chore(3p/nix): unvendor tvix 0.1 r/4098

Nothing is using this now, and we'll likely never pick this up again,
but we learned a lot in the process.

Every now and then this breaks in some bizarre way on channel bumps
and it's just a waste of time to maintain that.

Change-Id: Idcf2f5acd4ca7070ce18d7149cbfc0d967dc0a44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5632
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Autosubmit: tazjin <tazjin@tvl.su>

1 files changed, 0 insertions, 182 deletions

diff --git a/third_party/nix/doc/manual/packages/s3-substituter.xml b/third_party/nix/doc/manual/packages/s3-substituter.xml
deleted file mode 100644
index 868b5a66dc3c..000000000000
--- a/third_party/nix/doc/manual/packages/s3-substituter.xml
+++ /dev/null
@@ -1,182 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<section xmlns="http://docbook.org/ns/docbook"
-         xmlns:xlink="http://www.w3.org/1999/xlink"
-         xmlns:xi="http://www.w3.org/2001/XInclude"
-         version="5.0"
-         xml:id="ssec-s3-substituter">
-
-<title>Serving a Nix store via AWS S3 or S3-compatible Service</title>
-
-<para>Nix has built-in support for storing and fetching store paths
-from Amazon S3 and S3 compatible services. This uses the same
-<emphasis>binary</emphasis> cache mechanism that Nix usually uses to
-fetch prebuilt binaries from <uri>cache.nixos.org</uri>.</para>
-
-<para>The following options can be specified as URL parameters to
-the S3 URL:</para>
-
-<variablelist>
-  <varlistentry><term><literal>profile</literal></term>
-  <listitem>
-    <para>
-      The name of the AWS configuration profile to use. By default
-      Nix will use the <literal>default</literal> profile.
-    </para>
-  </listitem>
-  </varlistentry>
-
-  <varlistentry><term><literal>region</literal></term>
-  <listitem>
-    <para>
-      The region of the S3 bucket. <literal>us–east-1</literal> by
-      default.
-    </para>
-
-    <para>
-      If your bucket is not in <literal>us–east-1</literal>, you
-      should always explicitly specify the region parameter.
-    </para>
-  </listitem>
-  </varlistentry>
-
-  <varlistentry><term><literal>endpoint</literal></term>
-  <listitem>
-    <para>
-      The URL to your S3-compatible service, for when not using
-      Amazon S3. Do not specify this value if you're using Amazon
-      S3.
-    </para>
-    <note><para>This endpoint must support HTTPS and will use
-    path-based addressing instead of virtual host based
-    addressing.</para></note>
-  </listitem>
-  </varlistentry>
-
-  <varlistentry><term><literal>scheme</literal></term>
-  <listitem>
-    <para>
-      The scheme used for S3 requests, <literal>https</literal>
-      (default) or <literal>http</literal>.  This option allows you to
-      disable HTTPS for binary caches which don't support it.
-    </para>
-    <note><para>HTTPS should be used if the cache might contain
-    sensitive information.</para></note>
-  </listitem>
-  </varlistentry>
-</variablelist>
-
-<para>In this example we will use the bucket named
-<literal>example-nix-cache</literal>.</para>
-
-<section xml:id="ssec-s3-substituter-anonymous-reads">
-  <title>Anonymous Reads to your S3-compatible binary cache</title>
-
-  <para>If your binary cache is publicly accessible and does not
-  require authentication, the simplest and easiest way to use Nix with
-  your S3 compatible binary cache is to use the HTTP URL for that
-  cache.</para>
-
-  <para>For AWS S3 the binary cache URL for example bucket will be
-  exactly <uri>https://example-nix-cache.s3.amazonaws.com</uri> or
-  <uri>s3://example-nix-cache</uri>. For S3 compatible binary caches,
-  consult that cache's documentation.</para>
-
-  <para>Your bucket will need the following bucket policy:</para>
-
-  <programlisting><![CDATA[
-{
-    "Id": "DirectReads",
-    "Version": "2012-10-17",
-    "Statement": [
-        {
-            "Sid": "AllowDirectReads",
-            "Action": [
-                "s3:GetObject",
-                "s3:GetBucketLocation"
-            ],
-            "Effect": "Allow",
-            "Resource": [
-                "arn:aws:s3:::example-nix-cache",
-                "arn:aws:s3:::example-nix-cache/*"
-            ],
-            "Principal": "*"
-        }
-    ]
-}
-]]></programlisting>
-</section>
-
-<section xml:id="ssec-s3-substituter-authenticated-reads">
-  <title>Authenticated Reads to your S3 binary cache</title>
-
-  <para>For AWS S3 the binary cache URL for example bucket will be
-  exactly <uri>s3://example-nix-cache</uri>.</para>
-
-  <para>Nix will use the <link
-  xlink:href="https://docs.aws.amazon.com/sdk-for-cpp/v1/developer-guide/credentials.html">default
-  credential provider chain</link> for authenticating requests to
-  Amazon S3.</para>
-
-  <para>Nix supports authenticated reads from Amazon S3 and S3
-  compatible binary caches.</para>
-
-  <para>Your bucket will need a bucket policy allowing the desired
-  users to perform the <literal>s3:GetObject</literal> and
-  <literal>s3:GetBucketLocation</literal> action on all objects in the
-  bucket. The anonymous policy in <xref
-  linkend="ssec-s3-substituter-anonymous-reads" /> can be updated to
-  have a restricted <literal>Principal</literal> to support
-  this.</para>
-</section>
-
-
-<section xml:id="ssec-s3-substituter-authenticated-writes">
-  <title>Authenticated Writes to your S3-compatible binary cache</title>
-
-  <para>Nix support fully supports writing to Amazon S3 and S3
-  compatible buckets. The binary cache URL for our example bucket will
-  be <uri>s3://example-nix-cache</uri>.</para>
-
-  <para>Nix will use the <link
-  xlink:href="https://docs.aws.amazon.com/sdk-for-cpp/v1/developer-guide/credentials.html">default
-  credential provider chain</link> for authenticating requests to
-  Amazon S3.</para>
-
-  <para>Your account will need the following IAM policy to
-  upload to the cache:</para>
-
-  <programlisting><![CDATA[
-{
-  "Version": "2012-10-17",
-  "Statement": [
-    {
-      "Sid": "UploadToCache",
-      "Effect": "Allow",
-      "Action": [
-        "s3:AbortMultipartUpload",
-        "s3:GetBucketLocation",
-        "s3:GetObject",
-        "s3:ListBucket",
-        "s3:ListBucketMultipartUploads",
-        "s3:ListMultipartUploadParts",
-        "s3:PutObject"
-      ],
-      "Resource": [
-        "arn:aws:s3:::example-nix-cache",
-        "arn:aws:s3:::example-nix-cache/*"
-      ]
-    }
-  ]
-}
-]]></programlisting>
-
-
-  <example><title>Uploading with a specific credential profile for Amazon S3</title>
-    <para><command>nix copy --to 's3://example-nix-cache?profile=cache-upload&amp;region=eu-west-2' nixpkgs.hello</command></para>
-  </example>
-
-  <example><title>Uploading to an S3-Compatible Binary Cache</title>
-    <para><command>nix copy --to 's3://example-nix-cache?profile=cache-upload&amp;scheme=https&amp;endpoint=minio.example.com' nixpkgs.hello</command></para>
-  </example>
-</section>
-</section>