merge(third_party/git): Merge squashed git subtree at v2.23.0 r/373

Merge commit '1b593e1ea4d2af0f6444d9a7788d5d99abd6fde5' as 'third_party/git'

1 files changed, 285 insertions, 0 deletions

diff --git a/third_party/git/Documentation/howto/setup-git-server-over-http.txt b/third_party/git/Documentation/howto/setup-git-server-over-http.txt
new file mode 100644
index 000000000000..bfe6f9b50063
--- /dev/null
+++ b/third_party/git/Documentation/howto/setup-git-server-over-http.txt
@@ -0,0 +1,285 @@
+From: Rutger Nijlunsing <rutger@nospam.com>
+Subject: Setting up a Git repository which can be pushed into and pulled from over HTTP(S).
+Date: Thu, 10 Aug 2006 22:00:26 +0200
+Content-type: text/asciidoc
+
+How to setup Git server over http
+=================================
+
+NOTE: This document is from 2006.  A lot has happened since then, and this
+document is now relevant mainly if your web host is not CGI capable.
+Almost everyone else should instead look at linkgit:git-http-backend[1].
+
+Since Apache is one of those packages people like to compile
+themselves while others prefer the bureaucrat's dream Debian, it is
+impossible to give guidelines which will work for everyone. Just send
+some feedback to the mailing list at git@vger.kernel.org to get this
+document tailored to your favorite distro.
+
+
+What's needed:
+
+- Have an Apache web-server
+
+  On Debian:
+    $ apt-get install apache2
+    To get apache2 by default started,
+    edit /etc/default/apache2 and set NO_START=0
+
+- can edit the configuration of it.
+
+  This could be found under /etc/httpd, or refer to your Apache documentation.
+
+  On Debian: this means being able to edit files under /etc/apache2
+
+- can restart it.
+
+  'apachectl --graceful' might do. If it doesn't, just stop and
+  restart apache. Be warning that active connections to your server
+  might be aborted by this.
+
+  On Debian:
+    $ /etc/init.d/apache2 restart
+  or
+    $ /etc/init.d/apache2 force-reload
+    (which seems to do the same)
+  This adds symlinks from the /etc/apache2/mods-enabled to
+  /etc/apache2/mods-available.
+
+- have permissions to chown a directory
+
+- have Git installed on the client, and
+
+- either have Git installed on the server or have a webdav client on
+  the client.
+
+In effect, this means you're going to be root, or that you're using a
+preconfigured WebDAV server.
+
+
+Step 1: setup a bare Git repository
+-----------------------------------
+
+At the time of writing, git-http-push cannot remotely create a Git
+repository. So we have to do that at the server side with Git. Another
+option is to generate an empty bare repository at the client and copy
+it to the server with a WebDAV client (which is the only option if Git
+is not installed on the server).
+
+Create the directory under the DocumentRoot of the directories served
+by Apache. As an example we take /usr/local/apache2, but try "grep
+DocumentRoot /where/ever/httpd.conf" to find your root:
+
+    $ cd /usr/local/apache/htdocs
+    $ mkdir my-new-repo.git
+
+  On Debian:
+
+    $ cd /var/www
+    $ mkdir my-new-repo.git
+
+
+Initialize a bare repository
+
+    $ cd my-new-repo.git
+    $ git --bare init
+
+
+Change the ownership to your web-server's credentials. Use `"grep ^User
+httpd.conf"` and `"grep ^Group httpd.conf"` to find out:
+
+    $ chown -R www.www .
+
+  On Debian:
+
+    $ chown -R www-data.www-data .
+
+
+If you do not know which user Apache runs as, you can alternatively do
+a "chmod -R a+w .", inspect the files which are created later on, and
+set the permissions appropriately.
+
+Restart apache2, and check whether http://server/my-new-repo.git gives
+a directory listing. If not, check whether apache started up
+successfully.
+
+
+Step 2: enable DAV on this repository
+-------------------------------------
+
+First make sure the dav_module is loaded. For this, insert in httpd.conf:
+
+    LoadModule dav_module libexec/httpd/libdav.so
+    AddModule mod_dav.c
+
+Also make sure that this line exists which is the file used for
+locking DAV operations:
+
+  DAVLockDB "/usr/local/apache2/temp/DAV.lock"
+
+  On Debian these steps can be performed with:
+
+    Enable the dav and dav_fs modules of apache:
+    $ a2enmod dav_fs
+    (just to be sure. dav_fs might be unneeded, I don't know)
+    $ a2enmod dav
+    The DAV lock is located in /etc/apache2/mods-available/dav_fs.conf:
+      DAVLockDB /var/lock/apache2/DAVLock
+
+Of course, it can point somewhere else, but the string is actually just a
+prefix in some Apache configurations, and therefore the _directory_ has to
+be writable by the user Apache runs as.
+
+Then, add something like this to your httpd.conf
+
+  <Location /my-new-repo.git>
+     DAV on
+     AuthType Basic
+     AuthName "Git"
+     AuthUserFile /usr/local/apache2/conf/passwd.git
+     Require valid-user
+  </Location>
+
+  On Debian:
+    Create (or add to) /etc/apache2/conf.d/git.conf :
+
+    <Location /my-new-repo.git>
+       DAV on
+       AuthType Basic
+       AuthName "Git"
+       AuthUserFile /etc/apache2/passwd.git
+       Require valid-user
+    </Location>
+
+    Debian automatically reads all files under /etc/apache2/conf.d.
+
+The password file can be somewhere else, but it has to be readable by
+Apache and preferably not readable by the world.
+
+Create this file by
+    $ htpasswd -c /usr/local/apache2/conf/passwd.git <user>
+
+    On Debian:
+      $ htpasswd -c /etc/apache2/passwd.git <user>
+
+You will be asked a password, and the file is created. Subsequent calls
+to htpasswd should omit the '-c' option, since you want to append to the
+existing file.
+
+You need to restart Apache.
+
+Now go to http://<username>@<servername>/my-new-repo.git in your
+browser to check whether it asks for a password and accepts the right
+password.
+
+On Debian:
+
+   To test the WebDAV part, do:
+
+   $ apt-get install litmus
+   $ litmus http://<servername>/my-new-repo.git <username> <password>
+
+   Most tests should pass.
+
+A command-line tool to test WebDAV is cadaver. If you prefer GUIs, for
+example, konqueror can open WebDAV URLs as "webdav://..." or
+"webdavs://...".
+
+If you're into Windows, from XP onwards Internet Explorer supports
+WebDAV. For this, do Internet Explorer -> Open Location ->
+http://<servername>/my-new-repo.git [x] Open as webfolder -> login .
+
+
+Step 3: setup the client
+------------------------
+
+Make sure that you have HTTP support, i.e. your Git was built with
+libcurl (version more recent than 7.10). The command 'git http-push' with
+no argument should display a usage message.
+
+Then, add the following to your $HOME/.netrc (you can do without, but will be
+asked to input your password a _lot_ of times):
+
+    machine <servername>
+    login <username>
+    password <password>
+
+...and set permissions:
+     chmod 600 ~/.netrc
+
+If you want to access the web-server by its IP, you have to type that in,
+instead of the server name.
+
+To check whether all is OK, do:
+
+   curl --netrc --location -v http://<username>@<servername>/my-new-repo.git/HEAD
+
+...this should give something like 'ref: refs/heads/master', which is
+the content of the file HEAD on the server.
+
+Now, add the remote in your existing repository which contains the project
+you want to export:
+
+   $ git-config remote.upload.url \
+       http://<username>@<servername>/my-new-repo.git/
+
+It is important to put the last '/'; Without it, the server will send
+a redirect which git-http-push does not (yet) understand, and git-http-push
+will repeat the request infinitely.
+
+
+Step 4: make the initial push
+-----------------------------
+
+From your client repository, do
+
+   $ git push upload master
+
+This pushes branch 'master' (which is assumed to be the branch you
+want to export) to repository called 'upload', which we previously
+defined with git-config.
+
+
+Using a proxy:
+--------------
+
+If you have to access the WebDAV server from behind an HTTP(S) proxy,
+set the variable 'all_proxy' to `http://proxy-host.com:port`, or
+`http://login-on-proxy:passwd-on-proxy@proxy-host.com:port`. See 'man
+curl' for details.
+
+
+Troubleshooting:
+----------------
+
+If git-http-push says
+
+   Error: no DAV locking support on remote repo http://...
+
+then it means the web-server did not accept your authentication. Make sure
+that the user name and password matches in httpd.conf, .netrc and the URL
+you are uploading to.
+
+If git-http-push shows you an error (22/502) when trying to MOVE a blob,
+it means that your web-server somehow does not recognize its name in the
+request; This can happen when you start Apache, but then disable the
+network interface. A simple restart of Apache helps.
+
+Errors like (22/502) are of format (curl error code/http error
+code). So (22/404) means something like 'not found' at the server.
+
+Reading /usr/local/apache2/logs/error_log is often helpful.
+
+  On Debian: Read /var/log/apache2/error.log instead.
+
+If you access HTTPS locations, Git may fail verifying the SSL
+certificate (this is return code 60). Setting http.sslVerify=false can
+help diagnosing the problem, but removes security checks.
+
+
+Debian References: http://www.debian-administration.org/articles/285
+
+Authors
+  Johannes Schindelin <Johannes.Schindelin@gmx.de>
+  Rutger Nijlunsing <git@wingding.demon.nl>
+  Matthieu Moy <Matthieu.Moy@imag.fr>