter 7) - -;; Bedroom tasks -(deftask bedroom/change-sheets 7) -(deftask bedroom/vacuum 10) - -;; Kitchen tasks -(deftask kitchen/normal-trash 3) -(deftask kitchen/green-trash 5) -(deftask kitchen/blue-trash 5) -(deftask kitchen/wipe-counters 3) -(deftask kitchen/vacuum 5 "Kitchen has more crumbs and such!") - -;; Entire place -(deftask clean-windows 60) diff --git a/infra/kubernetes/https-cert/cert.yaml b/infra/kubernetes/https-cert/cert.yaml deleted file mode 100644 index c7a85275ae67..000000000000 --- a/infra/kubernetes/https-cert/cert.yaml +++ /dev/null @@ -1,8 +0,0 @@ ---- -apiVersion: networking.gke.io/v1beta1 -kind: ManagedCertificate -metadata: - name: {{ .domain | replace "." "-" }} -spec: - domains: - - {{ .domain }} diff --git a/infra/kubernetes/https-lb/ingress.yaml b/infra/kubernetes/https-lb/ingress.yaml deleted file mode 100644 index 069771a4217f..000000000000 --- a/infra/kubernetes/https-lb/ingress.yaml +++ /dev/null @@ -1,35 +0,0 @@ -# This resource configures the HTTPS load balancer that is used as the -# entrypoint to all HTTPS services running in the cluster. ---- -apiVersion: extensions/v1beta1 -kind: Ingress -metadata: - name: https-ingress - annotations: - networking.gke.io/managed-certificates: tazj-in, git-tazj-in, www-tazj-in, oslo-pub -spec: - rules: - # Route blog to the blog ... - - host: tazj.in - http: - paths: - - path: /* - backend: - serviceName: tazblog - servicePort: 8000 - # Route git.tazj.in to the cgit pods - - host: git.tazj.in - http: - paths: - - path: /* - backend: - serviceName: nginx - servicePort: 6756 - # Route oslo.pub to the nginx instance which serves redirects - - host: oslo.pub - http: - paths: - - path: / - backend: - serviceName: nginx - servicePort: 6756 diff --git a/infra/kubernetes/nginx/nginx.conf b/infra/kubernetes/nginx/nginx.conf deleted file mode 100644 index 918aa6067806..000000000000 --- a/infra/kubernetes/nginx/nginx.conf +++ /dev/null @@ -1,59 +0,0 @@ -daemon off; -worker_processes 1; -error_log stderr; -pid /run/nginx.pid; - -events { - worker_connections 1024; -} - -http { - log_format json_combined escape=json - '{' - '"time_local":"$time_local",' - '"remote_addr":"$remote_addr",' - '"remote_user":"$remote_user",' - '"request":"$request",' - '"status": "$status",' - '"body_bytes_sent":"$body_bytes_sent",' - '"request_time":"$request_time",' - '"http_referrer":"$http_referer",' - '"http_user_agent":"$http_user_agent"' - '}'; - - access_log /dev/stdout json_combined; - - sendfile on; - keepalive_timeout 65; - - server { - listen 80 default_server; - location / { - return 200 "ok"; - } - } - - server { - listen 80; - server_name oslo.pub; - - location / { - return 302 https://www.google.com/maps/d/viewer?mid=1pJIYY9cuEdt9DuMTbb4etBVq7hs; - } - } - - server { - listen 80; - server_name git.tazj.in; - - # Static assets must always hit the root. - location ~ ^/(favicon\.ico|cgit\.(css|png))$ { - proxy_pass http://cgit; - } - - # Everything else hits the depot directly. - location / { - proxy_pass http://cgit/cgit.cgi/depot/; - } - } -} diff --git a/infra/kubernetes/nginx/nginx.yaml b/infra/kubernetes/nginx/nginx.yaml deleted file mode 100644 index 983b265bafab..000000000000 --- a/infra/kubernetes/nginx/nginx.yaml +++ /dev/null @@ -1,60 +0,0 @@ -# Deploy an nginx instance which serves ... redirects. ---- -apiVersion: v1 -kind: ConfigMap -metadata: - name: nginx-conf -data: - nginx.conf: {{ insertFile "nginx.conf" | toJson }} ---- -apiVersion: apps/v1 -kind: Deployment -metadata: - name: nginx - labels: - app: nginx -spec: - replicas: 2 - selector: - matchLabels: - app: nginx - template: - metadata: - labels: - app: nginx - config: {{ insertFile "nginx.conf" | sha1sum }} - spec: - containers: - - name: tazblog - image: nixery.local/shell/third_party.nginx:{{ .version }} - command: ["/bin/bash", "-c"] - args: - - | - cd /run - echo 'nogroup:x:30000:nobody' >> /etc/group - echo 'nobody:x:30000:30000:nobody:/tmp:/bin/bash' >> /etc/passwd - exec nginx -c /etc/nginx/nginx.conf - volumeMounts: - - name: nginx-conf - mountPath: /etc/nginx - - name: nginx-rundir - mountPath: /run - volumes: - - name: nginx-conf - configMap: - name: nginx-conf - - name: nginx-rundir - emptyDir: {} ---- -apiVersion: v1 -kind: Service -metadata: - name: nginx -spec: - type: NodePort - selector: - app: nginx - ports: - - protocol: TCP - port: 6756 - targetPort: 80 diff --git a/infra/kubernetes/nixery/config.yaml b/infra/kubernetes/nixery/config.yaml deleted file mode 100644 index 0775e79b5843..000000000000 --- a/infra/kubernetes/nixery/config.yaml +++ /dev/null @@ -1,67 +0,0 @@ -# Deploys an instance of Nixery into the cluster. -# -# The service via which Nixery is exposed has a private DNS entry -# pointing to it, which makes it possible to resolve `nixery.local` -# in-cluster without things getting nasty. ---- -apiVersion: apps/v1 -kind: Deployment -metadata: - name: nixery - namespace: kube-public - labels: - app: nixery -spec: - replicas: 1 - selector: - matchLabels: - app: nixery - template: - metadata: - labels: - app: nixery - spec: - containers: - - name: nixery - image: eu.gcr.io/tazjins-infrastructure/nixery:{{ .version }} - volumeMounts: - - name: nixery-secrets - mountPath: /var/nixery - env: - - name: BUCKET - value: {{ .bucket}} - - name: PORT - value: "{{ .port }}" - - name: GOOGLE_APPLICATION_CREDENTIALS - value: /var/nixery/gcs-key.json - - name: GCS_SIGNING_KEY - value: /var/nixery/gcs-key.pem - - name: GCS_SIGNING_ACCOUNT - value: {{ .account }} - - name: GIT_SSH_COMMAND - value: 'ssh -F /var/nixery/ssh_config' - - name: NIXERY_PKGS_REPO - value: {{ .repo }} - - name: NIX_POPULARITY_URL - value: 'https://storage.googleapis.com/nixery-layers/popularity/{{ .popularity }}' - volumes: - - name: nixery-secrets - secret: - secretName: nixery-secrets - defaultMode: 256 ---- -apiVersion: v1 -kind: Service -metadata: - name: nixery - namespace: kube-public - annotations: - cloud.google.com/load-balancer-type: "Internal" -spec: - selector: - app: nixery - type: LoadBalancer - ports: - - protocol: TCP - port: 80 - targetPort: 8080 diff --git a/infra/kubernetes/nixery/id_nixery.pub b/infra/kubernetes/nixery/id_nixery.pub deleted file mode 100644 index dc3fd617d0a1..000000000000 --- a/infra/kubernetes/nixery/id_nixery.pub +++ /dev/null @@ -1 +0,0 @@ -ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCzBM6ydst77jDHNcTFWKD9Fw4SReqyNEEp2MtQBk2wt94U4yLp8MQIuNeOEn1GaDEX4RGCxqai/2UVF1w9ZNdU+v2fXcKWfkKuGQH2XcNfXor2cVNObd40H78++iZiv3nmM/NaEdkTbTBbi925cRy9u5FgItDgsJlyKNRglCb0fr6KlgpvWjL20dp/eeZ8a/gLniHK8PnEsgERQSvJnsyFpxxVhxtoUiyLWpXDl4npf/rQr0eRDf4Q5sN/nbTwksapPHfze8dKcaoA7A2NqT3bJ6DPGrwVCzGRtGw/SXJwFwmmtAl9O6BklpeReyiknSxc+KOtrjDW6O0r6yvymD5Z nixery diff --git a/infra/kubernetes/nixery/known_hosts b/infra/kubernetes/nixery/known_hosts deleted file mode 100644 index 6a2f84b5fb60..000000000000 --- a/infra/kubernetes/nixery/known_hosts +++ /dev/null @@ -1,2 +0,0 @@ -github.com ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAq2A7hRGmdnm9tUDbO9IDSwBK6TbQa+PXYPCPy6rbTrTtw7PHkccKrpp0yVhp5HdEIcKr6pLlVDBfOLX9QUsyCOV0wzfjIJNlGEYsdlLJizHhbn2mUjvSAHQqZETYP81eFzLQNnPHt4EVVUh7VfDESU84KezmD5QlWpXLmvU31/yMf+Se8xhHTvKSCZIFImWwoG6mbUoWf9nzpIoaSjB+weqqUUmpaaasXVal72J+UX2B+2RPW3RcT0eOzQgqlJL3RKrTJvdsjE3JEAvGq3lGHSZXy28G3skua2SmVi/w4yCE6gbODqnTWlg7+wC604ydGXA8VJiS5ap43JXiUFFAaQ== -140.82.118.4 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAq2A7hRGmdnm9tUDbO9IDSwBK6TbQa+PXYPCPy6rbTrTtw7PHkccKrpp0yVhp5HdEIcKr6pLlVDBfOLX9QUsyCOV0wzfjIJNlGEYsdlLJizHhbn2mUjvSAHQqZETYP81eFzLQNnPHt4EVVUh7VfDESU84KezmD5QlWpXLmvU31/yMf+Se8xhHTvKSCZIFImWwoG6mbUoWf9nzpIoaSjB+weqqUUmpaaasXVal72J+UX2B+2RPW3RcT0eOzQgqlJL3RKrTJvdsjE3JEAvGq3lGHSZXy28G3skua2SmVi/w4yCE6gbODqnTWlg7+wC604ydGXA8VJiS5ap43JXiUFFAaQ== diff --git a/infra/kubernetes/nixery/secrets.yaml b/infra/kubernetes/nixery/secrets.yaml deleted file mode 100644 index d9a674d2c9fc..000000000000 --- a/infra/kubernetes/nixery/secrets.yaml +++ /dev/null @@ -1,18 +0,0 @@ -# The secrets below are encrypted using keys stored in Cloud KMS and -# templated in by kontemplate when deploying. -# -# Not all of the values are actually secret (see the matching) ---- -apiVersion: v1 -kind: Secret -metadata: - name: nixery-secrets - namespace: kube-public -type: Opaque -data: - gcs-key.json: {{ passLookup "nixery-gcs-json" | b64enc }} - gcs-key.pem: {{ passLookup "nixery-gcs-pem" | b64enc }} - id_nixery: {{ printf "%s\n" (passLookup "nixery-ssh-private") | b64enc }} - id_nixery.pub: {{ insertFile "id_nixery.pub" | b64enc }} - known_hosts: {{ insertFile "known_hosts" | b64enc }} - ssh_config: {{ insertFile "ssh_config" | b64enc }} diff --git a/infra/kubernetes/nixery/ssh_config b/infra/kubernetes/nixery/ssh_config deleted file mode 100644 index 78afbb0b039d..000000000000 --- a/infra/kubernetes/nixery/ssh_config +++ /dev/null @@ -1,4 +0,0 @@ -Match host * - User tazjin@google.com - IdentityFile /var/nixery/id_nixery - UserKnownHostsFile /var/nixery/known_hosts diff --git a/infra/kubernetes/primary-cluster.yaml b/infra/kubernetes/primary-cluster.yaml deleted file mode 100644 index 1d5d33e0bb26..000000000000 --- a/infra/kubernetes/primary-cluster.yaml +++ /dev/null @@ -1,38 +0,0 @@ -# Kontemplate configuration for the primary GKE cluster in the project -# 'tazjins-infrastructure'. ---- -context: gke_tazjins-infrastructure_europe-north1_tazjin-cluster -include: - # SSL certificates (provisioned by Google) - - name: tazj-in-cert - path: https-cert - values: - domain: tazj.in - - name: www-tazj-in-cert - path: https-cert - values: - domain: www.tazj.in - - name: git-tazj-in-cert - path: https-cert - values: - domain: git.tazj.in - - name: oslo-pub-cert - path: https-cert - values: - domain: oslo.pub - - # Services - - name: nixery - values: - port: 8080 - version: xkm36vrbcnzxdccybzdrx4qzfcfqfrhg - bucket: tazjins-data - account: nixery@tazjins-infrastructure.iam.gserviceaccount.com - repo: ssh://tazjin@gmail.com@source.developers.google.com:2022/p/tazjins-infrastructure/r/depot - popularity: 'popularity-nixos-unstable-3140fa89c51233397f496f49014f6b23216667c2.json' - - name: tazblog - - name: cgit - - name: https-lb - - name: nginx - values: - version: a349d5e9145ae9a6c89f62ec631f01fb180de546 diff --git a/infra/kubernetes/tazblog/config.yaml b/infra/kubernetes/tazblog/config.yaml deleted file mode 100644 index 165a30f6839b..000000000000 --- a/infra/kubernetes/tazblog/config.yaml +++ /dev/null @@ -1,34 +0,0 @@ ---- -apiVersion: apps/v1 -kind: Deployment -metadata: - name: tazblog - labels: - app: tazblog -spec: - replicas: 2 - selector: - matchLabels: - app: tazblog - template: - metadata: - labels: - app: tazblog - spec: - containers: - - name: tazblog - image: nixery.local/shell/services.tazblog:{{ gitHEAD }} - command: [ "tazblog" ] ---- -apiVersion: v1 -kind: Service -metadata: - name: tazblog -spec: - type: NodePort - selector: - app: tazblog - ports: - - protocol: TCP - port: 8000 - targetPort: 8000 diff --git a/infra/nixos/.gitignore b/infra/nixos/.gitignore deleted file mode 100644 index 773fa1667019..000000000000 --- a/infra/nixos/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -hardware-configuration.nix -local-configuration.nix -result diff --git a/infra/nixos/README.md b/infra/nixos/README.md deleted file mode 100644 index 4f2e870f9025..000000000000 --- a/infra/nixos/README.md +++ /dev/null @@ -1,23 +0,0 @@ -NixOS configuration -=================== - -My NixOS configuration! It configures most of the packages I require -on my systems, sets up Emacs the way I need and does a bunch of other -interesting things. - -In contrast with earlier versions of this configuration, the Nix -channel versions are now pinned in Nix (see the beginning of -[packages.nix][]). - -Machine-local configuration is kept in files with the naming scheme -`$hostname-configuration.nix` and **must** be symlinked to -`local-configuration.nix` before the first configuration run. - -I'm publishing this repository (and my [emacs configuration][]) as a -convenience for myself, but also as a resource that people looking for -example Nix or Emacs configurations can browse through. - -Feel free to ping me with any questions you might have. - -[packages.nix]: packages.nix -[emacs configuration]: https://github.com/tazjin/emacs.d diff --git a/infra/nixos/adho-configuration.nix b/infra/nixos/adho-configuration.nix deleted file mode 100644 index 11c5a97df59e..000000000000 --- a/infra/nixos/adho-configuration.nix +++ /dev/null @@ -1,200 +0,0 @@ -# Local configuration for 'adho' (Thinkpad T470s) -{ config, pkgs, ...}: - -{ - boot.initrd.luks.devices.adho.device = "/dev/disk/by-uuid/722006b0-9654-4ea1-8703-e0cf9ac1905e"; - boot.kernelModules = [ "kvm-intel" ]; - - services.xserver.libinput.enable = true; - services.xserver.videoDrivers = [ "intel" ]; - programs.light.enable = true; - - # Office printer configuration - services.printing.enable = true; - services.printing.drivers = [ pkgs.hplip ]; - services.avahi.enable = true; - services.avahi.nssmdns = true; - - # Enable VirtualBox to update Beatstep Pro firmware: - virtualisation.virtualbox.host.enable = true; - virtualisation.virtualbox.host.enableExtensionPack = true; - - # Enable LXC/LXD for Nixini work - virtualisation.lxd.enable = true; - - # Give me more entropy: - services.haveged.enable = true; - - # Disable sandbox to let work-builds function: - nix.useSandbox = false; - - # Yubikey related: - services.pcscd.enable = true; - environment.systemPackages = with pkgs; [ - cfssl - libp11 - opensc - yubico-piv-tool - ]; - - networking = { - hostName = "adho"; - wireless.enable = true; - wireless.userControlled.enable = true; - - wireless.networks = { - # Welcome to roast club! - "How do I computer?" = { - psk = "washyourface"; - }; - - # On the go! - "Rumpetroll" = { - psk = "fisk1234"; - # If this network exists, chances are that I want it: - priority = 10; - }; - - # Public places in Oslo: - "Abelone" = { - psk = "speakeasy"; - }; - - "Wurst" = { - psk = "wurst2015"; - }; - - "postkontoret" = { - psk = "postkontoret"; - }; - - # Eugene's apartment: - "GET_5G_4FD250" = { - psk = "62636342"; - }; - - # FSCONS 2017 - "uioguest" = {}; - - # Hackeriet! - "hackeriet.no" = { - psk = "hackeriet.no"; - }; - - # Cafe Sara - "Sara Nett" = { - psk = "sarabar1989"; - }; - - # The Dubliner - "DubGjest" = { - # of course - psk = "Guinness"; - }; - - "MAGNAT Guest" = { - psk = "elmolino021"; - }; - - "BrewDog" = { - psk = "welovebeer"; - }; - - # Dima's - "What's a Bad Idea?" = { - psk = "DQDxzrzIvy0YtDwH"; - }; - - # Loke's - "VMC28F76E" = { - psk = "d2ftQnr6xppw"; - }; - - "SafetyWiFi - Teknologihuset" = { - psk = "tech4ever"; - }; - - "Selvaag Pluss" = { - psk = "detlilleekstra"; - }; - - "Langler" = { - psk = "Oslo2018"; - }; - - # Pils & Programmering - "BEKKguest" = { - psk = "guest7890"; - }; - - "Homan-Gjest" = { - psk = "haveaniceday"; - }; - - # Røverstaden - "Roverstaden" = { - psk = "r0verstaden2018"; - }; - - "The Brew Dock" = { - psk = "realbeer"; - }; - - "econ-guest" = { - psk = "Finance2010"; - }; - - "KabelBox-2FD0" = { - psk = "92433048597489095671"; - }; - - "TheKasbah" = { - psk = "couscous"; - }; - - # Kitty's misspelled network. - "How do I Computer?" = { - psk = "herpderpponies"; - }; - - # NixCon 2018 - "Coin Street Community Builders " = { - psk = "3vents2016"; - }; - - "KH2 Gjest" = { - psk = "haenfindag"; - }; - - # Forest & Brown - "Forest Guest" = { - psk = "437B99AC5B"; - }; - - "Gatwick FREE Wi-Fi" = {}; - "mycloud" = {}; - "Norwegian Internet Access" = {}; - "NSB_INTERAKTIV" = {}; - "The Thief" = {}; - "espressohouse" = {}; - "Gotanet Open" = {}; - "wifi.flytoget.no" = {}; - "AIRPORT" = {}; - "ilcaffelovesyou" = {}; - "WIFIonICE" = {}; - "Lorry Gjest" = {}; - "Amundsengjest" = {}; - "Beer Palace Gjest" = {}; - "ibis" = {}; - "GoogleGuest" = {}; - }; - }; - - hardware.bluetooth.enable = true; - - # Configure POSIX queue limits (for work) - systemd.tmpfiles.rules = let mqueue = "/proc/sys/fs/mqueue"; in [ - "w ${mqueue}/msgsize_max - - - - ${toString (64 * 1024)}" - "w ${mqueue}/msg_max - - - - 50" - ]; -} diff --git a/infra/nixos/configuration.nix b/infra/nixos/configuration.nix deleted file mode 100644 index 57f5c56dc798..000000000000 --- a/infra/nixos/configuration.nix +++ /dev/null @@ -1,102 +0,0 @@ -# Edit this configuration file to define what should be installed on -# your system. Help is available in the configuration.nix(5) man page -# and in the NixOS manual (accessible by running ‘nixos-help’). - -{ config, lib, pkgs, ... }: - -{ - imports = - [ - ./desktop.nix - ./dotfiles.nix - ./hardware-configuration.nix - ./local-configuration.nix - ./mail.nix - ./packages.nix - ]; - - # Use the systemd-boot EFI boot loader. - boot.loader.systemd-boot.enable = true; - boot.loader.efi.canTouchEfiVariables = true; - boot.cleanTmpDir = true; - hardware.pulseaudio.enable = true; - time.timeZone = "Europe/Oslo"; - - # Configure audio setup for JACK + Overtone - boot.kernelModules = [ "snd-seq" "snd-rawmidi" ]; - hardware.pulseaudio.package = pkgs.pulseaudioFull; - - # Update Intel microcode on boot (both machines have Intel CPUs): - hardware.cpu.intel.updateMicrocode = true; - - networking = { - # Don't use ISP's DNS servers: - nameservers = [ - "1.1.1.1" - "1.0.0.1" - ]; - - # Open Chromecast-related ports & servedir - firewall.allowedTCPPorts = [ 3000 5556 5558 ]; - }; - - # Generate an immutable /etc/resolv.conf from the nameserver settings - # above (otherwise DHCP overwrites it): - environment.etc."resolv.conf" = with lib; with pkgs; { - source = writeText "resolv.conf" '' - ${concatStringsSep "\n" (map (ns: "nameserver ${ns}") config.networking.nameservers)} - options edns0 - ''; - }; - - # Configure emacs: - # (actually, that's a lie, this only installs emacs!) - services.emacs = { - install = true; - defaultEditor = true; - package = import ./emacs.nix { inherit pkgs; }; - }; - - services.openssh.enable = true; - - # Enable GNOME keyring (required for Evolution) - services.gnome3.gnome-keyring.enable = true; - - virtualisation = { - # Configure Docker (with socket activation): - # Side note: ... why is this in virtualisation? ... - docker.enable = true; - docker.autoPrune.enable = true; - }; - - # Configure various other applications: - programs = { - java.enable = true; - java.package = pkgs.openjdk; - - fish.enable = true; - ssh.startAgent = true; - }; - - services.postgresql.enable = true; - - # Configure user account - users.defaultUserShell = pkgs.fish; - users.extraUsers.vincent = { - extraGroups = [ "wheel" "docker" "vboxusers" "lxd" ]; - isNormalUser = true; - uid = 1000; - shell = pkgs.fish; - }; - - security.sudo = { - enable = true; - extraConfig = "wheel ALL=(ALL:ALL) SETENV: ALL"; - }; - - # This value determines the NixOS release with which your system is to be - # compatible, in order to avoid breaking some software such as database - # servers. You should change this only after NixOS release notes say you - # should. - system.stateVersion = "18.03"; # Did you read the comment? -} diff --git a/infra/nixos/default.nix b/infra/nixos/default.nix deleted file mode 100644 index 42594f6f5859..000000000000 --- a/infra/nixos/default.nix +++ /dev/null @@ -1,6 +0,0 @@ -{ ... }: - -builtins.throw '' - The Nix derivations at infra/nixos are not meant to be evaluated - like a derivation as they represent NixOS configuration. -'' diff --git a/infra/nixos/desktop.nix b/infra/nixos/desktop.nix deleted file mode 100644 index 07a6274a568c..000000000000 --- a/infra/nixos/desktop.nix +++ /dev/null @@ -1,82 +0,0 @@ -# Configuration for the desktop environment - -{ config, lib, pkgs, ... }: - -let emacs = import ./emacs.nix { inherit pkgs; }; -screenLock = pkgs.writeShellScriptBin "screen-lock" '' - find ${pkgs.wallpapers} -name "*.png" | shuf -n1 | xargs i3lock -f -t -i -''; -in { - # Configure basic X-server stuff: - services.xserver = { - enable = true; - layout = "us,no"; - xkbOptions = "caps:super, grp:shifts_toggle, parens:swap_brackets"; - exportConfiguration = true; - - # Give EXWM permission to control the session. - displayManager.sessionCommands = "${pkgs.xorg.xhost}/bin/xhost +SI:localuser:$USER"; - - # Use the pre 18.09 default display manager (slim) - displayManager.slim.enable = true; - }; - - # Add a shell script with random screen lock wallpaper selection - environment.systemPackages = [ screenLock ]; - - # Apparently when you have house guests they complain about your screen tearing! - services.compton.enable = true; - services.compton.backend = "xrender"; - - # Configure desktop environment: - services.xserver.windowManager.session = lib.singleton { - name = "exwm"; - start = '' - ${emacs}/bin/emacs --eval '(progn (server-start) (exwm-enable))' - ''; - }; - - # Configure Redshift for Oslo - services.redshift = { - enable = true; - latitude = "59.911491"; - longitude = "10.757933"; - }; - - # Configure fonts - fonts = { - fonts = with pkgs; [ - corefonts - font-awesome-ttf - input-fonts - noto-fonts-cjk - noto-fonts-emoji - powerline-fonts - helvetica-neue-lt-std - ]; - }; - - # Configure random setting of wallpapers - systemd.user.services.feh-wp = { - description = "Randomly set wallpaper via feh"; - serviceConfig = { - Type = "oneshot"; - WorkingDirectory = "${pkgs.wallpapers}/share/wallpapers"; - - # Manually shuffle because feh's --randomize option can't be restricted to - # just certain file types. - ExecStart = "${pkgs.bash}/bin/bash -c '${pkgs.fd}/bin/fd -atf | shuf | head -n1 | ${pkgs.findutils}/bin/xargs ${pkgs.feh}/bin/feh --bg-fill'"; - }; - }; - - systemd.user.timers.feh-wp = { - description = "Set a random wallpaper every hour"; - wantedBy = [ "graphical-session.target" ]; - partOf = [ "graphical-session.target" ]; - - timerConfig = { - OnActiveSec = "1second"; - OnUnitActiveSec = "1hour"; - }; - }; -} diff --git a/infra/nixos/dotfiles.nix b/infra/nixos/dotfiles.nix deleted file mode 100644 index 2e952207d47d..000000000000 --- a/infra/nixos/dotfiles.nix +++ /dev/null @@ -1,27 +0,0 @@ -# Bundle configuration files into a derivation. -# I call this derivation dotfiles despite that not technically being true -# anymore ... - -{ config, pkgs, ...}: - -let dotfiles = pkgs.stdenv.mkDerivation { - name = "tazjins-dotfiles"; - - srcs = [ - ./dotfiles - ]; - - installPhase = '' - mkdir -p $out - cp ./* $out/ - ''; -}; -in { - # /etc/ is a special place in NixOS! - # Symlinks that need to be created there must be specified explicitly. - environment.etc = { - "alacritty.yml".source = "${dotfiles}/alacritty.yml"; - "fish/config.fish".source = "${dotfiles}/config.fish"; - "tmux.conf".source = "${dotfiles}/tmux.conf"; - }; -} diff --git a/infra/nixos/dotfiles/alacritty.yml b/infra/nixos/dotfiles/alacritty.yml deleted file mode 100644 index d229fbdde67f..000000000000 --- a/infra/nixos/dotfiles/alacritty.yml +++ /dev/null @@ -1,203 +0,0 @@ -# Configuration for Alacritty, the GPU enhanced terminal emulator - -# Any items in the `env` entry below will be added as -# environment variables. Some entries may override variables -# set by alacritty it self. -env: - TERM: xterm-256color - -window: - # TODO - decorations: full - -scrolling: - history: 10000 - multiplier: 3 - faux_multiplier: 3 - auto_scroll: true # TODO - -# Display tabs using this many cells (changes require restart) -tabspaces: 4 - -# When true, bold text is drawn using the bright variant of colors. -draw_bold_text_with_bright_colors: true - -# Font configuration (changes require restart) -font: - # The normal (roman) font face to use. - normal: - family: Input Mono - bold: - family: Input Mono - italic: - family: Input Mono - - # Point size of the font - size: 12.0 - - # Scale the font size based on the monitor's DPI. - scale_with_dpi: false - -# Use custom cursor colors. If true, display the cursor in the cursor.foreground -# and cursor.background colors, otherwise invert the colors of the cursor. -custom_cursor_colors: false - -# Colors (Gruber Darker) -colors: - # Default colors - primary: - background: '0x181818' - foreground: '0xe4e4ef' - - # Colors the cursor will use if `custom_cursor_colors` is true - cursor: - text: '0x000000' - cursor: '0xf5f5f5' - - # Normal colors - normal: - black: '0x282828' - red: '0xf43841' - green: '0x73c936' - yellow: '0xffdd33' - blue: '0x96a6c8' - magenta: '0x9e95c7' - cyan: '0x1fad83' - white: '0xf5f5f5' - - # Bright colors - bright: - black: '0x484848' - red: '0xff4f58' - green: '0x73c936' - yellow: '0xffdd33' - blue: '0x5f627f' - magenta: '0x9e95c7' - cyan: '0x1fad83' - white: '0xffffff' - -# Background opacity -# Key bindings -# -# Each binding is defined as an object with some properties. Most of the -# properties are optional. All of the alphabetical keys should have a letter for -# the `key` value such as `V`. Function keys are probably what you would expect -# as well (F1, F2, ..). The number keys above the main keyboard are encoded as -# `Key1`, `Key2`, etc. Keys on the number pad are encoded `Number1`, `Number2`, -# etc. These all match the glutin::VirtualKeyCode variants. -# -# Possible values for `mods` -# `Command`, `Super` refer to the super/command/windows key -# `Control` for the control key -# `Shift` for the Shift key -# `Alt` and `Option` refer to alt/option -# -# mods may be combined with a `|`. For example, requiring control and shift -# looks like: -# -# mods: Control|Shift -# -# The parser is currently quite sensitive to whitespace and capitalization - -# capitalization must match exactly, and piped items must not have whitespace -# around them. -# -# Either an `action`, `chars`, or `command` field must be present. -# `action` must be one of `Paste`, `PasteSelection`, `Copy`, or `Quit`. -# `chars` writes the specified string every time that binding is activated. -# These should generally be escape sequences, but they can be configured to -# send arbitrary strings of bytes. -# `command` must be a map containing a `program` string, and `args` array of -# strings. For example: -# - { ... , command: { program: "alacritty", args: ["-e", "vttest"] } } -# -# Want to add a binding (e.g. "PageUp") but are unsure what the X sequence -# (e.g. "\x1b[5~") is? Open another terminal (like xterm) without tmux, -# then run `showkey -a` to get the sequence associated to a key combination. -key_bindings: - - { key: V, mods: Control|Shift, action: Paste } - - { key: C, mods: Control|Shift, action: Copy } - - { key: Q, mods: Command, action: Quit } - - { key: W, mods: Command, action: Quit } - - { key: Insert, mods: Shift, action: PasteSelection } - - { key: Home, chars: "\x1bOH", mode: AppCursor } - - { key: Home, chars: "\x1b[H", mode: ~AppCursor } - - { key: End, chars: "\x1bOF", mode: AppCursor } - - { key: End, chars: "\x1b[F", mode: ~AppCursor } - - { key: PageUp, mods: Shift, chars: "\x1b[5;2~" } - - { key: PageUp, mods: Control, chars: "\x1b[5;5~" } - - { key: PageUp, chars: "\x1b[5~" } - - { key: PageDown, mods: Shift, chars: "\x1b[6;2~" } - - { key: PageDown, mods: Control, chars: "\x1b[6;5~" } - - { key: PageDown, chars: "\x1b[6~" } - - { key: Left, mods: Shift, chars: "\x1b[1;2D" } - - { key: Left, mods: Control, chars: "\x1b[1;5D" } - - { key: Left, mods: Alt, chars: "\x1b[1;3D" } - - { key: Left, chars: "\x1b[D", mode: ~AppCursor } - - { key: Left, chars: "\x1bOD", mode: AppCursor } - - { key: Right, mods: Shift, chars: "\x1b[1;2C" } - - { key: Right, mods: Control, chars: "\x1b[1;5C" } - - { key: Right, mods: Alt, chars: "\x1b[1;3C" } - - { key: Right, chars: "\x1b[C", mode: ~AppCursor } - - { key: Right, chars: "\x1bOC", mode: AppCursor } - - { key: Up, mods: Shift, chars: "\x1b[1;2A" } - - { key: Up, mods: Control, chars: "\x1b[1;5A" } - - { key: Up, mods: Alt, chars: "\x1b[1;3A" } - - { key: Up, chars: "\x1b[A", mode: ~AppCursor } - - { key: Up, chars: "\x1bOA", mode: AppCursor } - - { key: Down, mods: Shift, chars: "\x1b[1;2B" } - - { key: Down, mods: Control, chars: "\x1b[1;5B" } - - { key: Down, mods: Alt, chars: "\x1b[1;3B" } - - { key: Down, chars: "\x1b[B", mode: ~AppCursor } - - { key: Down, chars: "\x1bOB", mode: AppCursor } - - { key: Tab, mods: Shift, chars: "\x1b[Z" } - - { key: F1, chars: "\x1bOP" } - - { key: F2, chars: "\x1bOQ" } - - { key: F3, chars: "\x1bOR" } - - { key: F4, chars: "\x1bOS" } - - { key: F5, chars: "\x1b[15~" } - - { key: F6, chars: "\x1b[17~" } - - { key: F7, chars: "\x1b[18~" } - - { key: F8, chars: "\x1b[19~" } - - { key: F9, chars: "\x1b[20~" } - - { key: F10, chars: "\x1b[21~" } - - { key: F11, chars: "\x1b[23~" } - - { key: F12, chars: "\x1b[24~" } - - { key: Back, chars: "\x7f" } - - { key: Back, mods: Alt, chars: "\x1b\x7f" } - - { key: Insert, chars: "\x1b[2~" } - - { key: Delete, chars: "\x1b[3~" } - -# Mouse bindings -# -# Currently doesn't support modifiers. Both the `mouse` and `action` fields must -# be specified. -# -# Values for `mouse`: -# - Middle -# - Left -# - Right -# - Numeric identifier such as `5` -# -# Values for `action`: -# - Paste -# - PasteSelection -# - Copy (TODO) -mouse_bindings: - - { mouse: Middle, action: PasteSelection } - -mouse: - double_click: { threshold: 300 } - triple_click: { threshold: 300 } - -selection: - semantic_escape_chars: ",│`|:\"' ()[]{}<>" -background_opacity: 1.0 - -hide_cursor_when_typing: false - -# Live config reload (changes require restart) -live_config_reload: true - -# Disable visual bell -visual_bell: - duration: 0 diff --git a/infra/nixos/dotfiles/config.fish b/infra/nixos/dotfiles/config.fish deleted file mode 100644 index de2c99ae6007..000000000000 --- a/infra/nixos/dotfiles/config.fish +++ /dev/null @@ -1,40 +0,0 @@ -# Configure classic prompt -set fish_color_user --bold blue -set fish_color_cwd --bold white - -# Enable colour hints in VCS prompt: -set __fish_git_prompt_showcolorhints yes -set __fish_git_prompt_color_prefix purple -set __fish_git_prompt_color_suffix purple - -# Fish configuration -set fish_greeting "" -set PATH $HOME/.local/bin $HOME/.cargo/bin $PATH - -# Editor configuration -set -gx EDITOR "emacsclient" -set -gx ALTERNATE_EDITOR "emacs -q -nw" -set -gx VISUAL "emacsclient" - -# Miscellaneous -eval (direnv hook fish) - -# Useful command aliases -alias gpr 'git pull --rebase' -alias gco 'git checkout' -alias gf 'git fetch' -alias gap 'git add -p' -alias pbcopy 'xclip -selection clipboard' -alias edit 'emacsclient -n' -alias servedir 'nix-shell -p haskellPackages.wai-app-static --run warp' - -# Old habits die hard (also ls is just easier to type): -alias ls 'exa' - -# Fix up nix-env & friends for Nix 2.0 -export NIX_REMOTE=daemon - -# Fix display of fish in emacs' term-mode: -function fish_title - true -end diff --git a/infra/nixos/dotfiles/msmtprc b/infra/nixos/dotfiles/msmtprc deleted file mode 100644 index 624b6a77fc4b..000000000000 --- a/infra/nixos/dotfiles/msmtprc +++ /dev/null @@ -1,16 +0,0 @@ -defaults - -port 587 -tls on -tls_trust_file /etc/ssl/certs/ca-certificates.crt - -# Runbox mail -account runbox -from mail@tazj.in -host mail.runbox.com -auth on -user mail@tazj.in -passwordeval pass show general/runbox-tazjin - -# Use Runbox as default -account default : runbox diff --git a/infra/nixos/dotfiles/notmuch-config b/infra/nixos/dotfiles/notmuch-config deleted file mode 100644 index a490774e635f..000000000000 --- a/infra/nixos/dotfiles/notmuch-config +++ /dev/null @@ -1,21 +0,0 @@ -# .notmuch-config - Configuration file for the notmuch mail system -# -# For more information about notmuch, see https://notmuchmail.org - -[database] -path=/home/vincent/mail - -[user] -name=Vincent Ambo -primary_email=mail@tazj.in -other_email=tazjin@gmail.com; - -[new] -tags=unread;inbox; -ignore= - -[search] -exclude_tags=deleted;spam;draft; - -[maildir] -synchronize_flags=true diff --git a/infra/nixos/dotfiles/offlineimaprc b/infra/nixos/dotfiles/offlineimaprc deleted file mode 100644 index 78315447e4bd..000000000000 --- a/infra/nixos/dotfiles/offlineimaprc +++ /dev/null @@ -1,39 +0,0 @@ -[general] -accounts = tazjin, gmail - -[DEFAULT] -ssl = yes -sslcacertfile = /etc/ssl/certs/ca-certificates.crt - -# Private GMail account (old): -[Account gmail] -maxage = 90 -localrepository = gmail-local -remoterepository = gmail-remote -synclabels = yes - -[Repository gmail-local] -type = GmailMaildir -localfolders = ~/mail/gmail - -[Repository gmail-remote] -type = Gmail -remoteuser = tazjin@gmail.com -remotepassfile = ~/.config/mail/gmail-pass -folderfilter = lambda folder: folder == 'INBOX' - -# Main private account: -[Account tazjin] -localrepository = tazjin-local -remoterepository = tazjin-remote - -[Repository tazjin-local] -type = Maildir -localfolders = ~/mail/tazjin - -[Repository tazjin-remote] -type = IMAP -remotehost = mail.runbox.com -remoteuser = mail@tazj.in -remotepassfile = ~/.config/mail/tazjin-pass -auth_mechanisms = LOGIN diff --git a/infra/nixos/dotfiles/tmux.conf b/infra/nixos/dotfiles/tmux.conf deleted file mode 100644 index 6c20ae0370b2..000000000000 --- a/infra/nixos/dotfiles/tmux.conf +++ /dev/null @@ -1,14 +0,0 @@ -set -g status off -set -gw mode-keys emacs -setw -g mouse on - -# Correctly set window titles -set -g set-titles on -set -g set-titles-string "#W (#T)" - -# List of plugins -set -g @plugin 'tmux-plugins/tpm' -set -g @plugin 'tmux-plugins/tmux-yank' - -# Initialize TMUX plugin manager (keep this line at the very bottom of tmux.conf) -run '~/.tmux/plugins/tpm/tpm' diff --git a/infra/nixos/home.nix b/infra/nixos/home.nix deleted file mode 100644 index 236091cb019d..000000000000 --- a/infra/nixos/home.nix +++ /dev/null @@ -1,75 +0,0 @@ -# home-manager configuration used on ChromeOS systems - -{ config, pkgs, ... }: - -{ - # Allow non-free software (fonts, IDEA, etc.): - nixpkgs.config.allowUnfree = true; - - # Install various useful packages: - home.packages = with pkgs; [ - bat - exa - gnupg - google-cloud-sdk - htop - pass - ripgrep - tdesktop - transmission - tree - - # Fonts to make available in X11 applications: - input-fonts - - # Emacs configuration stays in the normal ~/.emacs.d location (for - # now), hence this package is not installed via `programs.emacs`. - (import ./emacs.nix { inherit pkgs; }) - ]; - - programs.git = { - enable = true; - userEmail = "mail@tazj.in"; - userName = "Vincent Ambo"; - }; - - services.gpg-agent = { - enable = true; - extraConfig = '' - pinentry-program ${pkgs.pinentry}/bin/pinentry-gtk-2 - allow-emacs-pinentry - ''; - }; - - # Let Home Manager install and manage itself. - programs.home-manager.enable = true; - manual.html.enable = true; - - # Shell configuration - # - # There are some differences between the ChromeOS / NixOS - # configurations, so instead of fixing up the dotfile to support - # both I opted for keeping the configuration here. - programs.fish = { - enable = true; - interactiveShellInit = '' - # Configure classic prompt - set fish_color_user --bold blue - set fish_color_cwd --bold white - - # Enable colour hints in VCS prompt: - set __fish_git_prompt_showcolorhints yes - set __fish_git_prompt_color_prefix purple - set __fish_git_prompt_color_suffix purple - - # Fish configuration - set fish_greeting "" - - # Fix up nix-env & friends for Nix 2.0 - export NIX_REMOTE=daemon - ''; - }; - - # Ensure fonts installed via Nix are picked up. - fonts.fontconfig.enableProfileFonts = true; -} diff --git a/infra/nixos/mail.nix b/infra/nixos/mail.nix deleted file mode 100644 index ba4ebfa06026..000000000000 --- a/infra/nixos/mail.nix +++ /dev/null @@ -1,77 +0,0 @@ -# This file configures offlineimap, notmuch and MSMTP. -# -# Some manual configuration is required the first time this is -# applied: -# -# 1. Credential setup. -# 2. Linking of MSMTP config (ln -s /etc/msmtprc ~/.msmtprc) -# 3. Linking of notmuch config (ln -s /etc/notmuch-config ~/.notmuch-config) - -{ config, lib, pkgs, ... }: - -let offlineImapConfig = pkgs.writeText "offlineimaprc" - (builtins.readFile ./dotfiles/offlineimaprc); - -msmtpConfig = pkgs.writeText "msmtprc" - (builtins.readFile ./dotfiles/msmtprc); - -notmuchConfig = pkgs.writeText "notmuch-config" - (builtins.readFile ./dotfiles/notmuch-config); - -tagConfig = pkgs.writeText "notmuch-tags" '' - # Tag emacs-devel mailing list: - -inbox +emacs-devel -- to:emacs-devel@gnu.org OR cc:emacs-devel@gnu.org - - # Tag nix-devel mailing list & discourse: - -inbox +nix-devel -- to:nix-devel@googlegroups.com OR from:nixos1@discoursemail.com - - # Tag my own mail (from other devices) as sent: - -inbox +sent -- from:mail@tazj.in - - # Drafts are always read, duh. - -unread -- tag:draft -''; - -notmuchIndex = pkgs.writeShellScriptBin "notmuch-index" '' - echo "Indexing new mails in notmuch" - - # Index new mail - ${pkgs.notmuch}/bin/notmuch new - - # Apply tags - cat ${tagConfig} | ${pkgs.notmuch}/bin/notmuch tag --batch - - echo "Done indexing new mails" -''; -in { - # Enable OfflineIMAP timer & service: - systemd.user.timers.offlineimap = { - description = "OfflineIMAP timer"; - wantedBy = [ "timers.target" ]; - - timerConfig = { - Unit = "offlineimap.service"; - OnCalendar = "*:0/2"; # every 2 minutes - Persistent = "true"; # persist timer state after reboots - }; - }; - - systemd.user.services.offlineimap = { - description = "OfflineIMAP service"; - path = with pkgs; [ pass notmuch ]; - - serviceConfig = { - Type = "oneshot"; - ExecStart = "${pkgs.offlineimap}/bin/offlineimap -u syslog -o -c ${offlineImapConfig}"; - ExecStartPost = "${notmuchIndex}/bin/notmuch-index"; - TimeoutStartSec = "2min"; - }; - }; - - # Link configuration files to /etc/ (from where they will be linked - # further): - environment.etc = { - "msmtprc".source = msmtpConfig; - "notmuch-config".source = notmuchConfig; - }; -} diff --git a/infra/nixos/packages.nix b/infra/nixos/packages.nix deleted file mode 100644 index b90a4a9ee8b4..000000000000 --- a/infra/nixos/packages.nix +++ /dev/null @@ -1,132 +0,0 @@ -# This file contains configuration for packages to install. -# It does not contain configuration for software that is already covered -# by other NixOS options (e.g. emacs) - -{ config, pkgs, ... }: - -let - fetchChannel = { rev, sha256 }: import (fetchTarball { - inherit sha256; - url = "https://github.com/NixOS/nixpkgs-channels/archive/${rev}.tar.gz"; - }) { config.allowUnfree = true; }; - - # Channels last updated: 2018-10-10 - # - # Instead of relying on Nix channels and ending up with out-of-sync - # situations between machines, the commit for the stable Nix channel - # is pinned here. - stable = fetchChannel { - rev = "d96c7a356383302db4426a0d5a8383af921d964f"; - sha256 = "0hlhczh3m077rwrhp4smf3zd2sfj38h2c126bycv66m0aff0gycn"; - }; - - # Certain packages from unstable are hand-picked into the package - # set. - unstable = fetchChannel { - rev = "32bcd72bf28a971c9063a9cdcc32effe49f49331"; - sha256 = "1f74m18r6xl9s55jbkj9bjhdxg2489kwjam4d96pf9rzq0i1f8li"; - }; -in { - # Configure the Nix package manager - nixpkgs = { - config.allowUnfree = true; - # To use the pinned channel, the original package set is thrown - # away in the overrides: - config.packageOverrides = oldPkgs: stable // { - # Store whole unstable channel in case that other modules need - # it (see emacs.nix for example): - inherit unstable; - - # Backport Exa from unstable until a fix for the Rust builder is - # backported. - # - # https://github.com/NixOS/nixpkgs/pull/48020 - exa = unstable.exa; - - wallpapers = import ./pkgs/wallpapers.nix; - pulseaudio-ctl = import pkgs/pulseaudio-ctl.nix; - }; - }; - - # ... and declare packages to be installed. - environment.systemPackages = with pkgs; [ - # Default nixos.* packages: - alacritty - binutils-unwrapped - chromium - curl - direnv - dnsutils - dotnet-sdk - evince - exa - extremetuxracer - fd - file - firefox-unwrapped - fish - gcc - git - gnumake - gnupg - google-cloud-sdk - gopass - hicolor-icon-theme - htop - i3lock - iftop - jq - kontemplate - kubernetes - lispPackages.quicklisp - lxappearance-gtk3 - manpages - maven - mono - mq-cli - msmtp - ngrok - notmuch - numix-cursor-theme - numix-gtk-theme - numix-icon-theme - offlineimap - openjdk - openssl - openssl.dev - pass - pavucontrol - pkgconfig - pulseaudio-ctl - pwgen - ripgrep - rustup - sbcl - screen - siege - spotify - stdmanpages - systemd.dev - tdesktop - terraform - tig - tmux - tokei - transmission - tree - units - unzip - vlc - xclip - xfce.xfce4-screenshooter - - # Haskell packages: - cabal-install - ghc - hlint - stack - stack2nix - haskellPackages.stylish-haskell - haskellPackages.yesod-bin - ]; -} diff --git a/infra/nixos/stallo-configuration.nix b/infra/nixos/stallo-configuration.nix deleted file mode 100644 index 4af4a5fd4c22..000000000000 --- a/infra/nixos/stallo-configuration.nix +++ /dev/null @@ -1,39 +0,0 @@ -# Local configuration for 'stallo' (Home desktop PC) -{ config, pkgs, ...}: - -{ - boot.initrd.luks.devices.stallo-luks.device = "/dev/disk/by-uuid/b484cf1e-a27b-4785-8bd6-fa85a004b073"; - - # Use proprietary nvidia driver - services.xserver.videoDrivers = [ "nvidia" ]; - - # Enable 32-bit compatibility for Steam: - hardware.opengl.driSupport32Bit = true; - hardware.pulseaudio.support32Bit = true; - - # Wine for Blizzard stuff - environment.systemPackages = with pkgs.unstable; [ wineWowPackages.staging winetricks ]; - - networking = { - hostName = "stallo"; - wireless.enable = true; - wireless.networks = { - # Welcome to roast club! - - "How do I computer fast?" = { - psk = "washyourface"; - # Prefer 5Ghz unless the card is acting up. - priority = 10; - }; - - "How do I computer?" = { - psk = "washyourface"; - }; - }; - # IPv6 at home, of course: - nameservers = [ - "2606:4700:4700::1111" - "2606:4700:4700::1001" - ]; - }; -} |