Add 'third_party/nix/' from commit 'be66c7a6b24e3c3c6157fd37b86c7203d14acf10' r/724

git-subtree-dir: third_party/nix
git-subtree-mainline: cf8cd640c1adf74a3706efbcb0ea4625da106fb2
git-subtree-split: be66c7a6b24e3c3c6157fd37b86c7203d14acf10

1 files changed, 340 insertions, 0 deletions

diff --git a/third_party/nix/doc/manual/expressions/advanced-attributes.xml b/third_party/nix/doc/manual/expressions/advanced-attributes.xml
new file mode 100644
index 000000000000..07b0d97d3f7d
--- /dev/null
+++ b/third_party/nix/doc/manual/expressions/advanced-attributes.xml
@@ -0,0 +1,340 @@
+<section xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="sec-advanced-attributes">
+
+<title>Advanced Attributes</title>
+
+<para>Derivations can declare some infrequently used optional
+attributes.</para>
+
+<variablelist>
+
+  <varlistentry><term><varname>allowedReferences</varname></term>
+
+    <listitem><para>The optional attribute
+    <varname>allowedReferences</varname> specifies a list of legal
+    references (dependencies) of the output of the builder.  For
+    example,
+
+<programlisting>
+allowedReferences = [];
+</programlisting>
+
+    enforces that the output of a derivation cannot have any runtime
+    dependencies on its inputs.  To allow an output to have a runtime
+    dependency on itself, use <literal>"out"</literal> as a list item.
+    This is used in NixOS to check that generated files such as
+    initial ramdisks for booting Linux don’t have accidental
+    dependencies on other paths in the Nix store.</para></listitem>
+
+  </varlistentry>
+
+
+  <varlistentry><term><varname>allowedRequisites</varname></term>
+
+    <listitem><para>This attribute is similar to
+    <varname>allowedReferences</varname>, but it specifies the legal
+    requisites of the whole closure, so all the dependencies
+    recursively.  For example,
+
+<programlisting>
+allowedRequisites = [ foobar ];
+</programlisting>
+
+    enforces that the output of a derivation cannot have any other
+    runtime dependency than <varname>foobar</varname>, and in addition
+    it enforces that <varname>foobar</varname> itself doesn't
+    introduce any other dependency itself.</para></listitem>
+
+  </varlistentry>
+
+  <varlistentry><term><varname>disallowedReferences</varname></term>
+
+    <listitem><para>The optional attribute
+    <varname>disallowedReferences</varname> specifies a list of illegal
+    references (dependencies) of the output of the builder.  For
+    example,
+
+<programlisting>
+disallowedReferences = [ foo ];
+</programlisting>
+
+    enforces that the output of a derivation cannot have a direct runtime
+    dependencies on the derivation <varname>foo</varname>.</para></listitem>
+
+  </varlistentry>
+
+
+  <varlistentry><term><varname>disallowedRequisites</varname></term>
+
+    <listitem><para>This attribute is similar to
+    <varname>disallowedReferences</varname>, but it specifies illegal
+    requisites for the whole closure, so all the dependencies
+    recursively.  For example,
+
+<programlisting>
+disallowedRequisites = [ foobar ];
+</programlisting>
+
+    enforces that the output of a derivation cannot have any
+    runtime dependency on <varname>foobar</varname> or any other derivation
+    depending recursively on <varname>foobar</varname>.</para></listitem>
+
+  </varlistentry>
+
+
+  <varlistentry><term><varname>exportReferencesGraph</varname></term>
+
+    <listitem><para>This attribute allows builders access to the
+    references graph of their inputs.  The attribute is a list of
+    inputs in the Nix store whose references graph the builder needs
+    to know.  The value of this attribute should be a list of pairs
+    <literal>[ <replaceable>name1</replaceable>
+    <replaceable>path1</replaceable> <replaceable>name2</replaceable>
+    <replaceable>path2</replaceable> <replaceable>...</replaceable>
+    ]</literal>.  The references graph of each
+    <replaceable>pathN</replaceable> will be stored in a text file
+    <replaceable>nameN</replaceable> in the temporary build directory.
+    The text files have the format used by <command>nix-store
+    --register-validity</command> (with the deriver fields left
+    empty).  For example, when the following derivation is built:
+
+<programlisting>
+derivation {
+  ...
+  exportReferencesGraph = [ "libfoo-graph" libfoo ];
+};
+</programlisting>
+
+    the references graph of <literal>libfoo</literal> is placed in the
+    file <filename>libfoo-graph</filename> in the temporary build
+    directory.</para>
+
+    <para><varname>exportReferencesGraph</varname> is useful for
+    builders that want to do something with the closure of a store
+    path.  Examples include the builders in NixOS that generate the
+    initial ramdisk for booting Linux (a <command>cpio</command>
+    archive containing the closure of the boot script) and the
+    ISO-9660 image for the installation CD (which is populated with a
+    Nix store containing the closure of a bootable NixOS
+    configuration).</para></listitem>
+
+  </varlistentry>
+
+
+  <varlistentry><term><varname>impureEnvVars</varname></term>
+
+    <listitem><para>This attribute allows you to specify a list of
+    environment variables that should be passed from the environment
+    of the calling user to the builder.  Usually, the environment is
+    cleared completely when the builder is executed, but with this
+    attribute you can allow specific environment variables to be
+    passed unmodified.  For example, <function>fetchurl</function> in
+    Nixpkgs has the line
+
+<programlisting>
+impureEnvVars = [ "http_proxy" "https_proxy" <replaceable>...</replaceable> ];
+</programlisting>
+
+    to make it use the proxy server configuration specified by the
+    user in the environment variables <envar>http_proxy</envar> and
+    friends.</para>
+
+    <para>This attribute is only allowed in <link
+    linkend="fixed-output-drvs">fixed-output derivations</link>, where
+    impurities such as these are okay since (the hash of) the output
+    is known in advance.  It is ignored for all other
+    derivations.</para>
+
+    <warning><para><varname>impureEnvVars</varname> implementation takes
+    environment variables from the current builder process. When a daemon is
+    building its environmental variables are used. Without the daemon, the
+    environmental variables come from the environment of the
+    <command>nix-build</command>.</para></warning></listitem>
+
+  </varlistentry>
+
+
+  <varlistentry xml:id="fixed-output-drvs">
+    <term><varname>outputHash</varname></term>
+    <term><varname>outputHashAlgo</varname></term>
+    <term><varname>outputHashMode</varname></term>
+
+    <listitem><para>These attributes declare that the derivation is a
+    so-called <emphasis>fixed-output derivation</emphasis>, which
+    means that a cryptographic hash of the output is already known in
+    advance.  When the build of a fixed-output derivation finishes,
+    Nix computes the cryptographic hash of the output and compares it
+    to the hash declared with these attributes.  If there is a
+    mismatch, the build fails.</para>
+
+    <para>The rationale for fixed-output derivations is derivations
+    such as those produced by the <function>fetchurl</function>
+    function.  This function downloads a file from a given URL.  To
+    ensure that the downloaded file has not been modified, the caller
+    must also specify a cryptographic hash of the file.  For example,
+
+<programlisting>
+fetchurl {
+  url = http://ftp.gnu.org/pub/gnu/hello/hello-2.1.1.tar.gz;
+  sha256 = "1md7jsfd8pa45z73bz1kszpp01yw6x5ljkjk2hx7wl800any6465";
+}
+</programlisting>
+
+    It sometimes happens that the URL of the file changes, e.g.,
+    because servers are reorganised or no longer available.  We then
+    must update the call to <function>fetchurl</function>, e.g.,
+
+<programlisting>
+fetchurl {
+  url = ftp://ftp.nluug.nl/pub/gnu/hello/hello-2.1.1.tar.gz;
+  sha256 = "1md7jsfd8pa45z73bz1kszpp01yw6x5ljkjk2hx7wl800any6465";
+}
+</programlisting>
+
+    If a <function>fetchurl</function> derivation was treated like a
+    normal derivation, the output paths of the derivation and
+    <emphasis>all derivations depending on it</emphasis> would change.
+    For instance, if we were to change the URL of the Glibc source
+    distribution in Nixpkgs (a package on which almost all other
+    packages depend) massive rebuilds would be needed.  This is
+    unfortunate for a change which we know cannot have a real effect
+    as it propagates upwards through the dependency graph.</para>
+
+    <para>For fixed-output derivations, on the other hand, the name of
+    the output path only depends on the <varname>outputHash*</varname>
+    and <varname>name</varname> attributes, while all other attributes
+    are ignored for the purpose of computing the output path.  (The
+    <varname>name</varname> attribute is included because it is part
+    of the path.)</para>
+
+    <para>As an example, here is the (simplified) Nix expression for
+    <varname>fetchurl</varname>:
+
+<programlisting>
+{ stdenv, curl }: # The <command>curl</command> program is used for downloading.
+
+{ url, sha256 }:
+
+stdenv.mkDerivation {
+  name = baseNameOf (toString url);
+  builder = ./builder.sh;
+  buildInputs = [ curl ];
+
+  # This is a fixed-output derivation; the output must be a regular
+  # file with SHA256 hash <varname>sha256</varname>.
+  outputHashMode = "flat";
+  outputHashAlgo = "sha256";
+  outputHash = sha256;
+
+  inherit url;
+}
+</programlisting>
+
+    </para>
+
+    <para>The <varname>outputHashAlgo</varname> attribute specifies
+    the hash algorithm used to compute the hash.  It can currently be
+    <literal>"sha1"</literal>, <literal>"sha256"</literal> or
+    <literal>"sha512"</literal>.</para>
+
+    <para>The <varname>outputHashMode</varname> attribute determines
+    how the hash is computed.  It must be one of the following two
+    values:
+
+    <variablelist>
+
+      <varlistentry><term><literal>"flat"</literal></term>
+
+        <listitem><para>The output must be a non-executable regular
+        file.  If it isn’t, the build fails.  The hash is simply
+        computed over the contents of that file (so it’s equal to what
+        Unix commands like <command>sha256sum</command> or
+        <command>sha1sum</command> produce).</para>
+
+        <para>This is the default.</para></listitem>
+
+      </varlistentry>
+
+      <varlistentry><term><literal>"recursive"</literal></term>
+
+        <listitem><para>The hash is computed over the NAR archive dump
+        of the output (i.e., the result of <link
+        linkend="refsec-nix-store-dump"><command>nix-store
+        --dump</command></link>).  In this case, the output can be
+        anything, including a directory tree.</para></listitem>
+
+      </varlistentry>
+
+    </variablelist>
+
+    </para>
+
+    <para>The <varname>outputHash</varname> attribute, finally, must
+    be a string containing the hash in either hexadecimal or base-32
+    notation.  (See the <link
+    linkend="sec-nix-hash"><command>nix-hash</command> command</link>
+    for information about converting to and from base-32
+    notation.)</para></listitem>
+
+  </varlistentry>
+
+
+  <varlistentry><term><varname>passAsFile</varname></term>
+
+    <listitem><para>A list of names of attributes that should be
+    passed via files rather than environment variables.  For example,
+    if you have
+
+    <programlisting>
+passAsFile = ["big"];
+big = "a very long string";
+    </programlisting>
+
+    then when the builder runs, the environment variable
+    <envar>bigPath</envar> will contain the absolute path to a
+    temporary file containing <literal>a very long
+    string</literal>. That is, for any attribute
+    <replaceable>x</replaceable> listed in
+    <varname>passAsFile</varname>, Nix will pass an environment
+    variable <envar><replaceable>x</replaceable>Path</envar> holding
+    the path of the file containing the value of attribute
+    <replaceable>x</replaceable>. This is useful when you need to pass
+    large strings to a builder, since most operating systems impose a
+    limit on the size of the environment (typically, a few hundred
+    kilobyte).</para></listitem>
+
+  </varlistentry>
+
+
+  <varlistentry><term><varname>preferLocalBuild</varname></term>
+
+    <listitem><para>If this attribute is set to
+    <literal>true</literal> and <link
+    linkend="chap-distributed-builds">distributed building is
+    enabled</link>, then, if possible, the derivaton will be built
+    locally instead of forwarded to a remote machine.  This is
+    appropriate for trivial builders where the cost of doing a
+    download or remote build would exceed the cost of building
+    locally.</para></listitem>
+
+  </varlistentry>
+
+
+  <varlistentry><term><varname>allowSubstitutes</varname></term>
+
+    <listitem><para>If this attribute is set to
+    <literal>false</literal>, then Nix will always build this
+    derivation; it will not try to substitute its outputs. This is
+    useful for very trivial derivations (such as
+    <function>writeText</function> in Nixpkgs) that are cheaper to
+    build than to substitute from a binary cache.</para></listitem>
+
+  </varlistentry>
+
+
+</variablelist>
+
+</section>