diff options
Diffstat (limited to 'doc/manual/expressions/builtins.xml')
| -rw-r--r-- | doc/manual/expressions/builtins.xml | 950 |
1 files changed, 950 insertions, 0 deletions
diff --git a/doc/manual/expressions/builtins.xml b/doc/manual/expressions/builtins.xml new file mode 100644 index 000000000000..4edb3a1a76fb --- /dev/null +++ b/doc/manual/expressions/builtins.xml @@ -0,0 +1,950 @@ +<section xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id='ssec-builtins'> + +<title>Built-in Functions</title> + +<para>This section lists the functions and constants built into the +Nix expression evaluator. (The built-in function +<function>derivation</function> is discussed above.) Some built-ins, +such as <function>derivation</function>, are always in scope of every +Nix expression; you can just access them right away. But to prevent +polluting the namespace too much, most built-ins are not in scope. +Instead, you can access them through the <varname>builtins</varname> +built-in value, which is a set that contains all built-in functions +and values. For instance, <function>derivation</function> is also +available as <function>builtins.derivation</function>.</para> + + +<variablelist> + + + <varlistentry><term><function>abort</function> <replaceable>s</replaceable></term> + + <listitem><para>Abort Nix expression evaluation, print error + message <replaceable>s</replaceable>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.add</function> + <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> + + <listitem><para>Return the sum of the integers + <replaceable>e1</replaceable> and + <replaceable>e2</replaceable>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.attrNames</function> + <replaceable>set</replaceable></term> + + <listitem><para>Return the names of the attributes in the set + <replaceable>set</replaceable> in a sorted list. For instance, + <literal>builtins.attrNames { y = 1; x = "foo"; }</literal> + evaluates to <literal>[ "x" "y" ]</literal>. There is no built-in + function <function>attrValues</function>, but you can easily + define it yourself: + +<programlisting> +attrValues = set: map (name: builtins.getAttr name set) (builtins.attrNames set);</programlisting> + + </para></listitem> + + </varlistentry> + + + <varlistentry><term><function>baseNameOf</function> <replaceable>s</replaceable></term> + + <listitem><para>Return the <emphasis>base name</emphasis> of the + string <replaceable>s</replaceable>, that is, everything following + the final slash in the string. This is similar to the GNU + <command>basename</command> command.</para></listitem> + + </varlistentry> + + + <varlistentry><term><varname>builtins</varname></term> + + <listitem><para>The set <varname>builtins</varname> contains all + the built-in functions and values. You can use + <varname>builtins</varname> to test for the availability of + features in the Nix installation, e.g., + +<programlisting> +if builtins ? getEnv then builtins.getEnv "PATH" else ""</programlisting> + + This allows a Nix expression to fall back gracefully on older Nix + installations that don’t have the desired built-in + function.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.compareVersions</function> + <replaceable>s1</replaceable> <replaceable>s2</replaceable></term> + + <listitem><para>Compare two strings representing versions and + return <literal>-1</literal> if version + <replaceable>s1</replaceable> is older than version + <replaceable>s2</replaceable>, <literal>0</literal> if they are + the same, and <literal>1</literal> if + <replaceable>s1</replaceable> is newer than + <replaceable>s2</replaceable>. The version comparison algorithm + is the same as the one used by <link + linkend="ssec-version-comparisons"><command>nix-env + -u</command></link>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.concatLists</function> + <replaceable>lists</replaceable></term> + + <listitem><para>Concatenate a list of lists into a single + list.</para></listitem> + + </varlistentry> + + + <varlistentry + xml:id='builtin-currentSystem'><term><varname>builtins.currentSystem</varname></term> + + <listitem><para>The built-in value <varname>currentSystem</varname> + evaluates to the Nix platform identifier for the Nix installation + on which the expression is being evaluated, such as + <literal>"i686-linux"</literal> or + <literal>"powerpc-darwin"</literal>.</para></listitem> + + </varlistentry> + + + <!-- + <varlistentry><term><function>currentTime</function></term> + + <listitem><para>The built-in value <varname>currentTime</varname> + returns the current system time in seconds since 00:00:00 1/1/1970 + UTC. Due to the evaluation model of Nix expressions + (<emphasis>maximal laziness</emphasis>), it always yields the same + value within an execution of Nix.</para></listitem> + + </varlistentry> + --> + + + <!-- + <varlistentry><term><function>dependencyClosure</function></term> + + <listitem><para>TODO</para></listitem> + + </varlistentry> + --> + + + <varlistentry><term><function>derivation</function> + <replaceable>attrs</replaceable></term> + + <listitem><para><function>derivation</function> is described in + <xref linkend='ssec-derivation' />.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>dirOf</function> <replaceable>s</replaceable></term> + + <listitem><para>Return the directory part of the string + <replaceable>s</replaceable>, that is, everything before the final + slash in the string. This is similar to the GNU + <command>dirname</command> command.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.div</function> + <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> + + <listitem><para>Return the quotient of the integers + <replaceable>e1</replaceable> and + <replaceable>e2</replaceable>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.elem</function> + <replaceable>x</replaceable> <replaceable>xs</replaceable></term> + + <listitem><para>Return <literal>true</literal> if a value equal to + <replaceable>x</replaceable> occurs in the list + <replaceable>xs</replaceable>, and <literal>false</literal> + otherwise.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.elemAt</function> + <replaceable>xs</replaceable> <replaceable>n</replaceable></term> + + <listitem><para>Return element <replaceable>n</replaceable> from + the list <replaceable>xs</replaceable>. Elements are counted + starting from 0. A fatal error occurs in the index is out of + bounds.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.filter</function> + <replaceable>f</replaceable> <replaceable>xs</replaceable></term> + + <listitem><para>Return a list consisting of the elements of + <replaceable>xs</replaceable> for which the function + <replaceable>f</replaceable> returns + <literal>true</literal>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.filterSource</function> + <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> + + <listitem> + + <para>This function allows you to copy sources into the Nix + store while filtering certain files. For instance, suppose that + you want to use the directory <filename>source-dir</filename> as + an input to a Nix expression, e.g. + +<programlisting> +stdenv.mkDerivation { + ... + src = ./source-dir; +} +</programlisting> + + However, if <filename>source-dir</filename> is a Subversion + working copy, then all those annoying <filename>.svn</filename> + subdirectories will also be copied to the store. Worse, the + contents of those directories may change a lot, causing lots of + spurious rebuilds. With <function>filterSource</function> you + can filter out the <filename>.svn</filename> directories: + +<programlisting> + src = builtins.filterSource + (path: type: type != "directory" || baseNameOf path != ".svn") + ./source-dir; +</programlisting> + + </para> + + <para>Thus, the first argument <replaceable>e1</replaceable> + must be a predicate function that is called for each regular + file, directory or symlink in the source tree + <replaceable>e2</replaceable>. If the function returns + <literal>true</literal>, the file is copied to the Nix store, + otherwise it is omitted. The function is called with two + arguments. The first is the full path of the file. The second + is a string that identifies the type of the file, which is + either <literal>"regular"</literal>, + <literal>"directory"</literal>, <literal>"symlink"</literal> or + <literal>"unknown"</literal> (for other kinds of files such as + device nodes or fifos — but note that those cannot be copied to + the Nix store, so if the predicate returns + <literal>true</literal> for them, the copy will fail).</para> + + </listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.fromJSON</function> <replaceable>e</replaceable></term> + + <listitem><para>Convert a JSON string to a Nix + value. For example, + +<programlisting> +builtins.fromJSON ''{"x": [1, 2, 3], "y": null}'' +</programlisting> + + returns the value <literal>{ x = [ 1 2 3 ]; y = null; + }</literal>. Floating point numbers are not + supported.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.getAttr</function> + <replaceable>s</replaceable> <replaceable>set</replaceable></term> + + <listitem><para><function>getAttr</function> returns the attribute + named <replaceable>s</replaceable> from + <replaceable>set</replaceable>. Evaluation aborts if the + attribute doesn’t exist. This is a dynamic version of the + <literal>.</literal> operator, since <replaceable>s</replaceable> + is an expression rather than an identifier.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.getEnv</function> + <replaceable>s</replaceable></term> + + <listitem><para><function>getEnv</function> returns the value of + the environment variable <replaceable>s</replaceable>, or an empty + string if the variable doesn’t exist. This function should be + used with care, as it can introduce all sorts of nasty environment + dependencies in your Nix expression.</para> + + <para><function>getEnv</function> is used in Nix Packages to + locate the file <filename>~/.nixpkgs/config.nix</filename>, which + contains user-local settings for Nix Packages. (That is, it does + a <literal>getEnv "HOME"</literal> to locate the user’s home + directory.)</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.hasAttr</function> + <replaceable>s</replaceable> <replaceable>set</replaceable></term> + + <listitem><para><function>hasAttr</function> returns + <literal>true</literal> if <replaceable>set</replaceable> has an + attribute named <replaceable>s</replaceable>, and + <literal>false</literal> otherwise. This is a dynamic version of + the <literal>?</literal> operator, since + <replaceable>s</replaceable> is an expression rather than an + identifier.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.hashString</function> + <replaceable>type</replaceable> <replaceable>s</replaceable></term> + + <listitem><para>Return a base-16 representation of the + cryptographic hash of string <replaceable>s</replaceable>. The + hash algorithm specified by <replaceable>type</replaceable> must + be one of <literal>"md5"</literal>, <literal>"sha1"</literal> or + <literal>"sha256"</literal>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.head</function> + <replaceable>list</replaceable></term> + + <listitem><para>Return the first element of a list; abort + evaluation if the argument isn’t a list or is an empty list. You + can test whether a list is empty by comparing it with + <literal>[]</literal>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>import</function> + <replaceable>path</replaceable></term> + + <listitem><para>Load, parse and return the Nix expression in the + file <replaceable>path</replaceable>. If <replaceable>path + </replaceable> is a directory, the file <filename>default.nix + </filename> in that directory is loaded. Evaluation aborts if the + file doesn’t exist or contains an incorrect Nix expression. + <function>import</function> implements Nix’s module system: you + can put any Nix expression (such as a set or a function) in a + separate file, and use it from Nix expressions in other + files.</para> + + <para>A Nix expression loaded by <function>import</function> must + not contain any <emphasis>free variables</emphasis> (identifiers + that are not defined in the Nix expression itself and are not + built-in). Therefore, it cannot refer to variables that are in + scope at the call site. For instance, if you have a calling + expression + +<programlisting> +rec { + x = 123; + y = import ./foo.nix; +}</programlisting> + + then the following <filename>foo.nix</filename> will give an + error: + +<programlisting> +x + 456</programlisting> + + since <varname>x</varname> is not in scope in + <filename>foo.nix</filename>. If you want <varname>x</varname> + to be available in <filename>foo.nix</filename>, you should pass + it as a function argument: + +<programlisting> +rec { + x = 123; + y = import ./foo.nix x; +}</programlisting> + + and + +<programlisting> +x: x + 456</programlisting> + + (The function argument doesn’t have to be called + <varname>x</varname> in <filename>foo.nix</filename>; any name + would work.)</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.intersectAttrs</function> + <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> + + <listitem><para>Return a set consisting of the attributes in the + set <replaceable>e2</replaceable> that also exist in the set + <replaceable>e1</replaceable>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.isAttrs</function> + <replaceable>e</replaceable></term> + + <listitem><para>Return <literal>true</literal> if + <replaceable>e</replaceable> evaluates to a set, and + <literal>false</literal> otherwise.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.isList</function> + <replaceable>e</replaceable></term> + + <listitem><para>Return <literal>true</literal> if + <replaceable>e</replaceable> evaluates to a list, and + <literal>false</literal> otherwise.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.isFunction</function> + <replaceable>e</replaceable></term> + + <listitem><para>Return <literal>true</literal> if + <replaceable>e</replaceable> evaluates to a function, and + <literal>false</literal> otherwise.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.isString</function> + <replaceable>e</replaceable></term> + + <listitem><para>Return <literal>true</literal> if + <replaceable>e</replaceable> evaluates to a string, and + <literal>false</literal> otherwise.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.isInt</function> + <replaceable>e</replaceable></term> + + <listitem><para>Return <literal>true</literal> if + <replaceable>e</replaceable> evaluates to an int, and + <literal>false</literal> otherwise.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.isBool</function> + <replaceable>e</replaceable></term> + + <listitem><para>Return <literal>true</literal> if + <replaceable>e</replaceable> evaluates to a bool, and + <literal>false</literal> otherwise.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>isNull</function> + <replaceable>e</replaceable></term> + + <listitem><para>Return <literal>true</literal> if + <replaceable>e</replaceable> evaluates to <literal>null</literal>, + and <literal>false</literal> otherwise.</para> + + <warning><para>This function is <emphasis>deprecated</emphasis>; + just write <literal>e == null</literal> instead.</para></warning> + + </listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.length</function> + <replaceable>e</replaceable></term> + + <listitem><para>Return the length of the list + <replaceable>e</replaceable>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.lessThan</function> + <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> + + <listitem><para>Return <literal>true</literal> if the integer + <replaceable>e1</replaceable> is less than the integer + <replaceable>e2</replaceable>, and <literal>false</literal> + otherwise. Evaluation aborts if either + <replaceable>e1</replaceable> or <replaceable>e2</replaceable> + does not evaluate to an integer.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.listToAttrs</function> + <replaceable>e</replaceable></term> + + <listitem><para>Construct a set from a list specifying the names + and values of each attribute. Each element of the list should be + a set consisting of a string-valued attribute + <varname>name</varname> specifying the name of the attribute, and + an attribute <varname>value</varname> specifying its value. + Example: + +<programlisting> +builtins.listToAttrs + [ { name = "foo"; value = 123; } + { name = "bar"; value = 456; } + ] +</programlisting> + + evaluates to + +<programlisting> +{ foo = 123; bar = 456; } +</programlisting> + + </para></listitem> + + </varlistentry> + + <varlistentry><term><function>map</function> + <replaceable>f</replaceable> <replaceable>list</replaceable></term> + + <listitem><para>Apply the function <replaceable>f</replaceable> to + each element in the list <replaceable>list</replaceable>. For + example, + +<programlisting> +map (x: "foo" + x) [ "bar" "bla" "abc" ]</programlisting> + + evaluates to <literal>[ "foobar" "foobla" "fooabc" + ]</literal>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.mul</function> + <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> + + <listitem><para>Return the product of the integers + <replaceable>e1</replaceable> and + <replaceable>e2</replaceable>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.parseDrvName</function> + <replaceable>s</replaceable></term> + + <listitem><para>Split the string <replaceable>s</replaceable> into + a package name and version. The package name is everything up to + but not including the first dash followed by a digit, and the + version is everything following that dash. The result is returned + in a set <literal>{ name, version }</literal>. Thus, + <literal>builtins.parseDrvName "nix-0.12pre12876"</literal> + returns <literal>{ name = "nix"; version = "0.12pre12876"; + }</literal>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.pathExists</function> + <replaceable>path</replaceable></term> + + <listitem><para>Return <literal>true</literal> if the path + <replaceable>path</replaceable> exists, and + <literal>false</literal> otherwise. One application of this + function is to conditionally include a Nix expression containing + user configuration: + +<programlisting> +let + fileName = builtins.getEnv "CONFIG_FILE"; + config = + if fileName != "" && builtins.pathExists (builtins.toPath fileName) + then import (builtins.toPath fileName) + else { someSetting = false; }; <lineannotation># default configuration</lineannotation> +in config.someSetting</programlisting> + + (Note that <envar>CONFIG_FILE</envar> must be an absolute path for + this to work.)</para></listitem> + + </varlistentry> + + + <!-- + <varlistentry><term><function>relativise</function></term> + + <listitem><para>TODO</para></listitem> + + </varlistentry> + --> + + + <varlistentry><term><function>builtins.readFile</function> + <replaceable>path</replaceable></term> + + <listitem><para>Return the contents of the file + <replaceable>path</replaceable> as a string.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>removeAttrs</function> + <replaceable>set</replaceable> <replaceable>list</replaceable></term> + + <listitem><para>Remove the attributes listed in + <replaceable>list</replaceable> from + <replaceable>set</replaceable>. The attributes don’t have to + exist in <replaceable>set</replaceable>. For instance, + +<screen> +removeAttrs { x = 1; y = 2; z = 3; } [ "a" "x" "z" ]</screen> + + evaluates to <literal>{ y = 2; }</literal>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.stringLength</function> + <replaceable>e</replaceable></term> + + <listitem><para>Return the length of the string + <replaceable>e</replaceable>. If <replaceable>e</replaceable> is + not a string, evaluation is aborted.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.sub</function> + <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> + + <listitem><para>Return the difference between the integers + <replaceable>e1</replaceable> and + <replaceable>e2</replaceable>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.substring</function> + <replaceable>start</replaceable> <replaceable>len</replaceable> + <replaceable>s</replaceable></term> + + <listitem><para>Return the substring of + <replaceable>s</replaceable> from character position + <replaceable>start</replaceable> (zero-based) up to but not + including <replaceable>start + len</replaceable>. If + <replaceable>start</replaceable> is greater than the length of the + string, an empty string is returned, and if <replaceable>start + + len</replaceable> lies beyond the end of the string, only the + substring up to the end of the string is returned. + <replaceable>start</replaceable> must be + non-negative.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.tail</function> + <replaceable>list</replaceable></term> + + <listitem><para>Return the second to last elements of a list; + abort evaluation if the argument isn’t a list or is an empty + list.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>throw</function> + <replaceable>s</replaceable></term> + + <listitem><para>Throw an error message + <replaceable>s</replaceable>. This usually aborts Nix expression + evaluation, but in <command>nix-env -qa</command> and other + commands that try to evaluate a set of derivations to get + information about those derivations, a derivation that throws an + error is silently skipped (which is not the case for + <function>abort</function>).</para></listitem> + + </varlistentry> + + + <varlistentry + xml:id='builtin-toFile'><term><function>builtins.toFile</function> + <replaceable>name</replaceable> <replaceable>s</replaceable></term> + + <listitem><para>Store the string <replaceable>s</replaceable> in a + file in the Nix store and return its path. The file has suffix + <replaceable>name</replaceable>. This file can be used as an + input to derivations. One application is to write builders + “inline”. For instance, the following Nix expression combines + <xref linkend='ex-hello-nix' /> and <xref + linkend='ex-hello-builder' /> into one file: + +<programlisting> +{ stdenv, fetchurl, perl }: + +stdenv.mkDerivation { + name = "hello-2.1.1"; + + builder = builtins.toFile "builder.sh" " + source $stdenv/setup + + PATH=$perl/bin:$PATH + + tar xvfz $src + cd hello-* + ./configure --prefix=$out + make + make install + "; + + src = fetchurl { + url = http://nix.cs.uu.nl/dist/tarballs/hello-2.1.1.tar.gz; + md5 = "70c9ccf9fac07f762c24f2df2290784d"; + }; + inherit perl; +}</programlisting> + + </para> + + <para>It is even possible for one file to refer to another, e.g., + +<programlisting> + builder = let + configFile = builtins.toFile "foo.conf" " + # This is some dummy configuration file. + <replaceable>...</replaceable> + "; + in builtins.toFile "builder.sh" " + source $stdenv/setup + <replaceable>...</replaceable> + cp ${configFile} $out/etc/foo.conf + ";</programlisting> + + Note that <literal>${configFile}</literal> is an antiquotation + (see <xref linkend='ssec-values' />), so the result of the + expression <literal>configFile</literal> (i.e., a path like + <filename>/nix/store/m7p7jfny445k...-foo.conf</filename>) will be + spliced into the resulting string.</para> + + <para>It is however <emphasis>not</emphasis> allowed to have files + mutually referring to each other, like so: + +<programlisting> +let + foo = builtins.toFile "foo" "...${bar}..."; + bar = builtins.toFile "bar" "...${foo}..."; +in foo</programlisting> + + This is not allowed because it would cause a cyclic dependency in + the computation of the cryptographic hashes for + <varname>foo</varname> and <varname>bar</varname>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.toJSON</function> <replaceable>e</replaceable></term> + + <listitem><para>Return a string containing a JSON representation + of <replaceable>e</replaceable>. Strings, integers, booleans, + nulls and lists are mapped to their JSON equivalents. Sets + (except derivations) are represented as objects. Derivations are + translated to a JSON string containing the derivation’s output + path. Paths are copied to the store and represented as a JSON + string of the resulting store path.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.toPath</function> <replaceable>s</replaceable></term> + + <listitem><para>Convert the string value + <replaceable>s</replaceable> into a path value. The string + <replaceable>s</replaceable> must represent an absolute path + (i.e., must start with <literal>/</literal>). The path need not + exist. The resulting path is canonicalised, e.g., + <literal>builtins.toPath "//foo/xyzzy/../bar/"</literal> returns + <literal>/foo/bar</literal>.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>toString</function> <replaceable>e</replaceable></term> + + <listitem><para>Convert the expression + <replaceable>e</replaceable> to a string. + <replaceable>e</replaceable> can be a string (in which case + <function>toString</function> is a no-op) or a path (e.g., + <literal>toString /foo/bar</literal> yields + <literal>"/foo/bar"</literal>.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id='builtin-toXML'><term><function>builtins.toXML</function> <replaceable>e</replaceable></term> + + <listitem><para>Return a string containing an XML representation + of <replaceable>e</replaceable>. The main application for + <function>toXML</function> is to communicate information with the + builder in a more structured format than plain environment + variables.</para> + + <!-- TODO: more formally describe the schema of the XML + representation --> + + <para><xref linkend='ex-toxml' /> shows an example where this is + the case. The builder is supposed to generate the configuration + file for a <link xlink:href='http://jetty.mortbay.org/'>Jetty + servlet container</link>. A servlet container contains a number + of servlets (<filename>*.war</filename> files) each exported under + a specific URI prefix. So the servlet configuration is a list of + sets containing the <varname>path</varname> and + <varname>war</varname> of the servlet (<xref + linkend='ex-toxml-co-servlets' />). This kind of information is + difficult to communicate with the normal method of passing + information through an environment variable, which just + concatenates everything together into a string (which might just + work in this case, but wouldn’t work if fields are optional or + contain lists themselves). Instead the Nix expression is + converted to an XML representation with + <function>toXML</function>, which is unambiguous and can easily be + processed with the appropriate tools. For instance, in the + example an XSLT stylesheet (<xref linkend='ex-toxml-co-stylesheet' + />) is applied to it (<xref linkend='ex-toxml-co-apply' />) to + generate the XML configuration file for the Jetty server. The XML + representation produced from <xref linkend='ex-toxml-co-servlets' + /> by <function>toXML</function> is shown in <xref + linkend='ex-toxml-result' />.</para> + + <para>Note that <xref linkend='ex-toxml' /> uses the <function + linkend='builtin-toFile'>toFile</function> built-in to write the + builder and the stylesheet “inline” in the Nix expression. The + path of the stylesheet is spliced into the builder at + <literal>xsltproc ${stylesheet} + <replaceable>...</replaceable></literal>.</para> + + <example xml:id='ex-toxml'><title>Passing information to a builder + using <function>toXML</function></title> + +<programlisting><![CDATA[ +{ stdenv, fetchurl, libxslt, jira, uberwiki }: + +stdenv.mkDerivation (rec { + name = "web-server"; + + buildInputs = [ libxslt ]; + + builder = builtins.toFile "builder.sh" " + source $stdenv/setup + mkdir $out + echo $servlets | xsltproc ${stylesheet} - > $out/server-conf.xml]]> <co xml:id='ex-toxml-co-apply' /> <![CDATA[ + "; + + stylesheet = builtins.toFile "stylesheet.xsl"]]> <co xml:id='ex-toxml-co-stylesheet' /> <![CDATA[ + "<?xml version='1.0' encoding='UTF-8'?> + <xsl:stylesheet xmlns:xsl='http://www.w3.org/1999/XSL/Transform' version='1.0'> + <xsl:template match='/'> + <Configure> + <xsl:for-each select='/expr/list/attrs'> + <Call name='addWebApplication'> + <Arg><xsl:value-of select=\"attr[@name = 'path']/string/@value\" /></Arg> + <Arg><xsl:value-of select=\"attr[@name = 'war']/path/@value\" /></Arg> + </Call> + </xsl:for-each> + </Configure> + </xsl:template> + </xsl:stylesheet> + "; + + servlets = builtins.toXML []]> <co xml:id='ex-toxml-co-servlets' /> <![CDATA[ + { path = "/bugtracker"; war = jira + "/lib/atlassian-jira.war"; } + { path = "/wiki"; war = uberwiki + "/uberwiki.war"; } + ]; +})]]></programlisting> + + </example> + + <example xml:id='ex-toxml-result'><title>XML representation produced by + <function>toXML</function></title> + +<programlisting><![CDATA[<?xml version='1.0' encoding='utf-8'?> +<expr> + <list> + <attrs> + <attr name="path"> + <string value="/bugtracker" /> + </attr> + <attr name="war"> + <path value="/nix/store/d1jh9pasa7k2...-jira/lib/atlassian-jira.war" /> + </attr> + </attrs> + <attrs> + <attr name="path"> + <string value="/wiki" /> + </attr> + <attr name="war"> + <path value="/nix/store/y6423b1yi4sx...-uberwiki/uberwiki.war" /> + </attr> + </attrs> + </list> +</expr>]]></programlisting> + + </example> + + </listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.trace</function> + <replaceable>e1</replaceable> <replaceable>e2</replaceable></term> + + <listitem><para>Evaluate <replaceable>e1</replaceable> and print its + abstract syntax representation on standard error. Then return + <replaceable>e2</replaceable>. This function is useful for + debugging.</para></listitem> + + </varlistentry> + + + <varlistentry><term><function>builtins.typeOf</function> + <replaceable>e</replaceable></term> + + <listitem><para>Return a string representing the type of the value + <replaceable>e</replaceable>, namely <literal>"int"</literal>, + <literal>"bool"</literal>, <literal>"string"</literal>, + <literal>"path"</literal>, <literal>"null"</literal>, + <literal>"set"</literal>, <literal>"list"</literal> or + <literal>"lambda"</literal>.</para></listitem> + + </varlistentry> + + +</variablelist> + + +</section> |