about summary refs log tree commit diff
path: root/third_party/nix/doc/manual/packages
diff options
context:
space:
mode:
authorVincent Ambo <mail@tazj.in>2022-05-18T15·39+0200
committerclbot <clbot@tvl.fyi>2022-05-19T14·08+0000
commitd127f9bd0e7b9b2e0df2de8a2227f77c0907468d (patch)
tree68455040d88b8e0c2817601db88ede450873ff8e /third_party/nix/doc/manual/packages
parentc85291c602ac666421627d6934ebc6d5be1b93e1 (diff)
chore(3p/nix): unvendor tvix 0.1 r/4098
Nothing is using this now, and we'll likely never pick this up again,
but we learned a lot in the process.

Every now and then this breaks in some bizarre way on channel bumps
and it's just a waste of time to maintain that.

Change-Id: Idcf2f5acd4ca7070ce18d7149cbfc0d967dc0a44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5632
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Diffstat (limited to 'third_party/nix/doc/manual/packages')
-rw-r--r--third_party/nix/doc/manual/packages/basic-package-mgmt.xml194
-rw-r--r--third_party/nix/doc/manual/packages/binary-cache-substituter.xml70
-rw-r--r--third_party/nix/doc/manual/packages/channels.xml57
-rw-r--r--third_party/nix/doc/manual/packages/copy-closure.xml50
-rw-r--r--third_party/nix/doc/manual/packages/garbage-collection.xml86
-rw-r--r--third_party/nix/doc/manual/packages/garbage-collector-roots.xml29
-rw-r--r--third_party/nix/doc/manual/packages/package-management.xml23
-rw-r--r--third_party/nix/doc/manual/packages/profiles.xml158
-rw-r--r--third_party/nix/doc/manual/packages/s3-substituter.xml182
-rw-r--r--third_party/nix/doc/manual/packages/sharing-packages.xml20
-rw-r--r--third_party/nix/doc/manual/packages/ssh-substituter.xml73
11 files changed, 0 insertions, 942 deletions
diff --git a/third_party/nix/doc/manual/packages/basic-package-mgmt.xml b/third_party/nix/doc/manual/packages/basic-package-mgmt.xml
deleted file mode 100644
index 0f21297f31b9..000000000000
--- a/third_party/nix/doc/manual/packages/basic-package-mgmt.xml
+++ /dev/null
@@ -1,194 +0,0 @@
-<chapter xmlns="http://docbook.org/ns/docbook"
-      xmlns:xlink="http://www.w3.org/1999/xlink"
-      xmlns:xi="http://www.w3.org/2001/XInclude"
-      version="5.0"
-      xml:id="ch-basic-package-mgmt">
-
-<title>Basic Package Management</title>
-
-<para>The main command for package management is <link
-linkend="sec-nix-env"><command>nix-env</command></link>.  You can use
-it to install, upgrade, and erase packages, and to query what
-packages are installed or are available for installation.</para>
-
-<para>In Nix, different users can have different “views”
-on the set of installed applications.  That is, there might be lots of
-applications present on the system (possibly in many different
-versions), but users can have a specific selection of those active —
-where “active” just means that it appears in a directory
-in the user’s <envar>PATH</envar>.  Such a view on the set of
-installed applications is called a <emphasis>user
-environment</emphasis>, which is just a directory tree consisting of
-symlinks to the files of the active applications.  </para>
-
-<para>Components are installed from a set of <emphasis>Nix
-expressions</emphasis> that tell Nix how to build those packages,
-including, if necessary, their dependencies.  There is a collection of
-Nix expressions called the Nixpkgs package collection that contains
-packages ranging from basic development stuff such as GCC and Glibc,
-to end-user applications like Mozilla Firefox.  (Nix is however not
-tied to the Nixpkgs package collection; you could write your own Nix
-expressions based on Nixpkgs, or completely new ones.)</para>
-
-<para>You can manually download the latest version of Nixpkgs from
-<link xlink:href='http://nixos.org/nixpkgs/download.html'/>. However,
-it’s much more convenient to use the Nixpkgs
-<emphasis>channel</emphasis>, since it makes it easy to stay up to
-date with new versions of Nixpkgs. (Channels are described in more
-detail in <xref linkend="sec-channels"/>.) Nixpkgs is automatically
-added to your list of “subscribed” channels when you install
-Nix. If this is not the case for some reason, you can add it as
-follows:
-
-<screen>
-$ nix-channel --add https://nixos.org/channels/nixpkgs-unstable
-$ nix-channel --update
-</screen>
-
-</para>
-
-<note><para>On NixOS, you’re automatically subscribed to a NixOS
-channel corresponding to your NixOS major release
-(e.g. <uri>http://nixos.org/channels/nixos-14.12</uri>). A NixOS
-channel is identical to the Nixpkgs channel, except that it contains
-only Linux binaries and is updated only if a set of regression tests
-succeed.</para></note>
-
-<para>You can view the set of available packages in Nixpkgs:
-
-<screen>
-$ nix-env -qa
-aterm-2.2
-bash-3.0
-binutils-2.15
-bison-1.875d
-blackdown-1.4.2
-bzip2-1.0.2
-…</screen>
-
-The flag <option>-q</option> specifies a query operation, and
-<option>-a</option> means that you want to show the “available” (i.e.,
-installable) packages, as opposed to the installed packages. If you
-downloaded Nixpkgs yourself, or if you checked it out from GitHub,
-then you need to pass the path to your Nixpkgs tree using the
-<option>-f</option> flag:
-
-<screen>
-$ nix-env -qaf <replaceable>/path/to/nixpkgs</replaceable>
-</screen>
-
-where <replaceable>/path/to/nixpkgs</replaceable> is where you’ve
-unpacked or checked out Nixpkgs.</para>
-
-<para>You can select specific packages by name:
-
-<screen>
-$ nix-env -qa firefox
-firefox-34.0.5
-firefox-with-plugins-34.0.5
-</screen>
-
-and using regular expressions:
-
-<screen>
-$ nix-env -qa 'firefox.*'
-</screen>
-
-</para>
-
-<para>It is also possible to see the <emphasis>status</emphasis> of
-available packages, i.e., whether they are installed into the user
-environment and/or present in the system:
-
-<screen>
-$ nix-env -qas
-…
--PS bash-3.0
---S binutils-2.15
-IPS bison-1.875d
-…</screen>
-
-The first character (<literal>I</literal>) indicates whether the
-package is installed in your current user environment.  The second
-(<literal>P</literal>) indicates whether it is present on your system
-(in which case installing it into your user environment would be a
-very quick operation).  The last one (<literal>S</literal>) indicates
-whether there is a so-called <emphasis>substitute</emphasis> for the
-package, which is Nix’s mechanism for doing binary deployment.  It
-just means that Nix knows that it can fetch a pre-built package from
-somewhere (typically a network server) instead of building it
-locally.</para>
-
-<para>You can install a package using <literal>nix-env -i</literal>.
-For instance,
-
-<screen>
-$ nix-env -i subversion</screen>
-
-will install the package called <literal>subversion</literal> (which
-is, of course, the <link
-xlink:href='http://subversion.tigris.org/'>Subversion version
-management system</link>).</para>
-
-<note><para>When you ask Nix to install a package, it will first try
-to get it in pre-compiled form from a <emphasis>binary
-cache</emphasis>. By default, Nix will use the binary cache
-<uri>https://cache.nixos.org</uri>; it contains binaries for most
-packages in Nixpkgs. Only if no binary is available in the binary
-cache, Nix will build the package from source. So if <literal>nix-env
--i subversion</literal> results in Nix building stuff from source,
-then either the package is not built for your platform by the Nixpkgs
-build servers, or your version of Nixpkgs is too old or too new. For
-instance, if you have a very recent checkout of Nixpkgs, then the
-Nixpkgs build servers may not have had a chance to build everything
-and upload the resulting binaries to
-<uri>https://cache.nixos.org</uri>. The Nixpkgs channel is only
-updated after all binaries have been uploaded to the cache, so if you
-stick to the Nixpkgs channel (rather than using a Git checkout of the
-Nixpkgs tree), you will get binaries for most packages.</para></note>
-
-<para>Naturally, packages can also be uninstalled:
-
-<screen>
-$ nix-env -e subversion</screen>
-
-</para>
-
-<para>Upgrading to a new version is just as easy.  If you have a new
-release of Nix Packages, you can do:
-
-<screen>
-$ nix-env -u subversion</screen>
-
-This will <emphasis>only</emphasis> upgrade Subversion if there is a
-“newer” version in the new set of Nix expressions, as
-defined by some pretty arbitrary rules regarding ordering of version
-numbers (which generally do what you’d expect of them).  To just
-unconditionally replace Subversion with whatever version is in the Nix
-expressions, use <parameter>-i</parameter> instead of
-<parameter>-u</parameter>; <parameter>-i</parameter> will remove
-whatever version is already installed.</para>
-
-<para>You can also upgrade all packages for which there are newer
-versions:
-
-<screen>
-$ nix-env -u</screen>
-
-</para>
-
-<para>Sometimes it’s useful to be able to ask what
-<command>nix-env</command> would do, without actually doing it.  For
-instance, to find out what packages would be upgraded by
-<literal>nix-env -u</literal>, you can do
-
-<screen>
-$ nix-env -u --dry-run
-(dry run; not doing anything)
-upgrading `libxslt-1.1.0' to `libxslt-1.1.10'
-upgrading `graphviz-1.10' to `graphviz-1.12'
-upgrading `coreutils-5.0' to `coreutils-5.2.1'</screen>
-
-</para>
-
-</chapter>
diff --git a/third_party/nix/doc/manual/packages/binary-cache-substituter.xml b/third_party/nix/doc/manual/packages/binary-cache-substituter.xml
deleted file mode 100644
index c6ceb9c80610..000000000000
--- a/third_party/nix/doc/manual/packages/binary-cache-substituter.xml
+++ /dev/null
@@ -1,70 +0,0 @@
-<section xmlns="http://docbook.org/ns/docbook"
-         xmlns:xlink="http://www.w3.org/1999/xlink"
-         xmlns:xi="http://www.w3.org/2001/XInclude"
-         version="5.0"
-         xml:id="ssec-binary-cache-substituter">
-
-<title>Serving a Nix store via HTTP</title>
-
-<para>You can easily share the Nix store of a machine via HTTP. This
-allows other machines to fetch store paths from that machine to speed
-up installations. It uses the same <emphasis>binary cache</emphasis>
-mechanism that Nix usually uses to fetch pre-built binaries from
-<uri>https://cache.nixos.org</uri>.</para>
-
-<para>The daemon that handles binary cache requests via HTTP,
-<command>nix-serve</command>, is not part of the Nix distribution, but
-you can install it from Nixpkgs:
-
-<screen>
-$ nix-env -i nix-serve
-</screen>
-
-You can then start the server, listening for HTTP connections on
-whatever port you like:
-
-<screen>
-$ nix-serve -p 8080
-</screen>
-
-To check whether it works, try the following on the client:
-
-<screen>
-$ curl http://avalon:8080/nix-cache-info
-</screen>
-
-which should print something like:
-
-<screen>
-StoreDir: /nix/store
-WantMassQuery: 1
-Priority: 30
-</screen>
-
-</para>
-
-<para>On the client side, you can tell Nix to use your binary cache
-using <option>--option extra-binary-caches</option>, e.g.:
-
-<screen>
-$ nix-env -i firefox --option extra-binary-caches http://avalon:8080/
-</screen>
-
-The option <option>extra-binary-caches</option> tells Nix to use this
-binary cache in addition to your default caches, such as
-<uri>https://cache.nixos.org</uri>. Thus, for any path in the closure
-of Firefox, Nix will first check if the path is available on the
-server <literal>avalon</literal> or another binary caches. If not, it
-will fall back to building from source.</para>
-
-<para>You can also tell Nix to always use your binary cache by adding
-a line to the <filename linkend="sec-conf-file">nix.conf</filename>
-configuration file like this:
-
-<programlisting>
-binary-caches = http://avalon:8080/ https://cache.nixos.org/
-</programlisting>
-
-</para>
-
-</section>
diff --git a/third_party/nix/doc/manual/packages/channels.xml b/third_party/nix/doc/manual/packages/channels.xml
deleted file mode 100644
index 15c119fcb1f9..000000000000
--- a/third_party/nix/doc/manual/packages/channels.xml
+++ /dev/null
@@ -1,57 +0,0 @@
-<chapter xmlns="http://docbook.org/ns/docbook"
-      xmlns:xlink="http://www.w3.org/1999/xlink"
-      xmlns:xi="http://www.w3.org/2001/XInclude"
-      version="5.0"
-      xml:id="sec-channels">
-
-<title>Channels</title>
-
-<para>If you want to stay up to date with a set of packages, it’s not
-very convenient to manually download the latest set of Nix expressions
-for those packages and upgrade using <command>nix-env</command>.
-Fortunately, there’s a better way: <emphasis>Nix
-channels</emphasis>.</para>
-
-<para>A Nix channel is just a URL that points to a place that contains
-a set of Nix expressions and a manifest.  Using the command <link
-linkend="sec-nix-channel"><command>nix-channel</command></link> you
-can automatically stay up to date with whatever is available at that
-URL.</para>
-
-<para>You can “subscribe” to a channel using
-<command>nix-channel --add</command>, e.g.,
-
-<screen>
-$ nix-channel --add https://nixos.org/channels/nixpkgs-unstable</screen>
-
-subscribes you to a channel that always contains that latest version
-of the Nix Packages collection.  (Subscribing really just means that
-the URL is added to the file <filename>~/.nix-channels</filename>,
-where it is read by subsequent calls to <command>nix-channel
---update</command>.) You can “unsubscribe” using <command>nix-channel
---remove</command>:
-
-<screen>
-$ nix-channel --remove nixpkgs
-</screen>
-</para>
-
-<para>To obtain the latest Nix expressions available in a channel, do
-
-<screen>
-$ nix-channel --update</screen>
-
-This downloads and unpacks the Nix expressions in every channel
-(downloaded from <literal><replaceable>url</replaceable>/nixexprs.tar.bz2</literal>).
-It also makes the union of each channel’s Nix expressions available by
-default to <command>nix-env</command> operations (via the symlink
-<filename>~/.nix-defexpr/channels</filename>).  Consequently, you can
-then say
-
-<screen>
-$ nix-env -u</screen>
-
-to upgrade all packages in your profile to the latest versions
-available in the subscribed channels.</para>
-
-</chapter>
diff --git a/third_party/nix/doc/manual/packages/copy-closure.xml b/third_party/nix/doc/manual/packages/copy-closure.xml
deleted file mode 100644
index 012030e3eb67..000000000000
--- a/third_party/nix/doc/manual/packages/copy-closure.xml
+++ /dev/null
@@ -1,50 +0,0 @@
-<section xmlns="http://docbook.org/ns/docbook"
-         xmlns:xlink="http://www.w3.org/1999/xlink"
-         xmlns:xi="http://www.w3.org/2001/XInclude"
-         version="5.0"
-         xml:id="ssec-copy-closure">
-
-<title>Copying Closures Via SSH</title>
-
-<para>The command <command
-linkend="sec-nix-copy-closure">nix-copy-closure</command> copies a Nix
-store path along with all its dependencies to or from another machine
-via the SSH protocol.  It doesn’t copy store paths that are already
-present on the target machine.  For example, the following command
-copies Firefox with all its dependencies:
-
-<screen>
-$ nix-copy-closure --to alice@itchy.example.org $(type -p firefox)</screen>
-
-See <xref linkend='sec-nix-copy-closure' /> for details.</para>
-
-<para>With <command linkend='refsec-nix-store-export'>nix-store
---export</command> and <command
-linkend='refsec-nix-store-import'>nix-store --import</command> you can
-write the closure of a store path (that is, the path and all its
-dependencies) to a file, and then unpack that file into another Nix
-store.  For example,
-
-<screen>
-$ nix-store --export $(nix-store -qR $(type -p firefox)) > firefox.closure</screen>
-
-writes the closure of Firefox to a file.  You can then copy this file
-to another machine and install the closure:
-
-<screen>
-$ nix-store --import &lt; firefox.closure</screen>
-
-Any store paths in the closure that are already present in the target
-store are ignored.  It is also possible to pipe the export into
-another command, e.g. to copy and install a closure directly to/on
-another machine:
-
-<screen>
-$ nix-store --export $(nix-store -qR $(type -p firefox)) | bzip2 | \
-    ssh alice@itchy.example.org "bunzip2 | nix-store --import"</screen>
-
-However, <command>nix-copy-closure</command> is generally more
-efficient because it only copies paths that are not already present in
-the target Nix store.</para>
-
-</section>
diff --git a/third_party/nix/doc/manual/packages/garbage-collection.xml b/third_party/nix/doc/manual/packages/garbage-collection.xml
deleted file mode 100644
index b506f22b0302..000000000000
--- a/third_party/nix/doc/manual/packages/garbage-collection.xml
+++ /dev/null
@@ -1,86 +0,0 @@
-<chapter xmlns="http://docbook.org/ns/docbook"
-      xmlns:xlink="http://www.w3.org/1999/xlink"
-      xmlns:xi="http://www.w3.org/2001/XInclude"
-      version="5.0"
-      xml:id='sec-garbage-collection'>
-
-<title>Garbage Collection</title>
-
-<para><command>nix-env</command> operations such as upgrades
-(<option>-u</option>) and uninstall (<option>-e</option>) never
-actually delete packages from the system.  All they do (as shown
-above) is to create a new user environment that no longer contains
-symlinks to the “deleted” packages.</para>
-
-<para>Of course, since disk space is not infinite, unused packages
-should be removed at some point.  You can do this by running the Nix
-garbage collector.  It will remove from the Nix store any package
-not used (directly or indirectly) by any generation of any
-profile.</para>
-
-<para>Note however that as long as old generations reference a
-package, it will not be deleted.  After all, we wouldn’t be able to
-do a rollback otherwise.  So in order for garbage collection to be
-effective, you should also delete (some) old generations.  Of course,
-this should only be done if you are certain that you will not need to
-roll back.</para>
-
-<para>To delete all old (non-current) generations of your current
-profile:
-
-<screen>
-$ nix-env --delete-generations old</screen>
-
-Instead of <literal>old</literal> you can also specify a list of
-generations, e.g.,
-
-<screen>
-$ nix-env --delete-generations 10 11 14</screen>
-
-To delete all generations older than a specified number of days
-(except the current generation), use the <literal>d</literal>
-suffix. For example,
-
-<screen>
-$ nix-env --delete-generations 14d</screen>
-
-deletes all generations older than two weeks.</para>
-
-<para>After removing appropriate old generations you can run the
-garbage collector as follows:
-
-<screen>
-$ nix-store --gc</screen>
-
-The behaviour of the gargage collector is affected by the 
-<literal>keep-derivations</literal> (default: true) and <literal>keep-outputs</literal>
-(default: false) options in the Nix configuration file. The defaults will ensure
-that all derivations that are build-time dependencies of garbage collector roots
-will be kept and that all output paths that are runtime dependencies
-will be kept as well. All other derivations or paths will be collected. 
-(This is usually what you want, but while you are developing
-it may make sense to keep outputs to ensure that rebuild times are quick.)
-
-If you are feeling uncertain, you can also first view what files would
-be deleted:
-
-<screen>
-$ nix-store --gc --print-dead</screen>
-
-Likewise, the option <option>--print-live</option> will show the paths
-that <emphasis>won’t</emphasis> be deleted.</para>
-
-<para>There is also a convenient little utility
-<command>nix-collect-garbage</command>, which when invoked with the
-<option>-d</option> (<option>--delete-old</option>) switch deletes all
-old generations of all profiles in
-<filename>/nix/var/nix/profiles</filename>.  So
-
-<screen>
-$ nix-collect-garbage -d</screen>
-
-is a quick and easy way to clean up your system.</para>
-
-<xi:include href="garbage-collector-roots.xml" />
-
-</chapter>
diff --git a/third_party/nix/doc/manual/packages/garbage-collector-roots.xml b/third_party/nix/doc/manual/packages/garbage-collector-roots.xml
deleted file mode 100644
index 8338e539202f..000000000000
--- a/third_party/nix/doc/manual/packages/garbage-collector-roots.xml
+++ /dev/null
@@ -1,29 +0,0 @@
-<section xmlns="http://docbook.org/ns/docbook"
-      xmlns:xlink="http://www.w3.org/1999/xlink"
-      xmlns:xi="http://www.w3.org/2001/XInclude"
-      version="5.0"
-      xml:id="ssec-gc-roots">
-
-<title>Garbage Collector Roots</title>
-
-<para>The roots of the garbage collector are all store paths to which
-there are symlinks in the directory
-<filename><replaceable>prefix</replaceable>/nix/var/nix/gcroots</filename>.
-For instance, the following command makes the path
-<filename>/nix/store/d718ef...-foo</filename> a root of the collector:
-
-<screen>
-$ ln -s /nix/store/d718ef...-foo /nix/var/nix/gcroots/bar</screen>
-	
-That is, after this command, the garbage collector will not remove
-<filename>/nix/store/d718ef...-foo</filename> or any of its
-dependencies.</para>
-
-<para>Subdirectories of
-<filename><replaceable>prefix</replaceable>/nix/var/nix/gcroots</filename>
-are also searched for symlinks.  Symlinks to non-store paths are
-followed and searched for roots, but symlinks to non-store paths
-<emphasis>inside</emphasis> the paths reached in that way are not
-followed to prevent infinite recursion.</para>
-
-</section>
\ No newline at end of file
diff --git a/third_party/nix/doc/manual/packages/package-management.xml b/third_party/nix/doc/manual/packages/package-management.xml
deleted file mode 100644
index 61e55faeb311..000000000000
--- a/third_party/nix/doc/manual/packages/package-management.xml
+++ /dev/null
@@ -1,23 +0,0 @@
-<part xmlns="http://docbook.org/ns/docbook"
-      xmlns:xlink="http://www.w3.org/1999/xlink"
-      xmlns:xi="http://www.w3.org/2001/XInclude"
-      version="5.0"
-      xml:id='chap-package-management'>
-
-<title>Package Management</title>
-
-<partintro>
-<para>This chapter discusses how to do package management with Nix,
-i.e., how to obtain, install, upgrade, and erase packages.  This is
-the “user’s” perspective of the Nix system — people
-who want to <emphasis>create</emphasis> packages should consult
-<xref linkend='chap-writing-nix-expressions' />.</para>
-</partintro>
-
-<xi:include href="basic-package-mgmt.xml" />
-<xi:include href="profiles.xml" />
-<xi:include href="garbage-collection.xml" />
-<xi:include href="channels.xml" />
-<xi:include href="sharing-packages.xml" />
-
-</part>
diff --git a/third_party/nix/doc/manual/packages/profiles.xml b/third_party/nix/doc/manual/packages/profiles.xml
deleted file mode 100644
index 4d10319abe1c..000000000000
--- a/third_party/nix/doc/manual/packages/profiles.xml
+++ /dev/null
@@ -1,158 +0,0 @@
-<chapter xmlns="http://docbook.org/ns/docbook"
-      xmlns:xlink="http://www.w3.org/1999/xlink"
-      xmlns:xi="http://www.w3.org/2001/XInclude"
-      version="5.0"
-      xml:id="sec-profiles">
-
-<title>Profiles</title>
-
-<para>Profiles and user environments are Nix’s mechanism for
-implementing the ability to allow different users to have different
-configurations, and to do atomic upgrades and rollbacks.  To
-understand how they work, it’s useful to know a bit about how Nix
-works.  In Nix, packages are stored in unique locations in the
-<emphasis>Nix store</emphasis> (typically,
-<filename>/nix/store</filename>).  For instance, a particular version
-of the Subversion package might be stored in a directory
-<filename>/nix/store/dpmvp969yhdqs7lm2r1a3gng7pyq6vy4-subversion-1.1.3/</filename>,
-while another version might be stored in
-<filename>/nix/store/5mq2jcn36ldlmh93yj1n8s9c95pj7c5s-subversion-1.1.2</filename>.
-The long strings prefixed to the directory names are cryptographic
-hashes<footnote><para>160-bit truncations of SHA-256 hashes encoded in
-a base-32 notation, to be precise.</para></footnote> of
-<emphasis>all</emphasis> inputs involved in building the package —
-sources, dependencies, compiler flags, and so on.  So if two
-packages differ in any way, they end up in different locations in
-the file system, so they don’t interfere with each other.  <xref
-linkend='fig-user-environments' /> shows a part of a typical Nix
-store.</para>
-
-<figure xml:id='fig-user-environments'><title>User environments</title>
-  <mediaobject>
-    <imageobject>
-      <imagedata fileref='../figures/user-environments.png' format='PNG' />
-    </imageobject>
-  </mediaobject>
-</figure>
-
-<para>Of course, you wouldn’t want to type
-
-<screen>
-$ /nix/store/dpmvp969yhdq...-subversion-1.1.3/bin/svn</screen>
-
-every time you want to run Subversion.  Of course we could set up the
-<envar>PATH</envar> environment variable to include the
-<filename>bin</filename> directory of every package we want to use,
-but this is not very convenient since changing <envar>PATH</envar>
-doesn’t take effect for already existing processes.  The solution Nix
-uses is to create directory trees of symlinks to
-<emphasis>activated</emphasis> packages.  These are called
-<emphasis>user environments</emphasis> and they are packages
-themselves (though automatically generated by
-<command>nix-env</command>), so they too reside in the Nix store.  For
-instance, in <xref linkend='fig-user-environments' /> the user
-environment <filename>/nix/store/0c1p5z4kda11...-user-env</filename>
-contains a symlink to just Subversion 1.1.2 (arrows in the figure
-indicate symlinks).  This would be what we would obtain if we had done
-
-<screen>
-$ nix-env -i subversion</screen>
-
-on a set of Nix expressions that contained Subversion 1.1.2.</para>
-
-<para>This doesn’t in itself solve the problem, of course; you
-wouldn’t want to type
-<filename>/nix/store/0c1p5z4kda11...-user-env/bin/svn</filename>
-either.  That’s why there are symlinks outside of the store that point
-to the user environments in the store; for instance, the symlinks
-<filename>default-42-link</filename> and
-<filename>default-43-link</filename> in the example.  These are called
-<emphasis>generations</emphasis> since every time you perform a
-<command>nix-env</command> operation, a new user environment is
-generated based on the current one.  For instance, generation 43 was
-created from generation 42 when we did
-
-<screen>
-$ nix-env -i subversion firefox</screen>
-
-on a set of Nix expressions that contained Firefox and a new version
-of Subversion.</para>
-
-<para>Generations are grouped together into
-<emphasis>profiles</emphasis> so that different users don’t interfere
-with each other if they don’t want to.  For example:
-
-<screen>
-$ ls -l /nix/var/nix/profiles/
-...
-lrwxrwxrwx  1 eelco ... default-42-link -> /nix/store/0c1p5z4kda11...-user-env
-lrwxrwxrwx  1 eelco ... default-43-link -> /nix/store/3aw2pdyx2jfc...-user-env
-lrwxrwxrwx  1 eelco ... default -> default-43-link</screen>
-
-This shows a profile called <filename>default</filename>.  The file
-<filename>default</filename> itself is actually a symlink that points
-to the current generation.  When we do a <command>nix-env</command>
-operation, a new user environment and generation link are created
-based on the current one, and finally the <filename>default</filename>
-symlink is made to point at the new generation.  This last step is
-atomic on Unix, which explains how we can do atomic upgrades.  (Note
-that the building/installing of new packages doesn’t interfere in
-any way with old packages, since they are stored in different
-locations in the Nix store.)</para>
-
-<para>If you find that you want to undo a <command>nix-env</command>
-operation, you can just do
-
-<screen>
-$ nix-env --rollback</screen>
-
-which will just make the current generation link point at the previous
-link.  E.g., <filename>default</filename> would be made to point at
-<filename>default-42-link</filename>.  You can also switch to a
-specific generation:
-
-<screen>
-$ nix-env --switch-generation 43</screen>
-
-which in this example would roll forward to generation 43 again.  You
-can also see all available generations:
-
-<screen>
-$ nix-env --list-generations</screen></para>
-
-<para>You generally wouldn’t have
-<filename>/nix/var/nix/profiles/<replaceable>some-profile</replaceable>/bin</filename>
-in your <envar>PATH</envar>.  Rather, there is a symlink
-<filename>~/.nix-profile</filename> that points to your current
-profile.  This means that you should put
-<filename>~/.nix-profile/bin</filename> in your <envar>PATH</envar>
-(and indeed, that’s what the initialisation script
-<filename>/nix/etc/profile.d/nix.sh</filename> does).  This makes it
-easier to switch to a different profile.  You can do that using the
-command <command>nix-env --switch-profile</command>:
-
-<screen>
-$ nix-env --switch-profile /nix/var/nix/profiles/my-profile
-
-$ nix-env --switch-profile /nix/var/nix/profiles/default</screen>
-
-These commands switch to the <filename>my-profile</filename> and
-default profile, respectively.  If the profile doesn’t exist, it will
-be created automatically.  You should be careful about storing a
-profile in another location than the <filename>profiles</filename>
-directory, since otherwise it might not be used as a root of the
-garbage collector (see <xref linkend='sec-garbage-collection'
-/>).</para>
-
-<para>All <command>nix-env</command> operations work on the profile
-pointed to by <command>~/.nix-profile</command>, but you can override
-this using the <option>--profile</option> option (abbreviation
-<option>-p</option>):
-
-<screen>
-$ nix-env -p /nix/var/nix/profiles/other-profile -i subversion</screen>
-
-This will <emphasis>not</emphasis> change the
-<command>~/.nix-profile</command> symlink.</para>
-
-</chapter>
diff --git a/third_party/nix/doc/manual/packages/s3-substituter.xml b/third_party/nix/doc/manual/packages/s3-substituter.xml
deleted file mode 100644
index 868b5a66dc3c..000000000000
--- a/third_party/nix/doc/manual/packages/s3-substituter.xml
+++ /dev/null
@@ -1,182 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<section xmlns="http://docbook.org/ns/docbook"
-         xmlns:xlink="http://www.w3.org/1999/xlink"
-         xmlns:xi="http://www.w3.org/2001/XInclude"
-         version="5.0"
-         xml:id="ssec-s3-substituter">
-
-<title>Serving a Nix store via AWS S3 or S3-compatible Service</title>
-
-<para>Nix has built-in support for storing and fetching store paths
-from Amazon S3 and S3 compatible services. This uses the same
-<emphasis>binary</emphasis> cache mechanism that Nix usually uses to
-fetch prebuilt binaries from <uri>cache.nixos.org</uri>.</para>
-
-<para>The following options can be specified as URL parameters to
-the S3 URL:</para>
-
-<variablelist>
-  <varlistentry><term><literal>profile</literal></term>
-  <listitem>
-    <para>
-      The name of the AWS configuration profile to use. By default
-      Nix will use the <literal>default</literal> profile.
-    </para>
-  </listitem>
-  </varlistentry>
-
-  <varlistentry><term><literal>region</literal></term>
-  <listitem>
-    <para>
-      The region of the S3 bucket. <literal>us–east-1</literal> by
-      default.
-    </para>
-
-    <para>
-      If your bucket is not in <literal>us–east-1</literal>, you
-      should always explicitly specify the region parameter.
-    </para>
-  </listitem>
-  </varlistentry>
-
-  <varlistentry><term><literal>endpoint</literal></term>
-  <listitem>
-    <para>
-      The URL to your S3-compatible service, for when not using
-      Amazon S3. Do not specify this value if you're using Amazon
-      S3.
-    </para>
-    <note><para>This endpoint must support HTTPS and will use
-    path-based addressing instead of virtual host based
-    addressing.</para></note>
-  </listitem>
-  </varlistentry>
-
-  <varlistentry><term><literal>scheme</literal></term>
-  <listitem>
-    <para>
-      The scheme used for S3 requests, <literal>https</literal>
-      (default) or <literal>http</literal>.  This option allows you to
-      disable HTTPS for binary caches which don't support it.
-    </para>
-    <note><para>HTTPS should be used if the cache might contain
-    sensitive information.</para></note>
-  </listitem>
-  </varlistentry>
-</variablelist>
-
-<para>In this example we will use the bucket named
-<literal>example-nix-cache</literal>.</para>
-
-<section xml:id="ssec-s3-substituter-anonymous-reads">
-  <title>Anonymous Reads to your S3-compatible binary cache</title>
-
-  <para>If your binary cache is publicly accessible and does not
-  require authentication, the simplest and easiest way to use Nix with
-  your S3 compatible binary cache is to use the HTTP URL for that
-  cache.</para>
-
-  <para>For AWS S3 the binary cache URL for example bucket will be
-  exactly <uri>https://example-nix-cache.s3.amazonaws.com</uri> or
-  <uri>s3://example-nix-cache</uri>. For S3 compatible binary caches,
-  consult that cache's documentation.</para>
-
-  <para>Your bucket will need the following bucket policy:</para>
-
-  <programlisting><![CDATA[
-{
-    "Id": "DirectReads",
-    "Version": "2012-10-17",
-    "Statement": [
-        {
-            "Sid": "AllowDirectReads",
-            "Action": [
-                "s3:GetObject",
-                "s3:GetBucketLocation"
-            ],
-            "Effect": "Allow",
-            "Resource": [
-                "arn:aws:s3:::example-nix-cache",
-                "arn:aws:s3:::example-nix-cache/*"
-            ],
-            "Principal": "*"
-        }
-    ]
-}
-]]></programlisting>
-</section>
-
-<section xml:id="ssec-s3-substituter-authenticated-reads">
-  <title>Authenticated Reads to your S3 binary cache</title>
-
-  <para>For AWS S3 the binary cache URL for example bucket will be
-  exactly <uri>s3://example-nix-cache</uri>.</para>
-
-  <para>Nix will use the <link
-  xlink:href="https://docs.aws.amazon.com/sdk-for-cpp/v1/developer-guide/credentials.html">default
-  credential provider chain</link> for authenticating requests to
-  Amazon S3.</para>
-
-  <para>Nix supports authenticated reads from Amazon S3 and S3
-  compatible binary caches.</para>
-
-  <para>Your bucket will need a bucket policy allowing the desired
-  users to perform the <literal>s3:GetObject</literal> and
-  <literal>s3:GetBucketLocation</literal> action on all objects in the
-  bucket. The anonymous policy in <xref
-  linkend="ssec-s3-substituter-anonymous-reads" /> can be updated to
-  have a restricted <literal>Principal</literal> to support
-  this.</para>
-</section>
-
-
-<section xml:id="ssec-s3-substituter-authenticated-writes">
-  <title>Authenticated Writes to your S3-compatible binary cache</title>
-
-  <para>Nix support fully supports writing to Amazon S3 and S3
-  compatible buckets. The binary cache URL for our example bucket will
-  be <uri>s3://example-nix-cache</uri>.</para>
-
-  <para>Nix will use the <link
-  xlink:href="https://docs.aws.amazon.com/sdk-for-cpp/v1/developer-guide/credentials.html">default
-  credential provider chain</link> for authenticating requests to
-  Amazon S3.</para>
-
-  <para>Your account will need the following IAM policy to
-  upload to the cache:</para>
-
-  <programlisting><![CDATA[
-{
-  "Version": "2012-10-17",
-  "Statement": [
-    {
-      "Sid": "UploadToCache",
-      "Effect": "Allow",
-      "Action": [
-        "s3:AbortMultipartUpload",
-        "s3:GetBucketLocation",
-        "s3:GetObject",
-        "s3:ListBucket",
-        "s3:ListBucketMultipartUploads",
-        "s3:ListMultipartUploadParts",
-        "s3:PutObject"
-      ],
-      "Resource": [
-        "arn:aws:s3:::example-nix-cache",
-        "arn:aws:s3:::example-nix-cache/*"
-      ]
-    }
-  ]
-}
-]]></programlisting>
-
-
-  <example><title>Uploading with a specific credential profile for Amazon S3</title>
-    <para><command>nix copy --to 's3://example-nix-cache?profile=cache-upload&amp;region=eu-west-2' nixpkgs.hello</command></para>
-  </example>
-
-  <example><title>Uploading to an S3-Compatible Binary Cache</title>
-    <para><command>nix copy --to 's3://example-nix-cache?profile=cache-upload&amp;scheme=https&amp;endpoint=minio.example.com' nixpkgs.hello</command></para>
-  </example>
-</section>
-</section>
diff --git a/third_party/nix/doc/manual/packages/sharing-packages.xml b/third_party/nix/doc/manual/packages/sharing-packages.xml
deleted file mode 100644
index bb6c52b8f8c1..000000000000
--- a/third_party/nix/doc/manual/packages/sharing-packages.xml
+++ /dev/null
@@ -1,20 +0,0 @@
-<chapter xmlns="http://docbook.org/ns/docbook"
-      xmlns:xlink="http://www.w3.org/1999/xlink"
-      xmlns:xi="http://www.w3.org/2001/XInclude"
-      version="5.0"
-      xml:id="sec-sharing-packages">
-
-<title>Sharing Packages Between Machines</title>
-
-<para>Sometimes you want to copy a package from one machine to
-another.  Or, you want to install some packages and you know that
-another machine already has some or all of those packages or their
-dependencies.  In that case there are mechanisms to quickly copy
-packages between machines.</para>
-
-<xi:include href="binary-cache-substituter.xml" />
-<xi:include href="copy-closure.xml" />
-<xi:include href="ssh-substituter.xml" />
-<xi:include href="s3-substituter.xml" />
-
-</chapter>
diff --git a/third_party/nix/doc/manual/packages/ssh-substituter.xml b/third_party/nix/doc/manual/packages/ssh-substituter.xml
deleted file mode 100644
index 8db3f96625d3..000000000000
--- a/third_party/nix/doc/manual/packages/ssh-substituter.xml
+++ /dev/null
@@ -1,73 +0,0 @@
-<section xmlns="http://docbook.org/ns/docbook"
-         xmlns:xlink="http://www.w3.org/1999/xlink"
-         xmlns:xi="http://www.w3.org/2001/XInclude"
-         version="5.0"
-         xml:id="ssec-ssh-substituter">
-
-<title>Serving a Nix store via SSH</title>
-
-<para>You can tell Nix to automatically fetch needed binaries from a
-remote Nix store via SSH. For example, the following installs Firefox,
-automatically fetching any store paths in Firefox’s closure if they
-are available on the server <literal>avalon</literal>:
-
-<screen>
-$ nix-env -i firefox --substituters ssh://alice@avalon
-</screen>
-
-This works similar to the binary cache substituter that Nix usually
-uses, only using SSH instead of HTTP: if a store path
-<literal>P</literal> is needed, Nix will first check if it’s available
-in the Nix store on <literal>avalon</literal>. If not, it will fall
-back to using the binary cache substituter, and then to building from
-source.</para>
-
-<note><para>The SSH substituter currently does not allow you to enter
-an SSH passphrase interactively. Therefore, you should use
-<command>ssh-add</command> to load the decrypted private key into
-<command>ssh-agent</command>.</para></note>
-
-<para>You can also copy the closure of some store path, without
-installing it into your profile, e.g.
-
-<screen>
-$ nix-store -r /nix/store/m85bxg…-firefox-34.0.5 --substituters ssh://alice@avalon
-</screen>
-
-This is essentially equivalent to doing
-
-<screen>
-$ nix-copy-closure --from alice@avalon /nix/store/m85bxg…-firefox-34.0.5
-</screen>
-
-</para>
-
-<para>You can use SSH’s <emphasis>forced command</emphasis> feature to
-set up a restricted user account for SSH substituter access, allowing
-read-only access to the local Nix store, but nothing more. For
-example, add the following lines to <filename>sshd_config</filename>
-to restrict the user <literal>nix-ssh</literal>:
-
-<programlisting>
-Match User nix-ssh
-  AllowAgentForwarding no
-  AllowTcpForwarding no
-  PermitTTY no
-  PermitTunnel no
-  X11Forwarding no
-  ForceCommand nix-store --serve
-Match All
-</programlisting>
-
-On NixOS, you can accomplish the same by adding the following to your
-<filename>configuration.nix</filename>:
-
-<programlisting>
-nix.sshServe.enable = true;
-nix.sshServe.keys = [ "ssh-dss AAAAB3NzaC1k... bob@example.org" ];
-</programlisting>
-
-where the latter line lists the public keys of users that are allowed
-to connect.</para>
-
-</section>