Merge branch 'master' of github.com:thatdocslady/nix

Conflicts:
	doc/manual/release-notes.xml
	doc/manual/writing-nix-expressions.xml

11 files changed, 508 insertions, 0 deletions

diff --git a/doc/manual/installation/building-source.xml b/doc/manual/installation/building-source.xml
new file mode 100644
index 000000000000..2202ec73febe
--- /dev/null
+++ b/doc/manual/installation/building-source.xml
@@ -0,0 +1,57 @@
+<section xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="sec-building-source">
+
+<title>Building Nix from Source</title>
+
+<para>After unpacking or checking out the Nix sources, issue the
+following commands:
+
+<screen>
+$ ./configure <replaceable>options...</replaceable>
+$ make
+$ make install</screen>
+
+Nix requires GNU Make so you may need to invoke
+<command>gmake</command> instead.</para>
+
+<para>When building from the Git repository, these should be preceded
+by the command:
+
+<screen>
+$ ./bootstrap.sh</screen>
+
+</para>
+
+<para>The installation path can be specified by passing the
+<option>--prefix=<replaceable>prefix</replaceable></option> to
+<command>configure</command>.  The default installation directory is
+<filename>/usr/local</filename>.  You can change this to any location
+you like.  You must have write permission to the
+<replaceable>prefix</replaceable> path.</para>
+
+<para>Nix keeps its <emphasis>store</emphasis> (the place where
+packages are stored) in <filename>/nix/store</filename> by default.
+This can be changed using
+<option>--with-store-dir=<replaceable>path</replaceable></option>.</para>
+
+<warning><para>It is best <emphasis>not</emphasis> to change the Nix
+store from its default, since doing so makes it impossible to use
+pre-built binaries from the standard Nixpkgs channels — that is, all
+packages will need to be built from source.</para></warning>
+
+<para>Nix keeps state (such as its database and log files) in
+<filename>/nix/var</filename> by default.  This can be changed using
+<option>--localstatedir=<replaceable>path</replaceable></option>.</para>
+
+<para>If you want to rebuild the documentation, pass the full path to
+the DocBook RELAX NG schemas and to the DocBook XSL stylesheets using
+the
+<option>--with-docbook-rng=<replaceable>path</replaceable></option>
+and
+<option>--with-docbook-xsl=<replaceable>path</replaceable></option>
+options.</para>
+
+</section>
\ No newline at end of file
diff --git a/doc/manual/installation/env-variables.xml b/doc/manual/installation/env-variables.xml
new file mode 100644
index 000000000000..fc39cdd9dfef
--- /dev/null
+++ b/doc/manual/installation/env-variables.xml
@@ -0,0 +1,24 @@
+<chapter xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="ch-env-variables">
+
+<title>Environment Variables</title>
+
+<para>To use Nix, some environment variables should be set.  In
+particular, <envar>PATH</envar> should contain the directories
+<filename><replaceable>prefix</replaceable>/bin</filename> and
+<filename>~/.nix-profile/bin</filename>.  The first directory contains
+the Nix tools themselves, while <filename>~/.nix-profile</filename> is
+a symbolic link to the current <emphasis>user environment</emphasis>
+(an automatically generated package consisting of symlinks to
+installed packages).  The simplest way to set the required environment
+variables is to include the file
+<filename><replaceable>prefix</replaceable>/etc/profile.d/nix.sh</filename>
+in your <filename>~/.profile</filename> (or similar), like this:</para>
+
+<screen>
+source <replaceable>prefix</replaceable>/etc/profile.d/nix.sh</screen>
+
+</chapter>
\ No newline at end of file
diff --git a/doc/manual/installation/installation.xml b/doc/manual/installation/installation.xml
new file mode 100644
index 000000000000..87895935288d
--- /dev/null
+++ b/doc/manual/installation/installation.xml
@@ -0,0 +1,34 @@
+<part xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="chap-installation">
+
+<title>Installation</title>
+
+<partintro>
+<para>This section describes how to install and configure Nix for first-time use.</para>
+</partintro>
+
+<xi:include href="supported-platforms.xml" />
+<xi:include href="installing-binary.xml" />
+<xi:include href="installing-source.xml" />
+<xi:include href="nix-security.xml" />
+<xi:include href="env-variables.xml" />
+
+<!-- TODO: should be updated
+<section><title>Upgrading Nix through Nix</title>
+
+<para>You can install the latest stable version of Nix through Nix
+itself by subscribing to the channel <link
+xlink:href="http://nixos.org/releases/nix/channels/nix-stable" />,
+or the latest unstable version by subscribing to the channel <link
+xlink:href="http://nixos.org/releases/nix/channels/nix-unstable" />.
+You can also do a <link linkend="sec-one-click">one-click
+installation</link> by clicking on the package links at <link
+xlink:href="http://nixos.org/releases/full-index-nix.html" />.</para>
+
+</section>
+-->
+
+</part>
diff --git a/doc/manual/installation/installing-binary.xml b/doc/manual/installation/installing-binary.xml
new file mode 100644
index 000000000000..a5f9ac844e09
--- /dev/null
+++ b/doc/manual/installation/installing-binary.xml
@@ -0,0 +1,81 @@
+<chapter xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="ch-installing-binary">
+
+<title>Installing a Binary Distribution</title>
+
+<para>The easiest way to install Nix is to run the following command:
+
+<screen>
+$ bash &lt;(curl https://nixos.org/nix/install)
+</screen>
+
+This will perform a single-user installation of Nix, meaning that
+<filename>/nix</filename> is owned by the invoking user.  You should
+run this under your usual user account, <emphasis>not</emphasis> as
+root.  The script will invoke <command>sudo</command> to create
+<filename>/nix</filename> if it doesn’t already exist.  If you don’t
+have <command>sudo</command>, you should manually create
+<command>/nix</command> first as root:
+
+<screen>
+$ mkdir /nix
+$ chown alice /nix
+</screen>
+
+</para>
+
+<para>You can also manually download and install a binary package.
+Binary packages of the latest stable release are available for Fedora,
+Debian, Ubuntu, Mac OS X and various other systems from the <link
+xlink:href="http://nixos.org/nix/download.html">Nix homepage</link>.
+You can also get builds of the latest development release from our
+<link
+xlink:href="http://hydra.nixos.org/job/nix/master/release/latest-finished#tabs-constituents">continuous
+build system</link>.</para>
+
+<para>For Fedora, RPM packages are available.  These can be installed
+or upgraded using <command>rpm -U</command>.  For example,
+
+<screen>
+$ rpm -U nix-1.7-1.i386.rpm</screen>
+
+</para>
+
+<para>For Debian and Ubuntu, you can download a Deb package and
+install it like this:
+
+<screen>
+$ dpkg -i nix_1.7-1_amd64.deb</screen>
+
+</para>
+
+<para>For other platforms, including Mac OS X (Darwin), FreeBSD and
+other Linux distributions, you can download a binary tarball that
+contains Nix and all its dependencies.  (This is what the install
+script at <uri>https://nixos.org/nix/install</uri> uses.)  You should
+unpack it somewhere (e.g. in <filename>/tmp</filename>), and then run
+the script named <command>install</command> inside the binary tarball:
+
+<screen>
+alice$ cd /tmp
+alice$ tar xfj nix-1.7-x86_64-darwin.tar.bz2
+alice$ cd nix-1.7-x86_64-darwin
+alice$ ./install
+</screen>
+
+</para>
+
+<para>Nix can be uninstalled using <command>rpm -e nix</command> or
+<command>dpkg -r nix</command> on RPM- and Dpkg-based systems,
+respectively.  After this you should manually remove the Nix store and
+other auxiliary data, if desired:
+
+<screen>
+$ rm -rf /nix</screen>
+
+</para>
+
+</chapter>
\ No newline at end of file
diff --git a/doc/manual/installation/installing-source.xml b/doc/manual/installation/installing-source.xml
new file mode 100644
index 000000000000..77beff1bcc78
--- /dev/null
+++ b/doc/manual/installation/installing-source.xml
@@ -0,0 +1,17 @@
+<chapter xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="ch-installing-source">
+
+<title>Installing Nix from Source</title>
+
+<para>If no binary package is available, you can download and compile
+a source distribution.</para>
+
+<xi:include href="prerequisites-source.xml" />
+<xi:include href="obtaining-source.xml" />
+<xi:include href="installing-source.xml" />
+<xi:include href="building-source.xml" />
+
+</chapter>
\ No newline at end of file
diff --git a/doc/manual/installation/multi-user.xml b/doc/manual/installation/multi-user.xml
new file mode 100644
index 000000000000..2eb4c258fcf7
--- /dev/null
+++ b/doc/manual/installation/multi-user.xml
@@ -0,0 +1,106 @@
+<section xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="ssec-multi-user">
+
+<title>Multi-User Mode</title>
+
+<para>To allow a Nix store to be shared safely among multiple users,
+it is important that users are not able to run builders that modify
+the Nix store or database in arbitrary ways, or that interfere with
+builds started by other users.  If they could do so, they could
+install a Trojan horse in some package and compromise the accounts of
+other users.</para>
+
+<para>To prevent this, the Nix store and database are owned by some
+privileged user (usually <literal>root</literal>) and builders are
+executed under special user accounts (usually named
+<literal>nixbld1</literal>, <literal>nixbld2</literal>, etc.).  When a
+unprivileged user runs a Nix command, actions that operate on the Nix
+store (such as builds) are forwarded to a <emphasis>Nix
+daemon</emphasis> running under the owner of the Nix store/database
+that performs the operation.</para>
+
+<note>Multi-user mode has one important limitation: only
+<systemitem class="username">root</systemitem> can run <command
+linkend="sec-nix-pull">nix-pull</command> to register the availability
+of pre-built binaries.  However, those registrations are shared by all
+users, so they still get the benefit from <command>nix-pull</command>s
+done by <systemitem class="username">root</systemitem>.</note>
+
+
+<simplesect>
+
+<title>Setting up the build users</title>
+
+<para>The <emphasis>build users</emphasis> are the special UIDs under
+which builds are performed.  They should all be members of the
+<emphasis>build users group</emphasis> <literal>nixbld</literal>.
+This group should have no other members.  The build users should not
+be members of any other group. On Linux, you can create the group and
+users as follows:
+
+<screen>
+$ groupadd -r nixbld
+$ for n in $(seq 1 10); do useradd -c "Nix build user $n" \
+    -d /var/empty -g nixbld -G nixbld -M -N -r -s "$(which nologin)" \
+    nixbld$n; done
+</screen>
+
+This creates 10 build users. There can never be more concurrent builds
+than the number of build users, so you may want to increase this if
+you expect to do many builds at the same time.</para>
+
+</simplesect>
+
+
+<simplesect>
+
+<title>Running the daemon</title>
+
+<para>The <link linkend="sec-nix-daemon">Nix daemon</link> should be
+started as follows (as <literal>root</literal>):
+
+<screen>
+$ nix-daemon</screen>
+
+You’ll want to put that line somewhere in your system’s boot
+scripts.</para>
+
+<para>To let unprivileged users use the daemon, they should set the
+<link linkend="envar-remote"><envar>NIX_REMOTE</envar> environment
+variable</link> to <literal>daemon</literal>.  So you should put a
+line like
+
+<programlisting>
+export NIX_REMOTE=daemon</programlisting>
+
+into the users’ login scripts.</para>
+
+</simplesect>
+
+<simplesect>
+
+<title>Restricting access</title>
+
+<para>To limit which users can perform Nix operations, you can use the
+permissions on the directory
+<filename>/nix/var/nix/daemon-socket</filename>.  For instance, if you
+want to restrict the use of Nix to the members of a group called
+<literal>nix-users</literal>, do
+
+<screen>
+$ chgrp nix-users /nix/var/nix/daemon-socket
+$ chmod ug=rwx,o= /nix/var/nix/daemon-socket
+</screen>
+
+This way, users who are not in the <literal>nix-users</literal> group
+cannot connect to the Unix domain socket
+<filename>/nix/var/nix/daemon-socket/socket</filename>, so they cannot
+perform Nix operations.</para>
+
+</simplesect>
+
+
+</section>
\ No newline at end of file
diff --git a/doc/manual/installation/nix-security.xml b/doc/manual/installation/nix-security.xml
new file mode 100644
index 000000000000..d888ff14d457
--- /dev/null
+++ b/doc/manual/installation/nix-security.xml
@@ -0,0 +1,27 @@
+<chapter xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="ch-nix-security">
+
+<title>Security</title>
+
+<para>Nix has two basic security models.  First, it can be used in
+“single-user mode”, which is similar to what most other package
+management tools do: there is a single user (typically <systemitem
+class="username">root</systemitem>) who performs all package
+management operations.  All other users can then use the installed
+packages, but they cannot perform package management operations
+themselves.</para>
+
+<para>Alternatively, you can configure Nix in “multi-user mode”.  In
+this model, all users can perform package management operations — for
+instance, every user can install software without requiring root
+privileges.  Nix ensures that this is secure.  For instance, it’s not
+possible for one user to overwrite a package used by another user with
+a Trojan horse.</para>
+
+<xi:include href="single-user.xml" />
+<xi:include href="multi-user.xml" />
+
+</chapter>
\ No newline at end of file
diff --git a/doc/manual/installation/obtaining-source.xml b/doc/manual/installation/obtaining-source.xml
new file mode 100644
index 000000000000..968822cc066e
--- /dev/null
+++ b/doc/manual/installation/obtaining-source.xml
@@ -0,0 +1,30 @@
+<section xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="sec-obtaining-source">
+
+<title>Obtaining a Source Distribution</title>
+
+<para>The source tarball of the most recent stable release can be
+downloaded from the <link
+xlink:href="http://nixos.org/nix/download.html">Nix homepage</link>.
+You can also grab the <link
+xlink:href="http://hydra.nixos.org/job/nix/master/release/latest-finished#tabs-constituents">most
+recent development release</link>.</para>
+
+<para>Alternatively, the most recent sources of Nix can be obtained
+from its <link
+xlink:href="https://github.com/NixOS/nix">Git
+repository</link>.  For example, the following command will check out
+the latest revision into a directory called
+<filename>nix</filename>:</para>
+
+<screen>
+$ git clone https://github.com/NixOS/nix</screen>
+
+<para>Likewise, specific releases can be obtained from the <link
+xlink:href="https://github.com/NixOS/nix/tags">tags</link> of the
+repository.</para>
+
+</section>
\ No newline at end of file
diff --git a/doc/manual/installation/prerequisites-source.xml b/doc/manual/installation/prerequisites-source.xml
new file mode 100644
index 000000000000..47adc9a4fd67
--- /dev/null
+++ b/doc/manual/installation/prerequisites-source.xml
@@ -0,0 +1,73 @@
+<section xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="sec-prerequisites-source">
+
+<title>Prerequisites</title>
+
+<itemizedlist>
+
+  <listitem><para>GNU Make.</para></listitem>
+
+  <listitem><para>A version of GCC or Clang that supports C++11.</para></listitem>
+
+  <listitem><para>Perl 5.8 or higher.</para></listitem>
+
+  <listitem><para><command>pkg-config</command> to locate
+  dependencies.  If your distribution does not provide it, you can get
+  it from <link
+  xlink:href="http://www.freedesktop.org/wiki/Software/pkg-config"
+  />.</para></listitem>
+
+  <listitem><para>The bzip2 compressor program and the
+  <literal>libbz2</literal> library.  Thus you must have bzip2
+  installed, including development headers and libraries.  If your
+  distribution does not provide these, you can obtain bzip2 from <link
+  xlink:href="http://www.bzip.org/"/>.</para></listitem>
+
+  <listitem><para>The SQLite embedded database library, version 3.6.19
+  or higher.  If your distribution does not provide it, please install
+  it from <link xlink:href="http://www.sqlite.org/" />.</para></listitem>
+
+  <listitem><para>The Perl DBI and DBD::SQLite libraries, which are
+  available from <link
+  xlink:href="http://search.cpan.org/">CPAN</link> if your
+  distribution does not provide them.</para></listitem>
+
+  <listitem><para>The <link
+  xlink:href="http://www.hpl.hp.com/personal/Hans_Boehm/gc/">Boehm
+  garbage collector</link> to reduce the evaluator’s memory
+  consumption (optional).  To enable it, install
+  <literal>pkgconfig</literal> and the Boehm garbage collector, and
+  pass the flag <option>--enable-gc</option> to
+  <command>configure</command>.</para></listitem>
+
+  <listitem><para>The <command>xmllint</command> and
+  <command>xsltproc</command> programs to build this manual and the
+  man-pages.  These are part of the <literal>libxml2</literal> and
+  <literal>libxslt</literal> packages, respectively.  You also need
+  the <link
+  xlink:href="http://docbook.sourceforge.net/projects/xsl/">DocBook
+  XSL stylesheets</link> and optionally the <link
+  xlink:href="http://www.docbook.org/schemas/5x"> DocBook 5.0 RELAX NG
+  schemas</link>.  Note that these are only required if you modify the
+  manual sources or when you are building from the Git
+  repository.</para></listitem>
+
+  <listitem><para>Recent versions of Bison and Flex to build the
+  parser.  (This is because Nix needs GLR support in Bison and
+  reentrancy support in Flex.)  For Bison, you need version 2.6, which
+  can be obtained from the <link
+  xlink:href="ftp://alpha.gnu.org/pub/gnu/bison">GNU FTP
+  server</link>.  For Flex, you need version 2.5.35, which is
+  available on <link
+  xlink:href="http://lex.sourceforge.net/">SourceForge</link>.
+  Slightly older versions may also work, but ancient versions like the
+  ubiquitous 2.5.4a won't.  Note that these are only required if you
+  modify the parser or when you are building from the Git
+  repository.</para></listitem>
+
+</itemizedlist>
+
+</section>
\ No newline at end of file
diff --git a/doc/manual/installation/single-user.xml b/doc/manual/installation/single-user.xml
new file mode 100644
index 000000000000..09cdaa5d4898
--- /dev/null
+++ b/doc/manual/installation/single-user.xml
@@ -0,0 +1,21 @@
+<section xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="sec-single-user">
+
+<title>Single-User Mode</title>
+
+<para>In single-user mode, all Nix operations that access the database
+in <filename><replaceable>prefix</replaceable>/var/nix/db</filename>
+or modify the Nix store in
+<filename><replaceable>prefix</replaceable>/store</filename> must be
+performed under the user ID that owns those directories.  This is
+typically <systemitem class="username">root</systemitem>.  (If you
+install from RPM packages, that’s in fact the default ownership.)
+However, on single-user machines, it is often convenient to
+<command>chown</command> those directories to your normal user account
+so that you don’t have to <command>su</command> to <systemitem
+class="username">root</systemitem> all the time.</para>
+
+</section>
\ No newline at end of file
diff --git a/doc/manual/installation/supported-platforms.xml b/doc/manual/installation/supported-platforms.xml
new file mode 100644
index 000000000000..a31c6431f002
--- /dev/null
+++ b/doc/manual/installation/supported-platforms.xml
@@ -0,0 +1,38 @@
+<chapter xmlns="http://docbook.org/ns/docbook"
+      xmlns:xlink="http://www.w3.org/1999/xlink"
+      xmlns:xi="http://www.w3.org/2001/XInclude"
+      version="5.0"
+      xml:id="ch-supported-platforms">
+
+<title>Supported Platforms</title>
+
+<para>Nix is currently supported on the following platforms:
+
+<itemizedlist>
+
+  <listitem><para>Linux (particularly on x86, x86_64, and
+  PowerPC).</para></listitem>
+
+  <listitem><para>Mac OS X.</para></listitem>
+
+  <listitem><para>FreeBSD (only tested on Intel).</para></listitem>
+
+  <!--
+  <listitem><para>Windows through <link
+  xlink:href="http://www.cygwin.com/">Cygwin</link>.</para>
+
+  <warning><para>On Cygwin, Nix <emphasis>must</emphasis> be installed
+  on an NTFS partition.  It will not work correctly on a FAT
+  partition.</para></warning>
+
+  </listitem>
+  -->
+
+</itemizedlist>
+
+</para>
+
+<para>Nix is pretty portable, so it should work on most other Unix
+platforms as well.</para>
+
+</chapter>
\ No newline at end of file