chore(users): remove inactive users r/6732

Change-Id: I3cfb425e4dac0a467e3917df996e9800a3ebe875
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9576
Reviewed-by: isomer <isomer@tvl.fyi>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>

23 files changed, 0 insertions, 425 deletions

diff --git a/users/riking/OWNERS b/users/riking/OWNERS
deleted file mode 100644
index 34c668e2fbf5..000000000000
--- a/users/riking/OWNERS
+++ /dev/null
@@ -1 +0,0 @@
-riking
diff --git a/users/riking/adventofcode-2020/.gitignore b/users/riking/adventofcode-2020/.gitignore
deleted file mode 100644
index 076ff412156a..000000000000
--- a/users/riking/adventofcode-2020/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-*/target
-*/input.txt
diff --git a/users/riking/adventofcode-2020/day01/Cargo.lock b/users/riking/adventofcode-2020/day01/Cargo.lock
deleted file mode 100644
index a1a18948a7ea..000000000000
--- a/users/riking/adventofcode-2020/day01/Cargo.lock
+++ /dev/null
@@ -1,14 +0,0 @@
-# This file is automatically @generated by Cargo.
-# It is not intended for manual editing.
-[[package]]
-name = "anyhow"
-version = "1.0.34"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "bf8dcb5b4bbaa28653b647d8c77bd4ed40183b48882e130c1f1ffb73de069fd7"
-
-[[package]]
-name = "day01"
-version = "0.1.0"
-dependencies = [
- "anyhow",
-]
diff --git a/users/riking/adventofcode-2020/day01/Cargo.toml b/users/riking/adventofcode-2020/day01/Cargo.toml
deleted file mode 100644
index d90ab548bb7b..000000000000
--- a/users/riking/adventofcode-2020/day01/Cargo.toml
+++ /dev/null
@@ -1,10 +0,0 @@
-[package]
-name = "day01"
-version = "0.1.0"
-authors = ["Kane York <kanepyork@gmail.com>"]
-edition = "2018"
-
-# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
-
-[dependencies]
-anyhow = "1.0.34"
diff --git a/users/riking/adventofcode-2020/day01/default.nix b/users/riking/adventofcode-2020/day01/default.nix
deleted file mode 100644
index 946069e3a68e..000000000000
--- a/users/riking/adventofcode-2020/day01/default.nix
+++ /dev/null
@@ -1,10 +0,0 @@
-{ depot, ... }:
-
-with depot.third_party;
-
-naersk.buildPackage {
-  src = ./.;
-
-  buildInputs = [ ];
-  doCheck = true;
-}
diff --git a/users/riking/adventofcode-2020/day01/src/main.rs b/users/riking/adventofcode-2020/day01/src/main.rs
deleted file mode 100644
index e8bc2a05e45a..000000000000
--- a/users/riking/adventofcode-2020/day01/src/main.rs
+++ /dev/null
@@ -1,85 +0,0 @@
-use anyhow::anyhow;
-use std::fs::File;
-use std::io::prelude::*;
-use std::io::BufReader;
-
-const PART_2: bool = true;
-
-fn day01(is_part2: bool, numbers: &Vec<i64>) -> Result<String, anyhow::Error> {
-    // println!("{:?}", numbers);
-
-    for n1 in numbers.iter() {
-        for n2 in numbers.iter() {
-            if is_part2 {
-                for n3 in numbers.iter() {
-                    if n1 + n2 + n3 == 2020 {
-                        return Ok((n1 * n2 * n3).to_string());
-                    }
-                }
-            } else {
-                if n1 + n2 == 2020 {
-                    return Ok((n1 * n2).to_string());
-                }
-            }
-        }
-    }
-
-    Err(anyhow!("no solution found"))
-}
-
-fn parse(filename: &str) -> Result<Vec<i64>, anyhow::Error> {
-    let f = File::open(filename)?;
-    let mut reader = BufReader::new(f);
-
-    let mut values = Vec::<i64>::new();
-
-    let mut line = String::new();
-    loop {
-        line.clear();
-        reader.read_line(&mut line)?;
-        let trimmed_line = line.trim();
-        if trimmed_line.is_empty() {
-            break;
-        }
-
-        values.push(trimmed_line.parse()?);
-    }
-    Ok(values)
-}
-
-fn main() -> anyhow::Result<()> {
-    let args: Vec<String> = std::env::args().collect();
-
-    // println!("{:?}", args);
-    if args.len() != 2 {
-        return Err(anyhow!("usage: day01 input_file"));
-    }
-    let filename = args.into_iter().skip(1).next().expect("args len == 1");
-
-    let numbers = parse(&filename)?;
-
-    println!("{}", day01(PART_2, &numbers)?);
-
-    Ok(())
-}
-
-#[cfg(test)]
-mod tests {
-    use super::day01;
-
-    #[test]
-    fn test_part1() {
-        let vec = vec![1721, 979, 366, 299, 675, 1456];
-        let result = day01(false, &vec).unwrap();
-
-        assert_eq!(result, 514579.to_string());
-    }
-
-    #[test]
-    fn test_part2() {
-        let vec = vec![1721, 979, 366, 299, 675, 1456];
-        let result = day01(true, &vec).unwrap();
-
-        assert_eq!(result, 241861950.to_string());
-    }
-}
diff --git a/users/riking/dotfiles/.mybashrc b/users/riking/dotfiles/.mybashrc
deleted file mode 100644
index c5ebc34a1f4f..000000000000
--- a/users/riking/dotfiles/.mybashrc
+++ /dev/null
@@ -1,53 +0,0 @@
-
-# BEGIN: __USER_FUNCTIONS__
-function gh-clone() {
-	if [[ "x$2" == "x" ]]; then
-		IFS='/' read -ra PARTS <<< "$1"
-		user="${PARTS[0]}"
-		repo="${PARTS[1]}"
-	else
-		user="$1"
-		repo="$2"
-	fi
-	if [[ -d ~/go/src/github.com/"$user"/"$repo" ]]; then
-		cd ~/go/src/github.com/"${user}"/"${repo}"
-		return 0
-	fi
-	mkdir -p ~/go/src/github.com/"${user}"
-	cd ~/go/src/github.com/"${user}"
-	git clone git@github.com:"${user}"/"${repo}".git
-	cd ~/go/src/github.com/"${user}"/"${repo}"
-}
-
-function download() {
-	cd "${HOME}/Downloads"
-	wget "$@"
-}
-
-# todo: only one password pls
-function prodaccess() {
-	(ssh-add -L | grep -q 'ZgEu6S3SLatYN') || ssh-add "$HOME"/.ssh/id_ed25519
-	(ssh-add -L | grep -q 'Gfh2S3kUwZ8A6') || ssh-add "$HOME"/.ssh/id_rsa.discourse
-	echo "signing test" | gpg --clearsign > /dev/null
-}
-
-function reset-audio() {
-	pulseaudio -k && sudo alsa force-reload
-}
-
-function tvl-push() {
-	git push origin HEAD:refs/for/canon
-}
-
-# END: __USER_FUNCTIONS__
-
-# BEGIN: __USER_ENV__
-GOPATH=$HOME/go
-CDPATH=$HOME/go/src
-export GPG_TTY="$(tty)"
-
-export PATH="/usr/local/go/bin:$HOME/go/bin:$HOME/.rbenv/bin:$PATH"
-
-eval "$(rbenv init -)"
-# END: __USER_ENV__
-
diff --git a/users/riking/dotfiles/fish/conf.d/nix-env.fish b/users/riking/dotfiles/fish/conf.d/nix-env.fish
deleted file mode 100644
index 6f79f9752855..000000000000
--- a/users/riking/dotfiles/fish/conf.d/nix-env.fish
+++ /dev/null
@@ -1,141 +0,0 @@
-# SPDX-License-Identifier: Unlicense
-# https://raw.githubusercontent.com/lilyball/nix-env.fish/master/conf.d/nix-env.fish
-
-# Setup Nix
-
-# We need to distinguish between single-user and multi-user installs.
-# This is difficult because there's no official way to do this.
-# We could look for the presence of /nix/var/nix/daemon-socket/socket but this will fail if the
-# daemon hasn't started yet. /nix/var/nix/daemon-socket will exist if the daemon has ever run, but
-# I don't think there's any protection against accidentally running `nix-daemon` as a user.
-# We also can't just look for /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh because
-# older single-user installs used the default profile instead of a per-user profile.
-# We can still check for it first, because all multi-user installs should have it, and so if it's
-# not present that's a pretty big indicator that this is a single-user install. If it does exist,
-# we still need to verify the install type. To that end we'll look for a root owner and sticky bit
-# on /nix/store. Multi-user installs set both, single-user installs don't. It's certainly possible
-# someone could do a single-user install as root and then manually set the sticky bit but that
-# would be extremely unusual.
-
-set -l nix_profile_path /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
-set -l single_user_profile_path ~/.nix-profile/etc/profile.d/nix.sh
-if test -e $nix_profile_path
-  # The path exists. Double-check that this is a multi-user install.
-  # We can't just check for ~/.nix-profile/… because this may be a single-user install running as
-  # the wrong user.
-
-  # stat is not portable. Splitting the output of ls -nd is reliable on most platforms.
-  set -l owner (string split -n ' ' (ls -nd /nix/store 2>/dev/null))[3]
-  if not test -k /nix/store -a $owner -eq 0
-    # /nix/store is either not owned by root or not sticky. Assume single-user.
-    set nix_profile_path $single_user_profile_path
-  end
-else
-  # The path doesn't exist. Assume single-user
-  set nix_profile_path $single_user_profile_path
-end
-
-if test -e $nix_profile_path
-  # Source the nix setup script
-  # We're going to run the regular Nix profile under bash and then print out a few variables
-  for line in (env -u BASH_ENV bash -c '. "$0"; for name in PATH "${!NIX_@}"; do printf "%s=%s\0" "$name" "${!name}"; done' $nix_profile_path | string split0)
-    set -xg (string split -m 1 = $line)
-  end
-
-  # Insert Nix's fish share directories into fish's special variables.
-  # nixpkgs-installed fish tries to set these up already if NIX_PROFILES is defined, which won't
-  # be the case when sourcing $__fish_data_dir/share/config.fish normally, but might be for a
-  # recursive invocation. To guard against that, we'll only insert paths that don't already exit.
-  # Furthermore, for the vendor_conf.d sourcing, we'll use the pre-existing presence of a path in
-  # $fish_function_path to determine whether we want to source the relevant vendor_conf.d folder.
-
-  # To start, let's locally define NIX_PROFILES if it doesn't already exist.
-  set -al NIX_PROFILES
-  if test (count $NIX_PROFILES) -eq 0
-    set -a NIX_PROFILES $HOME/.nix-profile
-  end
-  # Replicate the logic from nixpkgs version of $__fish_data_dir/__fish_build_paths.fish.
-  set -l __nix_profile_paths (string split ' ' -- $NIX_PROFILES)[-1..1]
-  set -l __extra_completionsdir \
-    $__nix_profile_paths/etc/fish/completions \
-    $__nix_profile_paths/share/fish/vendor_completions.d
-  set -l __extra_functionsdir \
-    $__nix_profile_paths/etc/fish/functions \
-    $__nix_profile_paths/share/fish/vendor_functions.d
-  set -l __extra_confdir \
-    $__nix_profile_paths/etc/fish/conf.d \
-    $__nix_profile_paths/share/fish/vendor_conf.d \
-
-  ### Configure fish_function_path ###
-  # Remove any of our extra paths that may already exist.
-  # Record the equivalent __extra_confdir path for any function path that exists.
-  set -l existing_conf_paths
-  for path in $__extra_functionsdir
-    if set -l idx (contains --index -- $path $fish_function_path)
-      set -e fish_function_path[$idx]
-      set -a existing_conf_paths $__extra_confdir[(contains --index -- $path $__extra_functionsdir)]
-    end
-  end
-  # Insert the paths before $__fish_data_dir.
-  if set -l idx (contains --index -- $__fish_data_dir/functions $fish_function_path)
-    # Fish has no way to simply insert into the middle of an array.
-    set -l new_path $fish_function_path[1..$idx]
-    set -e new_path[$idx]
-    set -a new_path $__extra_functionsdir
-    set fish_function_path $new_path $fish_function_path[$idx..-1]
-  else
-    set -a fish_function_path $__extra_functionsdir
-  end
-
-  ### Configure fish_complete_path ###
-  # Remove any of our extra paths that may already exist.
-  for path in $__extra_completionsdir
-    if set -l idx (contains --index -- $path $fish_complete_path)
-      set -e fish_complete_path[$idx]
-    end
-  end
-  # Insert the paths before $__fish_data_dir.
-  if set -l idx (contains --index -- $__fish_data_dir/completions $fish_complete_path)
-    set -l new_path $fish_complete_path[1..$idx]
-    set -e new_path[$idx]
-    set -a new_path $__extra_completionsdir
-    set fish_complete_path $new_path $fish_complete_path[$idx..-1]
-  else
-    set -a fish_complete_path $__extra_completionsdir
-  end
-
-  ### Source conf directories ###
-  # The built-in directories were already sourced during shell initialization.
-  # Any __extra_confdir that came from $__fish_data_dir/__fish_build_paths.fish was also sourced.
-  # As explained above, we're using the presence of pre-existing paths in $fish_function_path as a
-  # signal that the corresponding conf dir has also already been sourced.
-  # In order to simulate this, we'll run through the same algorithm as found in
-  # $__fish_data_dir/config.fish except we'll avoid sourcing the file if it comes from an
-  # already-sourced location.
-  # Caveats:
-  # * Files will be sourced in a different order than we'd ideally do (because we're coming in
-  #   after the fact to source them).
-  # * If there are existing extra conf paths, files in them may have been sourced that should have
-  #   been suppressed by paths we're inserting in front.
-  # * Similarly any files in $__fish_data_dir/vendor_conf.d that should have been suppressed won't
-  #   have been.
-  set -l sourcelist
-  for file in $__fish_config_dir/conf.d/*.fish $__fish_sysconf_dir/conf.d/*.fish
-    # We know these paths were sourced already. Just record them.
-    set -l basename (string replace -r '^.*/' '' -- $file)
-    contains -- $basename $sourcelist
-    or set -a sourcelist $basename
-  end
-  for root in $__extra_confdir
-    for file in $root/*.fish
-      set -l basename (string replace -r '^.*/' '' -- $file)
-      contains -- $basename $sourcelist
-      and continue
-      set -a sourcelist $basename
-      contains -- $root $existing_conf_paths
-      and continue # this is a pre-existing path, it will have been sourced already
-      [ -f $file -a -r $file ]
-      and source $file
-    end
-  end
-end
diff --git a/users/riking/dotfiles/fish/config.fish b/users/riking/dotfiles/fish/config.fish
deleted file mode 100644
index c2454762bddf..000000000000
--- a/users/riking/dotfiles/fish/config.fish
+++ /dev/null
@@ -1,8 +0,0 @@
-set -gx GOPATH "$HOME/go"
-set -gx GPG_TTY (tty)
-set -gx DEPOT_ROOT "$GOPATH/src/code.tvl.fyi"
-
-set -gx PATH '/usr/local/go/bin' "$HOME/.cargo/bin" "$HOME/.rbenv/bin" $PATH
-status --is-interactive; and rbenv init - | source
-source ~/.opsrc.fish # work
-set -gx PATH "$HOME/go/bin" $PATH
diff --git a/users/riking/dotfiles/fish/fish_variables b/users/riking/dotfiles/fish/fish_variables
deleted file mode 100644
index fa8bff919f40..000000000000
--- a/users/riking/dotfiles/fish/fish_variables
+++ /dev/null
@@ -1,32 +0,0 @@
-# This file contains fish universal variable definitions.
-# VERSION: 3.0
-SETUVAR __fish_initialized:3100
-SETUVAR fish_color_autosuggestion:555\x1ebrblack
-SETUVAR fish_color_cancel:\x2dr
-SETUVAR fish_color_command:005fd7
-SETUVAR fish_color_comment:990000
-SETUVAR fish_color_cwd:green
-SETUVAR fish_color_cwd_root:red
-SETUVAR fish_color_end:009900
-SETUVAR fish_color_error:ff0000
-SETUVAR fish_color_escape:00a6b2
-SETUVAR fish_color_history_current:\x2d\x2dbold
-SETUVAR fish_color_host:normal
-SETUVAR fish_color_host_remote:yellow
-SETUVAR fish_color_match:\x2d\x2dbackground\x3dbrblue
-SETUVAR fish_color_normal:normal
-SETUVAR fish_color_operator:00a6b2
-SETUVAR fish_color_param:00afff
-SETUVAR fish_color_quote:999900
-SETUVAR fish_color_redirection:00afff
-SETUVAR fish_color_search_match:bryellow\x1e\x2d\x2dbackground\x3dbrblack
-SETUVAR fish_color_selection:white\x1e\x2d\x2dbold\x1e\x2d\x2dbackground\x3dbrblack
-SETUVAR fish_color_status:red
-SETUVAR fish_color_user:brgreen
-SETUVAR fish_color_valid_path:\x2d\x2dunderline
-SETUVAR fish_greeting:Welcome\x20to\x20fish\x2c\x20the\x20friendly\x20interactive\x20shell\x0aType\x20\x60help\x60\x20for\x20instructions\x20on\x20how\x20to\x20use\x20fish
-SETUVAR fish_key_bindings:fish_default_key_bindings
-SETUVAR fish_pager_color_completion:\x1d
-SETUVAR fish_pager_color_description:B3A06D\x1eyellow
-SETUVAR fish_pager_color_prefix:white\x1e\x2d\x2dbold\x1e\x2d\x2dunderline
-SETUVAR fish_pager_color_progress:brwhite\x1e\x2d\x2dbackground\x3dcyan
diff --git a/users/riking/dotfiles/fish/functions/ddate.fish b/users/riking/dotfiles/fish/functions/ddate.fish
deleted file mode 100644
index 8152d31680e7..000000000000
--- a/users/riking/dotfiles/fish/functions/ddate.fish
+++ /dev/null
@@ -1,3 +0,0 @@
-function ddate --description 'current date in Discourse format'
-    TZ=UTC date '+[date=%Y-%m-%d time=%H:%M:%S timezone=\"%Z\"]'
-end
diff --git a/users/riking/dotfiles/fish/functions/gh-clone.fish b/users/riking/dotfiles/fish/functions/gh-clone.fish
deleted file mode 100644
index 109ec353f6db..000000000000
--- a/users/riking/dotfiles/fish/functions/gh-clone.fish
+++ /dev/null
@@ -1,18 +0,0 @@
-function gh-clone --description 'Clone and CD to a github repository'
-    if test (count $argv) -eq 1
-        set user (string split "/" -- $argv[1])[1]
-        set repo (string split "/" -- $argv[1])[2]
-    else
-        set user $argv[1]
-        set repo $argv[2]
-    end
-
-    if test -d "$HOME/go/src/github.com/$user/$repo"
-        cd "$HOME/go/src/github.com/$user/$repo"
-        return 0
-    end
-    mkdir -p "$HOME/go/src/github.com/$user"
-    cd "$HOME/go/src/github.com/$user"
-    git clone "git@github.com:$user/$repo.git"
-    cd "$HOME/go/src/github.com/$user/$repo"
-end
diff --git a/users/riking/dotfiles/fish/functions/prodaccess.fish b/users/riking/dotfiles/fish/functions/prodaccess.fish
deleted file mode 100644
index 876c14c5e31e..000000000000
--- a/users/riking/dotfiles/fish/functions/prodaccess.fish
+++ /dev/null
@@ -1,6 +0,0 @@
-function prodaccess
-    ssh-add "$HOME/.ssh/id_ecdsa_sk"
-    begin; ssh-add -L | grep -q 'ZgEu6S3SLatYN'; end || ssh-add "$HOME"/.ssh/id_ed25519
-    begin; ssh-add -L | grep -q 'Gfh2S3kUwZ8A6'; end || ssh-add "$HOME"/.ssh/id_rsa.discourse
-    echo "signing test" | gpg --clearsign > /dev/null
-end
diff --git a/users/riking/dotfiles/fish/functions/reset-audio.fish b/users/riking/dotfiles/fish/functions/reset-audio.fish
deleted file mode 100644
index eb48578a52bc..000000000000
--- a/users/riking/dotfiles/fish/functions/reset-audio.fish
+++ /dev/null
@@ -1,4 +0,0 @@
-function reset-audio --description "Resets pulse and alsa"
-    pulseaudio -k
-    sudo alsa force-reload
-end
diff --git a/users/riking/dotfiles/fish/functions/tvl-push.fish b/users/riking/dotfiles/fish/functions/tvl-push.fish
deleted file mode 100644
index f04ac830c005..000000000000
--- a/users/riking/dotfiles/fish/functions/tvl-push.fish
+++ /dev/null
@@ -1,3 +0,0 @@
-function tvl-push
-    git push origin HEAD:refs/for/canon
-end
diff --git a/users/riking/dotfiles/regolith/Xresources b/users/riking/dotfiles/regolith/Xresources
deleted file mode 100644
index f47b93511af0..000000000000
--- a/users/riking/dotfiles/regolith/Xresources
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "/etc/regolith/styles/ubuntu/root"
-
-i3-wm.program.lock: xset s activate
-i3-wm.program.1: /bin/sh $HOME/.config/regolith/initrc
-
diff --git a/users/riking/dotfiles/regolith/flags/first-time-setup-r1-4-1 b/users/riking/dotfiles/regolith/flags/first-time-setup-r1-4-1
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/users/riking/dotfiles/regolith/flags/first-time-setup-r1-4-1
+++ /dev/null
diff --git a/users/riking/dotfiles/regolith/flags/show-shortcuts b/users/riking/dotfiles/regolith/flags/show-shortcuts
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/users/riking/dotfiles/regolith/flags/show-shortcuts
+++ /dev/null
diff --git a/users/riking/dotfiles/regolith/flags/term-profile b/users/riking/dotfiles/regolith/flags/term-profile
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/users/riking/dotfiles/regolith/flags/term-profile
+++ /dev/null
diff --git a/users/riking/dotfiles/regolith/flags/ui-fingerprint b/users/riking/dotfiles/regolith/flags/ui-fingerprint
deleted file mode 100644
index b35aedd2dc0f..000000000000
--- a/users/riking/dotfiles/regolith/flags/ui-fingerprint
+++ /dev/null
@@ -1 +0,0 @@
-ec33ee15ff705ac4b167ba6b7f6df3c2
diff --git a/users/riking/dotfiles/regolith/initrc b/users/riking/dotfiles/regolith/initrc
deleted file mode 100755
index 9b14613cd4eb..000000000000
--- a/users/riking/dotfiles/regolith/initrc
+++ /dev/null
@@ -1,3 +0,0 @@
-
-xset s 900 5
-( xss-lock -n /usr/lib/xsecurelock/dimmer -l -- sh -c "XSECURELOCK_PASSWORD_PROMPT=time_hex XSECURELOCK_SHOW_DATETIME=1 XSECURELOCK_SAVER=saver_mpv XSECURELOCK_IMAGE_DURATION_SECONDS=10 XSECURELOCK_LIST_VIDEOS_COMMAND='find ~/Videos/Screensaver -type f' xsecurelock" )&
diff --git a/users/riking/dotfiles/tmux.conf b/users/riking/dotfiles/tmux.conf
deleted file mode 100644
index 1f253cb27f0c..000000000000
--- a/users/riking/dotfiles/tmux.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-
-set -g mouse on
-set-option -g prefix C-a
-bind-key C-a send-prefix
-bind | split-window -h
-bind - split-window -v
diff --git a/users/riking/keys.nix b/users/riking/keys.nix
deleted file mode 100644
index 50287098244a..000000000000
--- a/users/riking/keys.nix
+++ /dev/null
@@ -1,20 +0,0 @@
-# SSH public keys
-{ ... }:
-
-rec {
-  sk-ecljg09 = "sk-ecdsa-sha2-nistp256@openssh.com AAAAInNrLWVjZHNhLXNoYTItbmlzdHAyNTZAb3BlbnNzaC5jb20AAAAIbmlzdHAyNTYAAABBBBwJ7dJJUkvIK+bDsVsCsCZSlbs90aOLsHN7XesC8/AmLA5rIRLO8I5ADoOjsWAXl/WAgxqOMmB4LxZjoXWa1a0AAAAEc3NoOg== riking@sk-ECLJG09";
-  sk-portable1 = "sk-ecdsa-sha2-nistp256@openssh.com AAAAInNrLWVjZHNhLXNoYTItbmlzdHAyNTZAb3BlbnNzaC5jb20AAAAIbmlzdHAyNTYAAABBBCfA8/0nKk4jXclWHjRZIuicPeyIo9oDwahpnWjEATr7YaFDAo632KTSgqlW0lpx8lX9alLsJRhFV2XaSurYw/EAAAAEc3NoOg== riking@sk-portable1";
-  sk-portable2 = "sk-ecdsa-sha2-nistp256@openssh.com AAAAInNrLWVjZHNhLXNoYTItbmlzdHAyNTZAb3BlbnNzaC5jb20AAAAIbmlzdHAyNTYAAABBBEX3DXreQR93SR68QZHTdaVd5RjlRM8C0jcZ4kI4OZwqk7xuk68w3g22q2OM7O+chj+n1N3u0hLxi82QfRnwyasAAAAEc3NoOg== riking@sk-portable2";
-  sk-desktop = "sk-ecdsa-sha2-nistp256@openssh.com AAAAInNrLWVjZHNhLXNoYTItbmlzdHAyNTZAb3BlbnNzaC5jb20AAAAIbmlzdHAyNTYAAABBBB+JvN8nAxD+yo49Ohf/UDq7Z049yvkURJIA1XNbvKaAkvfWnCN5m9vTC1FyGxTyCwy4QpD1pFP5fIn0X/kvvfgAAAAEc3NoOg== riking@sk-kane-DAN-A4";
-
-  u2f = [ sk-ecljg09 sk-portable1 sk-portable2 sk-desktop ];
-
-  ed1 = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAjWIfFH2bAWMZG+HudV1MVHWUl83M/ZgEu6S3SLatYN riking@kane-DAN-A4";
-  ed2 = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICBblB4C9IgAijv+qN6Zs8TM2Sz7phQvVmRrcDn4VYNo riking@ECLJG09";
-
-  passworded = [ ed1 ed2 ];
-
-  unprotected = [ ];
-
-  all = u2f ++ passworded ++ unprotected;
-}