chore(tvix/store/protof): buf format r/7150

Change-Id: I29b0fb62aa849ee01860dc7fe3dbba9b941ca172
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10238
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>

3 files changed, 138 insertions, 138 deletions

diff --git a/tvix/store/protos/default.nix b/tvix/store/protos/default.nix
index 5f56eda79b3d..b5f1e232eab6 100644
--- a/tvix/store/protos/default.nix
+++ b/tvix/store/protos/default.nix
@@ -25,6 +25,7 @@
     buildPhase = ''
       export HOME=$TMPDIR
       buf lint
+      buf format -d --exit-code
       buf generate
 
       mkdir -p $out
diff --git a/tvix/store/protos/pathinfo.proto b/tvix/store/protos/pathinfo.proto
index 556219e3d422..b03e7e938e33 100644
--- a/tvix/store/protos/pathinfo.proto
+++ b/tvix/store/protos/pathinfo.proto
@@ -11,27 +11,27 @@ option go_package = "code.tvl.fyi/tvix/store-go;storev1";
 // PathInfo shows information about a Nix Store Path.
 // That's a single element inside /nix/store.
 message PathInfo {
-    // The path can be a directory, file or symlink.
-    tvix.castore.v1.Node node = 1;
+  // The path can be a directory, file or symlink.
+  tvix.castore.v1.Node node = 1;
 
-    // List of references (output path hashes)
-    // This really is the raw *bytes*, after decoding nixbase32, and not a
-    // base32-encoded string.
-    repeated bytes references = 2;
+  // List of references (output path hashes)
+  // This really is the raw *bytes*, after decoding nixbase32, and not a
+  // base32-encoded string.
+  repeated bytes references = 2;
 
-    // see below.
-    NARInfo narinfo = 3;
+  // see below.
+  NARInfo narinfo = 3;
 }
 
 // Represents a path in the Nix store (a direct child of STORE_DIR).
 // It is commonly formatted by a nixbase32-encoding the digest, and
 // concatenating the name, separated by a `-`.
 message StorePath {
-    // The string after digest and `-`.
-    string name = 1;
+  // The string after digest and `-`.
+  string name = 1;
 
-    // The digest (20 bytes).
-    bytes digest = 2;
+  // The digest (20 bytes).
+  bytes digest = 2;
 }
 
 // Nix C++ uses NAR (Nix Archive) as a format to transfer store paths,
@@ -44,85 +44,85 @@ message StorePath {
 // moving to another signature scheme is desired.
 // Even then, it still makes sense to hold this data, for old clients.
 message NARInfo {
-    // This represents a (parsed) signature line in a .narinfo file.
-    message Signature {
-        string name = 1;
-        bytes data = 2;
-    };
-
-    // This size of the NAR file, in bytes.
-    uint64 nar_size = 1;
-
-    // The sha256 of the NAR file representation.
-    bytes nar_sha256 = 2;
-
-    // The signatures in a .narinfo file.
-    repeated Signature signatures = 3;
-
-    // A list of references. To validate .narinfo signatures, a fingerprint
-    // needs to be constructed.
-    // This fingerprint doesn't just contain the hashes of the output paths of
-    // all references (like PathInfo.references), but their whole (base)names,
-    // so we need to keep them somewhere.
-    repeated string reference_names = 4;
-
-    // The StorePath of the .drv file producing this output.
-    // The .drv suffix is omitted in its `name` field.
-    StorePath deriver = 5;
-
-    // The CA field in the .narinfo.
-    // Its textual representations seen in the wild are one of the following:
-    //  - `fixed:r:sha256:1gcky5hlf5vqfzpyhihydmm54grhc94mcs8w7xr8613qsqb1v2j6`
-    //    fixed-output derivations using "recursive" `outputHashMode`.
-    //  - `fixed:sha256:19xqkh72crbcba7flwxyi3n293vav6d7qkzkh2v4zfyi4iia8vj8
-    //    fixed-output derivations using "flat" `outputHashMode`
-    //  - `text:sha256:19xqkh72crbcba7flwxyi3n293vav6d7qkzkh2v4zfyi4iia8vj8`
-    //    Text hashing, used for uploaded .drv files and outputs produced by
-    //    builtins.toFile.
-    //
-    // Semantically, they can be split into the following components:
-    //  - "content address prefix". Currently, "fixed" and "text" are supported.
-    //  - "hash mode". Currently, "flat" and "recursive" are supported.
-    //  - "hash type". The underlying hash function used.
-    //    Currently, sha1, md5, sha256, sha512.
-    //  - "digest". The digest itself.
-    //
-    // There are some restrictions on the possible combinations.
-    // For example, `text` and `fixed:recursive` always imply sha256.
-    //
-    // We use an enum to encode the possible combinations, and optimize
-    // for the common case, `fixed:recursive`, identified as `NAR_SHA256`.
-    CA ca = 6;
-
-    message CA {
-        enum Hash {
-            // produced when uploading fixed-output store paths using NAR-based
-            // hashing (`outputHashMode = "recursive"`).
-            NAR_SHA256 = 0;
-            NAR_SHA1 = 1;
-            NAR_SHA512 = 2;
-            NAR_MD5 = 3;
-
-            // Produced when uploading .drv files or outputs produced by
-            // builtins.toFile.
-            // Produces equivalent digests as FLAT_SHA256, but is a separate
-            // hashing type in Nix, affecting output path calculation.
-            TEXT_SHA256 = 4;
-
-            // Produced when using fixed-output derivations with
-            // `outputHashMode = "flat"`.
-            FLAT_SHA1 = 5;
-            FLAT_MD5 = 6;
-            FLAT_SHA256 = 7;
-            FLAT_SHA512 = 8;
-
-            // TODO: what happens in Rust if we introduce a new enum kind here?
-        }
-
-        // The hashing type used.
-        Hash type = 1;
-
-        // The digest, in raw bytes.
-        bytes digest = 2;
+  // This represents a (parsed) signature line in a .narinfo file.
+  message Signature {
+    string name = 1;
+    bytes data = 2;
+  }
+
+  // This size of the NAR file, in bytes.
+  uint64 nar_size = 1;
+
+  // The sha256 of the NAR file representation.
+  bytes nar_sha256 = 2;
+
+  // The signatures in a .narinfo file.
+  repeated Signature signatures = 3;
+
+  // A list of references. To validate .narinfo signatures, a fingerprint needs
+  // to be constructed.
+  // This fingerprint doesn't just contain the hashes of the output paths of all
+  // references (like PathInfo.references), but their whole (base)names, so we
+  // need to keep them somewhere.
+  repeated string reference_names = 4;
+
+  // The StorePath of the .drv file producing this output.
+  // The .drv suffix is omitted in its `name` field.
+  StorePath deriver = 5;
+
+  // The CA field in the .narinfo.
+  // Its textual representations seen in the wild are one of the following:
+  //  - `fixed:r:sha256:1gcky5hlf5vqfzpyhihydmm54grhc94mcs8w7xr8613qsqb1v2j6`
+  //    fixed-output derivations using "recursive" `outputHashMode`.
+  //  - `fixed:sha256:19xqkh72crbcba7flwxyi3n293vav6d7qkzkh2v4zfyi4iia8vj8
+  //    fixed-output derivations using "flat" `outputHashMode`
+  //  - `text:sha256:19xqkh72crbcba7flwxyi3n293vav6d7qkzkh2v4zfyi4iia8vj8`
+  //    Text hashing, used for uploaded .drv files and outputs produced by
+  //    builtins.toFile.
+  //
+  // Semantically, they can be split into the following components:
+  //  - "content address prefix". Currently, "fixed" and "text" are supported.
+  //  - "hash mode". Currently, "flat" and "recursive" are supported.
+  //  - "hash type". The underlying hash function used.
+  //    Currently, sha1, md5, sha256, sha512.
+  //  - "digest". The digest itself.
+  //
+  // There are some restrictions on the possible combinations.
+  // For example, `text` and `fixed:recursive` always imply sha256.
+  //
+  // We use an enum to encode the possible combinations, and optimize for the
+  // common case, `fixed:recursive`, identified as `NAR_SHA256`.
+  CA ca = 6;
+
+  message CA {
+    enum Hash {
+      // produced when uploading fixed-output store paths using NAR-based
+      // hashing (`outputHashMode = "recursive"`).
+      NAR_SHA256 = 0;
+      NAR_SHA1 = 1;
+      NAR_SHA512 = 2;
+      NAR_MD5 = 3;
+
+      // Produced when uploading .drv files or outputs produced by
+      // builtins.toFile.
+      // Produces equivalent digests as FLAT_SHA256, but is a separate
+      // hashing type in Nix, affecting output path calculation.
+      TEXT_SHA256 = 4;
+
+      // Produced when using fixed-output derivations with
+      // `outputHashMode = "flat"`.
+      FLAT_SHA1 = 5;
+      FLAT_MD5 = 6;
+      FLAT_SHA256 = 7;
+      FLAT_SHA512 = 8;
+
+      // TODO: what happens in Rust if we introduce a new enum kind here?
     }
+
+    // The hashing type used.
+    Hash type = 1;
+
+    // The digest, in raw bytes.
+    bytes digest = 2;
+  }
 }
diff --git a/tvix/store/protos/rpc_pathinfo.proto b/tvix/store/protos/rpc_pathinfo.proto
index 6802d7034fe1..c1c91658ada2 100644
--- a/tvix/store/protos/rpc_pathinfo.proto
+++ b/tvix/store/protos/rpc_pathinfo.proto
@@ -4,74 +4,73 @@ syntax = "proto3";
 
 package tvix.store.v1;
 
-import "tvix/store/protos/pathinfo.proto";
 import "tvix/castore/protos/castore.proto";
+import "tvix/store/protos/pathinfo.proto";
 
 option go_package = "code.tvl.fyi/tvix/store-go;storev1";
 
 service PathInfoService {
-    // Return a PathInfo message matching the criteria specified in the
-    // GetPathInfoRequest message.
-    rpc Get(GetPathInfoRequest) returns (PathInfo);
-
-    // Upload a PathInfo object to the remote end. It MUST not return until the
-    // PathInfo object has been written on the the remote end.
-    //
-    // The remote end MAY check if a potential DirectoryNode has already been
-    // uploaded.
-    //
-    // Uploading clients SHOULD obviously not steer other machines to try to
-    // substitute before from the remote end before having finished uploading
-    // PathInfo, Directories and Blobs.
-    // The returned PathInfo object MAY contain additional narinfo signatures,
-    // but is otherwise left untouched.
-    rpc Put(PathInfo) returns (PathInfo);
+  // Return a PathInfo message matching the criteria specified in the
+  // GetPathInfoRequest message.
+  rpc Get(GetPathInfoRequest) returns (PathInfo);
 
+  // Upload a PathInfo object to the remote end. It MUST not return until the
+  // PathInfo object has been written on the the remote end.
+  //
+  // The remote end MAY check if a potential DirectoryNode has already been
+  // uploaded.
+  //
+  // Uploading clients SHOULD obviously not steer other machines to try to
+  // substitute before from the remote end before having finished uploading
+  // PathInfo, Directories and Blobs.
+  // The returned PathInfo object MAY contain additional narinfo signatures, but
+  // is otherwise left untouched.
+  rpc Put(PathInfo) returns (PathInfo);
 
-    // Calculate the NAR representation of the contents specified by the
-    // root_node. The calculation SHOULD be cached server-side for subsequent
-    // requests.
-    //
-    // All references (to blobs or Directory messages) MUST already exist in
-    // the store.
-    //
-    // The method can be used to produce a Nix fixed-output path, which
-    // contains the (compressed) sha256 of the NAR content representation in
-    // the root_node name (suffixed with the name).
-    //
-    // It can also be used to calculate arbitrary NAR hashes of output paths,
-    // in case a legacy Nix Binary Cache frontend is provided.
-    rpc CalculateNAR(tvix.castore.v1.Node) returns (CalculateNARResponse);
+  // Calculate the NAR representation of the contents specified by the
+  // root_node. The calculation SHOULD be cached server-side for subsequent
+  // requests.
+  //
+  // All references (to blobs or Directory messages) MUST already exist in the
+  // store.
+  //
+  // The method can be used to produce a Nix fixed-output path, which contains
+  // the (compressed) sha256 of the NAR content representation in the root_node
+  // name (suffixed with the name).
+  //
+  // It can also be used to calculate arbitrary NAR hashes of output paths, in
+  // case a legacy Nix Binary Cache frontend is provided.
+  rpc CalculateNAR(tvix.castore.v1.Node) returns (CalculateNARResponse);
 
-    // Return a stream of PathInfo messages matching the criteria specified in
-    // ListPathInfoRequest.
-    rpc List(ListPathInfoRequest) returns (stream PathInfo);
+  // Return a stream of PathInfo messages matching the criteria specified in
+  // ListPathInfoRequest.
+  rpc List(ListPathInfoRequest) returns (stream PathInfo);
 }
 
 // The parameters that can be used to lookup a (single) PathInfo object.
 // Currently, only a lookup by output hash is supported.
 message GetPathInfoRequest {
-    oneof by_what {
-      // The output hash of a nix path (20 bytes).
-      // This is the nixbase32-decoded portion of a Nix output path, so to substitute
-      // /nix/store/xm35nga2g20mz5sm5l6n8v3bdm86yj83-cowsay-3.04
-      // this field would contain nixbase32dec("xm35nga2g20mz5sm5l6n8v3bdm86yj83").
-      bytes by_output_hash = 1;
-    };
+  oneof by_what {
+    // The output hash of a nix path (20 bytes).
+    // This is the nixbase32-decoded portion of a Nix output path, so to substitute
+    // /nix/store/xm35nga2g20mz5sm5l6n8v3bdm86yj83-cowsay-3.04
+    // this field would contain nixbase32dec("xm35nga2g20mz5sm5l6n8v3bdm86yj83").
+    bytes by_output_hash = 1;
+  }
 }
 
 // The parameters that can be used to lookup (multiple) PathInfo objects.
 // Currently no filtering is possible, all objects are returned.
-message ListPathInfoRequest { }
+message ListPathInfoRequest {}
 
 // CalculateNARResponse is the response returned by the CalculateNAR request.
 //
 // It contains the size of the NAR representation (in bytes), and the sha56
 // digest.
 message CalculateNARResponse {
-    // This size of the NAR file, in bytes.
-    uint64 nar_size = 1;
+  // This size of the NAR file, in bytes.
+  uint64 nar_size = 1;
 
-    // The sha256 of the NAR file representation.
-    bytes nar_sha256 = 2;
+  // The sha256 of the NAR file representation.
+  bytes nar_sha256 = 2;
 }