Massive configuration overhaul

Currently paying the price of months of non-diligent git usage.

Here's what has changed.

- Theming support in Gvcci and wpgtk
- Dropping support for i3
- Supporting EXWM
- Many Elisp modules
- Collapsed redundant directories in ./configs

10 files changed, 0 insertions, 1385 deletions

diff --git a/configs/shared/misc/.config/compton.conf b/configs/shared/misc/.config/compton.conf
deleted file mode 100644
index ae06b19aba8f..000000000000
--- a/configs/shared/misc/.config/compton.conf
+++ /dev/null
@@ -1,24 +0,0 @@
-# shadow
-shadow = true;
-shadow-radius = 7;
-shadow-offset-x = -7;
-shadow-offset-y = -7;
-
-# opacity
-menu-opacity = 0.8;
-inactive-opacity = 0.8;
-
-# transitions
-fading = true;
-fade-in-step = 0.07;
-fade-out-step = 0.07;
-
-# lock screen
-# NOTE: Need this rule here because I set XSECURELOCK_NO_COMPOSITE=1 in
-# ~/.profile. Without this, the lock screen will adopt the opacity settings
-# above, which is a security risk if you lock your screen while it has sensitive
-# content on it.
-#
-# NOTE: For some reason, `100:class_g` doesn't work, so settling for
-# `99:class_g` instead.
-opacity-rule = [ "99:class_g = 'xsecurelock'" ];
diff --git a/configs/shared/misc/.config/i3/config.shared b/configs/shared/misc/.config/i3/config.shared
deleted file mode 100644
index b39b634704dc..000000000000
--- a/configs/shared/misc/.config/i3/config.shared
+++ /dev/null
@@ -1,279 +0,0 @@
-# Keymapping philosophy:
-# When I feel it's appropriate, I try to borrow existing KBDs from OSX or
-# Windows. For example, I use Ctrl+Alt+Del to start the screen lock, since this
-# is a really well-known KBD. One notable difference is that when I'm borrowing
-# OSX KBDs, I prefer using Alt instead of Super since the keyboard that I'm
-# using has the Alt key in the same location as the Super key on my mac
-# keyboard. I could rebind this, and I just may. But for now, that's worth
-# pointing out.
-# The reason behind borrowing from Windows and OSX is that some of these
-# keybindings are hardwired into my muscle memory. I also tend to work between
-# Linux and OSX quite often. Since OSX is much more difficult to remap KBDs
-# than it is in Linux, I prefer to support the OSX KBDs to reduce the number of
-# KBDs my feeble memory needs to store.
-
-set $mod Mod1
-set $super Mod4
-
-# Font for window titles. Will also be used by the bar unless a different font
-# is used in the bar {} block below.
-font pango:monospace 8
-
-# Use Mouse+$mod to drag floating windows to their wanted position
-floating_modifier $mod
-
-# i3-gaps (depends on i3-gaps installation)
-gaps inner 20
-gaps outer 0
-smart_gaps on
-
-bindsym $mod+Ctrl+plus   gaps outer current plus  5
-bindsym $mod+Ctrl+minus  gaps outer current minus 5
-bindsym $mod+Shift+plus  gaps inner current plus  5
-bindsym $mod+Shift+minus gaps inner current minus 5
-
-# KBD Principles:
-# $mod+Ctrl+<app_char>       = starting an application
-# where <app_char> is a reserved character for a commonly used application.
-#
-# <app_char> definitions:
-# terminal = t, Return
-# emacs    = e
-# chrome   = c
-# spotify  = s
-# intellij = i
-#
-# Vertical
-bindsym $mod+Ctrl+t      exec st
-bindsym $mod+Ctrl+Return exec st
-bindsym $mod+Ctrl+e      exec emacsclient --create-frame ~/programming
-bindsym $mod+Ctrl+c      exec google-chrome
-bindsym $mod+Ctrl+s      exec spotify
-bindsym $mod+Ctrl+i      exec zsh -i -c intellij
-
-# support dmenu-based bookmarks
-bindsym $mod+Ctrl+b exec dmenu <$DOTFILES/bookmarks.txt | xargs $BROWSER
-
-bindsym $mod+Return exec st
-
-# pass integration
-bindsym $mod+Ctrl+backslash exec ~/.config/i3/passmenu # mirroring the 1password KBD
-
-# integrate with Emacs's org-mode
-bindsym $mod+o exec zsh -i -c org_capture
-for_window [class="GoogleEmacs" instance="org-protocol-capture"] floating enable
-
-# ensure Spotify windows float
-for_window [class="Spotify"] floating enable
-
-# ensure `lf` instances float
-for_window [title="lf"] floating enable
-
-# ensure wallpaper
-exec --no-startup-id feh --bg-scale ~/.local/share/wallpaper/cartoon-outdoors.jpg
-
-# ensure system service that run through XDG start
-exec dex -ae i3
-
-# dmenu configuration
-bindsym $mod+space exec --no-startup-id dmenu_run
-bindsym $mod+t exec --no-startup-id ~/.config/i3/dmenu_timer.sh ~/.local/share/sounds/gong.mp3
-
-# file manager
-bindsym $mod+n exec st -e lf ~/Dropbox
-
-# clipboard manager
-# NOTE: Ctrl-c is already covered since `clipmenu` listens for X clipboard
-# events using `clipnotify`.
-# NOTE: `clipmenud` is started in `.xsessionrc.shared`
-# NOTE: This is a bit of a hack intended to support pasting in both the terminal
-# and in GUI applications. `st` expects `ctrl+Shift+v` while GUIs expect
-# `ctrl+v`. In the instances where GUIs don't support `ctrl+Shift+v` already, it
-# acts like `ctrl+v`, so it should "just work".
-bindsym Ctrl+$mod+v exec clipmenu && xdotool key --clearmodifiers ctrl+Shift+v
-
-# Screenshot
-# TODO: find a better KBD for this
-bindsym $mod+s exec zsh -i -c snipit # note that this eclipses Tmux's M-s KBD for switching b/w session
-bindsym Ctrl+Print   exec scrot ~/Pictures/screenshots/%b-%d-%Y_%T.png # Windows style
-# TODO: debug
-# bindsym $mod+Print   exec scrot --focused ~/Pictures/screenshots/%b-%d-%Y_%T.png # Windows style
-
-# online documentation
-bindsym $mod+Shift+slash exec google-chrome https://i3wm.org/docs/userguide.html
-
-# no title bars
-for_window [class="^.*"] border pixel 2
-
-# disable mouse hover focus
-focus_follows_mouse no
-
-# kill focused window
-bindsym $mod+q kill
-
-# GTK Themes
-exec --no-startup-id gnome-settings-daemon
-
-# wireless selection mechanism
-exec --no-startup-id nm-applet
-
-# set the split direction
-bindsym $mod+v split vertical
-# cannot bind $mod+h because of movement commands
-bindsym $mod+Shift+v split horizontal
-
-# lock the screen (Window's famous Ctrl-Alt-Delete)
-bindsym $mod+Ctrl+Delete exec xsecurelock
-bindsym $mod+Shift+q     exec xsecurelock
-
-# sound applet
-exec --no-startup-id gnome-sound-applet
-
-# change focus
-bindsym $mod+h focus left
-bindsym $mod+j focus down
-bindsym $mod+k focus up
-bindsym $mod+l focus right
-
-# move focused window
-bindsym $mod+Shift+h move left  100
-bindsym $mod+Shift+j move down  100
-bindsym $mod+Shift+k move up    100
-bindsym $mod+Shift+l move right 100
-
-# enable duplicating the current window vertically or horizontally
-# bindsym $mod+- split v exec terminator
-# bindsym $mod+\ split h exec terminator
-
-# enter fullscreen mode for the focused container
-bindsym $mod+z fullscreen toggle
-
-# change container layout (stacked, tabbed, toggle split)
-bindsym $super+e layout toggle split
-bindsym $super+s layout stacking
-bindsym $super+t layout tabbed
-
-# toggle tiling / floating
-bindsym $mod+Shift+f floating toggle
-
-# toggle stickiness
-bindsym $mod+Shift+s sticky toggle
-
-# change focus between tiling / floating windows
-bindsym $mod+f focus mode_toggle
-
-# focus the parent container
-bindsym $mod+a focus parent
-bindsym $mod+Shift+a focus child
-
-# Define names for default workspaces for which we configure key bindings later on.
-# We use variables to avoid repeating the names in multiple places.
-set $ws1  "1"
-set $ws2  "2"
-set $ws3  "3"
-set $ws4  "4"
-set $ws5  "5"
-set $ws6  "6"
-set $ws7  "7"
-set $ws8  "8"
-set $ws9  "9"
-set $ws10 "10"
-
-# jump to workspace
-bindsym $mod+1 workspace $ws1
-bindsym $mod+2 workspace $ws2
-bindsym $mod+3 workspace $ws3
-bindsym $mod+4 workspace $ws4
-bindsym $mod+5 workspace $ws5
-bindsym $mod+6 workspace $ws6
-bindsym $mod+7 workspace $ws7
-bindsym $mod+8 workspace $ws8
-bindsym $mod+9 workspace $ws9
-bindsym $mod+0 workspace $ws10
-
-# move and follow focused container to workspace
-bindsym $mod+Shift+1 move container to workspace $ws1;  workspace $ws1
-bindsym $mod+Shift+2 move container to workspace $ws2;  workspace $ws2
-bindsym $mod+Shift+3 move container to workspace $ws3;  workspace $ws3
-bindsym $mod+Shift+4 move container to workspace $ws4;  workspace $ws4
-bindsym $mod+Shift+5 move container to workspace $ws5;  workspace $ws5
-bindsym $mod+Shift+6 move container to workspace $ws6;  workspace $ws6
-bindsym $mod+Shift+7 move container to workspace $ws7;  workspace $ws7
-bindsym $mod+Shift+8 move container to workspace $ws8;  workspace $ws8
-bindsym $mod+Shift+9 move container to workspace $ws9;  workspace $ws9
-bindsym $mod+Shift+0 move container to workspace $ws10; workspace $ws10
-
-# move focused container to workspace
-bindsym $mod+Ctrl+1 move container to workspace $ws1
-bindsym $mod+Ctrl+2 move container to workspace $ws2
-bindsym $mod+Ctrl+3 move container to workspace $ws3
-bindsym $mod+Ctrl+4 move container to workspace $ws4
-bindsym $mod+Ctrl+5 move container to workspace $ws5
-bindsym $mod+Ctrl+6 move container to workspace $ws6
-bindsym $mod+Ctrl+7 move container to workspace $ws7
-bindsym $mod+Ctrl+8 move container to workspace $ws8
-bindsym $mod+Ctrl+9 move container to workspace $ws9
-bindsym $mod+Ctrl+0 move container to workspace $ws10
-
-# reload, restart i3
-bindsym $super+r       exec cat ~/.config/i3/config.shared ~/.config/i3/config.device >~/.config/i3/config; reload
-bindsym $super+Shift+r exec cat ~/.config/i3/config.shared ~/.config/i3/config.device >~/.config/i3/config; restart
-
-
-# resize window (you can also use the mouse for that)
-mode "resize" {
-        bindsym h resize shrink width  10 px or 10 ppt
-        bindsym j resize shrink height 10 px or 10 ppt
-        bindsym k resize grow   height 10 px or 10 ppt
-        bindsym l resize grow   width  10 px or 10 ppt
-        bindsym Return       mode "default"
-        bindsym Caps_Lock    mode "default"
-        bindsym $mod+Shift+r mode "default"
-}
-bindsym $mod+Shift+r mode "resize"
-
-# passthrough mode to support Emacs, Tmux, Vim KBDs for window and pane management
-mode "passthrough" {
-     bindsym $mod+Escape mode "default"
-}
-bindsym $mod+Escape mode "passthrough"
-
-# Atom One Dark colors
-set $black          #1e2127
-set $red            #e06c75
-set $green          #98c379
-set $yellow         #d19a66
-set $blue           #61afef
-set $magenta        #c678dd
-set $cyan           #56b6c2
-set $white          #abb2bf
-set $bright_black   #5c6370
-set $bright_red     #e06c75
-set $bright_green   #98c379
-set $bright_yellow  #d19a66
-set $bright_white   #ffffff
-set $bright_blue    #61afef
-set $bright_magenta #c678dd
-set $bright_cyan    #56b6c2
-set $selection      #3a3f4b
-
-# class                 # border    # bg # text #indicator #child_border
-client.focused          $red        $red $red   $magenta   $bright_cyan
-client.focused_inactive $red        $red $red   $magenta   $black
-client.unfocused        $red        $red $red   $magenta   $black
-
-bar {
-    status_command i3status
-    position top
-    # disable system tray icons
-    tray_output none
-    colors {
-           background $black
-           statusline $white
-           separator  $yellow
-           focused_workspace  $black $black $bright_cyan
-           active_workspace   $red $bright_blue $blue
-           inactive_workspace $black $black $bright_black
-           urgent_workspace   $magenta $black $magenta
-    }
-}
\ No newline at end of file
diff --git a/configs/shared/misc/.config/i3/dmenu_timer.sh b/configs/shared/misc/.config/i3/dmenu_timer.sh
deleted file mode 100755
index 9d62ead73091..000000000000
--- a/configs/shared/misc/.config/i3/dmenu_timer.sh
+++ /dev/null
@@ -1,113 +0,0 @@
-#!/usr/bin/env bash
-
-# Select common timer intervals with dmenu and play an alarm sound when
-# finished. Useful if you bind a KBD in a window manager such as i3. Pass the
-# path to the alarm mp3 as the only argument.
-#
-# Usage: ./dmenu_timer.sh path/to/alarm.mp3
-
-times=$(cat <<EOF
-1 minute
-2 minutes
-3 minutes
-4 minutes
-5 minutes
-10 minutes
-15 minutes
-20 minutes
-30 minutes
-45 minutes
-1 hour
-2 hours
-EOF
-)
-selection=$(echo "$times" | dmenu)
-
-case $selection in
-  '1 minute')
-    notify-send 'Timer' 'Set for 1 minute' && \
-      sleep 1m && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  '2 minutes')
-    notify-send 'Timer' 'Set for 2 minute' && \
-      sleep 2m && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  '3 minutes')
-    notify-send 'Timer' 'Set for 3 minutes' && \
-      sleep 3m && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  '4 minutes')
-    notify-send 'Timer' 'Set for 4 minutes' && \
-      sleep 4m && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  '5 minutes')
-    notify-send 'Timer' 'Set for 5 minutes' && \
-      sleep 5m && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  '10 minutes')
-    notify-send 'Timer' 'Set for 10 minutes' && \
-      sleep 10m && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  '15 minutes')
-    notify-send 'Timer' 'Set for 15 minutes' && \
-      sleep 15m && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  '20 minutes')
-    notify-send 'Timer' 'Set for 20 minutes' && \
-      sleep 20m && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  '30 minutes')
-    notify-send 'Timer' 'Set for 30 minutes' && \
-      sleep 30m && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  '45 minutes')
-    notify-send 'Timer' 'Set for 45 minutes' && \
-      sleep 45m && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  '1 hour')
-    notify-send 'Timer' 'Set for 1 hour' && \
-      sleep 1h && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  '2 hours')
-    notify-send 'Timer' 'Set for 2 hours' && \
-      sleep 2h && \
-      notify-send 'Timer' 'Finished.' && \
-      mpg123 $1 && \
-      exit 0
-    ;;
-  *)
-    notify-send 'Timer' 'No supported time selected. Exiting...' && exit 1
-esac
diff --git a/configs/shared/misc/.config/i3/passmenu b/configs/shared/misc/.config/i3/passmenu
deleted file mode 100755
index 71c4538fa61a..000000000000
--- a/configs/shared/misc/.config/i3/passmenu
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/usr/bin/env bash
-
-shopt -s nullglob globstar
-
-typeit=0
-if [[ $1 == "--type" ]]; then
-	typeit=1
-	shift
-fi
-
-prefix=${PASSWORD_STORE_DIR-~/.password-store}
-password_files=( "$prefix"/**/*.gpg )
-password_files=( "${password_files[@]#"$prefix"/}" )
-password_files=( "${password_files[@]%.gpg}" )
-
-password=$(printf '%s\n' "${password_files[@]}" | dmenu "$@")
-
-[[ -n $password ]] || exit
-
-if [[ $typeit -eq 0 ]]; then
-	pass show -c "$password" 2>/dev/null
-else
-	pass show "$password" | { IFS= read -r pass; printf %s "$pass"; } |
-		xdotool type --clearmodifiers --file -
-fi
\ No newline at end of file
diff --git a/configs/shared/misc/.config/i3/workspace_1.json b/configs/shared/misc/.config/i3/workspace_1.json
deleted file mode 100644
index b5d3f9d8c53f..000000000000
--- a/configs/shared/misc/.config/i3/workspace_1.json
+++ /dev/null
@@ -1,76 +0,0 @@
-// vim:ts=4:sw=4:et
-{
-    // splitv split container with 2 children
-    "border": "normal",
-    "floating": "auto_off",
-    "layout": "splitv",
-    "percent": 0.5,
-    "type": "con",
-    "nodes": [
-        {
-            "border": "pixel",
-            "current_border_width": 3,
-            "floating": "auto_off",
-            "geometry": {
-               "height": 925,
-               "width": 1072,
-               "x": 0,
-               "y": 0
-            },
-            "name": "emacs@wpcarro.lon.corp.google.com",
-            "percent": 0.5,
-            "swallows": [
-               {
-               "class": "^GoogleEmacs$",
-               "instance": "^emacs$",
-               "title": "^google-emacs$"
-               }
-            ],
-            "type": "con"
-        },
-        {
-            "border": "pixel",
-            "current_border_width": 3,
-            "floating": "auto_off",
-            "geometry": {
-               "height": 484,
-               "width": 724,
-               "x": 0,
-               "y": 0
-            },
-            "name": "i3-save-tree",
-            "percent": 0.5,
-            "swallows": [
-               {
-               "class": "^st\\-256color$",
-               "instance": "^st\\-256color$",
-               "title": "^st-term$"
-               }
-            ],
-            "type": "con"
-        }
-    ]
-}
-
-{
-    "border": "pixel",
-    "current_border_width": 3,
-    "floating": "auto_off",
-    "geometry": {
-       "height": 2125,
-       "width": 1914,
-       "x": 1923,
-       "y": 32
-    },
-    "name": "i3: Layout saving in i3 - Google Chrome",
-    "percent": 0.5,
-    "swallows": [
-       {
-       "class": "^Google\\-chrome$",
-       "instance": "^google\\-chrome$",
-       "title": "Chrome",
-       "window_role": "^browser$"
-       }
-    ],
-    "type": "con"
-}
diff --git a/configs/shared/misc/.config/lf/lfrc b/configs/shared/misc/.config/lf/lfrc
deleted file mode 100644
index 196856759b47..000000000000
--- a/configs/shared/misc/.config/lf/lfrc
+++ /dev/null
@@ -1,175 +0,0 @@
-# It might be possible to attempt to share KBDs between `lf` and `dired`.
-# Currently shared KBDs with `dired`:
-#   - D: delete file
-#   - R: rename file
-#   - +: create directory
-#   - c: create file
-#
-# The following command prefixes are used by lf (taken from the docs):
-#
-#    :  read (default)  builtin/custom command
-#    $  shell           shell command
-#    %  shell-pipe      shell command running with the ui
-#    !  shell-wait      shell command waiting for key press
-#    &  shell-async     shell command running asynchronously
-#    /  search          search file in current directory
-#    ?  search-back     search file in the reverse order
-#
-# `x` will be used as a generic prefix KBD for most of my user-defined KBDs. Do
-# not map anything to just `x`. Instead prefer `x<char>`. Mneumonically, "x" is
-# intended to resemble "eXecute".
-#
-# If `x<char>` does one thing; `x<uppercase-char>` should do the opposite when
-# possible. This is convenient for things that pass the round-trip test like
-# encrypt/decrypt, archive/unarchive.
-
-# TODO: move most of these commands to function.zsh and call those functions
-# herein. Especially the `archive` and `extract` functions.
-#
-# TODO: consider integrations with `xdg-open` and configuring filetypes to
-# behave in expected "dwim" ways.
-#
-# TODO: learn more about the terms "archive", "compress", "decompress",
-# "expand", "extract", etc. See if a larger abstraction can be created on top
-# without sacrificing too much nuance. This might be the case of "serialize",
-# "deserialize", "pickle", "unpickle", "marshal", "unmarshal", "encode",
-# "decode" -- in which case, a broader abstraction would be nice to decrease the
-# surface area of the vocabulary.
-#
-# TODO: find a way to visualize all of the bound or unbound KBDs.
-#
-# TODO: support polymorphic way encrypt/decrypt a file or directory.
-#
-# TODO: support "toggle" for encryption/decryption that detects which function
-# to run based on the extension.
-#
-# TODO: support "toggle" for archive/unarchive that detects which function to
-# run based on the extension.
-
-# Basic configuration
-set hidden on
-
-# Arguably the most import function herein
-cmd help $lf -doc | less
-
-# delete a file, dir
-map D delete
-
-cmd rename %{{
-    # Renames files, dirs.
-    set -f
-    if [ -e "$1" ]; then
-      printf 'file exists'
-    else
-      mv "$f" "$1"
-    fi
-}}
-map R push :rename<space>
-
-cmd mkdir %{{
-    mkdir -p "$1"
-}}
-map + push :mkdir<space>
-
-cmd touch %{{
-    # Create a file
-    touch "$1"
-}}
-map c push :touch<space>
-
-cmd encrypt_file %{{
-  # Encrypts the file and deletes the cleartext version.
-  # Run `decrypt_file` to return the file to its cleartext version.
-  printf "recipient: "
-  read recipient
-  gpg --encrypt --recipient "$recipient" "$f" && rm "$f"
-}}
-map xe :encrypt_file
-
-cmd decrypt_file %{{
-  # Decrypts a file that was encrypted with `encrypt_file`.
-  # Assumes encrypted files have the .gpg extension and decrypted files omit the
-  # .gpg extension.
-  # Deletes the original .gpg file when finished.
-
-  # check if file exists without .gpg extension
-  if [ -e "${f%.gpg}" ]; then
-    printf "${f%.gpg} exists. Consider deleting or renaming it. Aborting..."
-  else
-    gpg --decrypt "$f" >"${f%.gpg}" 2>/dev/null && rm "$f"
-  fi
-}}
-map xE :decrypt_file
-
-cmd archive %{{
-    # Generic function for archiving directories.
-    # TODO: support selections of multiple files.
-    set -f
-    printf "Which type of archive would you like to create? (tar,tar.gz,zip) "
-    read answer
-    case $answer in
-         tar.gz) tar -czf "$f.tar.gz" "$(basename $f)"; rm -rf "$f";;
-         tar)    tar -cf "$f.tar" "$(basename $f)"; rm -rf "$f";;
-         zip)    zip -r "$f.zip" "$(basename $f)"; rm -rf "$f";;
-         *)      printf "\"$1\" is not a support archive. Aborting..."
-    esac
-}}
-map xa :archive
-
-cmd unarchive %{{
-    # Generic function for extracting archived directories.
-    # Assumes directories were archived with the `archive`.
-    set -f
-    case $f in
-         *.tar.gz) tar -xzvf $f; rm "$f";;
-         *.tar)    tar -xvf  $f; rm "$f";;
-         *.zip)    unzip "$f"; rm "$f";;
-         # TODO: grab extension from $f and display it in `printf` call.
-         *)        printf "Unsupported archive type. Aborting..."
-    esac
-}}
-map xA: unarchive
-
-cmd tar %{{
-    # tars a directory
-    set -f
-    printf "gzip? (y,n) "
-    read answer
-    case $answer in
-         y) tar -czf "$f.tar.gz" "$(basename $f)"; rm -rf "$f";;
-         n) tar -cf  "$f.tar"    "$(basename $f)"; rm -rf "$f";;
-         *) printf "\"$answer\" is not a supported answer. Aborting...";;
-    esac
-}}
-map xt :tar
-
-cmd untar %{{
-    # untars a directory tar'd with `tar`.
-    set -f
-    case $f in
-         *.tar.gz) tar -xzvf $f; rm "$f";;
-         *.tar)    tar -xvf  $f; rm "$f";;
-    esac
-}}
-map xT :untar
-
-cmd zip %{{
-    # zip a directory
-    set -f
-    zip -r "$f.zip" "$(basename $f)"
-    rm -rf "$f"
-}}
-map xz :zip
-
-cmd unzip %{{
-    # unzip a directory
-    set -f
-    unzip "$f"
-    rm "$f"
-}}
-map xZ :unzip
-
-# outputs the size of a particular file, dir
-# TODO: consider mapping this to a KBD
-cmd size %du -hs "$f"
-map xs :size
diff --git a/configs/shared/misc/.config/lf/marks b/configs/shared/misc/.config/lf/marks
deleted file mode 100644
index a62bd91b859f..000000000000
--- a/configs/shared/misc/.config/lf/marks
+++ /dev/null
@@ -1,5 +0,0 @@
-':/usr/local/google/home/wpcarro
-D:~/Dropbox
-c:~/Dropbox/dotfiles/configs
-d:~/Dropbox/dotfiles
-s:~/Pictures/screenshots
diff --git a/configs/shared/misc/.config/nvim/init.vim b/configs/shared/misc/.config/nvim/init.vim
deleted file mode 100644
index 6e4122b40d39..000000000000
--- a/configs/shared/misc/.config/nvim/init.vim
+++ /dev/null
@@ -1,667 +0,0 @@
-" -- BEGIN: Vundle config --
-set nocompatible              " be iMproved, required
-filetype off                  " required
-
-" set the runtime path to include Vundle and initialize
-" share Vundle between vim and neovim
-set rtp+=~/.vim/bundle/Vundle.vim
-set rtp+=~/.config/nvim/bundle/Vundle.vim
-call vundle#begin()
-" alternatively, pass a path where Vundle should install plugins
-"call vundle#begin('~/some/path/here')
-
-" let Vundle manage Vundle, required
-Plugin 'VundleVim/Vundle.vim'
-
-" The following are examples of different formats supported.
-" Keep Plugin commands between vundle#begin/end.
-
-" Displays git information in airline.
-Plugin 'tpope/vim-fugitive'
-
-" easier file navigation
-Plugin 'tpope/vim-vinegar'
-
-" Displays git-tracked C*UD ops within gutter.
-Plugin 'airblade/vim-gitgutter'
-
-" Fuzzy-finder
-Plugin 'kien/ctrlp.vim'
-
-" Grep file contents
-Plugin 'mileszs/ack.vim'
-
-" JS support
-Plugin 'pangloss/vim-javascript'
-
-" JSX support
-Plugin 'mxw/vim-jsx'
-
-" Syntax Highlighting Support
-Plugin 'lambdatoast/elm.vim'
-
-" Elixir Plugins
-Plugin 'elixir-lang/vim-elixir'
-Plugin 'slashmili/alchemist.vim'
-Plugin 'powerman/vim-plugin-AnsiEsc'
-
-" TypeScript Plugins
-Plugin 'rschmukler/typescript-vim'
-
-" Themes
-Plugin 'sickill/vim-monokai'
-Plugin 'altercation/vim-colors-solarized'
-Plugin 'mhartington/oceanic-next'
-
-" Executes shell commands and pipes output into new Vim buffer.
-Plugin 'sjl/clam.vim'
-
-" Multiple cursors for simultaneous edits.
-" NOTE: use <C-n> to run miltiple cursors not <C-d>
-Plugin 'terryma/vim-multiple-cursors'
-
-" Visualize buffers
-Plugin 'vim-airline/vim-airline'
-Plugin 'vim-airline/vim-airline-themes'
-
-" Visually align assignments
-Plugin 'godlygeek/tabular'
-
-" Visually Highlight and comment code.
-Plugin 'tpope/vim-commentary'
-
-" Macros for quotes, parens, etc.
-Plugin 'tpope/vim-surround'
-
-" Allows Plugins to be repeated with `.` character
-Plugin 'tpope/vim-repeat'
-
-" Pairs of mappings
-Plugin 'tpope/vim-unimpaired'
-
-" LISPs support
-Plugin 'guns/vim-sexp'
-Plugin 'tpope/vim-sexp-mappings-for-regular-people'
-let g:sexp_enable_insert_mode_mappings = 0
-let g:sexp_filetypes = ''
-
-" Seamlessly navigate Vim and Tmux with similar bindings.
-Plugin 'christoomey/vim-tmux-navigator'
-
-" Async `:make` for code linting etc.
-Plugin 'neomake/neomake'
-
-" Color pack
-Plugin 'flazz/vim-colorschemes'
-
-" Better buffer mgt than CtrlP
-Plugin 'yegappan/mru'
-
-Plugin 'zanglg/nova.vim'
-
-" Emulates Emacs's Helm Swoop search
-Plugin 'pelodelfuego/vim-swoop'
-
-" Fish Shell support
-Plugin 'dag/vim-fish'
-
-" Gotham colorscheme
-Plugin 'whatyouhide/vim-gotham'
-
-" Transparent encryption + decryption
-Plugin 'jamessan/vim-gnupg'
-
-" Javascript auto-formatting
-Plugin 'prettier/vim-prettier', {
-  \ 'do': 'yarn install',
-  \ 'for': ['javascript', 'typescript', 'css', 'less', 'scss', 'json', 'graphql', 'markdown'] }
-
-" Support Org mode
-Plugin 'jceb/vim-orgmode'
-
-" ReaosnML
-Plugin 'reasonml-editor/vim-reason-plus'
-
-" Autocompletion
-Plugin 'junegunn/fzf'
-
-" Better JSON highlighting
-Plugin 'elzr/vim-json'
-
-" Text objects made easy
-Plugin 'kana/vim-textobj-user'
-
-" Elixir text objects
-Plugin 'andyl/vim-textobj-elixir'
-
-" Making HTML editing faster
-Plugin 'mattn/emmet-vim'
-
-" Snippets for all languages
-Plugin 'honza/vim-snippets'
-
-" Automatic bracket insertion
-Plugin 'jiangmiao/auto-pairs'
-
-" Linting & error warnings
-Plugin 'vim-syntastic/syntastic'
-
-" Atom colorscheme
-Plugin 'rakr/vim-one'
-
-" Nix syntax highlighting
-Plugin 'LnL7/vim-nix'
-
-call vundle#end()            " required
-filetype plugin indent on    " required
-" Put your non-Plugin stuff after this line
-" -- END: Vundle config --
-
-" Changes <leader> to <space> character.
-let mapleader = " "
-
-
-" Highlight column width
-set textwidth=80
-set colorcolumn=+0
-
-" autoreload a file when it changes on disk
-set autoread
-
-" default to case-insensitive searching
-set ignorecase
-
-" JSX configuration
-let g:jsx_ext_required = 0
-
-
-autocmd FileType reason nnoremap <buffer> gd :call LanguageClient_textDocument_definition()<CR>
-autocmd FileType reason nnoremap <buffer> gf :call LanguageClient_textDocument_formatting()<CR>
-autocmd FileType reason nnoremap <buffer> gh :call LanguageClient_textDocument_hover()<CR>
-autocmd FileType reason nnoremap <buffer> gr :call LanguageClient_textDocument_rename()<CR>
-
-" Replace <CR> with G for faster navigation
-nnoremap <CR> G
-
-
-" Syntastic configuration
-set statusline+=%#warningmsg#
-set statusline+=%{SyntasticStatuslineFlag()}
-set statusline+=%*
-
-let g:syntastic_always_populate_loc_list = 1
-let g:syntastic_auto_loc_list = 1
-let g:syntastic_check_on_open = 1
-let g:syntastic_check_on_wq = 0
-let g:syntastic_javascript_checkers = ['eslint']
-let g:syntastic_javascript_eslint_generic = 1
-" this is a hack to prevent a false negative
-" https://github.com/vim-syntastic/syntastic/issues/1692
-let g:syntastic_javascript_eslint_exec = '/bin/ls'
-let g:syntastic_javascript_eslint_exe = 'npx eslint'
-let g:syntastic_javascript_eslint_args = '-f compact'
-
-" javascript autocompletion
-autocmd FileType javascript setlocal omnifunc=javascriptcomplete#CompleteJS
-autocmd FileType javascript nnoremap <buffer> gf :Prettier<CR>
-
-" Maximize the current window
-" Similar to Tmux mapping alt-z in my tmux.conf
-nnoremap t% :tab sp<CR>
-
-" Allow C-g to act like C-c the way it does in Emacs
-cnoremap <C-g> <C-c>
-
-" Prettier configuration
-let g:prettier#exec_cmd_async = 1
-" force Prettier to run on files even without the @format pragma
-let g:prettier#autoformat = 0
-
-
-" Basic settings
-" Thin cursor on INSERT mode
-if has('nvim')
-  let $NVIM_TUI_ENABLE_CURSOR_SHAPE = 1
-endif
-
-set number
-set nowrap
-set tabstop=2
-set expandtab
-set shiftwidth=2
-set background=dark
-
-syntax enable
-colorscheme one
-set background=dark
-
-" Vim in terminal cannot have a different font from the one set within your
-" terminal. However, this setting will set the font for the GUI version.
-if has('gui_running')
-  set guifont=Operator\ Mono:h12
-endif
-
-if has('termguicolors')
-  set termguicolors
-endif
-
-if &term =~# '^screen'
-  let &t_8f = "\<Esc>[38;2;%lu;%lu;%lum"
-  let &t_8b = "\<Esc>[48;2;%lu;%lu;%lum"
-endif
-
-set history=1000
-set undolevels=1000
-
-set t_Co=255
-
-" Support italics
-highlight Comment cterm=italic
-
-
-" quickly edit popular configuration files
-nnoremap <leader>ev :vsplit $MYVIMRC<CR>
-nnoremap <leader>ee :vsplit ~/.emacs.d/init.el<CR>
-nnoremap <leader>ez :vsplit ~/.zshrc<CR>
-nnoremap <leader>ea :vsplit ~/aliases.zsh<CR>
-nnoremap <leader>ef :vsplit ~/functions.zsh<CR>
-nnoremap <leader>el :vsplit ~/variables.zsh<CR>
-nnoremap <leader>ex :vsplit ~/.Xresources<CR>
-nnoremap <leader>ei :vsplit ~/.config/i3/config.shared<CR>
-
-" quickly source your vimrc
-nnoremap <leader>sv :source $MYVIMRC<CR>
-
-" quickly edit your snippets
-nnoremap <leader>es :vsplit<CR>:edit ~/.vim/bundle/vim-snippets/snippets/reason.snippets<CR>
-
-
-" Auto resize window splits
-autocmd VimResized * wincmd =
-
-
-" Neomake Settings
-autocmd! BufWritePost * Neomake
-
-" Elixir linting
-let g:neomake_elixir_credo_maker = {
-      \ 'exe': 'mix',
-      \ 'args': ['credo', 'list', '%:p', '--format=oneline'],
-      \ 'errorformat':
-      \   '%W[F] %. %f:%l:%c %m,' .
-      \   '%W[F] %. %f:%l %m,' .
-      \   '%W[R] %. %f:%l:%c %m,' .
-      \   '%W[R] %. %f:%l %m,' .
-      \   '%I[C] %. %f:%l:%c %m,' .
-      \   '%I[C] %. %f:%l %m,' .
-      \   '%-Z%.%#'
-      \ }
-
-
-let g:neomake_elixir_enabled_makers = ['mix', 'credo']
-
-augroup my_error_signs
-  au!
-  autocmd ColorScheme * hi NeomakeErrorSign ctermfg=203 guifg=#ff5f5f
-  autocmd ColorScheme * hi NeomakeWarningSign ctermfg=209 guifg=#ffaf00
-  autocmd ColorScheme * hi NeomakeInfoSign ctermfg=183 guifg=#dfafff
-  autocmd ColorScheme * hi NeomakeMessageSign ctermfg=27 guifg=#0087ff
-augroup END
-
-
-let g:neomake_error_sign = {
-            \ 'text': '>>',
-            \ 'texthl': 'NeoMakeErrorSign',
-            \ }
-
-let g:neomake_warning_sign = {
-            \ 'text': '>>',
-            \ 'texthl': 'NeoMakeWarningSign',
-            \ }
-
-let g:neomake_info_sign = {
-            \ 'text': '>>',
-            \ 'texthl': 'NeoMakeInfoSign',
-            \ }
-
-let g:neomake_message_sign = {
-            \ 'text': '>>',
-            \ 'texthl': 'NeoMakeMessageSign',
-            \ }
-
-function! <SID>LocationPrevious()
-  try
-    lprev
-  catch /^Vim\%((\a\+)\)\=:E553/
-    llast
-  endtry
-endfunction
-
-function! <SID>LocationNext()
-  try
-    lnext
-  catch /^Vim\%((\a\+)\)\=:E553/
-    lfirst
-  endtry
-endfunction
-
-nnoremap <Leader>[ :call <SID>LocationPrevious()<CR>
-nnoremap <Leader>] :call <SID>LocationNext()<CR>
-
-
-" Alchemist settings
-let g:alchemist#elixir_erlang_src = '/usr/local/share/src'
-
-
-" Airline Settings
-" Enables the list of buffers.
-let g:airline#extensions#tabline#enabled = 0
-
-" Buffer numbers alongside files
-let g:airline#extensions#tabline#buffer_nr_show = 0
-
-" Shows the filename only.
-let g:airline#extensions#tabline#fnamemod = ':t'
-
-" Allow glyphs in airline
-let g:airline_powerline_fonts = 1
-
-" Change Airline theme
-let g:airline_theme = 'hybrid'
-
-
-" Vim-Swoop Settings
-" Edits colorscheme
-let g:swoopHighlight = ["hi! link SwoopBufferLineHi Warning", "hi! link SwoopPatternHi Error"]
-
-
-" Jump to buffers.
-nmap <F1> :1b<CR>
-nmap <F2> :2b<CR>
-nmap <F3> :3b<CR>
-nmap <F4> :4b<CR>
-nmap <F5> :5b<CR>
-nmap <F6> :6b<CR>
-nmap <F7> :7b<CR>
-nmap <F8> :8b<CR>
-nmap <F9> :9b<CR>
-
-
-" It's the twenty-first century...no swaps.
-set noswapfile
-
-
-" Allow visual tab completion in command mode
-set wildmenu
-
-
-" Show Vim commands as they're being input.
-set showcmd
-
-
-" Code folding
-" set foldmethod=indent
-" set foldnestmax=10
-" set nofoldenable
-" set foldlevel=4
-
-
-" emulate ci" and ci' behavior
-nnoremap ci( f(%ci(
-nnoremap ci[ f[%ci[
-
-
-" extend functionality of <C-e> & <C-y> scrolling
-nnoremap <C-e> <C-e>j
-vnoremap <C-e> <C-e>j
-nnoremap <C-y> <C-y>k
-vnoremap <C-y> <C-y>k
-
-
-" Opens all folds within the buffer
-" nnoremap ZZ zR
-
-" Closes all folds within the buffer
-" nnoremap zz zM
-
-" Opens all folds beneath the cursor
-" NOTE: j is the character to go down
-" nnoremap zJ zO
-
-" Opens single fold beneath the cursor
-" NOTE: j is the character to go down
-" nnoremap zj zo
-
-" Opens single fold beneath the cursor
-" NOTE: k is the character to go down
-" nnoremap zK zC
-
-" Opens single fold beneath the cursor
-" NOTE: k is the character to go down
-" nnoremap zk zc
-
-
-" Save shortcut
-nnoremap <C-s> :w<CR>
-
-
-" Switch to MRU'd buffer
-nnoremap <leader><leader> <C-^>
-
-
-" Alternative MRU to CtrlP MRU
-nnoremap <leader>b :MRU<CR>
-
-
-" Supports mouse interaction.
-set mouse=a
-
-
-" Highlights matches during a search.
-set hlsearch
-
-" Clear highlight
-noremap <silent> <leader>h :nohlsearch<bar>:echo<CR>
-
-
-" backspace settings
-set backspace=2
-set backspace=indent,eol,start
-
-
-" Javascript specific variables
-let g:javascript_plugin_jsdoc = 1
-
-" GlobalListchars
-set list
-set listchars=tab:··,trail:·,nbsp:·
-
-
-" Keeps everything concealed at all times. Even when cursor is on the word.
-set conceallevel=1
-set concealcursor=nvic
-
-
-" map jk to <Esc>
-inoremap jk <Esc>
-
-
-" Hybrid mode for Vim
-inoremap <C-a> <Esc>I
-inoremap <C-e> <Esc>A
-
-inoremap <M-b> <S-Left>
-inoremap <M-f> <S-Right>
-
-inoremap <C-b> <Left>
-inoremap <C-f> <Right>
-inoremap <C-p> <Up>
-inoremap <C-n> <Down>
-
-
-" Manage Vertical and Horizontal splits
-nnoremap sl <Esc>:vs<CR><C-w>l
-nnoremap sh <Esc>:vs<CR>
-nnoremap sj <Esc>:sp<CR><C-w>j
-nnoremap sk <Esc>:sp<CR>
-
-
-" Delete (i.e. "close") the currently opened buffer
-" TODO: unless it's a split window, which should be :q
-nnoremap <leader>q :bdelete<CR>
-
-
-" Set CtrlP runtime path
-set runtimepath^=~/.vim/bundle/ctrlp.vim
-
-
-" Pane movement
-let g:tmux_navigator_no_mappings = 1
-
-nnoremap <silent> <M-h> :TmuxNavigateLeft<CR>
-nnoremap <silent> <M-j> :TmuxNavigateDown<CR>
-nnoremap <silent> <M-k> :TmuxNavigateUp<CR>
-nnoremap <silent> <M-l> :TmuxNavigateRight<CR>
-nnoremap <silent> <M-q> :q<CR>
-
-" make Y do what is intuitive given:
-"   D: deletes until EOL
-"   C: changes until EOL
-"   Y: (should) yank until EOL
-nnoremap Y y$
-
-
-" scrolling and maintaing mouse position
-" nnoremap <C-j> j<C-e>
-" nnoremap <C-k> k<C-y>
-
-
-" remap redo key that is eclipsed by `rotate` currently
-nnoremap U :redo<CR>
-
-
-" Define highlighting groups
-" NOTE: The ANSII aliases for colors will change when iTerm2 settings are
-" changed.
-highlight InterestingWord1 ctermbg=Magenta ctermfg=Black
-highlight InterestingWord2 ctermbg=Blue ctermfg=Black
-
-" h1 highlighting
-nnoremap <silent> <leader>1 :execute '2match InterestingWord1 /\<<c-r><c-w>\>/'<CR>
-nnoremap <silent> <leader>x1 :execute '2match none'<CR>
-vnoremap <silent> <leader>1 :execute '2match InterestingWord1 /\<<c-r><c-w>\>/'<CR>
-
-" h2 highlighting
-nnoremap <silent> <leader>2 :execute '3match InterestingWord2 /\<<c-r><c-w>\>/'<CR>
-nnoremap <silent> <leader>x2 :execute '3match none'<CR>
-
-"clear all highlighted groups
-nnoremap <silent> <leader>xx :execute '2match none'<CR> :execute '3match none'<CR> hh
-
-
-" pasteboard copy & paste
-set clipboard+=unnamedplus
-
-
-" Manage 80 char line limits
-highlight OverLength1 ctermbg=Magenta ctermfg=Black
-highlight OverLength2 ctermbg=LightMagenta ctermfg=Black
-highlight OverLength3 ctermbg=White ctermfg=Black
-" match OverLength3 /\%81v.\+/
-match OverLength2 /\%91v.\+/
-" match OverLength3 /\%101v.\+/
-
-nnoremap <leader>w :w<CR>
-
-
-" Resize split to 10,20,...,100 chars
-" Uncomment the next lines for support at those sizes.
-" These bindings interfere with the highlight groups, however.
-" Increases the width of a vertical split.
-" nnoremap <leader>1 :vertical resize 10<CR>
-" nnoremap <leader>2 :vertical resize 20<CR>
-nnoremap <leader>3 :vertical resize 30<CR>
-nnoremap <leader>4 :vertical resize 40<CR>
-nnoremap <leader>5 :vertical resize 50<CR>
-nnoremap <leader>6 :vertical resize 60<CR>
-nnoremap <leader>7 :vertical resize 70<CR>
-nnoremap <leader>8 :vertical resize 80<CR>
-nnoremap <leader>9 :vertical resize 90<CR>
-nnoremap <leader>0 :vertical resize 100<CR>
-
-
-" Increases the height of a horizontal split.
-nnoremap <leader>v1 :resize 5<CR>
-nnoremap <leader>v2 :resize 10<CR>
-nnoremap <leader>v3 :resize 15<CR>
-nnoremap <leader>v4 :resize 20<CR>
-nnoremap <leader>v5 :resize 25<CR>
-nnoremap <leader>v6 :resize 30<CR>
-nnoremap <leader>v7 :resize 35<CR>
-nnoremap <leader>v8 :resize 40<CR>
-nnoremap <leader>v9 :resize 45<CR>
-nnoremap <leader>v0 :resize 50<CR>
-
-
-" BOL and EOL
-nnoremap H ^
-vnoremap H ^
-nnoremap L $
-vnoremap L $
-
-
-" Search for visually selected text
-vnoremap // y/<C-r>"<CR>N
-
-
-" trim trailing whitespace on save
-autocmd BufWritePre *.{js,py,tpl,less,html,ex,exs,txt} :%s/\s\+$//e
-
-
-" Use .gitignore file to populate Ctrl-P
-let g:ctrlp_user_command = ['.git', 'cd %s && git ls-files . -co --exclude-standard', 'find %s -type f']
-
-
-" Ignores dirs and files
-let g:ctrlp_custom_ignore = {
-  \ 'dir':  'node_modules',
-  \ 'file': '\v\.(exe|dll|png|jpg|jpeg)$'
-\}
-
-
-" WIP: Run elixir tests on that line
-" TODO: only register binding in *.exs? file extensions
-nnoremap <leader>t :call ExTestToggle()<CR>
-
-
-" Jumps from an Elixir module file to an Elixir test file.
-fun! ExTestToggle()
-  if expand('%:e') == "ex"
-
-    let test_file_name = expand('%:t:r') . "_test.exs"
-    let test_file_dir = substitute(expand('%:p:h'), "/lib/", "/test/", "")
-    let full_test_path = join([test_file_dir, test_file_name], "/")
-
-    e `=full_test_path`
-
-  elseif match(expand('%:t'), "_test.exs") != -1
-
-    let test_file_name = expand('%:t:r')
-    let offset_amt = strlen(test_file_name) - strlen("_test")
-    let module_file_name = strpart(test_file_name, 0, offset_amt) . ".ex"
-    let module_file_dir = substitute(expand('%:p:h'), "/test/", "/lib/", "")
-    let full_module_path = join([module_file_dir, module_file_name], "/")
-
-    e `=full_module_path`
-
-  endif
-endfun
-
-
-" Creates intermediate directories and file to match current buffer's filepath
-fun! CreateNonExistingDirsAndFile()
-  ! echo "Creating directory..." && mkdir -p %:p:h && echo "Created directory." && echo "Creating file..." && touch %:t:p && echo "Created file."
-
-  " Write the buffer to the recently created file.
-  w
-endfun
diff --git a/configs/shared/misc/.config/rofi/config b/configs/shared/misc/.config/rofi/config
deleted file mode 100644
index 3bc0a7cab04e..000000000000
--- a/configs/shared/misc/.config/rofi/config
+++ /dev/null
@@ -1 +0,0 @@
-rofi.theme: /usr/share/rofi/themes//lb.rasi
diff --git a/configs/shared/misc/.config/terminator/config b/configs/shared/misc/.config/terminator/config
deleted file mode 100644
index 5e62b9d4be5c..000000000000
--- a/configs/shared/misc/.config/terminator/config
+++ /dev/null
@@ -1,20 +0,0 @@
-[global_config]
-[keybindings]
-[layouts]
-  [[default]]
-    [[[child1]]]
-      parent = window0
-      type = Terminal
-    [[[window0]]]
-      parent = ""
-      type = Window
-[plugins]
-[profiles]
-  [[default]]
-    background_type = transparent
-    cursor_color = "#aaaaaa"
-    cursor_shape = ibeam
-    font = Source Code Pro 12
-    scrollbar_position = hidden
-    show_titlebar = False
-    use_system_font = False