chore(3p/nix): unvendor tvix 0.1 r/4098

Nothing is using this now, and we'll likely never pick this up again,
but we learned a lot in the process.

Every now and then this breaks in some bizarre way on channel bumps
and it's just a waste of time to maintain that.

Change-Id: Idcf2f5acd4ca7070ce18d7149cbfc0d967dc0a44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5632
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Autosubmit: tazjin <tazjin@tvl.su>

14 files changed, 0 insertions, 1771 deletions

diff --git a/third_party/nix/scripts/build.sh b/third_party/nix/scripts/build.sh
deleted file mode 100755
index 759c9e9f2c12..000000000000
--- a/third_party/nix/scripts/build.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/usr/bin/env bash
-
-# Run `nix build` using a local store, for use during development. Intended to
-# be run from the cmake build directory
-
-set -eo pipefail
-
-if [ $1 = "--debug" ]; then
-    run=(gdb --args)
-    shift 1
-elif [ "$1" = "--rr" ]; then
-    run=(rr record)
-    shift 1
-else
-    run=()
-fi
-
-make -j 10
-NIX_STORE_DIR=$(pwd)/nix/store \
-    NIX_LOG_DIR=$(pwd)/nix/var/log/nix \
-    NIX_STATE_DIR=$(pwd)/nix/var/nix \
-    XDG_CACHE_HOME=$(pwd)/cache \
-    NIX_REMOTE=daemon \
-    ${run[*]} ./src/nix build "$@"
diff --git a/third_party/nix/scripts/daemon.sh b/third_party/nix/scripts/daemon.sh
deleted file mode 100755
index 3daa0f139097..000000000000
--- a/third_party/nix/scripts/daemon.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/usr/bin/env bash
-set -eo pipefail
-
-# Run a nix daemon using a local store, for use during development. Intended to
-# be run from the cmake build directory
-
-if [ $1 = "--debug" ]; then
-    run=(gdb --args)
-    shift 1
-elif [ "$1" = "--rr" ]; then
-    run=(rr record)
-    shift 1
-else
-    run=()
-fi
-
-make -j 10
-NIX_STORE_DIR=$(pwd)/nix/store \
-    NIX_LOG_DIR=$(pwd)/nix/var/log/nix \
-    NIX_STATE_DIR=$(pwd)/nix/var/nix \
-    XDG_CACHE_HOME=$(pwd)/cache \
-    NIX_LIBEXEC_DIR=$(pwd) \
-    GRPC_TRACE=all \
-    ${gdb[*]} ./src/nix-daemon/nix-daemon
diff --git a/third_party/nix/scripts/eval.sh b/third_party/nix/scripts/eval.sh
deleted file mode 100755
index f71d9f7931fe..000000000000
--- a/third_party/nix/scripts/eval.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/usr/bin/env bash
-set -eo pipefail
-
-# Run `nix eval` using a local store, for use during development. Intended to
-# be run from the cmake build directory
-
-if [ "$#" -gt 0 ] && [ "$1" = "--debug" ]; then
-    gdb=(gdb --args)
-    shift 1
-elif [ "$1" = "--rr" ]; then
-    gdb=(rr record)
-    shift 1
-else
-    gdb=()
-fi
-
-make -j 10
-NIX_STORE_DIR=$(pwd)/nix/store \
-    NIX_LOG_DIR=$(pwd)/nix/var/log/nix \
-    NIX_STATE_DIR=$(pwd)/nix/var/nix \
-    XDG_CACHE_HOME=$(pwd)/cache \
-    NIX_REMOTE=daemon \
-    ${gdb[*]} ./src/nix eval "$@"
diff --git a/third_party/nix/scripts/install-darwin-multi-user.sh b/third_party/nix/scripts/install-darwin-multi-user.sh
deleted file mode 100644
index 49076bd5c03f..000000000000
--- a/third_party/nix/scripts/install-darwin-multi-user.sh
+++ /dev/null
@@ -1,144 +0,0 @@
-#!/usr/bin/env bash
-
-set -eu
-set -o pipefail
-
-readonly PLIST_DEST=/Library/LaunchDaemons/org.nixos.nix-daemon.plist
-
-dsclattr() {
-    /usr/bin/dscl . -read "$1" \
-        | awk "/$2/ { print \$2 }"
-}
-
-poly_validate_assumptions() {
-    if [ "$(uname -s)" != "Darwin" ]; then
-        failure "This script is for use with macOS!"
-    fi
-}
-
-poly_service_installed_check() {
-    [ -e "$PLIST_DEST" ]
-}
-
-poly_service_uninstall_directions() {
-        cat <<EOF
-$1. Delete $PLIST_DEST
-
-  sudo launchctl unload $PLIST_DEST
-  sudo rm $PLIST_DEST
-
-EOF
-}
-
-poly_service_setup_note() {
-    cat <<EOF
- - load and start a LaunchDaemon (at $PLIST_DEST) for nix-daemon
-
-EOF
-}
-
-poly_configure_nix_daemon_service() {
-    _sudo "to set up the nix-daemon as a LaunchDaemon" \
-          cp -f "/nix/var/nix/profiles/default$PLIST_DEST" "$PLIST_DEST"
-
-    _sudo "to load the LaunchDaemon plist for nix-daemon" \
-          launchctl load /Library/LaunchDaemons/org.nixos.nix-daemon.plist
-
-    _sudo "to start the nix-daemon" \
-          launchctl start org.nixos.nix-daemon
-
-}
-
-poly_group_exists() {
-    /usr/bin/dscl . -read "/Groups/$1" > /dev/null 2>&1
-}
-
-poly_group_id_get() {
-    dsclattr "/Groups/$1" "PrimaryGroupID"
-}
-
-poly_create_build_group() {
-    _sudo "Create the Nix build group, $NIX_BUILD_GROUP_NAME" \
-          /usr/sbin/dseditgroup -o create \
-          -r "Nix build group for nix-daemon" \
-          -i "$NIX_BUILD_GROUP_ID" \
-          "$NIX_BUILD_GROUP_NAME" >&2
-}
-
-poly_user_exists() {
-    /usr/bin/dscl . -read "/Users/$1" > /dev/null 2>&1
-}
-
-poly_user_id_get() {
-    dsclattr "/Users/$1" "UniqueID"
-}
-
-poly_user_hidden_get() {
-    dsclattr "/Users/$1" "IsHidden"
-}
-
-poly_user_hidden_set() {
-    _sudo "in order to make $1 a hidden user" \
-          /usr/bin/dscl . -create "/Users/$1" "IsHidden" "1"
-}
-
-poly_user_home_get() {
-    dsclattr "/Users/$1" "NFSHomeDirectory"
-}
-
-poly_user_home_set() {
-    _sudo "in order to give $1 a safe home directory" \
-          /usr/bin/dscl . -create "/Users/$1" "NFSHomeDirectory" "$2"
-}
-
-poly_user_note_get() {
-    dsclattr "/Users/$1" "RealName"
-}
-
-poly_user_note_set() {
-    _sudo "in order to give $username a useful note" \
-          /usr/bin/dscl . -create "/Users/$1" "RealName" "$2"
-}
-
-poly_user_shell_get() {
-    dsclattr "/Users/$1" "UserShell"
-}
-
-poly_user_shell_set() {
-    _sudo "in order to give $1 a safe home directory" \
-          /usr/bin/dscl . -create "/Users/$1" "UserShell" "$2"
-}
-
-poly_user_in_group_check() {
-    username=$1
-    group=$2
-    dseditgroup -o checkmember -m "$username" "$group" > /dev/null 2>&1
-}
-
-poly_user_in_group_set() {
-    username=$1
-    group=$2
-
-    _sudo "Add $username to the $group group"\
-          /usr/sbin/dseditgroup -o edit -t user \
-          -a "$username" "$group"
-}
-
-poly_user_primary_group_get() {
-    dsclattr "/Users/$1" "PrimaryGroupID"
-}
-
-poly_user_primary_group_set() {
-    _sudo "to let the nix daemon use this user for builds (this might seem redundant, but there are two concepts of group membership)" \
-          /usr/bin/dscl . -create "/Users/$1" "PrimaryGroupID" "$2"
-}
-
-poly_create_build_user() {
-    username=$1
-    uid=$2
-    builder_num=$3
-
-    _sudo "Creating the Nix build user (#$builder_num), $username" \
-          /usr/bin/dscl . create "/Users/$username" \
-          UniqueID "${uid}"
-}
diff --git a/third_party/nix/scripts/install-multi-user.sh b/third_party/nix/scripts/install-multi-user.sh
deleted file mode 100644
index 5233762fa649..000000000000
--- a/third_party/nix/scripts/install-multi-user.sh
+++ /dev/null
@@ -1,798 +0,0 @@
-#!/usr/bin/env bash
-
-set -eu
-set -o pipefail
-
-# Sourced from:
-# - https://github.com/LnL7/nix-darwin/blob/8c29d0985d74b4a990238497c47a2542a5616b3c/bootstrap.sh
-# - https://gist.github.com/expipiplus1/e571ce88c608a1e83547c918591b149f/ac504c6c1b96e65505fbda437a28ce563408ecb0
-# - https://github.com/NixOS/nixos-org-configurations/blob/a122f418797713d519aadf02e677fce0dc1cb446/delft/scripts/nix-mac-installer.sh
-# - https://github.com/matthewbauer/macNixOS/blob/f6045394f9153edea417be90c216788e754feaba/install-macNixOS.sh
-# - https://gist.github.com/LnL7/9717bd6cdcb30b086fd7f2093e5f8494/86b26f852ce563e973acd30f796a9a416248c34a
-#
-# however tracking which bits came from which would be impossible.
-
-readonly ESC='\033[0m'
-readonly BOLD='\033[1m'
-readonly BLUE='\033[34m'
-readonly BLUE_UL='\033[4;34m'
-readonly GREEN='\033[32m'
-readonly GREEN_UL='\033[4;32m'
-readonly RED='\033[31m'
-
-readonly NIX_USER_COUNT="32"
-readonly NIX_BUILD_GROUP_ID="30000"
-readonly NIX_BUILD_GROUP_NAME="nixbld"
-readonly NIX_FIRST_BUILD_UID="30001"
-# Please don't change this. We don't support it, because the
-# default shell profile that comes with Nix doesn't support it.
-readonly NIX_ROOT="/nix"
-
-readonly PROFILE_TARGETS=("/etc/bashrc" "/etc/profile.d/nix.sh" "/etc/zshrc")
-readonly PROFILE_BACKUP_SUFFIX=".backup-before-nix"
-readonly PROFILE_NIX_FILE="$NIX_ROOT/var/nix/profiles/default/etc/profile.d/nix-daemon.sh"
-
-readonly NIX_INSTALLED_NIX="@nix@"
-readonly NIX_INSTALLED_CACERT="@cacert@"
-readonly EXTRACTED_NIX_PATH="$(dirname "$0")"
-
-readonly ROOT_HOME=$(echo ~root)
-
-if [ -t 0 ]; then
-    readonly IS_HEADLESS='no'
-else
-    readonly IS_HEADLESS='yes'
-fi
-
-headless() {
-    if [ "$IS_HEADLESS" = "yes" ]; then
-        return 0
-    else
-        return 1
-    fi
-}
-
-contactme() {
-    echo "We'd love to help if you need it."
-    echo ""
-    echo "If you can, open an issue at https://github.com/nixos/nix/issues"
-    echo ""
-    echo "Or feel free to contact the team,"
-    echo " - on IRC #nixos on irc.freenode.net"
-    echo " - on twitter @nixos_org"
-}
-
-uninstall_directions() {
-    subheader "Uninstalling nix:"
-    local step=0
-
-    if poly_service_installed_check; then
-        step=$((step + 1))
-        poly_service_uninstall_directions "$step"
-    fi
-
-    for profile_target in "${PROFILE_TARGETS[@]}"; do
-        if [ -e "$profile_target" ] && [ -e "$profile_target$PROFILE_BACKUP_SUFFIX" ]; then
-            step=$((step + 1))
-            cat <<EOF
-$step. Restore $profile_target$PROFILE_BACKUP_SUFFIX back to $profile_target
-
-  sudo mv $profile_target$PROFILE_BACKUP_SUFFIX $profile_target
-
-(after this one, you may need to re-open any terminals that were
-opened while it existed.)
-
-EOF
-        fi
-    done
-
-    step=$((step + 1))
-    cat <<EOF
-$step. Delete the files Nix added to your system:
-
-  sudo rm -rf /etc/nix $NIX_ROOT $ROOT_HOME/.nix-profile $ROOT_HOME/.nix-defexpr $ROOT_HOME/.nix-channels $HOME/.nix-profile $HOME/.nix-defexpr $HOME/.nix-channels
-
-and that is it.
-
-EOF
-
-}
-
-nix_user_for_core() {
-    printf "nixbld%d" "$1"
-}
-
-nix_uid_for_core() {
-    echo $((NIX_FIRST_BUILD_UID + $1 - 1))
-}
-
-_textout() {
-    echo -en "$1"
-    shift
-    if [ "$*" = "" ]; then
-        cat
-    else
-        echo "$@"
-    fi
-    echo -en "$ESC"
-}
-
-header() {
-    follow="---------------------------------------------------------"
-    header=$(echo "---- $* $follow$follow$follow" | head -c 80)
-    echo ""
-    _textout "$BLUE" "$header"
-}
-
-warningheader() {
-    follow="---------------------------------------------------------"
-    header=$(echo "---- $* $follow$follow$follow" | head -c 80)
-    echo ""
-    _textout "$RED" "$header"
-}
-
-subheader() {
-    echo ""
-    _textout "$BLUE_UL" "$*"
-}
-
-row() {
-    printf "$BOLD%s$ESC:\\t%s\\n" "$1" "$2"
-}
-
-task() {
-    echo ""
-    ok "~~> $1"
-}
-
-bold() {
-    echo "$BOLD$*$ESC"
-}
-
-ok() {
-    _textout "$GREEN" "$@"
-}
-
-warning() {
-    warningheader "warning!"
-    cat
-    echo ""
-}
-
-failure() {
-    header "oh no!"
-    _textout "$RED" "$@"
-    echo ""
-    _textout "$RED" "$(contactme)"
-    trap finish_cleanup EXIT
-    exit 1
-}
-
-ui_confirm() {
-    _textout "$GREEN$GREEN_UL" "$1"
-
-    if headless; then
-        echo "No TTY, assuming you would say yes :)"
-        return 0
-    fi
-
-    local prompt="[y/n] "
-    echo -n "$prompt"
-    while read -r y; do
-        if [ "$y" = "y" ]; then
-            echo ""
-            return 0
-        elif [ "$y" = "n" ]; then
-            echo ""
-            return 1
-        else
-            _textout "$RED" "Sorry, I didn't understand. I can only understand answers of y or n"
-            echo -n "$prompt"
-        fi
-    done
-    echo ""
-    return 1
-}
-
-__sudo() {
-    local expl="$1"
-    local cmd="$2"
-    shift
-    header "sudo execution"
-
-    echo "I am executing:"
-    echo ""
-    printf "    $ sudo %s\\n" "$cmd"
-    echo ""
-    echo "$expl"
-    echo ""
-
-    return 0
-}
-
-_sudo() {
-    local expl="$1"
-    shift
-    if ! headless; then
-        __sudo "$expl" "$*"
-    fi
-    sudo "$@"
-}
-
-
-readonly SCRATCH=$(mktemp -d -t tmp.XXXXXXXXXX)
-function finish_cleanup {
-    rm -rf "$SCRATCH"
-}
-
-function finish_fail {
-    finish_cleanup
-
-    failure <<EOF
-Jeeze, something went wrong. If you can take all the output and open
-an issue, we'd love to fix the problem so nobody else has this issue.
-
-:(
-EOF
-}
-trap finish_fail EXIT
-
-channel_update_failed=0
-function finish_success {
-    finish_cleanup
-
-    ok "Alright! We're done!"
-    if [ "x$channel_update_failed" = x1 ]; then
-        echo ""
-        echo "But fetching the nixpkgs channel failed. (Are you offline?)"
-        echo "To try again later, run \"sudo -i nix-channel --update nixpkgs\"."
-    fi
-    cat <<EOF
-
-Before Nix will work in your existing shells, you'll need to close
-them and open them again. Other than that, you should be ready to go.
-
-Try it! Open a new terminal, and type:
-
-  $ nix-shell -p nix-info --run "nix-info -m"
-
-Thank you for using this installer. If you have any feedback, don't
-hesitate:
-
-$(contactme)
-EOF
-}
-
-
-validate_starting_assumptions() {
-    poly_validate_assumptions
-
-    if [ $EUID -eq 0 ]; then
-        failure <<EOF
-Please do not run this script with root privileges. We will call sudo
-when we need to.
-EOF
-    fi
-
-    if type nix-env 2> /dev/null >&2; then
-        failure <<EOF
-Nix already appears to be installed, and this tool assumes it is
-_not_ yet installed.
-
-$(uninstall_directions)
-EOF
-    fi
-
-    if [ "${NIX_REMOTE:-}" != "" ]; then
-        failure <<EOF
-For some reason, \$NIX_REMOTE is set. It really should not be set
-before this installer runs, and it hints that Nix is currently
-installed. Please delete the old Nix installation and start again.
-
-Note: You might need to close your shell window and open a new shell
-to clear the variable.
-EOF
-    fi
-
-    if echo "${SSL_CERT_FILE:-}" | grep -qE "(nix/var/nix|nix-profile)"; then
-        failure <<EOF
-It looks like \$SSL_CERT_FILE is set to a path that used to be part of
-the old Nix installation. Please unset that variable and try again:
-
-  $ unset SSL_CERT_FILE
-
-EOF
-    fi
-
-    for file in ~/.bash_profile ~/.bash_login ~/.profile ~/.zshenv ~/.zprofile ~/.zshrc ~/.zlogin; do
-        if [ -f "$file" ]; then
-            if grep -l "^[^#].*.nix-profile" "$file"; then
-                failure <<EOF
-I found a reference to a ".nix-profile" in $file.
-This has a high chance of breaking a new nix installation. It was most
-likely put there by a previous Nix installer.
-
-Please remove this reference and try running this again. You should
-also look for similar references in:
-
- - ~/.bash_profile
- - ~/.bash_login
- - ~/.profile
-
-or other shell init files that you may have.
-
-$(uninstall_directions)
-EOF
-            fi
-        fi
-    done
-
-    if [ -d /nix/store ] || [ -d /nix/var ]; then
-        failure <<EOF
-There are some relics of a previous installation of Nix at /nix, and
-this scripts assumes Nix is _not_ yet installed. Please delete the old
-Nix installation and start again.
-
-$(uninstall_directions)
-EOF
-    fi
-
-    if [ -d /etc/nix ]; then
-        failure <<EOF
-There are some relics of a previous installation of Nix at /etc/nix, and
-this scripts assumes Nix is _not_ yet installed. Please delete the old
-Nix installation and start again.
-
-$(uninstall_directions)
-EOF
-    fi
-
-    for profile_target in "${PROFILE_TARGETS[@]}"; do
-        if [ -e "$profile_target$PROFILE_BACKUP_SUFFIX" ]; then
-        failure <<EOF
-When this script runs, it backs up the current $profile_target to
-$profile_target$PROFILE_BACKUP_SUFFIX. This backup file already exists, though.
-
-Please follow these instructions to clean up the old backup file:
-
-1. Copy $profile_target and $profile_target$PROFILE_BACKUP_SUFFIX to another place, just
-in case.
-
-2. Take care to make sure that $profile_target$PROFILE_BACKUP_SUFFIX doesn't look like
-it has anything nix-related in it. If it does, something is probably
-quite wrong. Please open an issue or get in touch immediately.
-
-3. Take care to make sure that $profile_target doesn't look like it has
-anything nix-related in it. If it does, and $profile_target _did not_,
-run:
-
-  $ /usr/bin/sudo /bin/mv $profile_target$PROFILE_BACKUP_SUFFIX $profile_target
-
-and try again.
-EOF
-        fi
-
-        if [ -e "$profile_target" ] && grep -qi "nix" "$profile_target"; then
-            failure <<EOF
-It looks like $profile_target already has some Nix configuration in
-there. There should be no reason to run this again. If you're having
-trouble, please open an issue.
-EOF
-        fi
-    done
-
-    danger_paths=("$ROOT_HOME/.nix-defexpr" "$ROOT_HOME/.nix-channels" "$ROOT_HOME/.nix-profile")
-    for danger_path in "${danger_paths[@]}"; do
-        if _sudo "making sure that $danger_path doesn't exist" \
-           test -e "$danger_path"; then
-            failure <<EOF
-I found a file at $danger_path, which is a relic of a previous
-installation. You must first delete this file before continuing.
-
-$(uninstall_directions)
-EOF
-        fi
-    done
-}
-
-setup_report() {
-    header "Nix config report"
-    row "        Temp Dir" "$SCRATCH"
-    row "        Nix Root" "$NIX_ROOT"
-    row "     Build Users" "$NIX_USER_COUNT"
-    row "  Build Group ID" "$NIX_BUILD_GROUP_ID"
-    row "Build Group Name" "$NIX_BUILD_GROUP_NAME"
-    if [ "${ALLOW_PREEXISTING_INSTALLATION:-}" != "" ]; then
-        row "Preexisting Install" "Allowed"
-    fi
-
-    subheader "build users:"
-
-    row "    Username" "UID"
-    for i in $(seq 1 "$NIX_USER_COUNT"); do
-        row "     $(nix_user_for_core "$i")" "$(nix_uid_for_core "$i")"
-    done
-    echo ""
-}
-
-create_build_group() {
-    local primary_group_id
-
-    task "Setting up the build group $NIX_BUILD_GROUP_NAME"
-    if ! poly_group_exists "$NIX_BUILD_GROUP_NAME"; then
-        poly_create_build_group
-        row "            Created" "Yes"
-    else
-        primary_group_id=$(poly_group_id_get "$NIX_BUILD_GROUP_NAME")
-        if [ "$primary_group_id" -ne "$NIX_BUILD_GROUP_ID" ]; then
-            failure <<EOF
-It seems the build group $NIX_BUILD_GROUP_NAME already exists, but
-with the UID $primary_group_id. This script can't really handle
-that right now, so I'm going to give up.
-
-You can fix this by editing this script and changing the
-NIX_BUILD_GROUP_ID variable near the top to from $NIX_BUILD_GROUP_ID
-to $primary_group_id and re-run.
-EOF
-        else
-            row "            Exists" "Yes"
-        fi
-    fi
-}
-
-create_build_user_for_core() {
-    local coreid
-    local username
-    local uid
-
-    coreid="$1"
-    username=$(nix_user_for_core "$coreid")
-    uid=$(nix_uid_for_core "$coreid")
-
-    task "Setting up the build user $username"
-
-    if ! poly_user_exists "$username"; then
-        poly_create_build_user "$username" "$uid" "$coreid"
-        row "           Created" "Yes"
-    else
-        actual_uid=$(poly_user_id_get "$username")
-        if [ "$actual_uid" != "$uid" ]; then
-            failure <<EOF
-It seems the build user $username already exists, but with the UID
-with the UID '$actual_uid'. This script can't really handle that right
-now, so I'm going to give up.
-
-If you already created the users and you know they start from
-$actual_uid and go up from there, you can edit this script and change
-NIX_FIRST_BUILD_UID near the top of the file to $actual_uid and try
-again.
-EOF
-        else
-            row "            Exists" "Yes"
-        fi
-    fi
-
-    if [ "$(poly_user_hidden_get "$username")" = "1" ]; then
-        row "            Hidden" "Yes"
-    else
-        poly_user_hidden_set "$username"
-        row "            Hidden" "Yes"
-    fi
-
-    if [ "$(poly_user_home_get "$username")" = "/var/empty" ]; then
-        row "    Home Directory" "/var/empty"
-    else
-        poly_user_home_set "$username" "/var/empty"
-        row "    Home Directory" "/var/empty"
-    fi
-
-    # We use grep instead of an equality check because it is difficult
-    # to extract _just_ the user's note, instead it is prefixed with
-    # some plist junk. This was causing the user note to always be set,
-    # even if there was no reason for it.
-    if ! poly_user_note_get "$username" | grep -q "Nix build user $coreid"; then
-        row "              Note" "Nix build user $coreid"
-    else
-        poly_user_note_set "$username" "Nix build user $coreid"
-        row "              Note" "Nix build user $coreid"
-    fi
-
-    if [ "$(poly_user_shell_get "$username")" = "/sbin/nologin" ]; then
-        row "   Logins Disabled" "Yes"
-    else
-        poly_user_shell_set "$username" "/sbin/nologin"
-        row "   Logins Disabled" "Yes"
-    fi
-
-    if poly_user_in_group_check "$username" "$NIX_BUILD_GROUP_NAME"; then
-        row "  Member of $NIX_BUILD_GROUP_NAME" "Yes"
-    else
-        poly_user_in_group_set "$username" "$NIX_BUILD_GROUP_NAME"
-        row "  Member of $NIX_BUILD_GROUP_NAME" "Yes"
-    fi
-
-    if [ "$(poly_user_primary_group_get "$username")" = "$NIX_BUILD_GROUP_ID" ]; then
-        row "    PrimaryGroupID" "$NIX_BUILD_GROUP_ID"
-    else
-        poly_user_primary_group_set "$username" "$NIX_BUILD_GROUP_ID"
-        row "    PrimaryGroupID" "$NIX_BUILD_GROUP_ID"
-    fi
-}
-
-create_build_users() {
-    for i in $(seq 1 "$NIX_USER_COUNT"); do
-        create_build_user_for_core "$i"
-    done
-}
-
-create_directories() {
-    # FIXME: remove all of this because it duplicates LocalStore::LocalStore().
-
-    _sudo "to make the basic directory structure of Nix (part 1)" \
-          mkdir -pv -m 0755 /nix /nix/var /nix/var/log /nix/var/log/nix /nix/var/log/nix/drvs /nix/var/nix{,/db,/gcroots,/profiles,/temproots,/userpool} /nix/var/nix/{gcroots,profiles}/per-user
-
-    _sudo "to make the basic directory structure of Nix (part 2)" \
-          mkdir -pv -m 1775 /nix/store
-
-    _sudo "to make the basic directory structure of Nix (part 3)" \
-          chgrp "$NIX_BUILD_GROUP_NAME" /nix/store
-
-    _sudo "to place the default nix daemon configuration (part 1)" \
-          mkdir -pv -m 0555 /etc/nix
-}
-
-place_channel_configuration() {
-    echo "https://nixos.org/channels/nixpkgs-unstable nixpkgs" > "$SCRATCH/.nix-channels"
-    _sudo "to set up the default system channel (part 1)" \
-          install -m 0664 "$SCRATCH/.nix-channels" "$ROOT_HOME/.nix-channels"
-}
-
-welcome_to_nix() {
-    ok "Welcome to the Multi-User Nix Installation"
-
-    cat <<EOF
-
-This installation tool will set up your computer with the Nix package
-manager. This will happen in a few stages:
-
-1. Make sure your computer doesn't already have Nix. If it does, I
-   will show you instructions on how to clean up your old one.
-
-2. Show you what we are going to install and where. Then we will ask
-   if you are ready to continue.
-
-3. Create the system users and groups that the Nix daemon uses to run
-   builds.
-
-4. Perform the basic installation of the Nix files daemon.
-
-5. Configure your shell to import special Nix Profile files, so you
-   can use Nix.
-
-6. Start the Nix daemon.
-
-EOF
-
-    if ui_confirm "Would you like to see a more detailed list of what we will do?"; then
-        cat <<EOF
-
-We will:
-
- - make sure your computer doesn't already have Nix files
-   (if it does, I will tell you how to clean them up.)
- - create local users (see the list above for the users we'll make)
- - create a local group ($NIX_BUILD_GROUP_NAME)
- - install Nix in to $NIX_ROOT
- - create a configuration file in /etc/nix
- - set up the "default profile" by creating some Nix-related files in
-   $ROOT_HOME
-EOF
-        for profile_target in "${PROFILE_TARGETS[@]}"; do
-            if [ -e "$profile_target" ]; then
-                cat <<EOF
- - back up $profile_target to $profile_target$PROFILE_BACKUP_SUFFIX
- - update $profile_target to include some Nix configuration
-EOF
-            fi
-        done
-        poly_service_setup_note
-        if ! ui_confirm "Ready to continue?"; then
-            failure <<EOF
-Okay, maybe you would like to talk to the team.
-EOF
-        fi
-    fi
-}
-
-chat_about_sudo() {
-    header "let's talk about sudo"
-
-    if headless; then
-        cat <<EOF
-This script is going to call sudo a lot. Normally, it would show you
-exactly what commands it is running and why. However, the script is
-run in a headless fashion, like this:
-
-  $ curl https://nixos.org/nix/install | sh
-
-or maybe in a CI pipeline. Because of that, we're going to skip the
-verbose output in the interest of brevity.
-
-If you would like to
-see the output, try like this:
-
-  $ curl -o install-nix https://nixos.org/nix/install
-  $ sh ./install-nix
-
-EOF
-        return 0
-    fi
-
-    cat <<EOF
-This script is going to call sudo a lot. Every time we do, it'll
-output exactly what it'll do, and why.
-
-Just like this:
-EOF
-
-    __sudo "to demonstrate how our sudo prompts look" \
-           echo "this is a sudo prompt"
-
-    cat <<EOF
-
-This might look scary, but everything can be undone by running just a
-few commands. We used to ask you to confirm each time sudo ran, but it
-was too many times. Instead, I'll just ask you this one time:
-
-EOF
-    if ui_confirm "Can we use sudo?"; then
-        ok "Yay! Thanks! Let's get going!"
-    else
-        failure <<EOF
-That is okay, but we can't install.
-EOF
-    fi
-}
-
-install_from_extracted_nix() {
-    (
-        cd "$EXTRACTED_NIX_PATH"
-
-        _sudo "to copy the basic Nix files to the new store at $NIX_ROOT/store" \
-              rsync -rlpt ./store/* "$NIX_ROOT/store/"
-
-        if [ -d "$NIX_INSTALLED_NIX" ]; then
-            echo "      Alright! We have our first nix at $NIX_INSTALLED_NIX"
-        else
-            failure <<EOF
-Something went wrong, and I didn't find Nix installed at
-$NIX_INSTALLED_NIX.
-EOF
-        fi
-
-        cat ./.reginfo \
-            | _sudo "to load data for the first time in to the Nix Database" \
-                   "$NIX_INSTALLED_NIX/bin/nix-store" --load-db
-
-        echo "      Just finished getting the nix database ready."
-    )
-}
-
-shell_source_lines() {
-    cat <<EOF
-
-# Nix
-if [ -e '$PROFILE_NIX_FILE' ]; then
-  . '$PROFILE_NIX_FILE'
-fi
-# End Nix
-
-EOF
-}
-
-configure_shell_profile() {
-    # If there is an /etc/profile.d directory, we want to ensure there
-    # is a nix.sh within it, so we can use the following loop to add
-    # the source lines to it. Note that I'm _not_ adding the source
-    # lines here, because we want to be using the regular machinery.
-    #
-    # If we go around that machinery, it becomes more complicated and
-    # adds complications to the uninstall instruction generator and
-    # old instruction sniffer as well.
-    if [ -d /etc/profile.d ]; then
-        _sudo "create a stub /etc/profile.d/nix.sh which will be updated" \
-              touch /etc/profile.d/nix.sh
-    fi
-
-    for profile_target in "${PROFILE_TARGETS[@]}"; do
-        if [ -e "$profile_target" ]; then
-            _sudo "to back up your current $profile_target to $profile_target$PROFILE_BACKUP_SUFFIX" \
-                  cp "$profile_target" "$profile_target$PROFILE_BACKUP_SUFFIX"
-
-            shell_source_lines \
-                | _sudo "extend your $profile_target with nix-daemon settings" \
-                        tee -a "$profile_target"
-        fi
-    done
-}
-
-setup_default_profile() {
-    _sudo "to installing a bootstrapping Nix in to the default Profile" \
-          HOME="$ROOT_HOME" "$NIX_INSTALLED_NIX/bin/nix-env" -i "$NIX_INSTALLED_NIX"
-
-    if [ -z "${NIX_SSL_CERT_FILE:-}" ] || ! [ -f "${NIX_SSL_CERT_FILE:-}" ]; then
-        _sudo "to installing a bootstrapping SSL certificate just for Nix in to the default Profile" \
-              HOME="$ROOT_HOME" "$NIX_INSTALLED_NIX/bin/nix-env" -i "$NIX_INSTALLED_CACERT"
-        export NIX_SSL_CERT_FILE=/nix/var/nix/profiles/default/etc/ssl/certs/ca-bundle.crt
-    fi
-
-    # Have to explicitly pass NIX_SSL_CERT_FILE as part of the sudo call,
-    # otherwise it will be lost in environments where sudo doesn't pass
-    # all the environment variables by default.
-    _sudo "to update the default channel in the default profile" \
-          HOME="$ROOT_HOME" NIX_SSL_CERT_FILE="$NIX_SSL_CERT_FILE" "$NIX_INSTALLED_NIX/bin/nix-channel" --update nixpkgs \
-          || channel_update_failed=1
-
-}
-
-
-place_nix_configuration() {
-    cat <<EOF > "$SCRATCH/nix.conf"
-build-users-group = $NIX_BUILD_GROUP_NAME
-EOF
-    _sudo "to place the default nix daemon configuration (part 2)" \
-          install -m 0664 "$SCRATCH/nix.conf" /etc/nix/nix.conf
-}
-
-main() {
-    if [ "$(uname -s)" = "Darwin" ]; then
-        # shellcheck source=./install-darwin-multi-user.sh
-        . "$EXTRACTED_NIX_PATH/install-darwin-multi-user.sh"
-    elif [ "$(uname -s)" = "Linux" ]; then
-        if [ -e /run/systemd/system ]; then
-            # shellcheck source=./install-systemd-multi-user.sh
-            . "$EXTRACTED_NIX_PATH/install-systemd-multi-user.sh"
-        else
-            failure "Sorry, the multi-user installation requires systemd on Linux (detected using /run/systemd/system)"
-        fi
-    else
-        failure "Sorry, I don't know what to do on $(uname)"
-    fi
-
-    welcome_to_nix
-    chat_about_sudo
-
-    if [ "${ALLOW_PREEXISTING_INSTALLATION:-}" = "" ]; then
-        validate_starting_assumptions
-    fi
-
-    setup_report
-
-    if ! ui_confirm "Ready to continue?"; then
-        ok "Alright, no changes have been made :)"
-        contactme
-        trap finish_cleanup EXIT
-        exit 1
-    fi
-
-    create_build_group
-    create_build_users
-    create_directories
-    place_channel_configuration
-    install_from_extracted_nix
-
-    configure_shell_profile
-
-    set +eu
-    . /etc/profile
-    set -eu
-
-    setup_default_profile
-    place_nix_configuration
-    poly_configure_nix_daemon_service
-
-    trap finish_success EXIT
-}
-
-
-main
diff --git a/third_party/nix/scripts/install-nix-from-closure.sh b/third_party/nix/scripts/install-nix-from-closure.sh
deleted file mode 100644
index 3f15818547ab..000000000000
--- a/third_party/nix/scripts/install-nix-from-closure.sh
+++ /dev/null
@@ -1,180 +0,0 @@
-#!/bin/sh
-
-set -e
-
-dest="/nix"
-self="$(dirname "$0")"
-nix="@nix@"
-cacert="@cacert@"
-
-
-if ! [ -e "$self/.reginfo" ]; then
-    echo "$0: incomplete installer (.reginfo is missing)" >&2
-fi
-
-if [ -z "$USER" ] && ! USER=$(id -u -n); then
-    echo "$0: \$USER is not set" >&2
-    exit 1
-fi
-
-if [ -z "$HOME" ]; then
-    echo "$0: \$HOME is not set" >&2
-    exit 1
-fi
-
-# macOS support for 10.12.6 or higher
-if [ "$(uname -s)" = "Darwin" ]; then
-    macos_major=$(sw_vers -productVersion | cut -d '.' -f 2)
-    macos_minor=$(sw_vers -productVersion | cut -d '.' -f 3)
-    if [ "$macos_major" -lt 12 ] || { [ "$macos_major" -eq 12 ] && [ "$macos_minor" -lt 6 ]; }; then
-        echo "$0: macOS $(sw_vers -productVersion) is not supported, upgrade to 10.12.6 or higher"
-        exit 1
-    fi
-fi
-
-# Determine if we could use the multi-user installer or not
-if [ "$(uname -s)" = "Darwin" ]; then
-    echo "Note: a multi-user installation is possible. See https://nixos.org/nix/manual/#sect-multi-user-installation" >&2
-elif [ "$(uname -s)" = "Linux" ] && [ -e /run/systemd/system ]; then
-    echo "Note: a multi-user installation is possible. See https://nixos.org/nix/manual/#sect-multi-user-installation" >&2
-fi
-
-INSTALL_MODE=no-daemon
-# Trivially handle the --daemon / --no-daemon options
-if [ "x${1:-}" = "x--no-daemon" ]; then
-    INSTALL_MODE=no-daemon
-elif [ "x${1:-}" = "x--daemon" ]; then
-    INSTALL_MODE=daemon
-elif [ "x${1:-}" != "x" ]; then
-    (
-        echo "Nix Installer [--daemon|--no-daemon]"
-
-        echo "Choose installation method."
-        echo ""
-        echo " --daemon:    Installs and configures a background daemon that manages the store,"
-        echo "              providing multi-user support and better isolation for local builds."
-        echo "              Both for security and reproducibility, this method is recommended if"
-        echo "              supported on your platform."
-        echo "              See https://nixos.org/nix/manual/#sect-multi-user-installation"
-        echo ""
-        echo " --no-daemon: Simple, single-user installation that does not require root and is"
-        echo "              trivial to uninstall."
-        echo "              (default)"
-        echo ""
-    ) >&2
-    exit
-fi
-
-if [ "$INSTALL_MODE" = "daemon" ]; then
-    printf '\e[1;31mSwitching to the Daemon-based Installer\e[0m\n'
-    exec "$self/install-multi-user"
-    exit 0
-fi
-
-if [ "$(id -u)" -eq 0 ]; then
-    printf '\e[1;31mwarning: installing Nix as root is not supported by this script!\e[0m\n'
-fi
-
-echo "performing a single-user installation of Nix..." >&2
-
-if ! [ -e $dest ]; then
-    cmd="mkdir -m 0755 $dest && chown $USER $dest"
-    echo "directory $dest does not exist; creating it by running '$cmd' using sudo" >&2
-    if ! sudo sh -c "$cmd"; then
-        echo "$0: please manually run '$cmd' as root to create $dest" >&2
-        exit 1
-    fi
-fi
-
-if ! [ -w $dest ]; then
-    echo "$0: directory $dest exists, but is not writable by you. This could indicate that another user has already performed a single-user installation of Nix on this system. If you wish to enable multi-user support see http://nixos.org/nix/manual/#ssec-multi-user. If you wish to continue with a single-user install for $USER please run 'chown -R $USER $dest' as root." >&2
-    exit 1
-fi
-
-mkdir -p $dest/store
-
-printf "copying Nix to %s..." "${dest}/store" >&2
-
-for i in $(cd "$self/store" >/dev/null && echo ./*); do
-    printf "." >&2
-    i_tmp="$dest/store/$i.$$"
-    if [ -e "$i_tmp" ]; then
-        rm -rf "$i_tmp"
-    fi
-    if ! [ -e "$dest/store/$i" ]; then
-        cp -Rp "$self/store/$i" "$i_tmp"
-        chmod -R a-w "$i_tmp"
-        chmod +w "$i_tmp"
-        mv "$i_tmp" "$dest/store/$i"
-        chmod -w "$dest/store/$i"
-    fi
-done
-echo "" >&2
-
-if ! "$nix/bin/nix-store" --load-db < "$self/.reginfo"; then
-    echo "$0: unable to register valid paths" >&2
-    exit 1
-fi
-
-. "$nix/etc/profile.d/nix.sh"
-
-if ! "$nix/bin/nix-env" -i "$nix"; then
-    echo "$0: unable to install Nix into your default profile" >&2
-    exit 1
-fi
-
-# Install an SSL certificate bundle.
-if [ -z "$NIX_SSL_CERT_FILE" ] || ! [ -f "$NIX_SSL_CERT_FILE" ]; then
-    $nix/bin/nix-env -i "$cacert"
-    export NIX_SSL_CERT_FILE="$HOME/.nix-profile/etc/ssl/certs/ca-bundle.crt"
-fi
-
-# Subscribe the user to the Nixpkgs channel and fetch it.
-if ! $nix/bin/nix-channel --list | grep -q "^nixpkgs "; then
-    $nix/bin/nix-channel --add https://nixos.org/channels/nixpkgs-unstable
-fi
-if [ -z "$_NIX_INSTALLER_TEST" ]; then
-    if ! $nix/bin/nix-channel --update nixpkgs; then
-        echo "Fetching the nixpkgs channel failed. (Are you offline?)"
-        echo "To try again later, run \"nix-channel --update nixpkgs\"."
-    fi
-fi
-
-added=
-p=$HOME/.nix-profile/etc/profile.d/nix.sh
-if [ -z "$NIX_INSTALLER_NO_MODIFY_PROFILE" ]; then
-    # Make the shell source nix.sh during login.
-    for i in .bash_profile .bash_login .profile; do
-        fn="$HOME/$i"
-        if [ -w "$fn" ]; then
-            if ! grep -q "$p" "$fn"; then
-                echo "modifying $fn..." >&2
-                echo "if [ -e $p ]; then . $p; fi # added by Nix installer" >> "$fn"
-            fi
-            added=1
-            break
-        fi
-    done
-fi
-
-if [ -z "$added" ]; then
-    cat >&2 <<EOF
-
-Installation finished!  To ensure that the necessary environment
-variables are set, please add the line
-
-  . $p
-
-to your shell profile (e.g. ~/.profile).
-EOF
-else
-    cat >&2 <<EOF
-
-Installation finished!  To ensure that the necessary environment
-variables are set, either log in again, or type
-
-  . $p
-
-in your shell.
-EOF
-fi
diff --git a/third_party/nix/scripts/install-systemd-multi-user.sh b/third_party/nix/scripts/install-systemd-multi-user.sh
deleted file mode 100755
index bef3ac4f991f..000000000000
--- a/third_party/nix/scripts/install-systemd-multi-user.sh
+++ /dev/null
@@ -1,188 +0,0 @@
-#!/usr/bin/env bash
-
-set -eu
-set -o pipefail
-
-readonly SERVICE_SRC=/lib/systemd/system/nix-daemon.service
-readonly SERVICE_DEST=/etc/systemd/system/nix-daemon.service
-
-readonly SOCKET_SRC=/lib/systemd/system/nix-daemon.socket
-readonly SOCKET_DEST=/etc/systemd/system/nix-daemon.socket
-
-
-# Path for the systemd override unit file to contain the proxy settings
-readonly SERVICE_OVERRIDE=${SERVICE_DEST}.d/override.conf
-
-create_systemd_override() {
-     header "Configuring proxy for the nix-daemon service"
-    _sudo "create directory for systemd unit override" mkdir -p "$(dirname $SERVICE_OVERRIDE)"
-    cat <<EOF | _sudo "create systemd unit override" tee "$SERVICE_OVERRIDE"
-[Service]
-$1
-EOF
-}
-
-# Gather all non-empty proxy environment variables into a string
-create_systemd_proxy_env() {
-    vars="http_proxy https_proxy ftp_proxy no_proxy HTTP_PROXY HTTPS_PROXY FTP_PROXY NO_PROXY"
-    for v in $vars; do
-        if [ "x${!v:-}" != "x" ]; then
-            echo "Environment=${v}=${!v}"
-        fi
-    done
-}
-
-handle_network_proxy() {
-    # Create a systemd unit override with proxy environment variables
-    # if any proxy environment variables are not empty.
-    PROXY_ENV_STRING=$(create_systemd_proxy_env)
-    if [ -n "${PROXY_ENV_STRING}" ]; then
-        create_systemd_override "${PROXY_ENV_STRING}"
-    fi
-}
-
-poly_validate_assumptions() {
-    if [ "$(uname -s)" != "Linux" ]; then
-        failure "This script is for use with Linux!"
-    fi
-}
-
-poly_service_installed_check() {
-    [ "$(systemctl is-enabled nix-daemon.service)" = "linked" ] \
-        || [ "$(systemctl is-enabled nix-daemon.socket)" = "enabled" ]
-}
-
-poly_service_uninstall_directions() {
-        cat <<EOF
-$1. Delete the systemd service and socket units
-
-  sudo systemctl stop nix-daemon.socket
-  sudo systemctl stop nix-daemon.service
-  sudo systemctl disable nix-daemon.socket
-  sudo systemctl disable nix-daemon.service
-  sudo systemctl daemon-reload
-EOF
-}
-
-poly_service_setup_note() {
-    cat <<EOF
- - load and start a service (at $SERVICE_DEST
-   and $SOCKET_DEST) for nix-daemon
-
-EOF
-}
-
-poly_configure_nix_daemon_service() {
-    _sudo "to set up the nix-daemon service" \
-          systemctl link "/nix/var/nix/profiles/default$SERVICE_SRC"
-
-    _sudo "to set up the nix-daemon socket service" \
-          systemctl enable "/nix/var/nix/profiles/default$SOCKET_SRC"
-
-    handle_network_proxy
-
-    _sudo "to load the systemd unit for nix-daemon" \
-          systemctl daemon-reload
-
-    _sudo "to start the nix-daemon.socket" \
-          systemctl start nix-daemon.socket
-
-    _sudo "to start the nix-daemon.service" \
-          systemctl start nix-daemon.service
-
-}
-
-poly_group_exists() {
-    getent group "$1" > /dev/null 2>&1
-}
-
-poly_group_id_get() {
-    getent group "$1" | cut -d: -f3
-}
-
-poly_create_build_group() {
-    _sudo "Create the Nix build group, $NIX_BUILD_GROUP_NAME" \
-          groupadd -g "$NIX_BUILD_GROUP_ID" --system \
-          "$NIX_BUILD_GROUP_NAME" >&2
-}
-
-poly_user_exists() {
-    getent passwd "$1" > /dev/null 2>&1
-}
-
-poly_user_id_get() {
-    getent passwd "$1" | cut -d: -f3
-}
-
-poly_user_hidden_get() {
-    echo "1"
-}
-
-poly_user_hidden_set() {
-    true
-}
-
-poly_user_home_get() {
-    getent passwd "$1" | cut -d: -f6
-}
-
-poly_user_home_set() {
-    _sudo "in order to give $1 a safe home directory" \
-          usermod --home "$2" "$1"
-}
-
-poly_user_note_get() {
-    getent passwd "$1" | cut -d: -f5
-}
-
-poly_user_note_set() {
-    _sudo "in order to give $1 a useful comment" \
-          usermod --comment "$2" "$1"
-}
-
-poly_user_shell_get() {
-    getent passwd "$1" | cut -d: -f7
-}
-
-poly_user_shell_set() {
-    _sudo "in order to prevent $1 from logging in" \
-          usermod --shell "$2" "$1"
-}
-
-poly_user_in_group_check() {
-    groups "$1" | grep -q "$2" > /dev/null 2>&1
-}
-
-poly_user_in_group_set() {
-    _sudo "Add $1 to the $2 group"\
-          usermod --append --groups "$2" "$1"
-}
-
-poly_user_primary_group_get() {
-    getent passwd "$1" | cut -d: -f4
-}
-
-poly_user_primary_group_set() {
-    _sudo "to let the nix daemon use this user for builds (this might seem redundant, but there are two concepts of group membership)" \
-          usermod --gid "$2" "$1"
-
-}
-
-poly_create_build_user() {
-    username=$1
-    uid=$2
-    builder_num=$3
-
-    _sudo "Creating the Nix build user, $username" \
-          useradd \
-          --home-dir /var/empty \
-          --comment "Nix build user $builder_num" \
-          --gid "$NIX_BUILD_GROUP_ID" \
-          --groups "$NIX_BUILD_GROUP_NAME" \
-          --no-user-group \
-          --system \
-          --shell /sbin/nologin \
-          --uid "$uid" \
-          --password "!" \
-          "$username"
-}
diff --git a/third_party/nix/scripts/install.in b/third_party/nix/scripts/install.in
deleted file mode 100644
index 902758b138a5..000000000000
--- a/third_party/nix/scripts/install.in
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/sh
-
-# This script installs the Nix package manager on your system by
-# downloading a binary distribution and running its installer script
-# (which in turn creates and populates /nix).
-
-{ # Prevent execution if this script was only partially downloaded
-oops() {
-    echo "$0:" "$@" >&2
-    exit 1
-}
-
-tmpDir="$(mktemp -d -t nix-binary-tarball-unpack.XXXXXXXXXX || \
-          oops "Can't create temporary directory for downloading the Nix binary tarball")"
-cleanup() {
-    rm -rf "$tmpDir"
-}
-trap cleanup EXIT INT QUIT TERM
-
-require_util() {
-    command -v "$1" > /dev/null 2>&1 ||
-        oops "you do not have '$1' installed, which I need to $2"
-}
-
-case "$(uname -s).$(uname -m)" in
-    Linux.x86_64) system=x86_64-linux; hash=@binaryTarball_x86_64-linux@;;
-    Linux.i?86) system=i686-linux; hash=@binaryTarball_i686-linux@;;
-    Linux.aarch64) system=aarch64-linux; hash=@binaryTarball_aarch64-linux@;;
-    Darwin.x86_64) system=x86_64-darwin; hash=@binaryTarball_x86_64-darwin@;;
-    *) oops "sorry, there is no binary distribution of Nix for your platform";;
-esac
-
-url="https://nixos.org/releases/nix/nix-@nixVersion@/nix-@nixVersion@-$system.tar.xz"
-
-tarball="$tmpDir/$(basename "$tmpDir/nix-@nixVersion@-$system.tar.xz")"
-
-require_util curl "download the binary tarball"
-require_util tar "unpack the binary tarball"
-
-echo "downloading Nix @nixVersion@ binary tarball for $system from '$url' to '$tmpDir'..."
-curl -L "$url" -o "$tarball" || oops "failed to download '$url'"
-
-if command -v sha256sum > /dev/null 2>&1; then
-    hash2="$(sha256sum -b "$tarball" | cut -c1-64)"
-elif command -v shasum > /dev/null 2>&1; then
-    hash2="$(shasum -a 256 -b "$tarball" | cut -c1-64)"
-elif command -v openssl > /dev/null 2>&1; then
-    hash2="$(openssl dgst -r -sha256 "$tarball" | cut -c1-64)"
-else
-    oops "cannot verify the SHA-256 hash of '$url'; you need one of 'shasum', 'sha256sum', or 'openssl'"
-fi
-
-if [ "$hash" != "$hash2" ]; then
-    oops "SHA-256 hash mismatch in '$url'; expected $hash, got $hash2"
-fi
-
-unpack=$tmpDir/unpack
-mkdir -p "$unpack"
-tar -xf "$tarball" -C "$unpack" || oops "failed to unpack '$url'"
-
-script=$(echo "$unpack"/*/install)
-
-[ -e "$script" ] || oops "installation script is missing from the binary tarball!"
-"$script" "$@"
-
-} # End of wrapping
diff --git a/third_party/nix/scripts/nix-http-export.cgi.in b/third_party/nix/scripts/nix-http-export.cgi.in
deleted file mode 100755
index 19a505af1c50..000000000000
--- a/third_party/nix/scripts/nix-http-export.cgi.in
+++ /dev/null
@@ -1,51 +0,0 @@
-#! /bin/sh
-
-export HOME=/tmp
-export NIX_REMOTE=daemon
-
-TMP_DIR="${TMP_DIR:-/tmp/nix-export}"
-
-@coreutils@/mkdir -p "$TMP_DIR" || true
-@coreutils@/chmod a+r "$TMP_DIR"
-
-needed_path="?$QUERY_STRING"
-needed_path="${needed_path#*[?&]needed_path=}"
-needed_path="${needed_path%%&*}"
-#needed_path="$(echo $needed_path  | ./unhttp)"
-needed_path="${needed_path//%2B/+}"
-needed_path="${needed_path//%3D/=}"
-
-echo needed_path: "$needed_path" >&2
-
-NIX_STORE="${NIX_STORE_DIR:-/nix/store}"
-
-echo NIX_STORE: "${NIX_STORE}" >&2
-
-full_path="${NIX_STORE}"/"$needed_path"
-
-if [ "$needed_path" != "${needed_path%.drv}" ]; then
-	echo "Status: 403 You should create the derivation file yourself"
-	echo "Content-Type: text/plain"
-	echo
-	echo "Refusing to disclose derivation contents"
-	exit
-fi
-
-if @bindir@/nix-store --check-validity "$full_path"; then
-	if ! [ -e nix-export/"$needed_path".nar.gz ]; then
-		@bindir@/nix-store --export "$full_path" | @gzip@ > "$TMP_DIR"/"$needed_path".nar.gz
-		@coreutils@/ln -fs  "$TMP_DIR"/"$needed_path".nar.gz nix-export/"$needed_path".nar.gz 
-	fi;
-	echo "Status: 301 Moved"
-	echo "Location: nix-export/"$needed_path".nar.gz"
-	echo
-else 
-	echo "Status: 404 No such path found"
-	echo "Content-Type: text/plain"
-	echo
-	echo "Path not found:"
-	echo "$needed_path"
-	echo "checked:"
-	echo "$full_path"
-fi
-
diff --git a/third_party/nix/scripts/nix-profile-daemon.sh.in b/third_party/nix/scripts/nix-profile-daemon.sh.in
deleted file mode 100644
index 47655080a674..000000000000
--- a/third_party/nix/scripts/nix-profile-daemon.sh.in
+++ /dev/null
@@ -1,29 +0,0 @@
-# Only execute this file once per shell.
-if [ -n "${__ETC_PROFILE_NIX_SOURCED:-}" ]; then return; fi
-__ETC_PROFILE_NIX_SOURCED=1
-
-export NIX_USER_PROFILE_DIR="@localstatedir@/nix/profiles/per-user/$USER"
-export NIX_PROFILES="@localstatedir@/nix/profiles/default $HOME/.nix-profile"
-
-# Set $NIX_SSL_CERT_FILE so that Nixpkgs applications like curl work.
-if [ ! -z "${NIX_SSL_CERT_FILE:-}" ]; then
-    : # Allow users to override the NIX_SSL_CERT_FILE
-elif [ -e /etc/ssl/certs/ca-certificates.crt ]; then # NixOS, Ubuntu, Debian, Gentoo, Arch
-    export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-certificates.crt
-elif [ -e /etc/ssl/ca-bundle.pem ]; then # openSUSE Tumbleweed
-    export NIX_SSL_CERT_FILE=/etc/ssl/ca-bundle.pem
-elif [ -e /etc/ssl/certs/ca-bundle.crt ]; then # Old NixOS
-    export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-bundle.crt
-elif [ -e /etc/pki/tls/certs/ca-bundle.crt ]; then # Fedora, CentOS
-    export NIX_SSL_CERT_FILE=/etc/pki/tls/certs/ca-bundle.crt
-else
-  # Fall back to what is in the nix profiles, favouring whatever is defined last.
-  for i in $NIX_PROFILES; do
-    if [ -e $i/etc/ssl/certs/ca-bundle.crt ]; then
-      export NIX_SSL_CERT_FILE=$i/etc/ssl/certs/ca-bundle.crt
-    fi
-  done
-fi
-
-export NIX_PATH="nixpkgs=@localstatedir@/nix/profiles/per-user/root/channels/nixpkgs:@localstatedir@/nix/profiles/per-user/root/channels"
-export PATH="$HOME/.nix-profile/bin:@localstatedir@/nix/profiles/default/bin:$PATH"
diff --git a/third_party/nix/scripts/nix-profile.sh.in b/third_party/nix/scripts/nix-profile.sh.in
deleted file mode 100644
index e15f7cd46b76..000000000000
--- a/third_party/nix/scripts/nix-profile.sh.in
+++ /dev/null
@@ -1,39 +0,0 @@
-if [ -n "$HOME" ] && [ -n "$USER" ]; then
-
-    # Set up the per-user profile.
-    # This part should be kept in sync with nixpkgs:nixos/modules/programs/shell.nix
-
-    NIX_LINK=$HOME/.nix-profile
-
-    NIX_USER_PROFILE_DIR=@localstatedir@/nix/profiles/per-user/$USER
-
-    # Append ~/.nix-defexpr/channels to $NIX_PATH so that <nixpkgs>
-    # paths work when the user has fetched the Nixpkgs channel.
-    export NIX_PATH=${NIX_PATH:+$NIX_PATH:}$HOME/.nix-defexpr/channels
-
-    # Set up environment.
-    # This part should be kept in sync with nixpkgs:nixos/modules/programs/environment.nix
-    export NIX_PROFILES="@localstatedir@/nix/profiles/default $HOME/.nix-profile"
-
-    # Set $NIX_SSL_CERT_FILE so that Nixpkgs applications like curl work.
-    if [ -e /etc/ssl/certs/ca-certificates.crt ]; then # NixOS, Ubuntu, Debian, Gentoo, Arch
-        export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-certificates.crt
-    elif [ -e /etc/ssl/ca-bundle.pem ]; then # openSUSE Tumbleweed
-        export NIX_SSL_CERT_FILE=/etc/ssl/ca-bundle.pem
-    elif [ -e /etc/ssl/certs/ca-bundle.crt ]; then # Old NixOS
-        export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-bundle.crt
-    elif [ -e /etc/pki/tls/certs/ca-bundle.crt ]; then # Fedora, CentOS
-        export NIX_SSL_CERT_FILE=/etc/pki/tls/certs/ca-bundle.crt
-    elif [ -e "$NIX_LINK/etc/ssl/certs/ca-bundle.crt" ]; then # fall back to cacert in Nix profile
-        export NIX_SSL_CERT_FILE="$NIX_LINK/etc/ssl/certs/ca-bundle.crt"
-    elif [ -e "$NIX_LINK/etc/ca-bundle.crt" ]; then # old cacert in Nix profile
-        export NIX_SSL_CERT_FILE="$NIX_LINK/etc/ca-bundle.crt"
-    fi
-
-    if [ -n "${MANPATH-}" ]; then
-        export MANPATH="$NIX_LINK/share/man:$MANPATH"
-    fi
-
-    export PATH="$NIX_LINK/bin:$PATH"
-    unset NIX_LINK NIX_USER_PROFILE_DIR
-fi
diff --git a/third_party/nix/scripts/nix-reduce-build.in b/third_party/nix/scripts/nix-reduce-build.in
deleted file mode 100755
index 50beb9d10b16..000000000000
--- a/third_party/nix/scripts/nix-reduce-build.in
+++ /dev/null
@@ -1,171 +0,0 @@
-#! @bash@
-
-WORKING_DIRECTORY=$(mktemp -d "${TMPDIR:-/tmp}"/nix-reduce-build-XXXXXX);
-cd "$WORKING_DIRECTORY";
-
-if test -z "$1" || test "a--help" = "a$1" ; then
-	echo 'nix-reduce-build (paths or Nix expressions) -- (package sources)' >&2
-	echo As in: >&2
-	echo nix-reduce-build /etc/nixos/nixos -- ssh://user@somewhere.nowhere.example.org >&2
-	echo nix-reduce-build /etc/nixos/nixos -- \\
-	echo "   " \''http://somewhere.nowhere.example.org/nix/nix-http-export.cgi?needed_path='\' >&2
-	echo "  store path name will be added into the end of the URL" >&2
-	echo nix-reduce-build /etc/nixos/nixos -- file://home/user/nar/ >&2
-	echo "  that should be a directory where gzipped 'nix-store --export' ">&2
-	echo "  files are located (they should have .nar.gz extension)"  >&2
-	echo "        Or all together: " >&2
-	echo -e nix-reduce-build /expr.nix /e2.nix -- \\\\\\\n\
-	"    ssh://a@b.example.com http://n.example.com/get-nar?q= file://nar/" >&2
-	echo "        Also supports best-effort local builds of failing expression set:" >&2
-	echo "nix-reduce-build /e.nix -- nix-daemon:// nix-self://" >&2
-	echo "  nix-daemon:// builds using daemon"
-	echo "  nix-self:// builds directly using nix-store from current installation" >&2
-	echo "  nix-daemon-fixed:// and nix-self-fixed:// do the same, but only for" >&2;
-	echo "derivations with specified output hash (sha256, sha1 or md5)." >&2
-	echo "  nix-daemon-substitute:// and nix-self-substitute:// try to substitute" >&2;
-	echo "maximum amount of paths" >&2;
-	echo "  nix-daemon-build:// and nix-self-build:// try to build (not substitute)" >&2;
-	echo "maximum amount of paths" >&2;
-	echo "        If no package sources are specified, required paths are listed." >&2;
-	exit;
-fi;
-
-while ! test "$1" = "--" || test "$1" = "" ; do 
-	echo "$1" >> initial; >&2
-	shift;
-done
-shift;
-echo Will work on $(cat initial | wc -l) targets. >&2
-
-while read ; do
-	case "$REPLY" in 
-		${NIX_STORE_DIR:-/nix/store}/*)
-			echo "$REPLY" >> paths; >&2
-			;;
-		*)
-			(
-				IFS=: ;
-				nix-instantiate $REPLY >> paths;
-			);
-			;;
-	esac;
-done < initial;
-echo Proceeding $(cat paths | wc -l) paths. >&2
-
-while read; do
-	case "$REPLY" in
-		*.drv)
-			echo "$REPLY" >> derivers; >&2
-			;;
-		*)
-			nix-store --query --deriver "$REPLY" >>derivers;
-			;;
-	esac;
-done < paths;
-echo Found $(cat derivers | wc -l) derivers. >&2
-
-cat derivers | xargs nix-store --query -R > derivers-closure;
-echo Proceeding at most $(cat derivers-closure | wc -l) derivers. >&2
-
-cat derivers-closure | egrep '[.]drv$' | xargs nix-store --query --outputs > wanted-paths;
-cat derivers-closure | egrep -v '[.]drv$' >> wanted-paths;
-echo Prepared $(cat wanted-paths | wc -l) paths to get. >&2
-
-cat wanted-paths | xargs nix-store --check-validity --print-invalid > needed-paths;
-echo We need $(cat needed-paths | wc -l) paths. >&2
-
-egrep '[.]drv$' derivers-closure > critical-derivers;
-
-if test -z "$1" ; then
-	cat needed-paths;	
-fi;
-
-refresh_critical_derivers() {
-    echo "Finding needed derivers..." >&2;
-    cat critical-derivers | while read; do
-        if ! (nix-store --query --outputs "$REPLY" | xargs nix-store --check-validity &> /dev/null;); then
-            echo "$REPLY";
-        fi;
-    done > new-critical-derivers;
-    mv new-critical-derivers critical-derivers;
-    echo The needed paths are realized by $(cat critical-derivers | wc -l) derivers. >&2
-}
-
-build_here() {
-    cat critical-derivers | while read; do 
-        echo "Realising $REPLY using nix-daemon" >&2
-        @bindir@/nix-store -r "${REPLY}"
-    done;
-}
-
-try_to_substitute(){
-    cat needed-paths | while read ; do 
-        echo "Building $REPLY using nix-daemon" >&2
-        @bindir@/nix-store -r "${NIX_STORE_DIR:-/nix/store}/${REPLY##*/}"
-    done;
-}
-
-for i in "$@"; do 
-	sshHost="${i#ssh://}";
-	httpHost="${i#http://}";
-	httpsHost="${i#https://}";
-	filePath="${i#file:/}";
-	if [ "$i" != "$sshHost" ]; then
-		cat needed-paths | while read; do 
-			echo "Getting $REPLY and its closure over ssh" >&2
-			nix-copy-closure --from "$sshHost" --gzip "$REPLY" </dev/null || true; 
-		done;
-	elif [ "$i" != "$httpHost" ] || [ "$i" != "$httpsHost" ]; then
-		cat needed-paths | while read; do
-			echo "Getting $REPLY over http/https" >&2
-			curl ${BAD_CERTIFICATE:+-k} -L "$i${REPLY##*/}" | gunzip | nix-store --import;
-		done;
-	elif [ "$i" != "$filePath" ] ; then
-		cat needed-paths | while read; do 
-			echo "Installing $REPLY from file" >&2
-			gunzip < "$filePath/${REPLY##*/}".nar.gz | nix-store --import;
-		done;
-	elif [ "$i" = "nix-daemon://" ] ; then
-		NIX_REMOTE=daemon try_to_substitute;
-		refresh_critical_derivers;
-		NIX_REMOTE=daemon build_here;
-	elif [ "$i" = "nix-self://" ] ; then
-		NIX_REMOTE= try_to_substitute;
-		refresh_critical_derivers;
-		NIX_REMOTE= build_here;
-	elif [ "$i" = "nix-daemon-fixed://" ] ; then
-		refresh_critical_derivers;
-
-		cat critical-derivers | while read; do 
-			if egrep '"(md5|sha1|sha256)"' "$REPLY" &>/dev/null; then
-				echo "Realising $REPLY using nix-daemon" >&2
-				NIX_REMOTE=daemon @bindir@/nix-store -r "${REPLY}"
-			fi;
-		done;
-	elif [ "$i" = "nix-self-fixed://" ] ; then
-		refresh_critical_derivers;
-
-		cat critical-derivers | while read; do 
-			if egrep '"(md5|sha1|sha256)"' "$REPLY" &>/dev/null; then
-				echo "Realising $REPLY using direct Nix build" >&2
-				NIX_REMOTE= @bindir@/nix-store -r "${REPLY}"
-			fi;
-		done;
-	elif [ "$i" = "nix-daemon-substitute://" ] ; then
-		NIX_REMOTE=daemon try_to_substitute;
-	elif [ "$i" = "nix-self-substitute://" ] ; then
-		NIX_REMOTE= try_to_substitute;
-	elif [ "$i" = "nix-daemon-build://" ] ; then
-		refresh_critical_derivers;
-		NIX_REMOTE=daemon build_here;
-	elif [ "$i" = "nix-self-build://" ] ; then
-		refresh_critical_derivers;
-		NIX_REMOTE= build_here;
-	fi;
-	mv needed-paths wanted-paths;
-	cat wanted-paths | xargs nix-store --check-validity --print-invalid > needed-paths;
-	echo We still need $(cat needed-paths | wc -l) paths. >&2
-done;
-
-cd /
-rm -r "$WORKING_DIRECTORY"
diff --git a/third_party/nix/scripts/repl.sh b/third_party/nix/scripts/repl.sh
deleted file mode 100755
index d068e807903a..000000000000
--- a/third_party/nix/scripts/repl.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/usr/bin/env bash
-set -eo pipefail
-
-# Run `nix repl` using a local store, for use during development. Intended to
-# be run from the cmake build directory
-
-if [ "$#" -gt 0 ] && [ "$1" = "--debug" ]; then
-    gdb=(gdb --args)
-    shift 1
-elif [ "$1" = "--rr" ]; then
-    gdb=(rr record)
-    shift 1
-else
-    gdb=()
-fi
-
-make -j 10
-NIX_STORE_DIR=$(pwd)/nix/store \
-    NIX_LOG_DIR=$(pwd)/nix/var/log/nix \
-    NIX_STATE_DIR=$(pwd)/nix/var/nix \
-    XDG_CACHE_HOME=$(pwd)/cache \
-    NIX_REMOTE=daemon \
-    ${gdb[*]} ./src/nix repl "$@"
diff --git a/third_party/nix/scripts/setup_store.sh b/third_party/nix/scripts/setup_store.sh
deleted file mode 100755
index ee96c8d3b853..000000000000
--- a/third_party/nix/scripts/setup_store.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-# Setup a store for local development rooted at the current directory, and
-# compatible with the scripts in this directory (repl.sh, build.sh, eval.sh,
-# daemon.sh, etc). Intended to be run from the cmake build directory
-
-mkdir -p nix/store nix/var/nix nix/var/log/nix
-ln -s $(pwd)/src/nix ./nix/build-remote
-mkdir -p $(dirname "$(pwd)${SANDBOX_SHELL}")
-cp "${SANDBOX_SHELL}" "$(pwd)${SANDBOX_SHELL}"