about summary refs log tree commit diff
path: root/Documentation/config.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/config.txt')
-rw-r--r--Documentation/config.txt460
1 files changed, 460 insertions, 0 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt
new file mode 100644
index 000000000000..e3f5bc3396d0
--- /dev/null
+++ b/Documentation/config.txt
@@ -0,0 +1,460 @@
+CONFIGURATION FILE
+------------------
+
+The Git configuration file contains a number of variables that affect
+the Git commands' behavior. The files `.git/config` and optionally
+`config.worktree` (see `extensions.worktreeConfig` below) in each
+repository are used to store the configuration for that repository, and
+`$HOME/.gitconfig` is used to store a per-user configuration as
+fallback values for the `.git/config` file. The file `/etc/gitconfig`
+can be used to store a system-wide default configuration.
+
+The configuration variables are used by both the Git plumbing
+and the porcelains. The variables are divided into sections, wherein
+the fully qualified variable name of the variable itself is the last
+dot-separated segment and the section name is everything before the last
+dot. The variable names are case-insensitive, allow only alphanumeric
+characters and `-`, and must start with an alphabetic character.  Some
+variables may appear multiple times; we say then that the variable is
+multivalued.
+
+Syntax
+~~~~~~
+
+The syntax is fairly flexible and permissive; whitespaces are mostly
+ignored.  The '#' and ';' characters begin comments to the end of line,
+blank lines are ignored.
+
+The file consists of sections and variables.  A section begins with
+the name of the section in square brackets and continues until the next
+section begins.  Section names are case-insensitive.  Only alphanumeric
+characters, `-` and `.` are allowed in section names.  Each variable
+must belong to some section, which means that there must be a section
+header before the first setting of a variable.
+
+Sections can be further divided into subsections.  To begin a subsection
+put its name in double quotes, separated by space from the section name,
+in the section header, like in the example below:
+
+--------
+	[section "subsection"]
+
+--------
+
+Subsection names are case sensitive and can contain any characters except
+newline and the null byte. Doublequote `"` and backslash can be included
+by escaping them as `\"` and `\\`, respectively. Backslashes preceding
+other characters are dropped when reading; for example, `\t` is read as
+`t` and `\0` is read as `0` Section headers cannot span multiple lines.
+Variables may belong directly to a section or to a given subsection. You
+can have `[section]` if you have `[section "subsection"]`, but you don't
+need to.
+
+There is also a deprecated `[section.subsection]` syntax. With this
+syntax, the subsection name is converted to lower-case and is also
+compared case sensitively. These subsection names follow the same
+restrictions as section names.
+
+All the other lines (and the remainder of the line after the section
+header) are recognized as setting variables, in the form
+'name = value' (or just 'name', which is a short-hand to say that
+the variable is the boolean "true").
+The variable names are case-insensitive, allow only alphanumeric characters
+and `-`, and must start with an alphabetic character.
+
+A line that defines a value can be continued to the next line by
+ending it with a `\`; the backquote and the end-of-line are
+stripped.  Leading whitespaces after 'name =', the remainder of the
+line after the first comment character '#' or ';', and trailing
+whitespaces of the line are discarded unless they are enclosed in
+double quotes.  Internal whitespaces within the value are retained
+verbatim.
+
+Inside double quotes, double quote `"` and backslash `\` characters
+must be escaped: use `\"` for `"` and `\\` for `\`.
+
+The following escape sequences (beside `\"` and `\\`) are recognized:
+`\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
+and `\b` for backspace (BS).  Other char escape sequences (including octal
+escape sequences) are invalid.
+
+
+Includes
+~~~~~~~~
+
+The `include` and `includeIf` sections allow you to include config
+directives from another source. These sections behave identically to
+each other with the exception that `includeIf` sections may be ignored
+if their condition does not evaluate to true; see "Conditional includes"
+below.
+
+You can include a config file from another by setting the special
+`include.path` (or `includeIf.*.path`) variable to the name of the file
+to be included. The variable takes a pathname as its value, and is
+subject to tilde expansion. These variables can be given multiple times.
+
+The contents of the included file are inserted immediately, as if they
+had been found at the location of the include directive. If the value of the
+variable is a relative path, the path is considered to
+be relative to the configuration file in which the include directive
+was found.  See below for examples.
+
+Conditional includes
+~~~~~~~~~~~~~~~~~~~~
+
+You can include a config file from another conditionally by setting a
+`includeIf.<condition>.path` variable to the name of the file to be
+included.
+
+The condition starts with a keyword followed by a colon and some data
+whose format and meaning depends on the keyword. Supported keywords
+are:
+
+`gitdir`::
+
+	The data that follows the keyword `gitdir:` is used as a glob
+	pattern. If the location of the .git directory matches the
+	pattern, the include condition is met.
++
+The .git location may be auto-discovered, or come from `$GIT_DIR`
+environment variable. If the repository is auto discovered via a .git
+file (e.g. from submodules, or a linked worktree), the .git location
+would be the final location where the .git directory is, not where the
+.git file is.
++
+The pattern can contain standard globbing wildcards and two additional
+ones, `**/` and `/**`, that can match multiple path components. Please
+refer to linkgit:gitignore[5] for details. For convenience:
+
+ * If the pattern starts with `~/`, `~` will be substituted with the
+   content of the environment variable `HOME`.
+
+ * If the pattern starts with `./`, it is replaced with the directory
+   containing the current config file.
+
+ * If the pattern does not start with either `~/`, `./` or `/`, `**/`
+   will be automatically prepended. For example, the pattern `foo/bar`
+   becomes `**/foo/bar` and would match `/any/path/to/foo/bar`.
+
+ * If the pattern ends with `/`, `**` will be automatically added. For
+   example, the pattern `foo/` becomes `foo/**`. In other words, it
+   matches "foo" and everything inside, recursively.
+
+`gitdir/i`::
+	This is the same as `gitdir` except that matching is done
+	case-insensitively (e.g. on case-insensitive file sytems)
+
+`onbranch`::
+	The data that follows the keyword `onbranch:` is taken to be a
+	pattern with standard globbing wildcards and two additional
+	ones, `**/` and `/**`, that can match multiple path components.
+	If we are in a worktree where the name of the branch that is
+	currently checked out matches the pattern, the include condition
+	is met.
++
+If the pattern ends with `/`, `**` will be automatically added. For
+example, the pattern `foo/` becomes `foo/**`. In other words, it matches
+all branches that begin with `foo/`. This is useful if your branches are
+organized hierarchically and you would like to apply a configuration to
+all the branches in that hierarchy.
+
+A few more notes on matching via `gitdir` and `gitdir/i`:
+
+ * Symlinks in `$GIT_DIR` are not resolved before matching.
+
+ * Both the symlink & realpath versions of paths will be matched
+   outside of `$GIT_DIR`. E.g. if ~/git is a symlink to
+   /mnt/storage/git, both `gitdir:~/git` and `gitdir:/mnt/storage/git`
+   will match.
++
+This was not the case in the initial release of this feature in
+v2.13.0, which only matched the realpath version. Configuration that
+wants to be compatible with the initial release of this feature needs
+to either specify only the realpath version, or both versions.
+
+ * Note that "../" is not special and will match literally, which is
+   unlikely what you want.
+
+Example
+~~~~~~~
+
+	# Core variables
+	[core]
+		; Don't trust file modes
+		filemode = false
+
+	# Our diff algorithm
+	[diff]
+		external = /usr/local/bin/diff-wrapper
+		renames = true
+
+	[branch "devel"]
+		remote = origin
+		merge = refs/heads/devel
+
+	# Proxy settings
+	[core]
+		gitProxy="ssh" for "kernel.org"
+		gitProxy=default-proxy ; for the rest
+
+	[include]
+		path = /path/to/foo.inc ; include by absolute path
+		path = foo.inc ; find "foo.inc" relative to the current file
+		path = ~/foo.inc ; find "foo.inc" in your `$HOME` directory
+
+	; include if $GIT_DIR is /path/to/foo/.git
+	[includeIf "gitdir:/path/to/foo/.git"]
+		path = /path/to/foo.inc
+
+	; include for all repositories inside /path/to/group
+	[includeIf "gitdir:/path/to/group/"]
+		path = /path/to/foo.inc
+
+	; include for all repositories inside $HOME/to/group
+	[includeIf "gitdir:~/to/group/"]
+		path = /path/to/foo.inc
+
+	; relative paths are always relative to the including
+	; file (if the condition is true); their location is not
+	; affected by the condition
+	[includeIf "gitdir:/path/to/group/"]
+		path = foo.inc
+
+	; include only if we are in a worktree where foo-branch is
+	; currently checked out
+	[includeIf "onbranch:foo-branch"]
+		path = foo.inc
+
+Values
+~~~~~~
+
+Values of many variables are treated as a simple string, but there
+are variables that take values of specific types and there are rules
+as to how to spell them.
+
+boolean::
+
+       When a variable is said to take a boolean value, many
+       synonyms are accepted for 'true' and 'false'; these are all
+       case-insensitive.
+
+	true;; Boolean true literals are `yes`, `on`, `true`,
+		and `1`.  Also, a variable defined without `= <value>`
+		is taken as true.
+
+	false;; Boolean false literals are `no`, `off`, `false`,
+		`0` and the empty string.
++
+When converting a value to its canonical form using the `--type=bool` type
+specifier, 'git config' will ensure that the output is "true" or
+"false" (spelled in lowercase).
+
+integer::
+       The value for many variables that specify various sizes can
+       be suffixed with `k`, `M`,... to mean "scale the number by
+       1024", "by 1024x1024", etc.
+
+color::
+       The value for a variable that takes a color is a list of
+       colors (at most two, one for foreground and one for background)
+       and attributes (as many as you want), separated by spaces.
++
+The basic colors accepted are `normal`, `black`, `red`, `green`, `yellow`,
+`blue`, `magenta`, `cyan` and `white`.  The first color given is the
+foreground; the second is the background.
++
+Colors may also be given as numbers between 0 and 255; these use ANSI
+256-color mode (but note that not all terminals may support this).  If
+your terminal supports it, you may also specify 24-bit RGB values as
+hex, like `#ff0ab3`.
++
+The accepted attributes are `bold`, `dim`, `ul`, `blink`, `reverse`,
+`italic`, and `strike` (for crossed-out or "strikethrough" letters).
+The position of any attributes with respect to the colors
+(before, after, or in between), doesn't matter. Specific attributes may
+be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`,
+`no-ul`, etc).
++
+An empty color string produces no color effect at all. This can be used
+to avoid coloring specific elements without disabling color entirely.
++
+For git's pre-defined color slots, the attributes are meant to be reset
+at the beginning of each item in the colored output. So setting
+`color.decorate.branch` to `black` will paint that branch name in a
+plain `black`, even if the previous thing on the same output line (e.g.
+opening parenthesis before the list of branch names in `log --decorate`
+output) is set to be painted with `bold` or some other attribute.
+However, custom log formats may do more complicated and layered
+coloring, and the negated forms may be useful there.
+
+pathname::
+	A variable that takes a pathname value can be given a
+	string that begins with "`~/`" or "`~user/`", and the usual
+	tilde expansion happens to such a string: `~/`
+	is expanded to the value of `$HOME`, and `~user/` to the
+	specified user's home directory.
+
+
+Variables
+~~~~~~~~~
+
+Note that this list is non-comprehensive and not necessarily complete.
+For command-specific variables, you will find a more detailed description
+in the appropriate manual page.
+
+Other git-related tools may and do use their own variables.  When
+inventing new variables for use in your own tool, make sure their
+names do not conflict with those that are used by Git itself and
+other popular tools, and describe them in your documentation.
+
+include::config/advice.txt[]
+
+include::config/core.txt[]
+
+include::config/add.txt[]
+
+include::config/alias.txt[]
+
+include::config/am.txt[]
+
+include::config/apply.txt[]
+
+include::config/blame.txt[]
+
+include::config/branch.txt[]
+
+include::config/browser.txt[]
+
+include::config/checkout.txt[]
+
+include::config/clean.txt[]
+
+include::config/color.txt[]
+
+include::config/column.txt[]
+
+include::config/commit.txt[]
+
+include::config/credential.txt[]
+
+include::config/completion.txt[]
+
+include::config/diff.txt[]
+
+include::config/difftool.txt[]
+
+include::config/fastimport.txt[]
+
+include::config/fetch.txt[]
+
+include::config/format.txt[]
+
+include::config/filter.txt[]
+
+include::config/fsck.txt[]
+
+include::config/gc.txt[]
+
+include::config/gitcvs.txt[]
+
+include::config/gitweb.txt[]
+
+include::config/grep.txt[]
+
+include::config/gpg.txt[]
+
+include::config/gui.txt[]
+
+include::config/guitool.txt[]
+
+include::config/help.txt[]
+
+include::config/http.txt[]
+
+include::config/i18n.txt[]
+
+include::config/imap.txt[]
+
+include::config/index.txt[]
+
+include::config/init.txt[]
+
+include::config/instaweb.txt[]
+
+include::config/interactive.txt[]
+
+include::config/log.txt[]
+
+include::config/mailinfo.txt[]
+
+include::config/mailmap.txt[]
+
+include::config/man.txt[]
+
+include::config/merge.txt[]
+
+include::config/mergetool.txt[]
+
+include::config/notes.txt[]
+
+include::config/pack.txt[]
+
+include::config/pager.txt[]
+
+include::config/pretty.txt[]
+
+include::config/protocol.txt[]
+
+include::config/pull.txt[]
+
+include::config/push.txt[]
+
+include::config/rebase.txt[]
+
+include::config/receive.txt[]
+
+include::config/remote.txt[]
+
+include::config/remotes.txt[]
+
+include::config/repack.txt[]
+
+include::config/rerere.txt[]
+
+include::config/reset.txt[]
+
+include::config/sendemail.txt[]
+
+include::config/sequencer.txt[]
+
+include::config/showbranch.txt[]
+
+include::config/splitindex.txt[]
+
+include::config/ssh.txt[]
+
+include::config/status.txt[]
+
+include::config/stash.txt[]
+
+include::config/submodule.txt[]
+
+include::config/tag.txt[]
+
+include::config/trace2.txt[]
+
+include::config/transfer.txt[]
+
+include::config/uploadarchive.txt[]
+
+include::config/uploadpack.txt[]
+
+include::config/url.txt[]
+
+include::config/user.txt[]
+
+include::config/versionsort.txt[]
+
+include::config/web.txt[]
+
+include::config/worktree.txt[]