about summary refs log tree commit diff
path: root/third_party/nix/doc/manual/command-ref/env-common.xml
diff options
context:
space:
mode:
authorVincent Ambo <mail@tazj.in>2022-05-18T15·39+0200
committerclbot <clbot@tvl.fyi>2022-05-19T14·08+0000
commitd127f9bd0e7b9b2e0df2de8a2227f77c0907468d (patch)
tree68455040d88b8e0c2817601db88ede450873ff8e /third_party/nix/doc/manual/command-ref/env-common.xml
parentc85291c602ac666421627d6934ebc6d5be1b93e1 (diff)
chore(3p/nix): unvendor tvix 0.1 r/4098
Nothing is using this now, and we'll likely never pick this up again,
but we learned a lot in the process.

Every now and then this breaks in some bizarre way on channel bumps
and it's just a waste of time to maintain that.

Change-Id: Idcf2f5acd4ca7070ce18d7149cbfc0d967dc0a44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5632
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Diffstat (limited to 'third_party/nix/doc/manual/command-ref/env-common.xml')
-rw-r--r--third_party/nix/doc/manual/command-ref/env-common.xml202
1 files changed, 0 insertions, 202 deletions
diff --git a/third_party/nix/doc/manual/command-ref/env-common.xml b/third_party/nix/doc/manual/command-ref/env-common.xml
deleted file mode 100644
index 696d68c34516..000000000000
--- a/third_party/nix/doc/manual/command-ref/env-common.xml
+++ /dev/null
@@ -1,202 +0,0 @@
-<chapter xmlns="http://docbook.org/ns/docbook"
-      xmlns:xlink="http://www.w3.org/1999/xlink"
-      xmlns:xi="http://www.w3.org/2001/XInclude"
-      version="5.0"
-      xml:id="sec-common-env">
-
-<title>Common Environment Variables</title>
-
-
-<para>Most Nix commands interpret the following environment variables:</para>
-
-<variablelist xml:id="env-common">
-
-<varlistentry><term><envar>IN_NIX_SHELL</envar></term>
-
-  <listitem><para>Indicator that tells if the current environment was set up by
-  <command>nix-shell</command>.  Since Nix 2.0 the values are
-  <literal>"pure"</literal> and <literal>"impure"</literal></para></listitem>
-
-</varlistentry>
-
-<varlistentry xml:id="env-NIX_PATH"><term><envar>NIX_PATH</envar></term>
-
-  <listitem>
-
-    <para>A colon-separated list of directories used to look up Nix
-    expressions enclosed in angle brackets (i.e.,
-    <literal>&lt;<replaceable>path</replaceable>></literal>).  For
-    instance, the value
-
-    <screen>
-/home/eelco/Dev:/etc/nixos</screen>
-
-    will cause Nix to look for paths relative to
-    <filename>/home/eelco/Dev</filename> and
-    <filename>/etc/nixos</filename>, in that order.  It is also
-    possible to match paths against a prefix.  For example, the value
-
-    <screen>
-nixpkgs=/home/eelco/Dev/nixpkgs-branch:/etc/nixos</screen>
-
-    will cause Nix to search for
-    <literal>&lt;nixpkgs/<replaceable>path</replaceable>></literal> in
-    <filename>/home/eelco/Dev/nixpkgs-branch/<replaceable>path</replaceable></filename>
-    and
-    <filename>/etc/nixos/nixpkgs/<replaceable>path</replaceable></filename>.</para>
-
-    <para>If a path in the Nix search path starts with
-    <literal>http://</literal> or <literal>https://</literal>, it is
-    interpreted as the URL of a tarball that will be downloaded and
-    unpacked to a temporary location. The tarball must consist of a
-    single top-level directory. For example, setting
-    <envar>NIX_PATH</envar> to
-
-    <screen>
-nixpkgs=https://github.com/NixOS/nixpkgs-channels/archive/nixos-15.09.tar.gz</screen>
-
-    tells Nix to download the latest revision in the Nixpkgs/NixOS
-    15.09 channel.</para>
-
-    <para>A following shorthand can be used to refer to the official channels:
-    
-    <screen>nixpkgs=channel:nixos-15.09</screen>
-    </para>
-
-    <para>The search path can be extended using the <option
-    linkend="opt-I">-I</option> option, which takes precedence over
-    <envar>NIX_PATH</envar>.</para></listitem>
-
-</varlistentry>
-
-
-<varlistentry><term><envar>NIX_IGNORE_SYMLINK_STORE</envar></term>
-
-  <listitem>
-
-  <para>Normally, the Nix store directory (typically
-  <filename>/nix/store</filename>) is not allowed to contain any
-  symlink components.  This is to prevent “impure” builds.  Builders
-  sometimes “canonicalise” paths by resolving all symlink components.
-  Thus, builds on different machines (with
-  <filename>/nix/store</filename> resolving to different locations)
-  could yield different results.  This is generally not a problem,
-  except when builds are deployed to machines where
-  <filename>/nix/store</filename> resolves differently.  If you are
-  sure that you’re not going to do that, you can set
-  <envar>NIX_IGNORE_SYMLINK_STORE</envar> to <envar>1</envar>.</para>
-
-  <para>Note that if you’re symlinking the Nix store so that you can
-  put it on another file system than the root file system, on Linux
-  you’re better off using <literal>bind</literal> mount points, e.g.,
-
-  <screen>
-$ mkdir /nix
-$ mount -o bind /mnt/otherdisk/nix /nix</screen>
-
-  Consult the <citerefentry><refentrytitle>mount</refentrytitle>
-  <manvolnum>8</manvolnum></citerefentry> manual page for details.</para>
-
-  </listitem>
-
-</varlistentry>
-
-
-<varlistentry><term><envar>NIX_STORE_DIR</envar></term>
-
-  <listitem><para>Overrides the location of the Nix store (default
-  <filename><replaceable>prefix</replaceable>/store</filename>).</para></listitem>
-
-</varlistentry>
-
-
-<varlistentry><term><envar>NIX_DATA_DIR</envar></term>
-
-  <listitem><para>Overrides the location of the Nix static data
-  directory (default
-  <filename><replaceable>prefix</replaceable>/share</filename>).</para></listitem>
-
-</varlistentry>
-
-
-<varlistentry><term><envar>NIX_LOG_DIR</envar></term>
-
-  <listitem><para>Overrides the location of the Nix log directory
-  (default <filename><replaceable>prefix</replaceable>/var/log/nix</filename>).</para></listitem>
-
-</varlistentry>
-
-
-<varlistentry><term><envar>NIX_STATE_DIR</envar></term>
-
-  <listitem><para>Overrides the location of the Nix state directory
-  (default <filename><replaceable>prefix</replaceable>/var/nix</filename>).</para></listitem>
-
-</varlistentry>
-
-
-<varlistentry><term><envar>NIX_CONF_DIR</envar></term>
-
-  <listitem><para>Overrides the location of the Nix configuration
-  directory (default
-  <filename><replaceable>prefix</replaceable>/etc/nix</filename>).</para></listitem>
-
-</varlistentry>
-
-
-<varlistentry><term><envar>TMPDIR</envar></term>
-
-  <listitem><para>Use the specified directory to store temporary
-  files.  In particular, this includes temporary build directories;
-  these can take up substantial amounts of disk space.  The default is
-  <filename>/tmp</filename>.</para></listitem>
-
-</varlistentry>
-
-
-<varlistentry xml:id="envar-remote"><term><envar>NIX_REMOTE</envar></term>
-
-  <listitem><para>This variable should be set to
-  <literal>daemon</literal> if you want to use the Nix daemon to
-  execute Nix operations. This is necessary in <link
-  linkend="ssec-multi-user">multi-user Nix installations</link>.
-  If the Nix daemon's Unix socket is at some non-standard path,
-  this variable should be set to <literal>unix://path/to/socket</literal>.
-  Otherwise, it should be left unset.</para></listitem>
-
-</varlistentry>
-
-
-<varlistentry><term><envar>NIX_SHOW_STATS</envar></term>
-
-  <listitem><para>If set to <literal>1</literal>, Nix will print some
-  evaluation statistics, such as the number of values
-  allocated.</para></listitem>
-
-</varlistentry>
-
-
-<varlistentry><term><envar>NIX_COUNT_CALLS</envar></term>
-
-  <listitem><para>If set to <literal>1</literal>, Nix will print how
-  often functions were called during Nix expression evaluation.  This
-  is useful for profiling your Nix expressions.</para></listitem>
-
-</varlistentry>
-
-
-<varlistentry><term><envar>GC_INITIAL_HEAP_SIZE</envar></term>
-
-  <listitem><para>If Nix has been configured to use the Boehm garbage
-  collector, this variable sets the initial size of the heap in bytes.
-  It defaults to 384 MiB.  Setting it to a low value reduces memory
-  consumption, but will increase runtime due to the overhead of
-  garbage collection.</para></listitem>
-
-</varlistentry>
-
-
-</variablelist>
-
-
-</chapter>