refactor(server): Use wrapper script to avoid path dependency

Instead of requiring the server component to be made aware of the
location of the Nix builder via environment variables, this commit
introduces a wrapper script for the builder that can simply exist on
the builders $PATH.

This is one step towards a slightly nicer out-of-the-box experience
when using `nix-build -A nixery-bin`.

1 files changed, 292 insertions, 0 deletions

diff --git a/tools/nixery/build-image/build-image.nix b/tools/nixery/build-image/build-image.nix
new file mode 100644
index 000000000000..37156905fa38
--- /dev/null
+++ b/tools/nixery/build-image/build-image.nix
@@ -0,0 +1,292 @@
+# Copyright 2019 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This file contains a modified version of dockerTools.buildImage that, instead
+# of outputting a single tarball which can be imported into a running Docker
+# daemon, builds a manifest file that can be used for serving the image over a
+# registry API.
+
+{
+  # Image Name
+  name,
+  # Image tag, the Nix's output hash will be used if null
+  tag ? null,
+  # Files to put on the image (a nix store path or list of paths).
+  contents ? [],
+  # Packages to install by name (which must refer to top-level attributes of
+  # nixpkgs). This is passed in as a JSON-array in string form.
+  packages ? "[]",
+  # Optional bash script to run on the files prior to fixturizing the layer.
+  extraCommands ? "", uid ? 0, gid ? 0,
+  # Docker's modern image storage mechanisms have a maximum of 125
+  # layers. To allow for some extensibility (via additional layers),
+  # the default here is set to something a little less than that.
+  maxLayers ? 96,
+
+  # Configuration for which package set to use when building.
+  #
+  # Both channels of the public nixpkgs repository as well as imports
+  # from private repositories are supported.
+  #
+  # This setting can be invoked with three different formats:
+  #
+  # 1. nixpkgs!$channel (e.g. nixpkgs!nixos-19.03)
+  # 2. git!$repo!$rev (e.g. git!git@github.com:NixOS/nixpkgs.git!master)
+  # 3. path!$path (e.g. path!/var/local/nixpkgs)
+  #
+  # '!' was chosen as the separator because `builtins.split` does not
+  # support regex escapes and there are few other candidates. It
+  # doesn't matter much because this is invoked by the server.
+  pkgSource ? "nixpkgs!nixos-19.03"
+}:
+
+let
+  # If a nixpkgs channel is requested, it is retrieved from Github (as
+  # a tarball) and imported.
+  fetchImportChannel = channel:
+  let url = "https://github.com/NixOS/nixpkgs-channels/archive/${channel}.tar.gz";
+  in import (builtins.fetchTarball url) {};
+
+  # If a git repository is requested, it is retrieved via
+  # builtins.fetchGit which defaults to the git configuration of the
+  # outside environment. This means that user-configured SSH
+  # credentials etc. are going to work as expected.
+  fetchImportGit = url: rev:
+  let
+    # builtins.fetchGit needs to know whether 'rev' is a reference
+    # (e.g. a branch/tag) or a revision (i.e. a commit hash)
+    #
+    # Since this data is being extrapolated from the supplied image
+    # tag, we have to guess if we want to avoid specifying a format.
+    #
+    # There are some additional caveats around whether the default
+    # branch contains the specified revision, which need to be
+    # explained to users.
+    spec = if (builtins.stringLength rev) == 40 then {
+      inherit url rev;
+    } else {
+      inherit url;
+      ref = rev;
+    };
+  in import (builtins.fetchGit spec) {};
+
+  importPath = path: import (builtins.toPath path) {};
+
+  source = builtins.split "!" pkgSource;
+  sourceType = builtins.elemAt source 0;
+  pkgs = with builtins;
+    if sourceType == "nixpkgs"
+    then fetchImportChannel (elemAt source 2)
+    else if sourceType == "git"
+    then fetchImportGit (elemAt source 2) (elemAt source 4)
+    else if sourceType == "path"
+    then importPath (elemAt source 2)
+    else builtins.throw("Invalid package set source specification: ${pkgSource}");
+in
+
+# Since this is essentially a re-wrapping of some of the functionality that is
+# implemented in the dockerTools, we need all of its components in our top-level
+# namespace.
+with builtins;
+with pkgs;
+with dockerTools;
+
+let
+  tarLayer = "application/vnd.docker.image.rootfs.diff.tar";
+  baseName = baseNameOf name;
+
+  # deepFetch traverses the top-level Nix package set to retrieve an item via a
+  # path specified in string form.
+  #
+  # For top-level items, the name of the key yields the result directly. Nested
+  # items are fetched by using dot-syntax, as in Nix itself.
+  #
+  # Due to a restriction of the registry API specification it is not possible to
+  # pass uppercase characters in an image name, however the Nix package set
+  # makes use of camelCasing repeatedly (for example for `haskellPackages`).
+  #
+  # To work around this, if no value is found on the top-level a second lookup
+  # is done on the package set using lowercase-names. This is not done for
+  # nested sets, as they often have keys that only differ in case.
+  #
+  # For example, `deepFetch pkgs "xorg.xev"` retrieves `pkgs.xorg.xev` and
+  # `deepFetch haskellpackages.stylish-haskell` retrieves
+  # `haskellPackages.stylish-haskell`.
+  deepFetch = with lib; s: n:
+    let path = splitString "." n;
+        err = { error = "not_found"; pkg = n; };
+        # The most efficient way I've found to do a lookup against
+        # case-differing versions of an attribute is to first construct a
+        # mapping of all lowercased attribute names to their differently cased
+        # equivalents.
+        #
+        # This map is then used for a second lookup if the top-level
+        # (case-sensitive) one does not yield a result.
+        hasUpper = str: (match ".*[A-Z].*" str) != null;
+        allUpperKeys = filter hasUpper (attrNames s);
+        lowercased = listToAttrs (map (k: {
+          name = toLower k;
+          value = k;
+          }) allUpperKeys);
+        caseAmendedPath = map (v: if hasAttr v lowercased then lowercased."${v}" else v) path;
+        fetchLower = attrByPath caseAmendedPath err s;
+    in attrByPath path fetchLower s;
+
+  # allContents is the combination of all derivations and store paths passed in
+  # directly, as well as packages referred to by name.
+  #
+  # It accumulates potential errors about packages that could not be found to
+  # return this information back to the server.
+  allContents =
+    # Folds over the results of 'deepFetch' on all requested packages to
+    # separate them into errors and content. This allows the program to
+    # terminate early and return only the errors if any are encountered.
+    let splitter = attrs: res:
+          if hasAttr "error" res
+          then attrs // { errors = attrs.errors ++ [ res ]; }
+          else attrs // { contents = attrs.contents ++ [ res ]; };
+        init = { inherit contents; errors = []; };
+        fetched = (map (deepFetch pkgs) (fromJSON packages));
+    in foldl' splitter init fetched;
+
+  contentsEnv = symlinkJoin {
+    name = "bulk-layers";
+    paths = allContents.contents;
+  };
+
+  # The image build infrastructure expects to be outputting a slightly different
+  # format than the one we serve over the registry protocol. To work around its
+  # expectations we need to provide an empty JSON file that it can write some
+  # fun data into.
+  emptyJson = writeText "empty.json" "{}";
+
+  bulkLayers = mkManyPureLayers {
+    name = baseName;
+    configJson = emptyJson;
+    closure = writeText "closure" "${contentsEnv} ${emptyJson}";
+    # One layer will be taken up by the customisationLayer, so
+    # take up one less.
+    maxLayers = maxLayers - 1;
+  };
+
+  customisationLayer = mkCustomisationLayer {
+    name = baseName;
+    contents = contentsEnv;
+    baseJson = emptyJson;
+    inherit uid gid extraCommands;
+  };
+
+  # Inspect the returned bulk layers to determine which layers belong to the
+  # image and how to serve them.
+  #
+  # This computes both an MD5 and a SHA256 hash of each layer, which are used
+  # for different purposes. See the registry server implementation for details.
+  #
+  # Some of this logic is copied straight from `buildLayeredImage`.
+  allLayersJson = runCommand "fs-layer-list.json" {
+    buildInputs = [ coreutils findutils jq openssl ];
+  } ''
+      find ${bulkLayers} -mindepth 1 -maxdepth 1 | sort -t/ -k5 -n > layer-list
+      echo ${customisationLayer} >> layer-list
+
+      for layer in $(cat layer-list); do
+        layerPath="$layer/layer.tar"
+        layerSha256=$(sha256sum $layerPath | cut -d ' ' -f1)
+        # The server application compares binary MD5 hashes and expects base64
+        # encoding instead of hex.
+        layerMd5=$(openssl dgst -md5 -binary $layerPath | openssl enc -base64)
+        layerSize=$(wc -c $layerPath | cut -d ' ' -f1)
+
+        jq -n -c --arg sha256 $layerSha256 --arg md5 $layerMd5 --arg size $layerSize --arg path $layerPath \
+          '{ size: ($size | tonumber), sha256: $sha256, md5: $md5, path: $path }' >> fs-layers
+      done
+
+      cat fs-layers | jq -s -c '.' > $out
+  '';
+  allLayers = fromJSON (readFile allLayersJson);
+
+  # Image configuration corresponding to the OCI specification for the file type
+  # 'application/vnd.oci.image.config.v1+json'
+  config = {
+    architecture = "amd64";
+    os = "linux";
+    rootfs.type = "layers";
+    rootfs.diff_ids = map (layer: "sha256:${layer.sha256}") allLayers;
+    # Required to let Kubernetes import Nixery images
+    config = {};
+  };
+  configJson = writeText "${baseName}-config.json" (toJSON config);
+  configMetadata = fromJSON (readFile (runCommand "config-meta" {
+    buildInputs = [ jq openssl ];
+  } ''
+    size=$(wc -c ${configJson} | cut -d ' ' -f1)
+    sha256=$(sha256sum ${configJson} | cut -d ' ' -f1)
+    md5=$(openssl dgst -md5 -binary ${configJson} | openssl enc -base64)
+    jq -n -c --arg size $size --arg sha256 $sha256 --arg md5 $md5 \
+      '{ size: ($size | tonumber), sha256: $sha256, md5: $md5 }' \
+      >> $out
+  ''));
+
+  # Corresponds to the manifest JSON expected by the Registry API.
+  #
+  # This is Docker's "Image Manifest V2, Schema 2":
+  #   https://docs.docker.com/registry/spec/manifest-v2-2/
+  manifest = {
+    schemaVersion = 2;
+    mediaType = "application/vnd.docker.distribution.manifest.v2+json";
+
+    config = {
+      mediaType = "application/vnd.docker.container.image.v1+json";
+      size = configMetadata.size;
+      digest = "sha256:${configMetadata.sha256}";
+    };
+
+    layers = map (layer: {
+      mediaType = tarLayer;
+      digest = "sha256:${layer.sha256}";
+      size = layer.size;
+    }) allLayers;
+  };
+
+  # This structure maps each layer digest to the actual tarball that will need
+  # to be served. It is used by the controller to cache the paths during a pull.
+  layerLocations = {
+      "${configMetadata.sha256}" = {
+        path = configJson;
+        md5 = configMetadata.md5;
+      };
+    } // (listToAttrs (map (layer: {
+      name  = "${layer.sha256}";
+      value = {
+        path = layer.path;
+        md5 = layer.md5;
+      };
+    }) allLayers));
+
+  # Final output structure returned to the controller in the case of a
+  # successful build.
+  manifestOutput = {
+    inherit manifest layerLocations;
+  };
+
+  # Output structure returned if errors occured during the build. Currently the
+  # only error type that is returned in a structured way is 'not_found'.
+  errorOutput = {
+    error = "not_found";
+    pkgs = map (err: err.pkg) allContents.errors;
+  };
+in writeText "manifest-output.json" (if (length allContents.errors) == 0
+  then toJSON manifestOutput
+  else toJSON errorOutput
+)