diff options
Diffstat (limited to 'configs/shared/emacs/.emacs.d/elpa/magit-20180719.1904/magit.info-2')
| -rw-r--r-- | configs/shared/emacs/.emacs.d/elpa/magit-20180719.1904/magit.info-2 | 2600 |
1 files changed, 2600 insertions, 0 deletions
diff --git a/configs/shared/emacs/.emacs.d/elpa/magit-20180719.1904/magit.info-2 b/configs/shared/emacs/.emacs.d/elpa/magit-20180719.1904/magit.info-2 new file mode 100644 index 000000000000..4db03f0304a5 --- /dev/null +++ b/configs/shared/emacs/.emacs.d/elpa/magit-20180719.1904/magit.info-2 @@ -0,0 +1,2600 @@ +This is magit.info, produced by makeinfo version 6.1 from magit.texi. + + Copyright (C) 2015-2018 Jonas Bernoulli <jonas@bernoul.li> + + You can redistribute this document and/or modify it under the terms + of the GNU General Public License as published by the Free Software + Foundation, either version 3 of the License, or (at your option) + any later version. + + This document is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. +INFO-DIR-SECTION Emacs +START-INFO-DIR-ENTRY +* Magit: (magit). Using Git from Emacs with Magit. +END-INFO-DIR-ENTRY + + +File: magit.info, Node: Microsoft Windows Performance, Next: MacOS Performance, Up: Performance + +Microsoft Windows Performance +............................. + +In order to update the status buffer, ‘git’ has to be run a few dozen +times. That is problematic on Microsoft Windows, because that operating +system is exceptionally slow at starting processes. Sadly this is an +issue that can only be fixed by Microsoft itself, and they don’t appear +to be particularly interested in doing so. + + Beside the subprocess issue, there are also other Windows-specific +performance issues. Some of these have workarounds. The maintainers of +"Git for Windows" try to improve performance on Windows. Always use the +latest release in order to benefit from the latest performance tweaks. +Magit too tries to work around some Windows-specific issues. + + According to some sources, setting the following Git variables can +also help. + + git config --global core.preloadindex true # default since v2.1 + git config --global core.fscache true # default since v2.8 + git config --global gc.auto 256 + + You should also check whether an anti-virus program is affecting +performance. + + +File: magit.info, Node: MacOS Performance, Prev: Microsoft Windows Performance, Up: Performance + +MacOS Performance +................. + +On macOS Emacs currently creates child processes using ‘fork’. It +appears that this also copies GUI resources. The result is that forking +takes about 30 times as long on Darwin than on Linux. And because Magit +starts many ‘git’ processes even when doing simple things, that makes +quite a difference. + + On the ‘master’ branch Emacs now uses ‘vfork’ when possible, like +this was already done on Linux, and now child creation only takes about +twice as long on Darwin. See (1) for more information. + + Nobody knows when the changes on the ‘master’ branch will be released +as ‘26.1’, but it is still a long way off. You might want to get your +hands on this change before then. The easiest way to get a patched +Emacs is to install the ‘emacs-plus’ formula (2) using ‘homebrew’. The +change has been backported, so you get it not only when using ‘--HEAD’, +but also when using ‘--devel’ or when installing the latest release (by +not using a version argument). + + Alternatively you can apply the backport (3) manually. + + ---------- Footnotes ---------- + + (1) +<https://lists.gnu.org/archive/html/bug-gnu-emacs/2017-04/msg00201.html> + + (2) <https://github.com/d12frosted/homebrew-emacs-plus> + + (3) +<https://gist.githubusercontent.com/aaronjensen/f45894ddf431ecbff78b1bcf533d3e6b/raw/6a5cd7f57341aba673234348d8b0d2e776f86719/Emacs-25-OS-X-use-vfork.patch> + + +File: magit.info, Node: Plumbing, Next: FAQ, Prev: Customizing, Up: Top + +10 Plumbing +*********** + +The following sections describe how to use several of Magit’s core +abstractions to extend Magit itself or implement a separate extension. + + A few of the low-level features used by Magit have been factored out +into separate libraries/packages, so that they can be used by other +packages, without having to depend on Magit. These libraries are +described in separate manuals, see *note (with-editor)Top:: and *note +(magit-popup)Top::. + + If you are trying to find an unused key that you can bind to a +command provided by your own Magit extension, then checkout +<https://github.com/magit/magit/wiki/Plugin-Dispatch-Key-Registry>. + +* Menu: + +* Calling Git:: +* Section Plumbing:: +* Refreshing Buffers:: +* Conventions:: + + +File: magit.info, Node: Calling Git, Next: Section Plumbing, Up: Plumbing + +10.1 Calling Git +================ + +Magit provides many specialized functions for calling Git. All of these +functions are defined in either ‘magit-git.el’ or ‘magit-process.el’ and +have one of the prefixes ‘magit-run-’, ‘magit-call-’, ‘magit-start-’, or +‘magit-git-’ (which is also used for other things). + + All of these functions accept an indefinite number of arguments, +which are strings that specify command line arguments for Git (or in +some cases an arbitrary executable). These arguments are flattened +before being passed on to the executable; so instead of strings they can +also be lists of strings and arguments that are ‘nil’ are silently +dropped. Some of these functions also require a single mandatory +argument before these command line arguments. + + Roughly speaking, these functions run Git either to get some value or +for side-effects. The functions that return a value are useful to +collect the information necessary to populate a Magit buffer, while the +others are used to implement Magit commands. + + The functions in the value-only group always run synchronously, and +they never trigger a refresh. The function in the side-effect group can +be further divided into subgroups depending on whether they run Git +synchronously or asynchronously, and depending on whether they trigger a +refresh when the executable has finished. + +* Menu: + +* Getting a Value from Git:: +* Calling Git for Effect:: + + +File: magit.info, Node: Getting a Value from Git, Next: Calling Git for Effect, Up: Calling Git + +10.1.1 Getting a Value from Git +------------------------------- + +These functions run Git in order to get a value, an exit status, or +output. Of course you could also use them to run Git commands that have +side-effects, but that should be avoided. + + -- Function: magit-git-exit-code &rest args + + Executes git with ARGS and returns its exit code. + + -- Function: magit-git-success &rest args + + Executes git with ARGS and returns ‘t’ if the exit code is ‘0’, + ‘nil’ otherwise. + + -- Function: magit-git-failure &rest args + + Executes git with ARGS and returns ‘t’ if the exit code is ‘1’, + ‘nil’ otherwise. + + -- Function: magit-git-true &rest args + + Executes git with ARGS and returns ‘t’ if the first line printed by + git is the string "true", ‘nil’ otherwise. + + -- Function: magit-git-false &rest args + + Executes git with ARGS and returns ‘t’ if the first line printed by + git is the string "false", ‘nil’ otherwise. + + -- Function: magit-git-insert &rest args + + Executes git with ARGS and inserts its output at point. + + -- Function: magit-git-string &rest args + + Executes git with ARGS and returns the first line of its output. + If there is no output or if it begins with a newline character, + then this returns ‘nil’. + + -- Function: magit-git-lines &rest args + + Executes git with ARGS and returns its output as a list of lines. + Empty lines anywhere in the output are omitted. + + -- Function: magit-git-items &rest args + + Executes git with ARGS and returns its null-separated output as a + list. Empty items anywhere in the output are omitted. + + If the value of option ‘magit-git-debug’ is non-nil and git exits + with a non-zero exit status, then warn about that in the echo area + and add a section containing git’s standard error in the current + repository’s process buffer. + + If an error occurs when using one of the above functions, then that +is usually due to a bug, i.e. using an argument which is not actually +supported. Such errors are usually not reported, but when they occur we +need to be able to debug them. + + -- User Option: magit-git-debug + + Whether to report errors that occur when using ‘magit-git-insert’, + ‘magit-git-string’, ‘magit-git-lines’, or ‘magit-git-items’. This + does not actually raise an error. Instead a message is shown in + the echo area, and git’s standard error is insert into a new + section in the current repository’s process buffer. + + -- Function: magit-git-str &rest args + + This is a variant of ‘magit-git-string’ that ignores the option + ‘magit-git-debug’. It is mainly intended to be used while handling + errors in functions that do respect that option. Using such a + function while handing an error could cause yet another error and + therefore lead to an infinite recursion. You probably won’t ever + need to use this function. + + +File: magit.info, Node: Calling Git for Effect, Prev: Getting a Value from Git, Up: Calling Git + +10.1.2 Calling Git for Effect +----------------------------- + +These functions are used to run git to produce some effect. Most Magit +commands that actually run git do so by using such a function. + + Because we do not need to consume git’s output when using these +functions, their output is instead logged into a per-repository buffer, +which can be shown using ‘$’ from a Magit buffer or ‘M-x magit-process’ +elsewhere. + + These functions can have an effect in two distinct ways. Firstly, +running git may change something, i.e. create or push a new commit. +Secondly, that change may require that Magit buffers are refreshed to +reflect the changed state of the repository. But refreshing isn’t +always desirable, so only some of these functions do perform such a +refresh after git has returned. + + Sometimes it is useful to run git asynchronously. For example, when +the user has just initiated a push, then there is no reason to make her +wait until that has completed. In other cases it makes sense to wait +for git to complete before letting the user do something else. For +example after staging a change it is useful to wait until after the +refresh because that also automatically moves to the next change. + + -- Function: magit-call-git &rest args + + Calls git synchronously with ARGS. + + -- Function: magit-call-process program &rest args + + Calls PROGRAM synchronously with ARGS. + + -- Function: magit-run-git &rest args + + Calls git synchronously with ARGS and then refreshes. + + -- Function: magit-run-git-with-input input &rest args + + Calls git synchronously with ARGS and sends it INPUT on standard + input. + + INPUT should be a buffer or the name of an existing buffer. The + content of that buffer is used as the process’ standard input. + After the process returns a refresh is performed. + + As a special case, INPUT may also be nil. In that case the content + of the current buffer is used as standard input and *no* refresh is + performed. + + This function actually runs git asynchronously. But then it waits + for the process to return, so the function itself is synchronous. + + -- Function: magit-run-git-with-logfile file &rest args + + Calls git synchronously with ARGS. The process’ output is saved in + FILE. This is rarely useful and so this function might be removed + in the future. + + This function actually runs git asynchronously. But then it waits + for the process to return, so the function itself is synchronous. + + -- Function: magit-git &rest args + + Calls git synchronously with ARGS for side-effects only. This + function does not refresh the buffer. + + -- Function: magit-git-wash washer &rest args + + Execute Git with ARGS, inserting washed output at point. Actually + first insert the raw output at point. If there is no output call + ‘magit-cancel-section’. Otherwise temporarily narrow the buffer to + the inserted text, move to its beginning, and then call function + WASHER with ARGS as its sole argument. + + And now for the asynchronous variants. + + -- Function: magit-run-git-async &rest args + + Start Git, prepare for refresh, and return the process object. + ARGS is flattened and then used as arguments to Git. + + Display the command line arguments in the echo area. + + After Git returns some buffers are refreshed: the buffer that was + current when this function was called (if it is a Magit buffer and + still alive), as well as the respective Magit status buffer. + Unmodified buffers visiting files that are tracked in the current + repository are reverted if ‘magit-revert-buffers’ is non-nil. + + -- Function: magit-run-git-with-editor &rest args + + Export GIT_EDITOR and start Git. Also prepare for refresh and + return the process object. ARGS is flattened and then used as + arguments to Git. + + Display the command line arguments in the echo area. + + After Git returns some buffers are refreshed: the buffer that was + current when this function was called (if it is a Magit buffer and + still alive), as well as the respective Magit status buffer. + + -- Function: magit-start-git &rest args + + Start Git, prepare for refresh, and return the process object. + + If INPUT is non-nil, it has to be a buffer or the name of an + existing buffer. The buffer content becomes the processes standard + input. + + Option ‘magit-git-executable’ specifies the Git executable and + option ‘magit-git-global-arguments’ specifies constant arguments. + The remaining arguments ARGS specify arguments to Git. They are + flattened before use. + + After Git returns, some buffers are refreshed: the buffer that was + current when this function was called (if it is a Magit buffer and + still alive), as well as the respective Magit status buffer. + Unmodified buffers visiting files that are tracked in the current + repository are reverted if ‘magit-revert-buffers’ is non-nil. + + -- Function: magit-start-process &rest args + + Start PROGRAM, prepare for refresh, and return the process object. + + If optional argument INPUT is non-nil, it has to be a buffer or the + name of an existing buffer. The buffer content becomes the + processes standard input. + + The process is started using ‘start-file-process’ and then setup to + use the sentinel ‘magit-process-sentinel’ and the filter + ‘magit-process-filter’. Information required by these functions is + stored in the process object. When this function returns the + process has not started to run yet so it is possible to override + the sentinel and filter. + + After the process returns, ‘magit-process-sentinel’ refreshes the + buffer that was current when ‘magit-start-process’ was called (if + it is a Magit buffer and still alive), as well as the respective + Magit status buffer. Unmodified buffers visiting files that are + tracked in the current repository are reverted if + ‘magit-revert-buffers’ is non-nil. + + -- Variable: magit-this-process + + The child process which is about to start. This can be used to + change the filter and sentinel. + + -- Variable: magit-process-raise-error + + When this is non-nil, then ‘magit-process-sentinel’ raises an error + if git exits with a non-zero exit status. For debugging purposes. + + +File: magit.info, Node: Section Plumbing, Next: Refreshing Buffers, Prev: Calling Git, Up: Plumbing + +10.2 Section Plumbing +===================== + +* Menu: + +* Creating Sections:: +* Section Selection:: +* Matching Sections:: + + +File: magit.info, Node: Creating Sections, Next: Section Selection, Up: Section Plumbing + +10.2.1 Creating Sections +------------------------ + + -- Macro: magit-insert-section &rest args + + Insert a section at point. + + TYPE is the section type, a symbol. Many commands that act on the + current section behave differently depending on that type. Also if + a variable ‘magit-TYPE-section-map’ exists, then use that as the + text-property ‘keymap’ of all text belonging to the section (but + this may be overwritten in subsections). TYPE can also have the + form ‘(eval FORM)’ in which case FORM is evaluated at runtime. + + Optional VALUE is the value of the section, usually a string that + is required when acting on the section. + + When optional HIDE is non-nil collapse the section body by default, + i.e. when first creating the section, but not when refreshing the + buffer. Otherwise, expand it by default. This can be overwritten + using ‘magit-section-set-visibility-hook’. When a section is + recreated during a refresh, then the visibility of predecessor is + inherited and HIDE is ignored (but the hook is still honored). + + BODY is any number of forms that actually insert the section’s + heading and body. Optional NAME, if specified, has to be a symbol, + which is then bound to the struct of the section being inserted. + + Before BODY is evaluated the ‘start’ of the section object is set + to the value of ‘point’ and after BODY was evaluated its ‘end’ is + set to the new value of ‘point’; BODY is responsible for moving + ‘point’ forward. + + If it turns out inside BODY that the section is empty, then + ‘magit-cancel-section’ can be used to abort and remove all traces + of the partially inserted section. This can happen when creating a + section by washing Git’s output and Git didn’t actually output + anything this time around. + + -- Function: magit-insert-heading &rest args + + Insert the heading for the section currently being inserted. + + This function should only be used inside ‘magit-insert-section’. + + When called without any arguments, then just set the ‘content’ slot + of the object representing the section being inserted to a marker + at ‘point’. The section should only contain a single line when + this function is used like this. + + When called with arguments ARGS, which have to be strings, then + insert those strings at point. The section should not contain any + text before this happens and afterwards it should again only + contain a single line. If the ‘face’ property is set anywhere + inside any of these strings, then insert all of them unchanged. + Otherwise use the ‘magit-section-heading’ face for all inserted + text. + + The ‘content’ property of the section struct is the end of the + heading (which lasts from ‘start’ to ‘content’) and the beginning + of the body (which lasts from ‘content’ to ‘end’). If the value of + ‘content’ is nil, then the section has no heading and its body + cannot be collapsed. If a section does have a heading then its + height must be exactly one line, including a trailing newline + character. This isn’t enforced; you are responsible for getting it + right. The only exception is that this function does insert a + newline character if necessary. + + -- Function: magit-cancel-section + + Cancel the section currently being inserted. This exits the + innermost call to ‘magit-insert-section’ and removes all traces of + what has already happened inside that call. + + -- Function: magit-define-section-jumper sym title &optional value + + Define an interactive function to go to section SYM. TITLE is the + displayed title of the section. + + +File: magit.info, Node: Section Selection, Next: Matching Sections, Prev: Creating Sections, Up: Section Plumbing + +10.2.2 Section Selection +------------------------ + + -- Function: magit-current-section + + Return the section at point. + + -- Function: magit-region-sections + + Return a list of the selected sections. + + When the region is active and constitutes a valid section + selection, then return a list of all selected sections. This is + the case when the region begins in the heading of a section and + ends in the heading of a sibling of that first section. When the + selection is not valid then return nil. Most commands that can act + on the selected sections, then instead just act on the current + section, the one point is in. + + When the region looks like it would in any other buffer then the + selection is invalid. When the selection is valid then the region + uses the ‘magit-section-highlight’. This does not apply to diffs + where things get a bit more complicated, but even here if the + region looks like it usually does, then that’s not a valid + selection as far as this function is concerned. + + -- Function: magit-region-values &rest types + + Return a list of the values of the selected sections. + + Also see ‘magit-region-sections’ whose doc-string explains when a + region is a valid section selection. If the region is not active + or is not a valid section selection, then return nil. If optional + TYPES is non-nil then the selection not only has to be valid; the + types of all selected sections additionally have to match one of + TYPES, or nil is returned. + + +File: magit.info, Node: Matching Sections, Prev: Section Selection, Up: Section Plumbing + +10.2.3 Matching Sections +------------------------ + +‘M-x magit-describe-section’ (‘magit-describe-section’) + + Show information about the section at point. This command is + intended for debugging purposes. + + -- Function: magit-section-ident + + Return an unique identifier for SECTION. The return value has the + form ‘((TYPE . VALUE)...)’. + + -- Function: magit-get-section + + Return the section identified by IDENT. IDENT has to be a list as + returned by ‘magit-section-ident’. + + -- Function: magit-section-match condition &optional section + + Return ‘t’ if SECTION matches CONDITION. SECTION defaults to the + section at point. If SECTION is not specified and there also is no + section at point, then return ‘nil’. + + CONDITION can take the following forms: + • ‘(CONDITION...)’ + + matches if any of the CONDITIONs matches. + + • ‘[TYPE...]’ + + matches if the first TYPE matches the type of the section, the + second matches that of its parent, and so on. + + • ‘[* TYPE...]’ + + matches sections that match [TYPE...] and also recursively all + their child sections. + + • ‘TYPE’ + + matches sections of TYPE regardless of the types of the parent + sections. + + Each TYPE is a symbol. Note that it is not necessary to specify + all TYPEs up to the root section as printed by + ‘magit-describe-type’, unless of course you want to be that + precise. + + -- Function: magit-section-when condition &rest body + + If the section at point matches CONDITION evaluate BODY. + + If the section matches, then evaluate BODY forms sequentially with + ‘it’ bound to the section and return the value of the last form. + If there are no BODY forms, then return the value of the section. + If the section does not match or if there is no section at point + then return nil. + + See ‘magit-section-match’ for the forms CONDITION can take. + + -- Function: magit-section-case &rest clauses + + Choose among clauses on the type of the section at point. + + Each clause looks like (CONDITION BODY...). The type of the + section is compared against each CONDITION; the BODY forms of the + first match are evaluated sequentially and the value of the last + form is returned. Inside BODY the symbol ‘it’ is bound to the + section at point. If no clause succeeds or if there is no section + at point return nil. + + See ‘magit-section-match’ for the forms CONDITION can take. + Additionally a CONDITION of t is allowed in the final clause and + matches if no other CONDITION match, even if there is no section at + point. + + -- Variable: magit-root-section + + The root section in the current buffer. All other sections are + descendants of this section. The value of this variable is set by + ‘magit-insert-section’ and you should never modify it. + + For diff related sections a few additional tools exist. + + -- Function: magit-diff-type &optional section + + Return the diff type of SECTION. + + The returned type is one of the symbols ‘staged’, ‘unstaged’, + ‘committed’, or ‘undefined’. This type serves a similar purpose as + the general type common to all sections (which is stored in the + ‘type’ slot of the corresponding ‘magit-section’ struct) but takes + additional information into account. When the SECTION isn’t + related to diffs and the buffer containing it also isn’t a + diff-only buffer, then return nil. + + Currently the type can also be one of ‘tracked’ and ‘untracked’, + but these values are not handled explicitly in every place they + should be. A possible fix could be to just return nil here. + + The section has to be a ‘diff’ or ‘hunk’ section, or a section + whose children are of type ‘diff’. If optional SECTION is nil, + return the diff type for the current section. In buffers whose + major mode is ‘magit-diff-mode’ SECTION is ignored and the type is + determined using other means. In ‘magit-revision-mode’ buffers the + type is always ‘committed’. + + -- Function: magit-diff-scope &optional section strict + + Return the diff scope of SECTION or the selected section(s). + + A diff’s "scope" describes what part of a diff is selected, it is a + symbol, one of ‘region’, ‘hunk’, ‘hunks’, ‘file’, ‘files’, or + ‘list’. Do not confuse this with the diff "type", as returned by + ‘magit-diff-type’. + + If optional SECTION is non-nil, then return the scope of that, + ignoring the sections selected by the region. Otherwise return the + scope of the current section, or if the region is active and + selects a valid group of diff related sections, the type of these + sections, i.e. ‘hunks’ or ‘files’. If SECTION (or if the current + section that is nil) is a ‘hunk’ section and the region starts and + ends inside the body of a that section, then the type is ‘region’. + + If optional STRICT is non-nil then return nil if the diff type of + the section at point is ‘untracked’ or the section at point is not + actually a ‘diff’ but a ‘diffstat’ section. + + +File: magit.info, Node: Refreshing Buffers, Next: Conventions, Prev: Section Plumbing, Up: Plumbing + +10.3 Refreshing Buffers +======================= + +All commands that create a new Magit buffer or change what is being +displayed in an existing buffer do so by calling ‘magit-mode-setup’. +Among other things, that function sets the buffer local values of +‘default-directory’ (to the top-level of the repository), +‘magit-refresh-function’, and ‘magit-refresh-args’. + + Buffers are refreshed by calling the function that is the local value +of ‘magit-refresh-function’ (a function named ‘magit-*-refresh-buffer’, +where ‘*’ may be something like ‘diff’) with the value of +‘magit-refresh-args’ as arguments. + + -- Macro: magit-mode-setup buffer switch-func mode refresh-func + &optional refresh-args + + This function displays and selects BUFFER, turns on MODE, and + refreshes a first time. + + This function displays and optionally selects BUFFER by calling + ‘magit-mode-display-buffer’ with BUFFER, MODE and SWITCH-FUNC as + arguments. Then it sets the local value of + ‘magit-refresh-function’ to REFRESH-FUNC and that of + ‘magit-refresh-args’ to REFRESH-ARGS. Finally it creates the + buffer content by calling REFRESH-FUNC with REFRESH-ARGS as + arguments. + + All arguments are evaluated before switching to BUFFER. + + -- Function: magit-mode-display-buffer buffer mode &optional + switch-function + + This function display BUFFER in some window and select it. BUFFER + may be a buffer or a string, the name of a buffer. The buffer is + returned. + + Unless BUFFER is already displayed in the selected frame, store the + previous window configuration as a buffer local value, so that it + can later be restored by ‘magit-mode-bury-buffer’. + + The buffer is displayed and selected using SWITCH-FUNCTION. If + that is ‘nil’ then ‘pop-to-buffer’ is used if the current buffer’s + major mode derives from ‘magit-mode’. Otherwise ‘switch-to-buffer’ + is used. + + -- Variable: magit-refresh-function + + The value of this buffer-local variable is the function used to + refresh the current buffer. It is called with ‘magit-refresh-args’ + as arguments. + + -- Variable: magit-refresh-args + + The list of arguments used by ‘magit-refresh-function’ to refresh + the current buffer. ‘magit-refresh-function’ is called with these + arguments. + + The value is usually set using ‘magit-mode-setup’, but in some + cases it’s also useful to provide commands which can change the + value. For example, the ‘magit-diff-refresh-popup’ can be used to + change any of the arguments used to display the diff, without + having to specify again which differences should be shown. + ‘magit-diff-more-context’, ‘magit-diff-less-context’, and + ‘magit-diff-default-context’ change just the ‘-U<N>’ argument. In + both case this is done by changing the value of this variable and + then calling this ‘magit-refresh-function’. + + +File: magit.info, Node: Conventions, Prev: Refreshing Buffers, Up: Plumbing + +10.4 Conventions +================ + +Also see *note Completion and Confirmation::. + +* Menu: + +* Theming Faces:: + + +File: magit.info, Node: Theming Faces, Up: Conventions + +10.4.1 Theming Faces +-------------------- + +The default theme uses blue for local branches, green for remote +branches, and goldenrod (brownish yellow) for tags. When creating a new +theme, you should probably follow that example. If your theme already +uses other colors, then stick to that. + + In older releases these reference faces used to have a background +color and a box around them. The basic default faces no longer do so, +to make Magit buffers much less noisy, and you should follow that +example at least with regards to boxes. (Boxes were used in the past to +work around a conflict between the highlighting overlay and text +property backgrounds. That’s no longer necessary because highlighting +no longer causes other background colors to disappear.) Alternatively +you can keep the background color and/or box, but then have to take +special care to adjust ‘magit-branch-current’ accordingly. By default +it looks mostly like ‘magit-branch-local’, but with a box (by default +the former is the only face that uses a box, exactly so that it sticks +out). If the former also uses a box, then you have to make sure that it +differs in some other way from the latter. + + The most difficult faces to theme are those related to diffs, +headings, highlighting, and the region. There are faces that fall into +all four groups - expect to spend some time getting this right. + + The ‘region’ face in the default theme, in both the light and dark +variants, as well as in many other themes, distributed with Emacs or by +third-parties, is very ugly. It is common to use a background color +that really sticks out, which is ugly but if that were the only problem +then it would be acceptable. Unfortunately many themes also set the +foreground color, which ensures that all text within the region is +readable. Without doing that there might be cases where some foreground +color is too close to the region background color to still be readable. +But it also means that text within the region loses all syntax +highlighting. + + I consider the work that went into getting the ‘region’ face right to +be a good indicator for the general quality of a theme. My +recommendation for the ‘region’ face is this: use a background color +slightly different from the background color of the ‘default’ face, and +do not set the foreground color at all. So for a light theme you might +use a light (possibly tinted) gray as the background color of ‘default’ +and a somewhat darker gray for the background of ‘region’. That should +usually be enough to not collide with the foreground color of any other +face. But if some other faces also set a light gray as background +color, then you should also make sure it doesn’t collide with those (in +some cases it might be acceptable though). + + Magit only uses the ‘region’ face when the region is "invalid" by its +own definition. In a Magit buffer the region is used to either select +multiple sibling sections, so that commands which support it act on all +of these sections instead of just the current section, or to select +lines within a single hunk section. In all other cases, the section is +considered invalid and Magit won’t act on it. But such invalid sections +happen, either because the user has not moved point enough yet to make +it valid or because she wants to use a non-magit command to act on the +region, e.g. ‘kill-region’. + + So using the regular ‘region’ face for invalid sections is a feature. +It tells the user that Magit won’t be able to act on it. It’s +acceptable if that face looks a bit odd and even (but less so) if it +collides with the background colors of section headings and other things +that have a background color. + + Magit highlights the current section. If a section has subsections, +then all of them are highlighted. This is done using faces that have +"highlight" in their names. For most sections, +‘magit-section-highlight’ is used for both the body and the heading. +Like the ‘region’ face, it should only set the background color to +something similar to that of ‘default’. The highlight background color +must be different from both the ‘region’ background color and the +‘default’ background color. + + For diff related sections Magit uses various faces to highlight +different parts of the selected section(s). Note that hunk headings, +unlike all other section headings, by default have a background color, +because it is useful to have very visible separators between hunks. +That face ‘magit-diff-hunk-heading’, should be different from both +‘magit-diff-hunk-heading-highlight’ and ‘magit-section-highlight’, as +well as from ‘magit-diff-context’ and ‘magit-diff-context-highlight’. +By default we do that by changing the foreground color. Changing the +background color would lead to complications, and there are already +enough we cannot get around. (Also note that it is generally a good +idea for section headings to always be bold, but only for sections that +have subsections). + + When there is a valid region selecting diff-related sibling sections, +i.e. multiple files or hunks, then the bodies of all these sections use +the respective highlight faces, but additionally the headings instead +use one of the faces ‘magit-diff-file-heading-selection’ or +‘magit-diff-hunk-heading-selection’. These faces have to be different +from the regular highlight variants to provide explicit visual +indication that the region is active. + + When theming diff related faces, start by setting the option +‘magit-diff-refine-hunk’ to ‘all’. You might personally prefer to only +refine the current hunk or not use hunk refinement at all, but some of +the users of your theme want all hunks to be refined, so you have to +cater to that. + + (Also turn on ‘magit-diff-highlight-indentation’, +‘magit-diff-highlight-trailing’, and ‘magit-diff-paint-whitespace’; and +insert some whitespace errors into the code you use for testing.) + + For e.g. "added lines" you have to adjust three faces: +‘magit-diff-added’, ‘magit-diff-added-highlight’, and +‘smerge-refined-added’. Make sure that the latter works well with both +of the former, as well as ‘smerge-other’ and ‘diff-added’. Then do the +same for the removed lines, context lines, lines added by us, and lines +added by them. Also make sure the respective added, removed, and +context faces use approximately the same saturation for both the +highlighted and unhighlighted variants. Also make sure the file and +diff headings work nicely with context lines (e.g. make them look +different). Line faces should set both the foreground and the +background color. For example, for added lines use two different +greens. + + It’s best if the foreground color of both the highlighted and the +unhighlighted variants are the same, so you will need to have to find a +color that works well on the highlight and unhighlighted background, the +refine background, and the highlight context background. When there is +an hunk internal region, then the added- and removed-lines background +color is used only within that region. Outside the region the +highlighted context background color is used. This makes it easier to +see what is being staged. With an hunk internal region the hunk heading +is shown using ‘magit-diff-hunk-heading-selection’, and so are the thin +lines that are added around the lines that fall within the region. The +background color of that has to be distinct enough from the various +other involved background colors. + + Nobody said this would be easy. If your theme restricts itself to a +certain set of colors, then you should make an exception here. +Otherwise it would be impossible to make the diffs look good in each and +every variation. Actually you might want to just stick to the default +definitions for these faces. You have been warned. Also please note +that if you do not get this right, this will in some cases look to users +like bugs in Magit - so please do it right or not at all. + + +File: magit.info, Node: FAQ, Next: Debugging Tools, Prev: Plumbing, Up: Top + +Appendix A FAQ +************** + +The next two nodes lists frequently asked questions. For a list of +frequently *and recently* asked questions, i.e. questions that haven’t +made it into the manual yet, see +<https://github.com/magit/magit/wiki/FAQ>. + + Please also use the *note Debugging Tools::. + +* Menu: + +* FAQ - How to ...?:: +* FAQ - Issues and Errors:: + + +File: magit.info, Node: FAQ - How to ...?, Next: FAQ - Issues and Errors, Up: FAQ + +A.1 FAQ - How to ...? +===================== + +* Menu: + +* How to show git's output?:: +* How to install the gitman info manual?:: +* How to show diffs for gpg-encrypted files?:: +* How does branching and pushing work?:: +* Can Magit be used as ediff-version-control-package?:: + + +File: magit.info, Node: How to show git's output?, Next: How to install the gitman info manual?, Up: FAQ - How to ...? + +A.1.1 How to show git’s output? +------------------------------- + +To show the output of recently run git commands, press ‘$’ (or, if that +isn’t available, ‘M-x magit-process-buffer’). This will show a buffer +containing a section per git invocation; as always press ‘TAB’ to expand +or collapse them. + + By default, git’s output is only inserted into the process buffer if +it is run for side-effects. When the output is consumed in some way, +also inserting it into the process buffer would be too expensive. For +debugging purposes, it’s possible to do so anyway by setting +‘magit-git-debug’ to ‘t’. + + +File: magit.info, Node: How to install the gitman info manual?, Next: How to show diffs for gpg-encrypted files?, Prev: How to show git's output?, Up: FAQ - How to ...? + +A.1.2 How to install the gitman info manual? +-------------------------------------------- + +Git’s manpages can be exported as an info manual called ‘gitman’. +Magit’s own info manual links to nodes in that manual instead of the +actual manpages because Info doesn’t support linking to manpages. + + Unfortunately some distributions do not install the ‘gitman’ manual +by default and you will have to install a separate documentation package +to get it. + + Magit patches Info adding the ability to visit links to the ‘gitman’ +Info manual by instead viewing the respective manpage. If you prefer +that approach, then set the value of ‘magit-view-git-manual-method’ to +one of the supported packages ‘man’ or ‘woman’, e.g.: + + (setq magit-view-git-manual-method 'man) + + +File: magit.info, Node: How to show diffs for gpg-encrypted files?, Next: How does branching and pushing work?, Prev: How to install the gitman info manual?, Up: FAQ - How to ...? + +A.1.3 How to show diffs for gpg-encrypted files? +------------------------------------------------ + +Git supports showing diffs for encrypted files, but has to be told to do +so. Since Magit just uses Git to get the diffs, configuring Git also +affects the diffs displayed inside Magit. + + git config --global diff.gpg.textconv "gpg --no-tty --decrypt" + echo "*.gpg filter=gpg diff=gpg" > .gitattributes + + +File: magit.info, Node: How does branching and pushing work?, Next: Can Magit be used as ediff-version-control-package?, Prev: How to show diffs for gpg-encrypted files?, Up: FAQ - How to ...? + +A.1.4 How does branching and pushing work? +------------------------------------------ + +Please see *note Branching:: and +<http://emacsair.me/2016/01/17/magit-2.4> + + +File: magit.info, Node: Can Magit be used as ediff-version-control-package?, Prev: How does branching and pushing work?, Up: FAQ - How to ...? + +A.1.5 Can Magit be used as ‘ediff-version-control-package’? +----------------------------------------------------------- + +No, it cannot. For that to work the functions ‘ediff-magit-internal’ +and ‘ediff-magit-merge-internal’ would have to be implemented, and they +are not. These two functions are only used by the three commands +‘ediff-revision’, ‘ediff-merge-revisions-with-ancestor’, and +‘ediff-merge-revisions’. + + These commands only delegate the task of populating buffers with +certain revisions to the "internal" functions. The equally important +task of determining which revisions are to be compared/merged is not +delegated. Instead this is done without any support whatsoever from the +version control package/system - meaning that the user has to enter the +revisions explicitly. Instead of implementing ‘ediff-magit-internal’ we +provide ‘magit-ediff-compare’, which handles both tasks like it is 2005. + + The other commands ‘ediff-merge-revisions’ and +‘ediff-merge-revisions-with-ancestor’ are normally not what you want +when using a modern version control system like Git. Instead of letting +the user resolve only those conflicts which Git could not resolve on its +own, they throw away all work done by Git and then expect the user to +manually merge all conflicts, including those that had already been +resolved. That made sense back in the days when version control systems +couldn’t merge (or so I have been told), but not anymore. Once in a +blue moon you might actually want to see all conflicts, in which case +you *can* use these commands, which then use ‘ediff-vc-merge-internal’. +So we don’t actually have to implement ‘ediff-magit-merge-internal’. +Instead we provide the more useful command ‘magit-ediff-resolve’ which +only shows yet-to-be resolved conflicts. + + +File: magit.info, Node: FAQ - Issues and Errors, Prev: FAQ - How to ...?, Up: FAQ + +A.2 FAQ - Issues and Errors +=========================== + +* Menu: + +* Magit is slow:: +* I changed several thousand files at once and now Magit is unusable:: +* I am having problems committing:: +* I am using MS Windows and cannot push with Magit:: +* I am using OS X and SOMETHING works in shell, but not in Magit: I am using OS X and SOMETHING works in shell but not in Magit. +* Diffs contain control sequences:: +* Expanding a file to show the diff causes it to disappear:: +* Point is wrong in the COMMIT_EDITMSG buffer:: +* The mode-line information isn't always up-to-date:: +* A branch and tag sharing the same name breaks SOMETHING:: +* My Git hooks work on the command-line but not inside Magit:: + + +File: magit.info, Node: Magit is slow, Next: I changed several thousand files at once and now Magit is unusable, Up: FAQ - Issues and Errors + +A.2.1 Magit is slow +------------------- + +See *note Performance::. + + +File: magit.info, Node: I changed several thousand files at once and now Magit is unusable, Next: I am having problems committing, Prev: Magit is slow, Up: FAQ - Issues and Errors + +A.2.2 I changed several thousand files at once and now Magit is unusable +------------------------------------------------------------------------ + +Magit is *currently* not expected to work under such conditions. It +sure would be nice if it did, and v2.5 will hopefully be a big step into +that direction. But it might take until v3.1 to accomplish fully +satisfactory performance, because that requires some heavy refactoring. + + But for now we recommend you use the command line to complete this +one commit. Also see *note Performance::. + + +File: magit.info, Node: I am having problems committing, Next: I am using MS Windows and cannot push with Magit, Prev: I changed several thousand files at once and now Magit is unusable, Up: FAQ - Issues and Errors + +A.2.3 I am having problems committing +------------------------------------- + +That likely means that Magit is having problems finding an appropriate +emacsclient executable. See *note (with-editor)Configuring +With-Editor:: and *note (with-editor)Debugging::. + + +File: magit.info, Node: I am using MS Windows and cannot push with Magit, Next: I am using OS X and SOMETHING works in shell but not in Magit, Prev: I am having problems committing, Up: FAQ - Issues and Errors + +A.2.4 I am using MS Windows and cannot push with Magit +------------------------------------------------------ + +It’s almost certain that Magit is only incidental to this issue. It is +much more likely that this is a configuration issue, even if you can +push on the command line. + + Detailed setup instructions can be found at +<https://github.com/magit/magit/wiki/Pushing-with-Magit-from-Windows>. + + +File: magit.info, Node: I am using OS X and SOMETHING works in shell but not in Magit, Next: Diffs contain control sequences, Prev: I am using MS Windows and cannot push with Magit, Up: FAQ - Issues and Errors + +A.2.5 I am using OS X and SOMETHING works in shell, but not in Magit +-------------------------------------------------------------------- + +This usually occurs because Emacs doesn’t have the same environment +variables as your shell. Try installing and configuring +<https://github.com/purcell/exec-path-from-shell>. By default it +synchronizes ‘$PATH’, which helps Magit find the same ‘git’ as the one +you are using on the shell. + + If SOMETHING is "passphrase caching with gpg-agent for commit and/or +tag signing", then you’ll also need to synchronize ‘$GPG_AGENT_INFO’. + + +File: magit.info, Node: Diffs contain control sequences, Next: Expanding a file to show the diff causes it to disappear, Prev: I am using OS X and SOMETHING works in shell but not in Magit, Up: FAQ - Issues and Errors + +A.2.6 Diffs contain control sequences +------------------------------------- + +This happens when you configure Git to always color diffs and/or all of +its output. The valid values for relevant Git variables ‘color.ui’ and +‘color.diff’ are ‘false’, ‘true’ and ‘always’, and the default is +‘true’. You should leave it that because then you get colorful output +in terminals but git’s output is consumed by something else, then no +colors are used. + + If you actually use some other tool which expects that requires that +you force git to output control sequences (which is highly unlikely), +then you can override these settings just for Magit by using: + + (setq magit-git-global-arguments + (nconc magit-git-global-arguments + '("-c" "color.ui=false" + "-c" "color.diff=false"))) + + +File: magit.info, Node: Expanding a file to show the diff causes it to disappear, Next: Point is wrong in the COMMIT_EDITMSG buffer, Prev: Diffs contain control sequences, Up: FAQ - Issues and Errors + +A.2.7 Expanding a file to show the diff causes it to disappear +-------------------------------------------------------------- + +This is probably caused by a change of a ‘diff.*’ Git variable. You +probably set that variable for a reason, and should therefore only undo +that setting in Magit by customizing ‘magit-git-global-arguments’. + + +File: magit.info, Node: Point is wrong in the COMMIT_EDITMSG buffer, Next: The mode-line information isn't always up-to-date, Prev: Expanding a file to show the diff causes it to disappear, Up: FAQ - Issues and Errors + +A.2.8 Point is wrong in the ‘COMMIT_EDITMSG’ buffer +--------------------------------------------------- + +Neither Magit nor ‘git-commit‘ fiddle with point in the buffer used to +write commit messages, so something else must be doing it. + + You have probably globally enabled a mode which does restore point in +file-visiting buffers. It might be a bit surprising, but when you write +a commit message, then you are actually editing a file. + + So you have to figure out which package is doing. ‘saveplace’, +‘pointback’, and ‘session’ are likely candidates. These snippets might +help: + + (setq session-name-disable-regexp "\\(?:\\`'\\.git/[A-Z_]+\\'\\)") + + (with-eval-after-load 'pointback + (lambda () + (when (or git-commit-mode git-rebase-mode) + (pointback-mode -1)))) + + +File: magit.info, Node: The mode-line information isn't always up-to-date, Next: A branch and tag sharing the same name breaks SOMETHING, Prev: Point is wrong in the COMMIT_EDITMSG buffer, Up: FAQ - Issues and Errors + +A.2.9 The mode-line information isn’t always up-to-date +------------------------------------------------------- + +Magit is not responsible for the version control information that is +being displayed in the mode-line and looks something like ‘Git-master’. +The built-in "Version Control" package, also known as "VC", updates that +information, and can be told to do so more often: + + (setq auto-revert-check-vc-info t) + + But doing so isn’t good for performance. For more (overly +optimistic) information see *note (emacs)VC Mode Line::. + + If you don’t really care about seeing that information in the +mode-line, but just don’t want to see _incorrect_ information, then +consider disabling VC when using Git: + + (setq vc-handled-backends (delq 'Git vc-handled-backends)) + + Or to disable it completely: + + (setq vc-handled-backends nil) + + +File: magit.info, Node: A branch and tag sharing the same name breaks SOMETHING, Next: My Git hooks work on the command-line but not inside Magit, Prev: The mode-line information isn't always up-to-date, Up: FAQ - Issues and Errors + +A.2.10 A branch and tag sharing the same name breaks SOMETHING +-------------------------------------------------------------- + +Or more generally, ambiguous refnames break SOMETHING. + + Magit assumes that refs are named non-ambiguously across the +"refs/heads/", "refs/tags/", and "refs/remotes/" namespaces (i.e., all +the names remain unique when those prefixes are stripped). We consider +ambiguous refnames unsupported and recommend that you use a +non-ambiguous naming scheme. However, if you do work with a repository +that has ambiguous refnames, please report any issues you encounter so +that we can investigate whether there is a simple fix. + + +File: magit.info, Node: My Git hooks work on the command-line but not inside Magit, Prev: A branch and tag sharing the same name breaks SOMETHING, Up: FAQ - Issues and Errors + +A.2.11 My Git hooks work on the command-line but not inside Magit +----------------------------------------------------------------- + +When Magit calls ‘git’ it adds a few global arguments including +‘--literal-pathspecs’ and the ‘git’ process started by Magit then passes +that setting on to other ‘git’ process it starts itself. It does so by +setting the environment variable ‘GIT_LITERAL_PATHSPECS’, not by calling +subprocesses with the ‘--literal-pathspecs’. You can therefore override +this setting in hook scripts using ‘unset GIT_LITERAL_PATHSPECS’. + + +File: magit.info, Node: Debugging Tools, Next: Keystroke Index, Prev: FAQ, Up: Top + +B Debugging Tools +***************** + +Magit and its dependencies provide a few debugging tools, and we +appreciate it very much if you use those tools before reporting an +issue. Please include all relevant output when reporting an issue. + +‘M-x magit-version’ (‘magit-version’) + + This command shows the currently used versions of Magit, Git, and + Emacs in the echo area. Non-interactively this just returns the + Magit version. + +‘M-x magit-emacs-Q-command’ (‘magit-emacs-Q-command’) + + This command shows a debugging shell command in the echo area and + adds it to the kill ring. Paste that command into a shell an run + it. + + This shell command starts ‘emacs’ with only ‘magit’ and its + dependencies loaded. Neither your configuration nor other + installed packages are loaded. This makes it easier to determine + whether some issue lays with Magit or something else. + + If you run Magit from its Git repository, then you should be able + to use ‘make emacs-Q’ instead of the output of this command. + +‘M-x magit-debug-git-executable’ (‘magit-debug-git-executable’) + + This command displays a buffer containing information about the + available and used ‘git’ executable(s), and can be useful when + investigating ‘exec-path’ issues. + + Also see *note Git Executable::. + +‘M-x with-editor-debug’ (‘with-editor-debug’) + + This command displays a buffer containing information about the + available and used ‘git’ executable(s), and can be useful when + investigating why Magit (or rather ‘with-editor’) cannot find an + appropriate ‘emacsclient’ executable. + + Also see *note (with-editor)Debugging::. + + Please also see the *note FAQ::. + + +File: magit.info, Node: Keystroke Index, Next: Command Index, Prev: Debugging Tools, Up: Top + +Appendix C Keystroke Index +************************** + + +* Menu: + +* !: Running Git Manually. + (line 12) +* ! !: Running Git Manually. + (line 16) +* ! a: Running Git Manually. + (line 57) +* ! b: Running Git Manually. + (line 61) +* ! g: Running Git Manually. + (line 65) +* ! k: Running Git Manually. + (line 53) +* ! p: Running Git Manually. + (line 24) +* ! s: Running Git Manually. + (line 34) +* ! S: Running Git Manually. + (line 39) +* $: Viewing Git Output. (line 16) +* %: Worktree. (line 8) +* % b: Worktree. (line 13) +* % c: Worktree. (line 17) +* % g: Worktree. (line 33) +* % k: Worktree. (line 28) +* % p: Worktree. (line 21) +* +: Log Buffer. (line 59) +* + <1>: Refreshing Diffs. (line 68) +* -: Log Buffer. (line 63) +* - <1>: Refreshing Diffs. (line 64) +* 0: Refreshing Diffs. (line 72) +* 1: Section Visibility. (line 26) +* 2: Section Visibility. (line 27) +* 3: Section Visibility. (line 28) +* 4: Section Visibility. (line 29) +* =: Log Buffer. (line 53) +* ^: Section Movement. (line 31) +* a: Applying. (line 33) +* A: Cherry Picking. (line 8) +* A A: Cherry Picking. (line 16) +* A a: Cherry Picking. (line 23) +* A A <1>: Cherry Picking. (line 89) +* A a <1>: Cherry Picking. (line 97) +* A d: Cherry Picking. (line 53) +* A h: Cherry Picking. (line 41) +* A n: Cherry Picking. (line 64) +* A s: Cherry Picking. (line 75) +* A s <1>: Cherry Picking. (line 93) +* B: Bisecting. (line 8) +* b: Blaming. (line 86) +* b <1>: The Branch Popup. (line 12) +* B B: Bisecting. (line 16) +* B b: Bisecting. (line 31) +* b b: The Branch Popup. (line 37) +* b C: The Branch Popup. (line 29) +* b c: The Branch Popup. (line 55) +* B g: Bisecting. (line 36) +* B k: Bisecting. (line 41) +* b k: The Branch Popup. (line 240) +* b l: The Branch Popup. (line 62) +* b n: The Branch Popup. (line 45) +* B r: Bisecting. (line 47) +* b r: The Branch Popup. (line 246) +* B s: Bisecting. (line 24) +* b s: The Branch Popup. (line 85) +* b x: The Branch Popup. (line 224) +* b Y: The Branch Popup. (line 113) +* b y: The Branch Popup. (line 218) +* c: Blaming. (line 120) +* c <1>: Initiating a Commit. (line 8) +* c <2>: Editing Rebase Sequences. + (line 72) +* c a: Initiating a Commit. (line 18) +* c A: Initiating a Commit. (line 66) +* c c: Initiating a Commit. (line 13) +* c e: Initiating a Commit. (line 22) +* c f: Initiating a Commit. (line 42) +* c F: Initiating a Commit. (line 50) +* c s: Initiating a Commit. (line 54) +* c S: Initiating a Commit. (line 62) +* c w: Initiating a Commit. (line 32) +* C-<return>: Diff Buffer. (line 48) +* C-<tab>: Section Visibility. (line 13) +* C-c C-a: Editing Commit Messages. + (line 128) +* C-c C-b: Log Buffer. (line 19) +* C-c C-b <1>: Refreshing Diffs. (line 90) +* C-c C-c: Popup Buffers and Prefix Commands. + (line 20) +* C-c C-c <1>: Select from Log. (line 20) +* C-c C-c <2>: Editing Commit Messages. + (line 19) +* C-c C-c <3>: Editing Rebase Sequences. + (line 6) +* C-c C-d: Refreshing Diffs. (line 80) +* C-c C-d <1>: Editing Commit Messages. + (line 57) +* C-c C-e: Diff Buffer. (line 74) +* C-c C-f: Log Buffer. (line 23) +* C-c C-f <1>: Refreshing Diffs. (line 94) +* C-c C-i: Editing Commit Messages. + (line 153) +* C-c C-k: Select from Log. (line 26) +* C-c C-k <1>: Editing Commit Messages. + (line 24) +* C-c C-k <2>: Editing Rebase Sequences. + (line 11) +* C-c C-n: Log Buffer. (line 27) +* C-c C-o: Editing Commit Messages. + (line 144) +* C-c C-p: Editing Commit Messages. + (line 148) +* C-c C-r: Editing Commit Messages. + (line 132) +* C-c C-s: Editing Commit Messages. + (line 136) +* C-c C-t: Diff Buffer. (line 70) +* C-c C-t <1>: Editing Commit Messages. + (line 140) +* C-c C-w: Editing Commit Messages. + (line 63) +* C-c M-g: Minor Mode for Buffers Visiting Files. + (line 19) +* C-c M-g B: Minor Mode for Buffers Visiting Files. + (line 80) +* C-c M-g b: Minor Mode for Buffers Visiting Files. + (line 86) +* C-c M-g c: Minor Mode for Buffers Visiting Files. + (line 33) +* C-c M-g D: Minor Mode for Buffers Visiting Files. + (line 39) +* C-c M-g d: Minor Mode for Buffers Visiting Files. + (line 47) +* C-c M-g e: Minor Mode for Buffers Visiting Files. + (line 102) +* C-c M-g f: Minor Mode for Buffers Visiting Files. + (line 96) +* C-c M-g L: Minor Mode for Buffers Visiting Files. + (line 57) +* C-c M-g l: Minor Mode for Buffers Visiting Files. + (line 64) +* C-c M-g p: Minor Mode for Buffers Visiting Files. + (line 112) +* C-c M-g r: Minor Mode for Buffers Visiting Files. + (line 91) +* C-c M-g s: Minor Mode for Buffers Visiting Files. + (line 24) +* C-c M-g t: Minor Mode for Buffers Visiting Files. + (line 71) +* C-c M-g u: Minor Mode for Buffers Visiting Files. + (line 28) +* C-c M-s: Editing Commit Messages. + (line 35) +* C-w: Common Commands. (line 21) +* C-x g: Status Buffer. (line 22) +* C-x u: Editing Rebase Sequences. + (line 89) +* d: Diffing. (line 20) +* D: Refreshing Diffs. (line 11) +* d c: Diffing. (line 67) +* d d: Diffing. (line 25) +* D f: Refreshing Diffs. (line 45) +* D F: Refreshing Diffs. (line 50) +* D g: Refreshing Diffs. (line 16) +* d p: Diffing. (line 59) +* d r: Diffing. (line 29) +* D r: Refreshing Diffs. (line 40) +* d s: Diffing. (line 49) +* D s: Refreshing Diffs. (line 21) +* d t: Diffing. (line 72) +* D t: Refreshing Diffs. (line 36) +* d u: Diffing. (line 55) +* d w: Diffing. (line 43) +* D w: Refreshing Diffs. (line 28) +* DEL: Log Buffer. (line 43) +* DEL <1>: Diff Buffer. (line 103) +* DEL <2>: Blaming. (line 73) +* DEL <3>: Editing Rebase Sequences. + (line 28) +* e: Ediffing. (line 9) +* E: Ediffing. (line 21) +* e <1>: Editing Rebase Sequences. + (line 55) +* E c: Ediffing. (line 65) +* E i: Ediffing. (line 57) +* E m: Ediffing. (line 35) +* E r: Ediffing. (line 26) +* E s: Ediffing. (line 48) +* E u: Ediffing. (line 53) +* E w: Ediffing. (line 61) +* E z: Ediffing. (line 69) +* f: Editing Rebase Sequences. + (line 63) +* f <1>: Fetching. (line 11) +* F: Pulling. (line 11) +* f a: Fetching. (line 38) +* f e: Fetching. (line 24) +* F e: Pulling. (line 24) +* f m: Fetching. (line 42) +* f o: Fetching. (line 28) +* f p: Fetching. (line 16) +* F p: Pulling. (line 16) +* f r: Fetching. (line 33) +* f u: Fetching. (line 20) +* F u: Pulling. (line 20) +* g: Automatic Refreshing of Magit Buffers. + (line 22) +* G: Automatic Refreshing of Magit Buffers. + (line 31) +* j: Diff Buffer. (line 93) +* k: Viewing Git Output. (line 24) +* k <1>: Applying. (line 40) +* k <2>: Editing Rebase Sequences. + (line 68) +* k <3>: Stashing. (line 95) +* l: Logging. (line 28) +* L: Refreshing Logs. (line 11) +* L <1>: Log Buffer. (line 6) +* L <2>: Log Margin. (line 47) +* l a: Logging. (line 58) +* l b: Logging. (line 54) +* L d: Log Margin. (line 64) +* L g: Refreshing Logs. (line 16) +* l h: Logging. (line 46) +* l H: Reflog. (line 19) +* l l: Logging. (line 33) +* l L: Logging. (line 50) +* L L: Log Margin. (line 56) +* L l: Log Margin. (line 60) +* l o: Logging. (line 39) +* l O: Reflog. (line 15) +* l r: Reflog. (line 11) +* L s: Refreshing Logs. (line 21) +* L t: Refreshing Logs. (line 36) +* L w: Refreshing Logs. (line 28) +* m: Merging. (line 9) +* M: The Remote Popup. (line 13) +* m a: Merging. (line 44) +* m a <1>: Merging. (line 94) +* M a: The Remote Popup. (line 35) +* M C: The Remote Popup. (line 26) +* m e: Merging. (line 30) +* m i: Merging. (line 57) +* M k: The Remote Popup. (line 50) +* m m: Merging. (line 17) +* m m <1>: Merging. (line 88) +* m n: Merging. (line 37) +* m p: Merging. (line 80) +* M p: The Remote Popup. (line 54) +* M P: The Remote Popup. (line 59) +* M r: The Remote Popup. (line 40) +* m s: Merging. (line 71) +* M u: The Remote Popup. (line 45) +* M-1: Section Visibility. (line 33) +* M-2: Section Visibility. (line 34) +* M-3: Section Visibility. (line 35) +* M-4: Section Visibility. (line 36) +* M-<tab>: Section Visibility. (line 17) +* M-n: Section Movement. (line 26) +* M-n <1>: Editing Commit Messages. + (line 45) +* M-n <2>: Editing Rebase Sequences. + (line 47) +* M-p: Section Movement. (line 20) +* M-p <1>: Editing Commit Messages. + (line 39) +* M-p <2>: Editing Rebase Sequences. + (line 43) +* M-w: Blaming. (line 112) +* M-w <1>: Common Commands. (line 10) +* M-x magit-clone: Repository Setup. (line 16) +* M-x magit-debug-git-executable: Git Executable. (line 45) +* M-x magit-debug-git-executable <1>: Debugging Tools. (line 30) +* M-x magit-describe-section: Section Types and Values. + (line 13) +* M-x magit-describe-section <1>: Matching Sections. (line 6) +* M-x magit-emacs-Q-command: Debugging Tools. (line 16) +* M-x magit-find-file: Visiting Blobs. (line 6) +* M-x magit-find-file-other-window: Visiting Blobs. (line 11) +* M-x magit-init: Repository Setup. (line 6) +* M-x magit-reset-index: Staging and Unstaging. + (line 87) +* M-x magit-reverse-in-index: Staging and Unstaging. + (line 62) +* M-x magit-stage-file: Staging from File-Visiting Buffers. + (line 10) +* M-x magit-toggle-buffer-lock: Modes and Buffers. (line 17) +* M-x magit-unstage-file: Staging from File-Visiting Buffers. + (line 18) +* M-x magit-version: Git Executable. (line 17) +* M-x magit-version <1>: Debugging Tools. (line 10) +* M-x magit-wip-commit: Wip Modes. (line 129) +* M-x with-editor-debug: Debugging Tools. (line 38) +* n: Section Movement. (line 16) +* n <1>: Blaming. (line 91) +* N: Blaming. (line 95) +* n <2>: Editing Rebase Sequences. + (line 39) +* n <3>: Minor Mode for Buffers Visiting Blobs. + (line 16) +* o: Submodule Popup. (line 6) +* O: Subtree. (line 8) +* o a: Submodule Popup. (line 19) +* O a: Subtree. (line 20) +* O c: Subtree. (line 24) +* o d: Submodule Popup. (line 49) +* o f: Submodule Popup. (line 57) +* O f: Subtree. (line 32) +* o l: Submodule Popup. (line 53) +* O m: Subtree. (line 28) +* o p: Submodule Popup. (line 33) +* O p: Subtree. (line 36) +* o r: Submodule Popup. (line 26) +* o s: Submodule Popup. (line 43) +* O s: Subtree. (line 41) +* o u: Submodule Popup. (line 38) +* p: Section Movement. (line 10) +* p <1>: Blaming. (line 99) +* P: Blaming. (line 103) +* p <2>: Editing Rebase Sequences. + (line 35) +* P <1>: Pushing. (line 11) +* p <3>: Minor Mode for Buffers Visiting Blobs. + (line 12) +* P e: Pushing. (line 35) +* P m: Pushing. (line 53) +* P o: Pushing. (line 39) +* P p: Pushing. (line 16) +* P r: Pushing. (line 44) +* P t: Pushing. (line 59) +* P T: Pushing. (line 65) +* P u: Pushing. (line 26) +* q: Quitting Windows. (line 6) +* q <1>: Log Buffer. (line 12) +* q <2>: Blaming. (line 107) +* q <3>: Minor Mode for Buffers Visiting Blobs. + (line 20) +* r: Rebasing. (line 9) +* r <1>: Editing Rebase Sequences. + (line 51) +* r a: Rebasing. (line 107) +* r e: Rebasing. (line 33) +* r e <1>: Rebasing. (line 103) +* r f: Rebasing. (line 73) +* r i: Rebasing. (line 69) +* r k: Rebasing. (line 85) +* r m: Rebasing. (line 77) +* r p: Rebasing. (line 24) +* r r: Rebasing. (line 92) +* r s: Rebasing. (line 39) +* r s <1>: Rebasing. (line 99) +* r u: Rebasing. (line 29) +* r w: Rebasing. (line 81) +* RET: Diff Buffer. (line 8) +* RET <1>: References Buffer. (line 166) +* RET <2>: Blaming. (line 59) +* RET <3>: Editing Rebase Sequences. + (line 16) +* s: Staging and Unstaging. + (line 28) +* S: Staging and Unstaging. + (line 36) +* s <1>: Editing Rebase Sequences. + (line 59) +* S-<tab>: Section Visibility. (line 22) +* SPC: Log Buffer. (line 33) +* SPC <1>: Diff Buffer. (line 99) +* SPC <2>: Blaming. (line 63) +* SPC <3>: Editing Rebase Sequences. + (line 21) +* t: Tagging. (line 8) +* T: Notes. (line 8) +* T a: Notes. (line 51) +* T c: Notes. (line 46) +* t k: Tagging. (line 18) +* T m: Notes. (line 37) +* t p: Tagging. (line 24) +* T p: Notes. (line 29) +* T r: Notes. (line 21) +* t t: Tagging. (line 13) +* T T: Notes. (line 13) +* TAB: Section Visibility. (line 9) +* u: Staging and Unstaging. + (line 43) +* U: Staging and Unstaging. + (line 52) +* v: Applying. (line 44) +* V: Reverting. (line 6) +* V A: Reverting. (line 30) +* V a: Reverting. (line 38) +* V s: Reverting. (line 34) +* V V: Reverting. (line 14) +* V v: Reverting. (line 20) +* W: Creating and Sending Patches. + (line 6) +* w: Applying Patches. (line 8) +* w a: Applying Patches. (line 34) +* w a <1>: Applying Patches. (line 42) +* w a a: Applying Patches. (line 47) +* w m: Applying Patches. (line 19) +* W p: Creating and Sending Patches. + (line 11) +* W r: Creating and Sending Patches. + (line 17) +* w s: Applying Patches. (line 30) +* w w: Applying Patches. (line 13) +* w w <1>: Applying Patches. (line 26) +* x: Editing Rebase Sequences. + (line 76) +* x <1>: Resetting. (line 8) +* X f: Resetting. (line 37) +* X h: Resetting. (line 25) +* X i: Resetting. (line 30) +* X m: Resetting. (line 14) +* X s: Resetting. (line 19) +* Y: Cherries. (line 17) +* y: References Buffer. (line 6) +* y <1>: Editing Rebase Sequences. + (line 85) +* y c: References Buffer. (line 19) +* y o: References Buffer. (line 24) +* y y: References Buffer. (line 14) +* z: Stashing. (line 8) +* z a: Stashing. (line 58) +* z b: Stashing. (line 80) +* z B: Stashing. (line 85) +* z f: Stashing. (line 91) +* z i: Stashing. (line 20) +* z I: Stashing. (line 46) +* z k: Stashing. (line 71) +* z l: Stashing. (line 99) +* z p: Stashing. (line 64) +* z v: Stashing. (line 76) +* z w: Stashing. (line 25) +* z W: Stashing. (line 51) +* z x: Stashing. (line 32) +* z z: Stashing. (line 13) +* z Z: Stashing. (line 39) + + +File: magit.info, Node: Command Index, Next: Function Index, Prev: Keystroke Index, Up: Top + +Appendix D Command Index +************************ + + +* Menu: + +* auto-revert-mode: Automatic Reverting of File-Visiting Buffers. + (line 62) +* forward-line: Editing Rebase Sequences. + (line 39) +* git-commit-ack: Editing Commit Messages. + (line 128) +* git-commit-cc: Editing Commit Messages. + (line 144) +* git-commit-next-message: Editing Commit Messages. + (line 45) +* git-commit-prev-message: Editing Commit Messages. + (line 39) +* git-commit-reported: Editing Commit Messages. + (line 148) +* git-commit-review: Editing Commit Messages. + (line 132) +* git-commit-save-message: Editing Commit Messages. + (line 35) +* git-commit-signoff: Editing Commit Messages. + (line 136) +* git-commit-suggested: Editing Commit Messages. + (line 153) +* git-commit-test: Editing Commit Messages. + (line 140) +* git-rebase-backward-line: Editing Rebase Sequences. + (line 35) +* git-rebase-edit: Editing Rebase Sequences. + (line 55) +* git-rebase-exec: Editing Rebase Sequences. + (line 76) +* git-rebase-fixup: Editing Rebase Sequences. + (line 63) +* git-rebase-insert: Editing Rebase Sequences. + (line 85) +* git-rebase-kill-line: Editing Rebase Sequences. + (line 68) +* git-rebase-move-line-down: Editing Rebase Sequences. + (line 47) +* git-rebase-move-line-up: Editing Rebase Sequences. + (line 43) +* git-rebase-pick: Editing Rebase Sequences. + (line 72) +* git-rebase-reword: Editing Rebase Sequences. + (line 51) +* git-rebase-show-commit: Editing Rebase Sequences. + (line 16) +* git-rebase-show-or-scroll-down: Editing Rebase Sequences. + (line 28) +* git-rebase-show-or-scroll-up: Editing Rebase Sequences. + (line 21) +* git-rebase-squash: Editing Rebase Sequences. + (line 59) +* git-rebase-undo: Editing Rebase Sequences. + (line 89) +* ido-enter-magit-status: Status Buffer. (line 47) +* magit-am-abort: Applying Patches. (line 34) +* magit-am-apply-maildir: Applying Patches. (line 19) +* magit-am-apply-patches: Applying Patches. (line 13) +* magit-am-continue: Applying Patches. (line 26) +* magit-am-popup: Applying Patches. (line 8) +* magit-am-skip: Applying Patches. (line 30) +* magit-apply: Applying. (line 33) +* magit-bisect-bad: Bisecting. (line 31) +* magit-bisect-good: Bisecting. (line 36) +* magit-bisect-popup: Bisecting. (line 8) +* magit-bisect-reset: Bisecting. (line 47) +* magit-bisect-run: Bisecting. (line 24) +* magit-bisect-skip: Bisecting. (line 41) +* magit-bisect-start: Bisecting. (line 16) +* magit-blame: Blaming. (line 17) +* magit-blame <1>: Minor Mode for Buffers Visiting Files. + (line 86) +* magit-blame-copy-hash: Blaming. (line 112) +* magit-blame-cycle-style: Blaming. (line 120) +* magit-blame-echo: Blaming. (line 32) +* magit-blame-next-chunk: Blaming. (line 91) +* magit-blame-next-chunk-same-commit: Blaming. (line 95) +* magit-blame-popup: Blaming. (line 86) +* magit-blame-popup <1>: Minor Mode for Buffers Visiting Files. + (line 80) +* magit-blame-previous-chunk: Blaming. (line 99) +* magit-blame-previous-chunk-same-commit: Blaming. (line 103) +* magit-blame-quit: Blaming. (line 107) +* magit-blame-removal: Blaming. (line 38) +* magit-blame-removal <1>: Minor Mode for Buffers Visiting Files. + (line 91) +* magit-blame-reverse: Blaming. (line 46) +* magit-blame-reverse <1>: Minor Mode for Buffers Visiting Files. + (line 96) +* magit-blob-next: Minor Mode for Buffers Visiting Blobs. + (line 16) +* magit-blob-previous: Minor Mode for Buffers Visiting Files. + (line 112) +* magit-blob-previous <1>: Minor Mode for Buffers Visiting Blobs. + (line 12) +* magit-branch: The Branch Popup. (line 45) +* magit-branch-and-checkout: The Branch Popup. (line 55) +* magit-branch-checkout: The Branch Popup. (line 62) +* magit-branch-config-popup: The Branch Popup. (line 29) +* magit-branch-config-popup <1>: The Branch Config Popup. + (line 6) +* magit-branch-delete: The Branch Popup. (line 240) +* magit-branch-or-checkout: The Branch Popup. (line 350) +* magit-branch-orphan: The Branch Popup. (line 345) +* magit-branch-popup: The Branch Popup. (line 12) +* magit-branch-pull-request: The Branch Popup. (line 113) +* magit-branch-rename: The Branch Popup. (line 246) +* magit-branch-reset: The Branch Popup. (line 224) +* magit-branch-shelve: Auxillary Branch Commands. + (line 8) +* magit-branch-spinoff: The Branch Popup. (line 85) +* magit-branch-unshelve: Auxillary Branch Commands. + (line 19) +* magit-checkout: The Branch Popup. (line 37) +* magit-checkout-pull-request: The Branch Popup. (line 218) +* magit-cherry: Cherries. (line 17) +* magit-cherry-apply: Cherry Picking. (line 23) +* magit-cherry-donate: Cherry Picking. (line 53) +* magit-cherry-harvest: Cherry Picking. (line 41) +* magit-cherry-pick: Cherry Picking. (line 16) +* magit-cherry-pick-popup: Cherry Picking. (line 8) +* magit-cherry-spinoff: Cherry Picking. (line 75) +* magit-cherry-spinout: Cherry Picking. (line 64) +* magit-clone: Repository Setup. (line 16) +* magit-commit: Initiating a Commit. (line 13) +* magit-commit-amend: Initiating a Commit. (line 18) +* magit-commit-augment: Initiating a Commit. (line 66) +* magit-commit-extend: Initiating a Commit. (line 22) +* magit-commit-fixup: Initiating a Commit. (line 42) +* magit-commit-instant-fixup: Initiating a Commit. (line 50) +* magit-commit-instant-squash: Initiating a Commit. (line 62) +* magit-commit-popup: Initiating a Commit. (line 8) +* magit-commit-popup <1>: Minor Mode for Buffers Visiting Files. + (line 33) +* magit-commit-reword: Initiating a Commit. (line 32) +* magit-commit-squash: Initiating a Commit. (line 54) +* magit-copy-buffer-revision: Common Commands. (line 21) +* magit-copy-section-value: Common Commands. (line 10) +* magit-cycle-margin-style: Log Margin. (line 60) +* magit-debug-git-executable: Git Executable. (line 45) +* magit-debug-git-executable <1>: Debugging Tools. (line 30) +* magit-describe-section: Section Types and Values. + (line 13) +* magit-describe-section <1>: Matching Sections. (line 6) +* magit-diff: Diffing. (line 29) +* magit-diff-buffer-file: Minor Mode for Buffers Visiting Files. + (line 47) +* magit-diff-buffer-file-popup: Minor Mode for Buffers Visiting Files. + (line 39) +* magit-diff-default-context: Refreshing Diffs. (line 72) +* magit-diff-dwim: Diffing. (line 25) +* magit-diff-edit-hunk-commit: Diff Buffer. (line 74) +* magit-diff-flip-revs: Refreshing Diffs. (line 45) +* magit-diff-less-context: Refreshing Diffs. (line 64) +* magit-diff-more-context: Refreshing Diffs. (line 68) +* magit-diff-paths: Diffing. (line 59) +* magit-diff-popup: Diffing. (line 20) +* magit-diff-refresh: Refreshing Diffs. (line 16) +* magit-diff-refresh-popup: Refreshing Diffs. (line 11) +* magit-diff-save-default-arguments: Refreshing Diffs. (line 28) +* magit-diff-set-default-arguments: Refreshing Diffs. (line 21) +* magit-diff-show-or-scroll-down: Log Buffer. (line 43) +* magit-diff-show-or-scroll-down <1>: Blaming. (line 73) +* magit-diff-show-or-scroll-up: Log Buffer. (line 33) +* magit-diff-show-or-scroll-up <1>: Blaming. (line 63) +* magit-diff-staged: Diffing. (line 49) +* magit-diff-switch-range-type: Refreshing Diffs. (line 40) +* magit-diff-toggle-file-filter: Refreshing Diffs. (line 50) +* magit-diff-toggle-refine-hunk: Refreshing Diffs. (line 36) +* magit-diff-trace-definition: Diff Buffer. (line 70) +* magit-diff-unstaged: Diffing. (line 55) +* magit-diff-visit-file: Diff Buffer. (line 8) +* magit-diff-visit-file-other-window: Diff Buffer. (line 65) +* magit-diff-visit-file-worktree: Diff Buffer. (line 48) +* magit-diff-while-committing: Refreshing Diffs. (line 80) +* magit-diff-while-committing <1>: Editing Commit Messages. + (line 57) +* magit-diff-working-tree: Diffing. (line 43) +* magit-discard: Applying. (line 40) +* magit-dispatch-popup: Popup Buffers and Prefix Commands. + (line 20) +* magit-ediff-compare: Ediffing. (line 26) +* magit-ediff-dwim: Ediffing. (line 9) +* magit-ediff-popup: Ediffing. (line 21) +* magit-ediff-resolve: Ediffing. (line 35) +* magit-ediff-show-commit: Ediffing. (line 65) +* magit-ediff-show-staged: Ediffing. (line 57) +* magit-ediff-show-stash: Ediffing. (line 69) +* magit-ediff-show-unstaged: Ediffing. (line 53) +* magit-ediff-show-working-tree: Ediffing. (line 61) +* magit-ediff-stage: Ediffing. (line 48) +* magit-edit-line-commit: Minor Mode for Buffers Visiting Files. + (line 102) +* magit-emacs-Q-command: Debugging Tools. (line 16) +* magit-fetch: Fetching. (line 24) +* magit-fetch-all: Fetching. (line 38) +* magit-fetch-branch: Fetching. (line 28) +* magit-fetch-from-pushremote: Fetching. (line 16) +* magit-fetch-from-upstream: Fetching. (line 20) +* magit-fetch-modules: Submodule Popup. (line 57) +* magit-fetch-popup: Fetching. (line 11) +* magit-fetch-refspec: Fetching. (line 33) +* magit-file-checkout: Resetting. (line 37) +* magit-file-checkout <1>: Minor Mode for Buffers Visiting Files. + (line 131) +* magit-file-delete: Minor Mode for Buffers Visiting Files. + (line 123) +* magit-file-popup: Minor Mode for Buffers Visiting Files. + (line 19) +* magit-file-rename: Minor Mode for Buffers Visiting Files. + (line 119) +* magit-file-untrack: Minor Mode for Buffers Visiting Files. + (line 127) +* magit-find-file: Visiting Blobs. (line 6) +* magit-find-file-other-window: Visiting Blobs. (line 11) +* magit-format-patch: Creating and Sending Patches. + (line 11) +* magit-git-command: Running Git Manually. + (line 24) +* magit-git-command-topdir: Running Git Manually. + (line 16) +* magit-go-backward: Log Buffer. (line 19) +* magit-go-backward <1>: Refreshing Diffs. (line 90) +* magit-go-forward: Log Buffer. (line 23) +* magit-go-forward <1>: Refreshing Diffs. (line 94) +* magit-init: Repository Setup. (line 6) +* magit-jump-to-diffstat-or-diff: Diff Buffer. (line 93) +* magit-kill-this-buffer: Minor Mode for Buffers Visiting Blobs. + (line 20) +* magit-list-repositories: Repository List. (line 6) +* magit-list-submodules: Listing Submodules. (line 13) +* magit-list-submodules <1>: Submodule Popup. (line 53) +* magit-log: Logging. (line 39) +* magit-log-all: Logging. (line 58) +* magit-log-all-branches: Logging. (line 54) +* magit-log-branches: Logging. (line 50) +* magit-log-buffer-file: Minor Mode for Buffers Visiting Files. + (line 64) +* magit-log-buffer-file-popup: Minor Mode for Buffers Visiting Files. + (line 57) +* magit-log-bury-buffer: Log Buffer. (line 12) +* magit-log-current: Logging. (line 33) +* magit-log-double-commit-limit: Log Buffer. (line 59) +* magit-log-half-commit-limit: Log Buffer. (line 63) +* magit-log-head: Logging. (line 46) +* magit-log-move-to-parent: Log Buffer. (line 27) +* magit-log-popup: Logging. (line 28) +* magit-log-refresh: Refreshing Logs. (line 16) +* magit-log-refresh-popup: Refreshing Logs. (line 11) +* magit-log-refresh-popup <1>: Log Buffer. (line 6) +* magit-log-save-default-arguments: Refreshing Logs. (line 28) +* magit-log-select-pick: Select from Log. (line 20) +* magit-log-select-quit: Select from Log. (line 26) +* magit-log-set-default-arguments: Refreshing Logs. (line 21) +* magit-log-toggle-commit-limit: Log Buffer. (line 53) +* magit-log-trace-definition: Minor Mode for Buffers Visiting Files. + (line 71) +* magit-margin-popup: Log Margin. (line 47) +* magit-merge: Merging. (line 17) +* magit-merge <1>: Merging. (line 88) +* magit-merge-abort: Merging. (line 94) +* magit-merge-absorb: Merging. (line 44) +* magit-merge-editmsg: Merging. (line 30) +* magit-merge-into: Merging. (line 57) +* magit-merge-nocommit: Merging. (line 37) +* magit-merge-popup: Merging. (line 9) +* magit-merge-preview: Merging. (line 80) +* magit-merge-squash: Merging. (line 71) +* magit-mode-bury-buffer: Quitting Windows. (line 6) +* magit-notes-edit: Notes. (line 13) +* magit-notes-merge: Notes. (line 37) +* magit-notes-merge-abort: Notes. (line 51) +* magit-notes-merge-commit: Notes. (line 46) +* magit-notes-popup: Notes. (line 8) +* magit-notes-prune: Notes. (line 29) +* magit-notes-remove: Notes. (line 21) +* magit-patch-apply: Applying Patches. (line 47) +* magit-patch-apply-popup: Applying Patches. (line 42) +* magit-patch-popup: Creating and Sending Patches. + (line 6) +* magit-pop-revision-stack: Editing Commit Messages. + (line 63) +* magit-process: Viewing Git Output. (line 16) +* magit-process-kill: Viewing Git Output. (line 24) +* magit-pull: Pulling. (line 24) +* magit-pull-from-pushremote: Pulling. (line 16) +* magit-pull-from-upstream: Pulling. (line 20) +* magit-pull-popup: Pulling. (line 11) +* magit-push: Pushing. (line 39) +* magit-push-current: Pushing. (line 35) +* magit-push-current-to-pushremote: Pushing. (line 16) +* magit-push-current-to-upstream: Pushing. (line 26) +* magit-push-implicitly args: Pushing. (line 73) +* magit-push-matching: Pushing. (line 53) +* magit-push-popup: Pushing. (line 11) +* magit-push-refspecs: Pushing. (line 44) +* magit-push-tag: Pushing. (line 65) +* magit-push-tags: Pushing. (line 59) +* magit-push-to-remote remote args: Pushing. (line 84) +* magit-rebase: Rebasing. (line 33) +* magit-rebase-abort: Rebasing. (line 107) +* magit-rebase-autosquash: Rebasing. (line 73) +* magit-rebase-continue: Rebasing. (line 92) +* magit-rebase-edit: Rebasing. (line 103) +* magit-rebase-edit-commit: Rebasing. (line 77) +* magit-rebase-interactive: Rebasing. (line 69) +* magit-rebase-onto-pushremote: Rebasing. (line 24) +* magit-rebase-onto-upstream: Rebasing. (line 29) +* magit-rebase-popup: Rebasing. (line 9) +* magit-rebase-remove-commit: Rebasing. (line 85) +* magit-rebase-reword-commit: Rebasing. (line 81) +* magit-rebase-skip: Rebasing. (line 99) +* magit-rebase-subset: Rebasing. (line 39) +* magit-reflog-current: Reflog. (line 11) +* magit-reflog-head: Reflog. (line 19) +* magit-reflog-other: Reflog. (line 15) +* magit-refresh: Automatic Refreshing of Magit Buffers. + (line 22) +* magit-refresh-all: Automatic Refreshing of Magit Buffers. + (line 31) +* magit-remote-add: The Remote Popup. (line 35) +* magit-remote-config-popup: The Remote Popup. (line 26) +* magit-remote-config-popup <1>: The Remote Config Popup. + (line 6) +* magit-remote-popup: The Remote Popup. (line 13) +* magit-remote-prune: The Remote Popup. (line 54) +* magit-remote-prune-refspecs: The Remote Popup. (line 59) +* magit-remote-remove: The Remote Popup. (line 50) +* magit-remote-rename: The Remote Popup. (line 40) +* magit-remote-set-url: The Remote Popup. (line 45) +* magit-request-pull: Creating and Sending Patches. + (line 17) +* magit-reset: Resetting. (line 8) +* magit-reset-hard: Resetting. (line 25) +* magit-reset-head: Resetting. (line 14) +* magit-reset-index: Staging and Unstaging. + (line 87) +* magit-reset-index <1>: Resetting. (line 30) +* magit-reset-soft: Resetting. (line 19) +* magit-reverse: Applying. (line 44) +* magit-reverse-in-index: Staging and Unstaging. + (line 62) +* magit-revert: Reverting. (line 14) +* magit-revert-no-commit: Reverting. (line 20) +* magit-revert-popup: Reverting. (line 6) +* magit-run-git-gui: Running Git Manually. + (line 65) +* magit-run-gitk: Running Git Manually. + (line 53) +* magit-run-gitk-all: Running Git Manually. + (line 57) +* magit-run-gitk-branches: Running Git Manually. + (line 61) +* magit-run-popup: Running Git Manually. + (line 12) +* magit-section-backward: Section Movement. (line 10) +* magit-section-backward-siblings: Section Movement. (line 20) +* magit-section-cycle: Section Visibility. (line 13) +* magit-section-cycle-diffs: Section Visibility. (line 17) +* magit-section-cycle-global: Section Visibility. (line 22) +* magit-section-forward: Section Movement. (line 16) +* magit-section-forward-siblings: Section Movement. (line 26) +* magit-section-hide: Section Visibility. (line 49) +* magit-section-hide-children: Section Visibility. (line 64) +* magit-section-show: Section Visibility. (line 45) +* magit-section-show-children: Section Visibility. (line 58) +* magit-section-show-headings: Section Visibility. (line 53) +* magit-section-show-level-1: Section Visibility. (line 26) +* magit-section-show-level-1-all: Section Visibility. (line 33) +* magit-section-show-level-2: Section Visibility. (line 27) +* magit-section-show-level-2-all: Section Visibility. (line 34) +* magit-section-show-level-3: Section Visibility. (line 28) +* magit-section-show-level-3-all: Section Visibility. (line 35) +* magit-section-show-level-4: Section Visibility. (line 29) +* magit-section-show-level-4-all: Section Visibility. (line 36) +* magit-section-toggle: Section Visibility. (line 9) +* magit-section-toggle-children: Section Visibility. (line 68) +* magit-section-up: Section Movement. (line 31) +* magit-sequence-abort: Cherry Picking. (line 97) +* magit-sequence-abort <1>: Reverting. (line 38) +* magit-sequence-continue: Cherry Picking. (line 89) +* magit-sequence-continue <1>: Reverting. (line 30) +* magit-sequence-skip: Cherry Picking. (line 93) +* magit-sequence-skip <1>: Reverting. (line 34) +* magit-shell-command: Running Git Manually. + (line 39) +* magit-shell-command-topdir: Running Git Manually. + (line 34) +* magit-show-commit: Diffing. (line 67) +* magit-show-commit <1>: Blaming. (line 59) +* magit-show-refs: References Buffer. (line 24) +* magit-show-refs-current: References Buffer. (line 19) +* magit-show-refs-head: References Buffer. (line 14) +* magit-show-refs-popup: References Buffer. (line 6) +* magit-snapshot: Stashing. (line 39) +* magit-snapshot-index: Stashing. (line 46) +* magit-snapshot-worktree: Stashing. (line 51) +* magit-stage: Staging and Unstaging. + (line 28) +* magit-stage-file: Staging from File-Visiting Buffers. + (line 10) +* magit-stage-file <1>: Minor Mode for Buffers Visiting Files. + (line 24) +* magit-stage-modified: Staging and Unstaging. + (line 36) +* magit-stash: Stashing. (line 13) +* magit-stash-apply: Stashing. (line 58) +* magit-stash-branch: Stashing. (line 80) +* magit-stash-branch-here: Stashing. (line 85) +* magit-stash-clear: Stashing. (line 95) +* magit-stash-drop: Stashing. (line 71) +* magit-stash-format-patch: Stashing. (line 91) +* magit-stash-index: Stashing. (line 20) +* magit-stash-keep-index: Stashing. (line 32) +* magit-stash-list: Stashing. (line 99) +* magit-stash-pop: Stashing. (line 64) +* magit-stash-popup: Stashing. (line 8) +* magit-stash-show: Diffing. (line 72) +* magit-stash-show <1>: Stashing. (line 76) +* magit-stash-worktree: Stashing. (line 25) +* magit-status: Status Buffer. (line 22) +* magit-submodule-add: Submodule Popup. (line 19) +* magit-submodule-fetch: Fetching. (line 42) +* magit-submodule-populate: Submodule Popup. (line 33) +* magit-submodule-popup: Submodule Popup. (line 6) +* magit-submodule-register: Submodule Popup. (line 26) +* magit-submodule-synchronize: Submodule Popup. (line 43) +* magit-submodule-unpopulate: Submodule Popup. (line 49) +* magit-submodule-update: Submodule Popup. (line 38) +* magit-subtree-add: Subtree. (line 20) +* magit-subtree-add-commit: Subtree. (line 24) +* magit-subtree-merge: Subtree. (line 28) +* magit-subtree-pull: Subtree. (line 32) +* magit-subtree-push: Subtree. (line 36) +* magit-subtree-split: Subtree. (line 41) +* magit-tag: Tagging. (line 13) +* magit-tag-delete: Tagging. (line 18) +* magit-tag-popup: Tagging. (line 8) +* magit-tag-prune: Tagging. (line 24) +* magit-tag-release: Tagging. (line 28) +* magit-toggle-buffer-lock: Modes and Buffers. (line 17) +* magit-toggle-margin: Refreshing Logs. (line 36) +* magit-toggle-margin <1>: Log Margin. (line 56) +* magit-toggle-margin-details: Log Margin. (line 64) +* magit-tree-popup: Subtree. (line 8) +* magit-unstage: Staging and Unstaging. + (line 43) +* magit-unstage-all: Staging and Unstaging. + (line 52) +* magit-unstage-file: Staging from File-Visiting Buffers. + (line 18) +* magit-unstage-file <1>: Minor Mode for Buffers Visiting Files. + (line 28) +* magit-version: Git Executable. (line 17) +* magit-version <1>: Debugging Tools. (line 10) +* magit-visit-ref: References Buffer. (line 166) +* magit-wip-commit: Wip Modes. (line 129) +* magit-wip-log: Wip Modes. (line 69) +* magit-wip-log-current: Wip Modes. (line 77) +* magit-worktree-branch: Worktree. (line 17) +* magit-worktree-checkout: Worktree. (line 13) +* magit-worktree-checkout-pull-request: Worktree. (line 21) +* magit-worktree-delete: Worktree. (line 28) +* magit-worktree-popup: Worktree. (line 8) +* magit-worktree-status: Worktree. (line 33) +* scroll-down: Diff Buffer. (line 103) +* scroll-up: Diff Buffer. (line 99) +* with-editor-cancel: Editing Commit Messages. + (line 24) +* with-editor-cancel <1>: Editing Rebase Sequences. + (line 11) +* with-editor-debug: Debugging Tools. (line 38) +* with-editor-finish: Editing Commit Messages. + (line 19) +* with-editor-finish <1>: Editing Rebase Sequences. + (line 6) + + +File: magit.info, Node: Function Index, Next: Variable Index, Prev: Command Index, Up: Top + +Appendix E Function Index +************************* + + +* Menu: + +* auto-revert-mode: Automatic Reverting of File-Visiting Buffers. + (line 62) +* git-commit-check-style-conventions: Editing Commit Messages. + (line 247) +* git-commit-propertize-diff: Editing Commit Messages. + (line 206) +* git-commit-save-message: Editing Commit Messages. + (line 187) +* git-commit-setup-changelog-support: Editing Commit Messages. + (line 191) +* git-commit-turn-on-auto-fill: Editing Commit Messages. + (line 196) +* git-commit-turn-on-flyspell: Editing Commit Messages. + (line 201) +* ido-enter-magit-status: Status Buffer. (line 47) +* magit-add-section-hook: Section Hooks. (line 18) +* magit-after-save-refresh-status: Automatic Refreshing of Magit Buffers. + (line 56) +* magit-blame: Blaming. (line 17) +* magit-blame-echo: Blaming. (line 32) +* magit-blame-removal: Blaming. (line 38) +* magit-blame-reverse: Blaming. (line 46) +* magit-branch-config-popup: The Branch Config Popup. + (line 6) +* magit-branch-or-checkout: The Branch Popup. (line 350) +* magit-branch-orphan: The Branch Popup. (line 345) +* magit-branch-shelve: Auxillary Branch Commands. + (line 8) +* magit-branch-unshelve: Auxillary Branch Commands. + (line 19) +* magit-builtin-completing-read: Support for Completion Frameworks. + (line 42) +* magit-call-git: Calling Git for Effect. + (line 28) +* magit-call-process: Calling Git for Effect. + (line 32) +* magit-cancel-section: Creating Sections. (line 71) +* magit-completing-read: Support for Completion Frameworks. + (line 60) +* magit-current-section: Section Selection. (line 6) +* magit-define-section-jumper: Creating Sections. (line 77) +* magit-diff-scope: Matching Sections. (line 111) +* magit-diff-type: Matching Sections. (line 88) +* magit-diff-visit-file-other-window: Diff Buffer. (line 65) +* magit-display-buffer: Switching Buffers. (line 6) +* magit-display-buffer-fullcolumn-most-v1: Switching Buffers. (line 72) +* magit-display-buffer-fullframe-status-topleft-v1: Switching Buffers. + (line 62) +* magit-display-buffer-fullframe-status-v1: Switching Buffers. + (line 56) +* magit-display-buffer-same-window-except-diff-v1: Switching Buffers. + (line 50) +* magit-display-buffer-traditional: Switching Buffers. (line 42) +* magit-file-checkout: Minor Mode for Buffers Visiting Files. + (line 131) +* magit-file-delete: Minor Mode for Buffers Visiting Files. + (line 123) +* magit-file-rename: Minor Mode for Buffers Visiting Files. + (line 119) +* magit-file-untrack: Minor Mode for Buffers Visiting Files. + (line 127) +* magit-generate-buffer-name-default-function: Naming Buffers. + (line 17) +* magit-get-section: Matching Sections. (line 16) +* magit-git: Calling Git for Effect. + (line 65) +* magit-git-exit-code: Getting a Value from Git. + (line 10) +* magit-git-failure: Getting a Value from Git. + (line 19) +* magit-git-false: Getting a Value from Git. + (line 29) +* magit-git-insert: Getting a Value from Git. + (line 34) +* magit-git-items: Getting a Value from Git. + (line 49) +* magit-git-lines: Getting a Value from Git. + (line 44) +* magit-git-str: Getting a Value from Git. + (line 72) +* magit-git-string: Getting a Value from Git. + (line 38) +* magit-git-success: Getting a Value from Git. + (line 14) +* magit-git-true: Getting a Value from Git. + (line 24) +* magit-git-wash: Calling Git for Effect. + (line 70) +* magit-hunk-set-window-start: Section Movement. (line 43) +* magit-ido-completing-read: Support for Completion Frameworks. + (line 48) +* magit-insert-am-sequence: Status Sections. (line 28) +* magit-insert-bisect-log: Status Sections. (line 46) +* magit-insert-bisect-output: Status Sections. (line 38) +* magit-insert-bisect-rest: Status Sections. (line 42) +* magit-insert-diff-filter-header: Status Header Sections. + (line 38) +* magit-insert-error-header: Status Header Sections. + (line 28) +* magit-insert-head-branch-header: Status Header Sections. + (line 42) +* magit-insert-heading: Creating Sections. (line 42) +* magit-insert-ignored-files: Status Sections. (line 100) +* magit-insert-local-branches: References Sections. (line 17) +* magit-insert-merge-log: Status Sections. (line 18) +* magit-insert-modules: Status Module Sections. + (line 12) +* magit-insert-modules-overview: Status Module Sections. + (line 33) +* magit-insert-modules-unpulled-from-pushremote: Status Module Sections. + (line 50) +* magit-insert-modules-unpulled-from-upstream: Status Module Sections. + (line 44) +* magit-insert-modules-unpushed-to-pushremote: Status Module Sections. + (line 62) +* magit-insert-modules-unpushed-to-upstream: Status Module Sections. + (line 56) +* magit-insert-push-branch-header: Status Header Sections. + (line 51) +* magit-insert-rebase-sequence: Status Sections. (line 23) +* magit-insert-recent-commits: Status Sections. (line 115) +* magit-insert-remote-branches: References Sections. (line 21) +* magit-insert-remote-header: Status Header Sections. + (line 67) +* magit-insert-repo-header: Status Header Sections. + (line 63) +* magit-insert-section: Creating Sections. (line 6) +* magit-insert-sequencer-sequence: Status Sections. (line 33) +* magit-insert-staged-changes: Status Sections. (line 63) +* magit-insert-stashes: Status Sections. (line 67) +* magit-insert-status-headers: Status Header Sections. + (line 12) +* magit-insert-submodules: Listing Submodules. (line 35) +* magit-insert-tags: References Sections. (line 25) +* magit-insert-tags-header: Status Header Sections. + (line 56) +* magit-insert-tracked-files: Status Sections. (line 96) +* magit-insert-unpulled-cherries: Status Sections. (line 126) +* magit-insert-unpulled-from-pushremote: Status Sections. (line 79) +* magit-insert-unpulled-from-upstream: Status Sections. (line 74) +* magit-insert-unpulled-or-recent-commits: Status Sections. (line 108) +* magit-insert-unpushed-cherries: Status Sections. (line 133) +* magit-insert-unpushed-to-pushremote: Status Sections. (line 89) +* magit-insert-unpushed-to-upstream: Status Sections. (line 84) +* magit-insert-unstaged-changes: Status Sections. (line 59) +* magit-insert-untracked-files: Status Sections. (line 50) +* magit-insert-upstream-branch-header: Status Header Sections. + (line 46) +* magit-insert-user-header: Status Header Sections. + (line 75) +* magit-list-repositories: Repository List. (line 6) +* magit-list-submodules: Listing Submodules. (line 13) +* magit-log-maybe-show-more-commits: Section Movement. (line 57) +* magit-log-maybe-update-blob-buffer: Section Movement. (line 71) +* magit-log-maybe-update-revision-buffer: Section Movement. (line 64) +* magit-maybe-set-dedicated: Switching Buffers. (line 97) +* magit-mode-display-buffer: Refreshing Buffers. (line 33) +* magit-mode-quit-window: Quitting Windows. (line 31) +* magit-mode-setup: Refreshing Buffers. (line 17) +* magit-push-implicitly: Pushing. (line 73) +* magit-push-to-remote: Pushing. (line 84) +* magit-region-sections: Section Selection. (line 10) +* magit-region-values: Section Selection. (line 29) +* magit-remote-config-popup: The Remote Config Popup. + (line 6) +* magit-repolist-column-ident: Repository List. (line 30) +* magit-repolist-column-path: Repository List. (line 35) +* magit-repolist-column-unpulled-from-pushremote: Repository List. + (line 49) +* magit-repolist-column-unpulled-from-upstream: Repository List. + (line 44) +* magit-repolist-column-unpushed-to-pushremote: Repository List. + (line 59) +* magit-repolist-column-unpushed-to-upstream: Repository List. + (line 54) +* magit-repolist-column-version: Repository List. (line 39) +* magit-restore-window-configuration: Quitting Windows. (line 20) +* magit-revert-buffers: Editing Commit Messages. + (line 178) +* magit-run-git: Calling Git for Effect. + (line 36) +* magit-run-git-async: Calling Git for Effect. + (line 80) +* magit-run-git-with-editor: Calling Git for Effect. + (line 93) +* magit-run-git-with-input: Calling Git for Effect. + (line 40) +* magit-run-git-with-logfile: Calling Git for Effect. + (line 56) +* magit-save-window-configuration: Switching Buffers. (line 86) +* magit-section-case: Matching Sections. (line 64) +* magit-section-hide: Section Visibility. (line 49) +* magit-section-hide-children: Section Visibility. (line 64) +* magit-section-ident: Matching Sections. (line 11) +* magit-section-match: Matching Sections. (line 21) +* magit-section-set-window-start: Section Movement. (line 50) +* magit-section-show: Section Visibility. (line 45) +* magit-section-show-children: Section Visibility. (line 58) +* magit-section-show-headings: Section Visibility. (line 53) +* magit-section-toggle-children: Section Visibility. (line 68) +* magit-section-when: Matching Sections. (line 52) +* magit-start-git: Calling Git for Effect. + (line 105) +* magit-start-process: Calling Git for Effect. + (line 124) +* magit-status-maybe-update-blob-buffer: Section Movement. (line 83) +* magit-status-maybe-update-revision-buffer: Section Movement. + (line 77) +* magit-tag-release: Tagging. (line 28) +* magit-wip-log: Wip Modes. (line 69) +* magit-wip-log-current: Wip Modes. (line 77) +* with-editor-usage-message: Editing Commit Messages. + (line 215) + + +File: magit.info, Node: Variable Index, Prev: Function Index, Up: Top + +Appendix F Variable Index +************************* + + +* Menu: + +* auto-revert-buffer-list-filter: Automatic Reverting of File-Visiting Buffers. + (line 81) +* auto-revert-interval: Automatic Reverting of File-Visiting Buffers. + (line 76) +* auto-revert-stop-on-user-input: Automatic Reverting of File-Visiting Buffers. + (line 71) +* auto-revert-use-notify: Automatic Reverting of File-Visiting Buffers. + (line 49) +* auto-revert-verbose: Automatic Reverting of File-Visiting Buffers. + (line 103) +* branch.autoSetupMerge: The Branch Config Popup. + (line 94) +* branch.autoSetupRebase: The Branch Config Popup. + (line 111) +* branch.NAME.description: The Branch Config Popup. + (line 61) +* branch.NAME.merge: The Branch Config Popup. + (line 23) +* branch.NAME.pushRemote: The Branch Config Popup. + (line 47) +* branch.NAME.rebase: The Branch Config Popup. + (line 35) +* branch.NAME.remote: The Branch Config Popup. + (line 29) +* core.notesRef: Notes. (line 59) +* git-commit-fill-column: Editing Commit Messages. + (line 228) +* git-commit-finish-query-functions: Editing Commit Messages. + (line 233) +* git-commit-known-pseudo-headers: Editing Commit Messages. + (line 124) +* git-commit-major-mode: Editing Commit Messages. + (line 163) +* git-commit-setup-hook: Editing Commit Messages. + (line 174) +* git-commit-summary-max-length: Editing Commit Messages. + (line 222) +* git-rebase-auto-advance: Editing Rebase Sequences. + (line 94) +* git-rebase-confirm-cancel: Editing Rebase Sequences. + (line 102) +* git-rebase-show-instructions: Editing Rebase Sequences. + (line 98) +* global-auto-revert-mode: Automatic Reverting of File-Visiting Buffers. + (line 22) +* magit-auto-revert-immediately: Automatic Reverting of File-Visiting Buffers. + (line 32) +* magit-auto-revert-mode: Automatic Reverting of File-Visiting Buffers. + (line 17) +* magit-auto-revert-tracked-only: Automatic Reverting of File-Visiting Buffers. + (line 55) +* magit-bisect-show-graph: Bisecting. (line 55) +* magit-blame-disable-modes: Blaming. (line 150) +* magit-blame-echo-style: Blaming. (line 133) +* magit-blame-goto-chunk-hook: Blaming. (line 156) +* magit-blame-read-only: Blaming. (line 145) +* magit-blame-styles: Blaming. (line 128) +* magit-blame-time-format: Blaming. (line 140) +* magit-branch-adjust-remote-upstream-alist: The Branch Popup. + (line 303) +* magit-branch-popup-show-variables: The Branch Popup. (line 21) +* magit-branch-prefer-remote-upstream: The Branch Popup. (line 258) +* magit-branch-read-upstream-first: The Branch Popup. (line 252) +* magit-buffer-name-format: Naming Buffers. (line 27) +* magit-bury-buffer-function: Quitting Windows. (line 11) +* magit-cherry-margin: Cherries. (line 22) +* magit-clone-set-remote.pushDefault: Repository Setup. (line 23) +* magit-commit-ask-to-stage: Initiating a Commit. (line 74) +* magit-commit-extend-override-date: Initiating a Commit. (line 79) +* magit-commit-reword-override-date: Initiating a Commit. (line 83) +* magit-commit-squash-confirm: Initiating a Commit. (line 87) +* magit-completing-read-function: Support for Completion Frameworks. + (line 27) +* magit-diff-adjust-tab-width: Diff Options. (line 16) +* magit-diff-buffer-file-locked: Minor Mode for Buffers Visiting Files. + (line 52) +* magit-diff-hide-trailing-cr-characters: Diff Options. (line 67) +* magit-diff-highlight-hunk-region-functions: Diff Options. (line 71) +* magit-diff-highlight-indentation: Diff Options. (line 52) +* magit-diff-highlight-trailing: Diff Options. (line 47) +* magit-diff-paint-whitespace: Diff Options. (line 38) +* magit-diff-refine-hunk: Diff Options. (line 6) +* magit-diff-unmarked-lines-keep-foreground: Diff Options. (line 97) +* magit-diff-visit-previous-blob: Diff Buffer. (line 37) +* magit-display-buffer-function: Switching Buffers. (line 23) +* magit-display-buffer-noselect: Switching Buffers. (line 14) +* magit-dwim-selection: Completion and Confirmation. + (line 42) +* magit-ediff-dwim-show-on-hunks: Ediffing. (line 73) +* magit-ediff-quit-hook: Ediffing. (line 88) +* magit-ediff-show-stash-with-index: Ediffing. (line 81) +* magit-file-mode: Minor Mode for Buffers Visiting Files. + (line 11) +* magit-generate-buffer-name-function: Naming Buffers. (line 6) +* magit-git-debug: Viewing Git Output. (line 28) +* magit-git-debug <1>: Getting a Value from Git. + (line 64) +* magit-git-executable: Git Executable. (line 39) +* magit-git-global-arguments: Global Git Arguments. + (line 6) +* magit-keep-region-overlay: The Selection. (line 52) +* magit-list-refs-sortby: Additional Completion Options. + (line 6) +* magit-log-auto-more: Log Buffer. (line 67) +* magit-log-buffer-file-locked: Minor Mode for Buffers Visiting Files. + (line 75) +* magit-log-margin: Log Margin. (line 12) +* magit-log-section-args: Status Options. (line 36) +* magit-log-section-commit-count: Status Sections. (line 120) +* magit-log-select-margin: Select from Log. (line 30) +* magit-log-show-refname-after-summary: Log Buffer. (line 73) +* magit-module-sections-hook: Status Module Sections. + (line 20) +* magit-module-sections-nested: Status Module Sections. + (line 24) +* magit-no-confirm: Action Confirmation. (line 18) +* magit-pop-revision-stack-format: Editing Commit Messages. + (line 92) +* magit-post-display-buffer-hook: Switching Buffers. (line 92) +* magit-pre-display-buffer-hook: Switching Buffers. (line 81) +* magit-prefer-remote-upstream: The Branch Config Popup. + (line 139) +* magit-process-raise-error: Calling Git for Effect. + (line 151) +* magit-push-current-set-remote-if-missing: Pushing. (line 96) +* magit-reflog-margin: Reflog. (line 23) +* magit-refresh-args: Refreshing Buffers. (line 55) +* magit-refresh-buffer-hook: Automatic Refreshing of Magit Buffers. + (line 40) +* magit-refresh-function: Refreshing Buffers. (line 49) +* magit-refresh-status-buffer: Automatic Refreshing of Magit Buffers. + (line 46) +* magit-refs-filter-alist: References Buffer. (line 149) +* magit-refs-focus-column-width: References Buffer. (line 74) +* magit-refs-margin: References Buffer. (line 89) +* magit-refs-margin-for-tags: References Buffer. (line 115) +* magit-refs-pad-commit-counts: References Buffer. (line 41) +* magit-refs-primary-column-width: References Buffer. (line 61) +* magit-refs-sections-hook: References Sections. (line 13) +* magit-refs-show-commit-count: References Buffer. (line 29) +* magit-refs-show-remote-prefix: References Buffer. (line 54) +* magit-remote-add-set-remote.pushDefault: The Remote Popup. (line 77) +* magit-remote-popup-show-variables: The Remote Popup. (line 18) +* magit-repolist-columns: Repository List. (line 14) +* magit-repository-directories: Status Buffer. (line 30) +* magit-repository-directories-depth: Status Buffer. (line 40) +* magit-revision-insert-related-refs: Revision Buffer. (line 6) +* magit-revision-show-gravatar: Revision Buffer. (line 10) +* magit-revision-use-hash-sections: Revision Buffer. (line 26) +* magit-root-section: Matching Sections. (line 80) +* magit-save-repository-buffers: Automatic Saving of File-Visiting Buffers. + (line 13) +* magit-section-cache-visibility: Section Visibility. (line 95) +* magit-section-initial-visibility-alist: Section Visibility. (line 78) +* magit-section-movement-hook: Section Movement. (line 38) +* magit-section-set-visibility-hook: Section Visibility. (line 106) +* magit-section-show-child-count: Section Options. (line 9) +* magit-shell-command-verbose-prompt: Running Git Manually. + (line 46) +* magit-stashes-margin: Stashing. (line 103) +* magit-status-headers-hook: Status Header Sections. + (line 18) +* magit-status-margin: Status Options. (line 10) +* magit-status-refresh-hook: Status Options. (line 6) +* magit-status-sections-hook: Status Sections. (line 10) +* magit-submodule-list-columns: Listing Submodules. (line 21) +* magit-this-process: Calling Git for Effect. + (line 146) +* magit-uniquify-buffer-names: Naming Buffers. (line 74) +* magit-unstage-committed: Staging and Unstaging. + (line 56) +* magit-update-other-window-delay: Section Movement. (line 89) +* magit-use-sticky-arguments: Popup Buffers and Prefix Commands. + (line 36) +* magit-visit-ref-behavior: References Buffer. (line 177) +* magit-wip-after-apply-mode: Wip Modes. (line 99) +* magit-wip-after-apply-mode-lighter: Wip Modes. (line 141) +* magit-wip-after-save-local-mode-lighter: Wip Modes. (line 137) +* magit-wip-after-save-mode: Wip Modes. (line 93) +* magit-wip-before-change-mode: Wip Modes. (line 113) +* magit-wip-before-change-mode-lighter: Wip Modes. (line 145) +* magit-wip-namespace: Wip Modes. (line 149) +* notes.displayRef: Notes. (line 64) +* pull.rebase: The Branch Config Popup. + (line 70) +* remote.NAME.fetch: The Remote Config Popup. + (line 25) +* remote.NAME.push: The Remote Config Popup. + (line 36) +* remote.NAME.pushurl: The Remote Config Popup. + (line 30) +* remote.NAME.tagOpts: The Remote Config Popup. + (line 41) +* remote.NAME.url: The Remote Config Popup. + (line 20) +* remote.pushDefault: The Branch Config Popup. + (line 84) + |