Massive configuration overhaul

Currently paying the price of months of non-diligent git usage.

Here's what has changed.

- Theming support in Gvcci and wpgtk
- Dropping support for i3
- Supporting EXWM
- Many Elisp modules
- Collapsed redundant directories in ./configs

23 files changed, 2257 insertions, 0 deletions

diff --git a/configs/shared/.config/compton.conf b/configs/shared/.config/compton.conf
new file mode 100644
index 000000000000..a6b5f637e60a
--- /dev/null
+++ b/configs/shared/.config/compton.conf
@@ -0,0 +1,33 @@
+# shadow
+shadow = false;
+shadow-radius = 7;
+shadow-offset-x = -7;
+shadow-offset-y = -7;
+
+# TODO: Remove active opacity
+
+# opacity
+menu-opacity = 0.8;
+inactive-opacity = 0.96;
+active-opacity = 0.96;
+
+# transitions
+fading = true;
+fade-in-step = 0.07;
+fade-out-step = 0.07;
+
+# lock screen
+# NOTE: Need this rule here because I set XSECURELOCK_NO_COMPOSITE=1 in
+# ~/.profile. Without this, the lock screen will adopt the opacity settings
+# above, which is a security risk if you lock your screen while it has sensitive
+# content on it.
+#
+# NOTE: For some reason, `100:class_g` doesn't work, so settling for
+# `99:class_g` instead.
+opacity-rule = [
+  "99:class_g = 'xsecurelock'",
+  # TODO: Ensure this works.
+  "80:class_g = 'terminator'",
+  # TODO: Ensure this work.
+  "80:class_g = 'Google Emacs'"
+];
diff --git a/configs/shared/.config/i3/config b/configs/shared/.config/i3/config
new file mode 100644
index 000000000000..e52bf23b3d96
--- /dev/null
+++ b/configs/shared/.config/i3/config
@@ -0,0 +1,329 @@
+# Keymapping philosophy:
+# When I feel it's appropriate, I try to borrow existing KBDs from OSX or
+# Windows. For example, I use Ctrl+Alt+Del to start the screen lock, since this
+# is a really well-known KBD. One notable difference is that when I'm borrowing
+# OSX KBDs, I prefer using Alt instead of Super since the keyboard that I'm
+# using has the Alt key in the same location as the Super key on my mac
+# keyboard. I could rebind this, and I just may. But for now, that's worth
+# pointing out.
+# The reason behind borrowing from Windows and OSX is that some of these
+# keybindings are hardwired into my muscle memory. I also tend to work between
+# Linux and OSX quite often. Since OSX is much more difficult to remap KBDs
+# than it is in Linux, I prefer to support the OSX KBDs to reduce the number of
+# KBDs my feeble memory needs to store.
+
+set $mod Mod1
+set $window Mod1+Ctrl
+set $super Mod4
+set $terminal terminator
+set $browser  google-chrome
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar block below.
+font pango:Monospace 10px
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# i3-gaps (depends on i3-gaps installation)
+# gaps inner 7
+# gaps outer 0
+# smart_gaps on
+#
+# bindsym $mod+Ctrl+plus   gaps outer current plus  5
+# bindsym $mod+Ctrl+minus  gaps outer current minus 5
+# bindsym $mod+Shift+plus  gaps inner current plus  5
+# bindsym $mod+Shift+minus gaps inner current minus 5
+
+# Support XF86 keys for audio playback and volume control
+bindsym XF86AudioMute        exec --no-startup-id pactl set-sink-mute   @DEFAULT_SINK@ toggle
+bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10%
+bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10%
+bindsym XF86AudioPrev        exec --no-startup-id playerctl previous
+bindsym XF86AudioNext        exec --no-startup-id playerctl next
+bindsym XF86AudioStop        exec --no-startup-id playerctl play-pause
+bindsym XF86AudioPlay        exec --no-startup-id playerctl play-pause
+
+# KBD Principles:
+# $mod+Ctrl+<app_char>       = starting an application
+# where <app_char> is a reserved character for a commonly used application.
+#
+# <app_char> definitions:
+# terminal = t, Return
+# emacs    = e
+# chrome   = c
+# spotify  = s
+# intellij = i
+bindsym $mod+Ctrl+t exec $terminal
+bindsym $mod+Return exec $terminal
+bindsym $mod+Ctrl+e exec emacsclient --create-frame
+bindsym $mod+Ctrl+c exec $browser
+bindsym $mod+Ctrl+s exec spotify
+bindsym $mod+Ctrl+i exec zsh -i -c intellij
+
+# support dmenu-based bookmarks
+# bindsym $mod+Ctrl+b exec rofi -dmenu <$DOTFILES/bookmarks.txt | xargs $browser
+
+set $bookmarks_mode Bookmarks (a) add, (d) delete, (b) browse
+mode "$bookmarks_mode" {
+     bindsym a exec zsh -i -c add_bookmark,  mode "default"
+     bindsym d exec zsh -i -c rm_bookmark,   mode "default"
+     bindsym b exec zsh -i -c open_bookmark, mode "default"
+
+     bindsym Escape mode "default"
+     bindsym Ctrl+g mode "default"
+     bindsym Ctrl+c mode "default"
+}
+bindsym $mod+Ctrl+b mode "$bookmarks_mode"
+
+# pass integration
+bindsym $mod+Ctrl+backslash exec ~/.config/i3/passmenu # mirroring the 1password KBD
+
+# integrate with Emacs's org-mode
+bindsym $mod+o exec zsh -i -c org_capture
+# TODO: Support "coding size", "dialog-size" (for org_capture)
+# TODO: Support way to cycle through predefined sizes.
+for_window [class="GoogleEmacs" instance="floating"] floating enable, resize set height 1200px, resize set width 780px
+
+# Here is a sketch of the cycle sizes idea.
+# TODO: Support this.
+# mode "cycle_sizes_floating_mode" {
+#      # coding mode
+#      bindsym a for_window [mode="floating", class="actively-selected"] resize set height 1200px, resize set width 780px
+#      bindsym b for_window [mode="floating", class="actively-selected"] resize set height 500px, resize set width 500px
+#
+#      bindsym Escape mode "default"
+#      bindsym Ctrl+g mode "default"
+#      bindsym Ctrl+c mode "default"
+# }
+
+# ensure Spotify windows float
+for_window [class="Spotify"] floating enable
+
+# ensure system service that run through XDG start
+exec --no-startup-id dex -ae i3
+
+# rofi configuration
+bindsym $mod+space exec --no-startup-id rofi -show combi
+bindsym $mod+t     exec --no-startup-id ~/.config/i3/dmenu_timer.sh ~/.local/share/sounds/gong.mp3
+
+# switch workspaces
+bindsym $mod+Tab       workspace next
+bindsym $mod+Shift+Tab workspace prev
+
+# file manager
+bindsym $mod+n exec $terminal -x lf ~/Dropbox
+
+# clipboard manager
+# NOTE: Ctrl-c is already covered since `clipmenu` listens for X clipboard
+# events using `clipnotify`.
+# NOTE: `clipmenud` is started in `.xsessionrc.shared`
+# NOTE: This is a bit of a hack intended to support pasting in both the terminal
+# and in GUI applications. `st` expects `ctrl+Shift+v` while GUIs expect
+# `ctrl+v`. In the instances where GUIs don't support `ctrl+Shift+v` already, it
+# acts like `ctrl+v`, so it should "just work".
+bindsym Ctrl+$mod+v exec clipmenu && xdotool key --clearmodifiers ctrl+Shift+v
+
+# Screenshot
+# TODO: Support variants: (a) App (r) Region (f) Fullscreen.
+# TODO: Support hosting to third-party image hosting.
+set $screenshot_mode Screenshot (g) googleplex (l) local
+mode "$screenshot_mode" {
+     bindsym g exec zsh -i -c snipit,     mode "default"
+     bindsym l exec zsh -i -c screenshot, mode "default"
+
+     bindsym Escape mode "default"
+     bindsym Ctrl+g mode "default"
+     bindsym Ctrl+c mode "default"
+}
+bindsym $mod+s mode "$screenshot_mode"
+
+# online documentation
+bindsym $mod+Shift+slash exec $browser https://i3wm.org/docs/userguide.html
+
+# no title bars
+for_window [class="^.*"] border pixel 1
+
+# disable mouse hover focus
+focus_follows_mouse no
+
+# kill focused window
+bindsym $window+q kill
+
+# Toggle focus
+bindsym $window+f floating toggle
+
+# GTK Themes
+exec --no-startup-id gnome-settings-daemon
+
+# wireless selection mechanism
+exec --no-startup-id nm-applet
+
+# set the split direction
+bindsym $mod+v split vertical
+# cannot bind $mod+h because of movement commands
+bindsym $mod+Shift+v split horizontal
+
+# sound applet
+exec --no-startup-id gnome-sound-applet
+
+# change focus
+bindsym $window+h focus left
+bindsym $window+j focus down
+bindsym $window+k focus up
+bindsym $window+l focus right
+
+# move focused window
+bindsym $mod+Shift+h move left  100
+bindsym $mod+Shift+j move down  100
+bindsym $mod+Shift+k move up    100
+bindsym $mod+Shift+l move right 100
+
+# enter fullscreen mode for the focused container
+bindsym $window+z fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $super+e layout toggle split
+bindsym $super+s layout stacking
+bindsym $super+t layout tabbed
+
+# toggle tiling / floating
+bindsym $mod+Shift+f floating toggle
+
+# toggle stickiness
+bindsym $mod+Shift+s sticky toggle
+
+# focus the parent container
+# bindsym $mod+a focus parent
+bindsym $mod+Shift+a focus child
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws1  "1"
+set $ws2  "2"
+set $ws3  "3"
+set $ws4  "4"
+set $ws5  "5"
+set $ws6  "6"
+set $ws7  "7"
+set $ws8  "8"
+set $ws9  "9"
+set $ws10 "10"
+
+# jump to workspace
+bindsym $mod+1 workspace $ws1
+bindsym $mod+2 workspace $ws2
+bindsym $mod+3 workspace $ws3
+bindsym $mod+4 workspace $ws4
+bindsym $mod+5 workspace $ws5
+bindsym $mod+6 workspace $ws6
+bindsym $mod+7 workspace $ws7
+bindsym $mod+8 workspace $ws8
+bindsym $mod+9 workspace $ws9
+bindsym $mod+0 workspace $ws10
+
+# edit configuration files
+# TODO: Standardize KBDs for C,R,U,D operations.
+# TODO: Move shell script to /usr/local/bin
+# Create
+# TODO: Choose another KBD. This is temporary.
+bindsym $mod+a       exec zsh -i -c add_config
+# Read
+bindsym $mod+c       exec zsh -i -c edit_config
+# Update
+# TODO: Support operation to update_config label and path
+# Delete
+bindsym $mod+Shift+c exec zsh -i -c rm_config
+
+# move and follow focused container to workspace
+bindsym $mod+Shift+1 move container to workspace $ws1;  workspace $ws1
+bindsym $mod+Shift+2 move container to workspace $ws2;  workspace $ws2
+bindsym $mod+Shift+3 move container to workspace $ws3;  workspace $ws3
+bindsym $mod+Shift+4 move container to workspace $ws4;  workspace $ws4
+bindsym $mod+Shift+5 move container to workspace $ws5;  workspace $ws5
+bindsym $mod+Shift+6 move container to workspace $ws6;  workspace $ws6
+bindsym $mod+Shift+7 move container to workspace $ws7;  workspace $ws7
+bindsym $mod+Shift+8 move container to workspace $ws8;  workspace $ws8
+bindsym $mod+Shift+9 move container to workspace $ws9;  workspace $ws9
+bindsym $mod+Shift+0 move container to workspace $ws10; workspace $ws10
+
+# move focused container to workspace
+bindsym $mod+Ctrl+1 move container to workspace $ws1
+bindsym $mod+Ctrl+2 move container to workspace $ws2
+bindsym $mod+Ctrl+3 move container to workspace $ws3
+bindsym $mod+Ctrl+4 move container to workspace $ws4
+bindsym $mod+Ctrl+5 move container to workspace $ws5
+bindsym $mod+Ctrl+6 move container to workspace $ws6
+bindsym $mod+Ctrl+7 move container to workspace $ws7
+bindsym $mod+Ctrl+8 move container to workspace $ws8
+bindsym $mod+Ctrl+9 move container to workspace $ws9
+bindsym $mod+Ctrl+0 move container to workspace $ws10
+
+# reload, restart i3
+bindsym $super+r       exec cat ~/.config/i3/config.shared ~/.config/i3/config.device >~/.config/i3/config; reload
+bindsym $super+Shift+r exec cat ~/.config/i3/config.shared ~/.config/i3/config.device >~/.config/i3/config; restart
+
+# logout dialog
+set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown
+mode "$mode_system" {
+    bindsym l       exec --no-startup-id xsecurelock,                        mode "default"
+    bindsym e       exit,                                                    mode "default"
+    bindsym s       exec --no-startup-id xsecurelock && systemctl suspend,   mode "default"
+    bindsym h       exec --no-startup-id xsecurelock && systemctl hibernate, mode "default"
+    bindsym r       exec --no-startup-id systemctl reboot,                   mode "default"
+    bindsym Shift+s exec --no-startup-id systemctl poweroff,                 mode "default"
+
+    # back to normal: Enter or Escape
+    bindsym Escape mode "default"
+    bindsym Ctrl+g mode "default"
+    bindsym Ctrl+c mode "default"
+}
+bindsym Ctrl+Mod1+Delete mode "$mode_system"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+        bindsym h resize shrink width  10 px or 10 ppt
+        bindsym j resize shrink height 10 px or 10 ppt
+        bindsym k resize grow   height 10 px or 10 ppt
+        bindsym l resize grow   width  10 px or 10 ppt
+
+        bindsym Escape mode "default"
+        bindsym Ctrl+g mode "default"
+        bindsym Ctrl+c mode "default"
+}
+bindsym $mod+Shift+r mode "resize"
+
+# passthrough mode to support Emacs, Tmux, Vim KBDs for window and pane management
+mode "passthrough" {
+     bindsym $mod+Escape mode "default"
+}
+bindsym $mod+Escape mode "passthrough"
+
+# class                 border     backgr     text      indicator child_border
+client.focused          #83526a   #83526a   #8de0e1 #E8C35F  #83526a
+client.focused_inactive #83526a   #83526a   #8de0e1 #E8C35F  #5a3849
+client.unfocused        #5a3849 #5a3849 #8de0e1 #E8C35F  #5a3849
+client.urgent           #E8C35F   #E8C35F   #8de0e1 #E8C35F  #E8C35F
+client.placeholder      #31213f   #629c9d   #8de0e1 #31213f  #629c9d
+client.background       #31213f
+
+bar {
+    status_command i3status
+    font pango:Monospace 10px
+    position top
+    # disable system tray icons
+    tray_output none
+    colors {
+           background #31213f
+           statusline #83526a # text color in status line
+           separator  #83526a
+           # class            border     text       indicator
+           focused_workspace  #83526a   #8de0e1  #31213f
+           active_workspace   #83526a   #5a3849 #83526a
+           inactive_workspace #5a3849 #83526a   #5a3849
+           urgent_workspace   #5a3849 #83526a   #5a3849
+    }
+}
+
+# wpg integration
+exec --no-startup-id ~/.config/wpg/wp_init.sh
\ No newline at end of file
diff --git a/configs/shared/.config/i3/config.bak b/configs/shared/.config/i3/config.bak
new file mode 100644
index 000000000000..ccfae1d453b8
--- /dev/null
+++ b/configs/shared/.config/i3/config.bak
@@ -0,0 +1,330 @@
+# Keymapping philosophy:
+# When I feel it's appropriate, I try to borrow existing KBDs from OSX or
+# Windows. For example, I use Ctrl+Alt+Del to start the screen lock, since this
+# is a really well-known KBD. One notable difference is that when I'm borrowing
+# OSX KBDs, I prefer using Alt instead of Super since the keyboard that I'm
+# using has the Alt key in the same location as the Super key on my mac
+# keyboard. I could rebind this, and I just may. But for now, that's worth
+# pointing out.
+# The reason behind borrowing from Windows and OSX is that some of these
+# keybindings are hardwired into my muscle memory. I also tend to work between
+# Linux and OSX quite often. Since OSX is much more difficult to remap KBDs
+# than it is in Linux, I prefer to support the OSX KBDs to reduce the number of
+# KBDs my feeble memory needs to store.
+
+set $mod Mod1
+set $window Mod1+Ctrl
+set $super Mod4
+# TODO: Support alacritty or another fast terminal.
+set $terminal terminator
+set $browser  google-chrome
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar block below.
+font pango:Monospace 10px
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# i3-gaps (depends on i3-gaps installation)
+# gaps inner 7
+# gaps outer 0
+# smart_gaps on
+#
+# bindsym $mod+Ctrl+plus   gaps outer current plus  5
+# bindsym $mod+Ctrl+minus  gaps outer current minus 5
+# bindsym $mod+Shift+plus  gaps inner current plus  5
+# bindsym $mod+Shift+minus gaps inner current minus 5
+
+# Support XF86 keys for audio playback and volume control
+bindsym XF86AudioMute        exec --no-startup-id pactl set-sink-mute   @DEFAULT_SINK@ toggle
+bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10%
+bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10%
+bindsym XF86AudioPrev        exec --no-startup-id playerctl previous
+bindsym XF86AudioNext        exec --no-startup-id playerctl next
+bindsym XF86AudioStop        exec --no-startup-id playerctl play-pause
+bindsym XF86AudioPlay        exec --no-startup-id playerctl play-pause
+
+# KBD Principles:
+# $mod+Ctrl+<app_char>       = starting an application
+# where <app_char> is a reserved character for a commonly used application.
+#
+# <app_char> definitions:
+# terminal = t, Return
+# emacs    = e
+# chrome   = c
+# spotify  = s
+# intellij = i
+bindsym $mod+Ctrl+t exec $terminal
+bindsym $mod+Return exec $terminal
+bindsym $mod+Ctrl+e exec emacsclient --create-frame
+bindsym $mod+Ctrl+c exec $browser
+bindsym $mod+Ctrl+s exec spotify
+bindsym $mod+Ctrl+i exec zsh -i -c intellij
+
+# support dmenu-based bookmarks
+# bindsym $mod+Ctrl+b exec rofi -dmenu <$DOTFILES/bookmarks.txt | xargs $browser
+
+set $bookmarks_mode Bookmarks (a) add, (d) delete, (b) browse
+mode "$bookmarks_mode" {
+     bindsym a exec zsh -i -c add_bookmark,  mode "default"
+     bindsym d exec zsh -i -c rm_bookmark,   mode "default"
+     bindsym b exec zsh -i -c open_bookmark, mode "default"
+
+     bindsym Escape mode "default"
+     bindsym Ctrl+g mode "default"
+     bindsym Ctrl+c mode "default"
+}
+bindsym $mod+Ctrl+b mode "$bookmarks_mode"
+
+# pass integration
+bindsym $mod+Ctrl+backslash exec ~/.config/i3/passmenu # mirroring the 1password KBD
+
+# integrate with Emacs's org-mode
+bindsym $mod+o exec zsh -i -c org_capture
+# TODO: Support "coding size", "dialog-size" (for org_capture)
+# TODO: Support way to cycle through predefined sizes.
+for_window [class="GoogleEmacs" instance="floating"] floating enable, resize set height 1200px, resize set width 780px
+
+# Here is a sketch of the cycle sizes idea.
+# TODO: Support this.
+# mode "cycle_sizes_floating_mode" {
+#      # coding mode
+#      bindsym a for_window [mode="floating", class="actively-selected"] resize set height 1200px, resize set width 780px
+#      bindsym b for_window [mode="floating", class="actively-selected"] resize set height 500px, resize set width 500px
+#
+#      bindsym Escape mode "default"
+#      bindsym Ctrl+g mode "default"
+#      bindsym Ctrl+c mode "default"
+# }
+
+# ensure Spotify windows float
+for_window [class="Spotify"] floating enable
+
+# ensure system service that run through XDG start
+exec --no-startup-id dex -ae i3
+
+# rofi configuration
+bindsym $mod+space exec --no-startup-id rofi -show combi
+bindsym $mod+t     exec --no-startup-id ~/.config/i3/dmenu_timer.sh ~/.local/share/sounds/gong.mp3
+
+# switch workspaces
+bindsym $mod+Tab       workspace next
+bindsym $mod+Shift+Tab workspace prev
+
+# file manager
+bindsym $mod+n exec $terminal -x lf ~/Dropbox
+
+# clipboard manager
+# NOTE: Ctrl-c is already covered since `clipmenu` listens for X clipboard
+# events using `clipnotify`.
+# NOTE: `clipmenud` is started in `.xsessionrc.shared`
+# NOTE: This is a bit of a hack intended to support pasting in both the terminal
+# and in GUI applications. `st` expects `ctrl+Shift+v` while GUIs expect
+# `ctrl+v`. In the instances where GUIs don't support `ctrl+Shift+v` already, it
+# acts like `ctrl+v`, so it should "just work".
+bindsym Ctrl+$mod+v exec clipmenu && xdotool key --clearmodifiers ctrl+Shift+v
+
+# Screenshot
+# TODO: Support variants: (a) App (r) Region (f) Fullscreen.
+# TODO: Support hosting to third-party image hosting.
+set $screenshot_mode Screenshot (g) googleplex (l) local
+mode "$screenshot_mode" {
+     bindsym g exec zsh -i -c snipit,     mode "default"
+     bindsym l exec zsh -i -c screenshot, mode "default"
+
+     bindsym Escape mode "default"
+     bindsym Ctrl+g mode "default"
+     bindsym Ctrl+c mode "default"
+}
+bindsym $mod+s mode "$screenshot_mode"
+
+# online documentation
+bindsym $mod+Shift+slash exec $browser https://i3wm.org/docs/userguide.html
+
+# no title bars
+for_window [class="^.*"] border pixel 1
+
+# disable mouse hover focus
+focus_follows_mouse no
+
+# kill focused window
+bindsym $window+q kill
+
+# Toggle focus
+bindsym $window+f floating toggle
+
+# GTK Themes
+exec --no-startup-id gnome-settings-daemon
+
+# wireless selection mechanism
+exec --no-startup-id nm-applet
+
+# set the split direction
+bindsym $mod+v split vertical
+# cannot bind $mod+h because of movement commands
+bindsym $mod+Shift+v split horizontal
+
+# sound applet
+exec --no-startup-id gnome-sound-applet
+
+# change focus
+bindsym $window+h focus left
+bindsym $window+j focus down
+bindsym $window+k focus up
+bindsym $window+l focus right
+
+# move focused window
+bindsym $mod+Shift+h move left  100
+bindsym $mod+Shift+j move down  100
+bindsym $mod+Shift+k move up    100
+bindsym $mod+Shift+l move right 100
+
+# enter fullscreen mode for the focused container
+bindsym $window+z fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $super+e layout toggle split
+bindsym $super+s layout stacking
+bindsym $super+t layout tabbed
+
+# toggle tiling / floating
+bindsym $mod+Shift+f floating toggle
+
+# toggle stickiness
+bindsym $mod+Shift+s sticky toggle
+
+# focus the parent container
+# bindsym $mod+a focus parent
+bindsym $mod+Shift+a focus child
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws1  "1"
+set $ws2  "2"
+set $ws3  "3"
+set $ws4  "4"
+set $ws5  "5"
+set $ws6  "6"
+set $ws7  "7"
+set $ws8  "8"
+set $ws9  "9"
+set $ws10 "10"
+
+# jump to workspace
+bindsym $mod+1 workspace $ws1
+bindsym $mod+2 workspace $ws2
+bindsym $mod+3 workspace $ws3
+bindsym $mod+4 workspace $ws4
+bindsym $mod+5 workspace $ws5
+bindsym $mod+6 workspace $ws6
+bindsym $mod+7 workspace $ws7
+bindsym $mod+8 workspace $ws8
+bindsym $mod+9 workspace $ws9
+bindsym $mod+0 workspace $ws10
+
+# edit configuration files
+# TODO: Standardize KBDs for C,R,U,D operations.
+# TODO: Move shell script to /usr/local/bin
+# Create
+# TODO: Choose another KBD. This is temporary.
+bindsym $mod+a       exec zsh -i -c add_config
+# Read
+bindsym $mod+c       exec zsh -i -c edit_config
+# Update
+# TODO: Support operation to update_config label and path
+# Delete
+bindsym $mod+Shift+c exec zsh -i -c rm_config
+
+# move and follow focused container to workspace
+bindsym $mod+Shift+1 move container to workspace $ws1;  workspace $ws1
+bindsym $mod+Shift+2 move container to workspace $ws2;  workspace $ws2
+bindsym $mod+Shift+3 move container to workspace $ws3;  workspace $ws3
+bindsym $mod+Shift+4 move container to workspace $ws4;  workspace $ws4
+bindsym $mod+Shift+5 move container to workspace $ws5;  workspace $ws5
+bindsym $mod+Shift+6 move container to workspace $ws6;  workspace $ws6
+bindsym $mod+Shift+7 move container to workspace $ws7;  workspace $ws7
+bindsym $mod+Shift+8 move container to workspace $ws8;  workspace $ws8
+bindsym $mod+Shift+9 move container to workspace $ws9;  workspace $ws9
+bindsym $mod+Shift+0 move container to workspace $ws10; workspace $ws10
+
+# move focused container to workspace
+bindsym $mod+Ctrl+1 move container to workspace $ws1
+bindsym $mod+Ctrl+2 move container to workspace $ws2
+bindsym $mod+Ctrl+3 move container to workspace $ws3
+bindsym $mod+Ctrl+4 move container to workspace $ws4
+bindsym $mod+Ctrl+5 move container to workspace $ws5
+bindsym $mod+Ctrl+6 move container to workspace $ws6
+bindsym $mod+Ctrl+7 move container to workspace $ws7
+bindsym $mod+Ctrl+8 move container to workspace $ws8
+bindsym $mod+Ctrl+9 move container to workspace $ws9
+bindsym $mod+Ctrl+0 move container to workspace $ws10
+
+# reload, restart i3
+bindsym $super+r       exec cat ~/.config/i3/config.shared ~/.config/i3/config.device >~/.config/i3/config; reload
+bindsym $super+Shift+r exec cat ~/.config/i3/config.shared ~/.config/i3/config.device >~/.config/i3/config; restart
+
+# logout dialog
+set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown
+mode "$mode_system" {
+    bindsym l       exec --no-startup-id xsecurelock,                        mode "default"
+    bindsym e       exit,                                                    mode "default"
+    bindsym s       exec --no-startup-id xsecurelock && systemctl suspend,   mode "default"
+    bindsym h       exec --no-startup-id xsecurelock && systemctl hibernate, mode "default"
+    bindsym r       exec --no-startup-id systemctl reboot,                   mode "default"
+    bindsym Shift+s exec --no-startup-id systemctl poweroff,                 mode "default"
+
+    # back to normal: Enter or Escape
+    bindsym Escape mode "default"
+    bindsym Ctrl+g mode "default"
+    bindsym Ctrl+c mode "default"
+}
+bindsym Ctrl+Mod1+Delete mode "$mode_system"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+        bindsym h resize shrink width  10 px or 10 ppt
+        bindsym j resize shrink height 10 px or 10 ppt
+        bindsym k resize grow   height 10 px or 10 ppt
+        bindsym l resize grow   width  10 px or 10 ppt
+
+        bindsym Escape mode "default"
+        bindsym Ctrl+g mode "default"
+        bindsym Ctrl+c mode "default"
+}
+bindsym $mod+Shift+r mode "resize"
+
+# passthrough mode to support Emacs, Tmux, Vim KBDs for window and pane management
+mode "passthrough" {
+     bindsym $mod+Escape mode "default"
+}
+bindsym $mod+Escape mode "passthrough"
+
+# class                 border     backgr     text      indicator child_border
+# client.focused          {active}   {active}   {color15} {color2}  {active}
+# client.focused_inactive {active}   {active}   {color15} {color2}  {inactive}
+# client.unfocused        {inactive} {inactive} {color15} {color2}  {inactive}
+# client.urgent           {color2}   {color2}   {color15} {color2}  {color2}
+# client.placeholder      {color0}   {color8}   {color15} {color0}  {color8}
+# client.background       {color0}
+
+bar {
+    status_command i3status
+    font pango:Monospace 10px
+    position top
+    # disable system tray icons
+    tray_output none
+    colors {
+           # background {color0}
+           # statusline {inactive}
+           # separator  {active}
+           # class            border     text       indicator
+           # focused_workspace  {active}   {color15}  {color0}
+           # active_workspace   {active}   {inactive} {active}
+           # inactive_workspace {inactive} {active}   {inactive}
+           # urgent_workspace   {inactive} {active}   {inactive}
+    }
+}
+
+# wpg integration
+exec --no-startup-id ~/.config/wpg/wp_init.sh
\ No newline at end of file
diff --git a/configs/shared/.config/i3/dmenu_timer.sh b/configs/shared/.config/i3/dmenu_timer.sh
new file mode 100755
index 000000000000..9d62ead73091
--- /dev/null
+++ b/configs/shared/.config/i3/dmenu_timer.sh
@@ -0,0 +1,113 @@
+#!/usr/bin/env bash
+
+# Select common timer intervals with dmenu and play an alarm sound when
+# finished. Useful if you bind a KBD in a window manager such as i3. Pass the
+# path to the alarm mp3 as the only argument.
+#
+# Usage: ./dmenu_timer.sh path/to/alarm.mp3
+
+times=$(cat <<EOF
+1 minute
+2 minutes
+3 minutes
+4 minutes
+5 minutes
+10 minutes
+15 minutes
+20 minutes
+30 minutes
+45 minutes
+1 hour
+2 hours
+EOF
+)
+selection=$(echo "$times" | dmenu)
+
+case $selection in
+  '1 minute')
+    notify-send 'Timer' 'Set for 1 minute' && \
+      sleep 1m && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  '2 minutes')
+    notify-send 'Timer' 'Set for 2 minute' && \
+      sleep 2m && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  '3 minutes')
+    notify-send 'Timer' 'Set for 3 minutes' && \
+      sleep 3m && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  '4 minutes')
+    notify-send 'Timer' 'Set for 4 minutes' && \
+      sleep 4m && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  '5 minutes')
+    notify-send 'Timer' 'Set for 5 minutes' && \
+      sleep 5m && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  '10 minutes')
+    notify-send 'Timer' 'Set for 10 minutes' && \
+      sleep 10m && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  '15 minutes')
+    notify-send 'Timer' 'Set for 15 minutes' && \
+      sleep 15m && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  '20 minutes')
+    notify-send 'Timer' 'Set for 20 minutes' && \
+      sleep 20m && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  '30 minutes')
+    notify-send 'Timer' 'Set for 30 minutes' && \
+      sleep 30m && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  '45 minutes')
+    notify-send 'Timer' 'Set for 45 minutes' && \
+      sleep 45m && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  '1 hour')
+    notify-send 'Timer' 'Set for 1 hour' && \
+      sleep 1h && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  '2 hours')
+    notify-send 'Timer' 'Set for 2 hours' && \
+      sleep 2h && \
+      notify-send 'Timer' 'Finished.' && \
+      mpg123 $1 && \
+      exit 0
+    ;;
+  *)
+    notify-send 'Timer' 'No supported time selected. Exiting...' && exit 1
+esac
diff --git a/configs/shared/.config/i3/passmenu b/configs/shared/.config/i3/passmenu
new file mode 100755
index 000000000000..71c4538fa61a
--- /dev/null
+++ b/configs/shared/.config/i3/passmenu
@@ -0,0 +1,25 @@
+#!/usr/bin/env bash
+
+shopt -s nullglob globstar
+
+typeit=0
+if [[ $1 == "--type" ]]; then
+	typeit=1
+	shift
+fi
+
+prefix=${PASSWORD_STORE_DIR-~/.password-store}
+password_files=( "$prefix"/**/*.gpg )
+password_files=( "${password_files[@]#"$prefix"/}" )
+password_files=( "${password_files[@]%.gpg}" )
+
+password=$(printf '%s\n' "${password_files[@]}" | dmenu "$@")
+
+[[ -n $password ]] || exit
+
+if [[ $typeit -eq 0 ]]; then
+	pass show -c "$password" 2>/dev/null
+else
+	pass show "$password" | { IFS= read -r pass; printf %s "$pass"; } |
+		xdotool type --clearmodifiers --file -
+fi
\ No newline at end of file
diff --git a/configs/shared/.config/i3/workspace_1.json b/configs/shared/.config/i3/workspace_1.json
new file mode 100644
index 000000000000..b5d3f9d8c53f
--- /dev/null
+++ b/configs/shared/.config/i3/workspace_1.json
@@ -0,0 +1,76 @@
+// vim:ts=4:sw=4:et
+{
+    // splitv split container with 2 children
+    "border": "normal",
+    "floating": "auto_off",
+    "layout": "splitv",
+    "percent": 0.5,
+    "type": "con",
+    "nodes": [
+        {
+            "border": "pixel",
+            "current_border_width": 3,
+            "floating": "auto_off",
+            "geometry": {
+               "height": 925,
+               "width": 1072,
+               "x": 0,
+               "y": 0
+            },
+            "name": "emacs@wpcarro.lon.corp.google.com",
+            "percent": 0.5,
+            "swallows": [
+               {
+               "class": "^GoogleEmacs$",
+               "instance": "^emacs$",
+               "title": "^google-emacs$"
+               }
+            ],
+            "type": "con"
+        },
+        {
+            "border": "pixel",
+            "current_border_width": 3,
+            "floating": "auto_off",
+            "geometry": {
+               "height": 484,
+               "width": 724,
+               "x": 0,
+               "y": 0
+            },
+            "name": "i3-save-tree",
+            "percent": 0.5,
+            "swallows": [
+               {
+               "class": "^st\\-256color$",
+               "instance": "^st\\-256color$",
+               "title": "^st-term$"
+               }
+            ],
+            "type": "con"
+        }
+    ]
+}
+
+{
+    "border": "pixel",
+    "current_border_width": 3,
+    "floating": "auto_off",
+    "geometry": {
+       "height": 2125,
+       "width": 1914,
+       "x": 1923,
+       "y": 32
+    },
+    "name": "i3: Layout saving in i3 - Google Chrome",
+    "percent": 0.5,
+    "swallows": [
+       {
+       "class": "^Google\\-chrome$",
+       "instance": "^google\\-chrome$",
+       "title": "Chrome",
+       "window_role": "^browser$"
+       }
+    ],
+    "type": "con"
+}
diff --git a/configs/shared/.config/i3status/config b/configs/shared/.config/i3status/config
new file mode 100644
index 000000000000..d276046d9720
--- /dev/null
+++ b/configs/shared/.config/i3status/config
@@ -0,0 +1,58 @@
+general {
+  markup = pango
+  separator = " "
+  colors = true
+}
+
+/* order += "battery 0" # TODO: remove this if "battery 1" works for Dell */
+order += "battery 1" # trying to support two different laptops
+order += "tztime local"
+order += "tztime lon"
+order += "tztime est"
+order += "tztime pst"
+order += "disk /"
+
+disk "/" {
+  prefix_type = "decimal"
+  format = "%used/%total"
+}
+
+# Useful commands for dealing with timezones:
+# - cat /etc/timezone
+# - man date
+# - timedatectl
+tztime local {
+  format = "%d/%m/%Y"
+}
+
+tztime lon {
+  format = "LON %H:%M"
+  timezone = "Europe/London"
+}
+
+tztime est {
+  format = "NYC %H:%M"
+  timezone = "US/Eastern"
+}
+
+tztime pst {
+  format = "MTV %H:%M"
+  timezone = "US/Pacific"
+}
+
+# TODO: remove this if "battery 1" works for Dell laptop
+/* battery 0 { */
+/*   format = "Battery %percentage" */
+/*   format_down = "" # This hides the battery when there isn't any (e.g. on a Desktop) */
+/*   low_threshold = 30 */
+/*   threshold_type = time */
+/*   integer_battery_capacity = true */
+/* } */
+
+battery 1 {
+  format = "Battery %percentage"
+  format_down = "" # This hides the battery when there isn't any (e.g. on a Desktop)
+  low_threshold = 30
+  threshold_type = time
+  integer_battery_capacity = true
+}
diff --git a/configs/shared/.config/lf/lfrc b/configs/shared/.config/lf/lfrc
new file mode 100644
index 000000000000..f6045d2973c7
--- /dev/null
+++ b/configs/shared/.config/lf/lfrc
@@ -0,0 +1,163 @@
+# It might be possible to attempt to share KBDs between `lf` and `dired`.
+# Currently shared KBDs with `dired`:
+#   - D: delete file
+#   - R: rename file
+#   - +: create directory
+#   - c: create file
+#
+# The following command prefixes are used by lf (taken from the docs):
+#
+#    :  read (default)  builtin/custom command
+#    $  shell           shell command
+#    %  shell-pipe      shell command running with the ui
+#    !  shell-wait      shell command waiting for key press
+#    &  shell-async     shell command running asynchronously
+#    /  search          search file in current directory
+#    ?  search-back     search file in the reverse order
+#
+# `x` will be used as a generic prefix KBD for most of my user-defined KBDs. Do
+# not map anything to just `x`. Instead prefer `x<char>`. Mneumonically, "x" is
+# intended to resemble "eXecute".
+#
+# If `x<char>` does one thing; `x<uppercase-char>` should do the opposite when
+# possible. This is convenient for things that pass the round-trip test like
+# encrypt/decrypt, archive/unarchive.
+
+# TODO: move most of these commands to function.zsh and call those functions
+# herein. Especially the `archive` and `extract` functions.
+#
+# TODO: consider integrations with `xdg-open` and configuring filetypes to
+# behave in expected "dwim" ways.
+#
+# TODO: learn more about the terms "archive", "compress", "decompress",
+# "expand", "extract", etc. See if a larger abstraction can be created on top
+# without sacrificing too much nuance. This might be the case of "serialize",
+# "deserialize", "pickle", "unpickle", "marshal", "unmarshal", "encode",
+# "decode" -- in which case, a broader abstraction would be nice to decrease the
+# surface area of the vocabulary.
+#
+# TODO: find a way to visualize all of the bound or unbound KBDs.
+#
+# TODO: support polymorphic way encrypt/decrypt a file or directory.
+#
+# TODO: support "toggle" for encryption/decryption that detects which function
+# to run based on the extension.
+#
+# TODO: support "toggle" for archive/unarchive that detects which function to
+# run based on the extension.
+
+# Basic configuration
+set hidden on
+set info size:time
+set sortby time
+set period 1 # auto-refreshes the view
+
+# Arguably the most import function herein
+cmd help $lf -doc | less
+
+# delete a file, dir
+map D delete
+
+# reload the view
+map r load
+
+# rename files
+cmd rename %[ -e $1 ] && printf 'file exists' || mv $f $1
+map R push :rename<space>
+
+cmd mkdir %{{
+    # mkdir and cd into that dir
+    mkdir -p "$1"
+}}
+map + push :mkdir<space>
+
+cmd touch %{{
+    # Create a file
+    touch "$1"
+}}
+map c push :touch<space> # this interferes with `clear` command
+
+cmd encrypt %{{
+  # depends on my shell function, encrypt
+  zsh -i -c "encrypt $f"
+}}
+map xe :encrypt
+
+cmd decrypt %{{
+  # depends on my shell function, decrypt
+  zsh -i -c "decrypt $f"
+}}
+map xE :decrypt
+
+cmd archive %{{
+    # Generic function for archiving directories.
+    # TODO: support selections of multiple files.
+    set -f
+    printf "Which type of archive would you like to create? (tar,tar.gz,zip) "
+    read answer
+    case $answer in
+         tar.gz) tar -czf "$f.tar.gz" "$(basename $f)"; rm -rf "$f";;
+         tar)    tar -cf "$f.tar" "$(basename $f)"; rm -rf "$f";;
+         zip)    zip -r "$f.zip" "$(basename $f)"; rm -rf "$f";;
+         *)      printf "\"$1\" is not a support archive. Aborting..."
+    esac
+}}
+map xa :archive
+
+cmd unarchive %{{
+    # Generic function for extracting archived directories.
+    # Assumes directories were archived with the `archive`.
+    set -f
+    case $f in
+         *.tar.gz) tar -xzvf $f; rm "$f";;
+         *.tar)    tar -xvf  $f; rm "$f";;
+         *.zip)    unzip "$f"; rm "$f";;
+         # TODO: grab extension from $f and display it in `printf` call.
+         *)        printf "Unsupported archive type. Aborting..."
+    esac
+}}
+map xA: unarchive
+
+cmd tar %{{
+    # tars a directory
+    set -f
+    printf "gzip? (y,n) "
+    read answer
+    case $answer in
+         y) tar -czf "$f.tar.gz" "$(basename $f)"; rm -rf "$f";;
+         n) tar -cf  "$f.tar"    "$(basename $f)"; rm -rf "$f";;
+         *) printf "\"$answer\" is not a supported answer. Aborting...";;
+    esac
+}}
+map xt :tar
+
+cmd untar %{{
+    # untars a directory tar'd with `tar`.
+    set -f
+    case $f in
+         *.tar.gz) tar -xzvf $f; rm "$f";;
+         *.tar)    tar -xvf  $f; rm "$f";;
+    esac
+}}
+map xT :untar
+
+cmd zip %{{
+    # zip a directory
+    set -f
+    zip -r "$f.zip" "$(basename $f)"
+    rm -rf "$f"
+}}
+map xz :zip
+
+cmd unzip %{{
+    # unzip a directory
+    set -f
+    unzip "$f"
+    rm "$f"
+}}
+map xZ :unzip
+
+# outputs the size of a particular file, dir
+# TODO: consider mapping this to a KBD
+cmd size %du -hs "$f"
+map xs :size
diff --git a/configs/shared/.config/lf/marks b/configs/shared/.config/lf/marks
new file mode 100644
index 000000000000..aee01d1aa6c3
--- /dev/null
+++ b/configs/shared/.config/lf/marks
@@ -0,0 +1,7 @@
+':/usr/local/google/home/wpcarro/Dropbox/programming/i3-quickterm
+D:~/Dropbox
+G:/usr/local/google/home/wpcarro/Downloads
+M:/usr/local/google/home/wpcarro/Downloads
+c:~/Dropbox/dotfiles/configs
+d:~/Dropbox/dotfiles
+s:~/Pictures/screenshots
diff --git a/configs/shared/.config/mpd/database b/configs/shared/.config/mpd/database
new file mode 100644
index 000000000000..b39f769e68e0
--- /dev/null
+++ b/configs/shared/.config/mpd/database
Binary files differdiff --git a/configs/shared/.config/mpd/mpd.conf b/configs/shared/.config/mpd/mpd.conf
new file mode 100644
index 000000000000..fbb3858f3d74
--- /dev/null
+++ b/configs/shared/.config/mpd/mpd.conf
@@ -0,0 +1,4 @@
+db_file "~/.config/mpd/database"
+log_file "syslog"
+# music_directory "~/.local/share/sounds"
+auto_update "yes"
\ No newline at end of file
diff --git a/configs/shared/.config/nixpkgs/config.nix b/configs/shared/.config/nixpkgs/config.nix
new file mode 100644
index 000000000000..1dd1750ae025
--- /dev/null
+++ b/configs/shared/.config/nixpkgs/config.nix
@@ -0,0 +1,3 @@
+{
+  allowUnfree = true;
+}
diff --git a/configs/shared/.config/nvim/init.vim b/configs/shared/.config/nvim/init.vim
new file mode 100644
index 000000000000..eb7dbf3b5313
--- /dev/null
+++ b/configs/shared/.config/nvim/init.vim
@@ -0,0 +1,669 @@
+" -- BEGIN: Vundle config --
+set nocompatible              " be iMproved, required
+filetype off                  " required
+
+" set the runtime path to include Vundle and initialize
+" share Vundle between vim and neovim
+set rtp+=~/.vim/bundle/Vundle.vim
+set rtp+=~/.config/nvim/bundle/Vundle.vim
+call vundle#begin()
+" alternatively, pass a path where Vundle should install plugins
+"call vundle#begin('~/some/path/here')
+
+" let Vundle manage Vundle, required
+Plugin 'VundleVim/Vundle.vim'
+
+" Rust IDE features
+Plugin 'racer-rust/vim-racer'
+
+set hidden
+let g:racer_experimental_completer = 1
+autocmd FileType rust nmap         gd <Plug>(rust-def)
+autocmd FileType rust nmap         gs <Plug>(rust-def-split)
+autocmd FileType rust nmap         gx <Plug>(rust-def-vertical)
+autocmd FileType rust nmap <leader>gd <Plug>(rust-doc)
+
+Plugin 'xolox/vim-misc'
+
+" The following are examples of different formats supported.
+" Keep Plugin commands between vundle#begin/end.
+
+" Displays git information in airline.
+Plugin 'tpope/vim-fugitive'
+
+" easier file navigation
+Plugin 'tpope/vim-vinegar'
+
+" Displays git-tracked C*UD ops within gutter.
+Plugin 'airblade/vim-gitgutter'
+
+" Fuzzy-finder
+Plugin 'kien/ctrlp.vim'
+
+" Grep file contents
+Plugin 'mileszs/ack.vim'
+
+" Syntax and other light-weight suppor for a variety of languages
+Plugin 'sheerun/vim-polyglot'
+
+" Themes
+Plugin 'deviantfero/wpgtk.vim'
+Plugin 'rainglow/vim'
+
+
+" Executes shell commands and pipes output into new Vim buffer.
+Plugin 'sjl/clam.vim'
+
+" Multiple cursors for simultaneous edits.
+" NOTE: use <C-n> to run miltiple cursors not <C-d>
+Plugin 'terryma/vim-multiple-cursors'
+
+" Visualize buffers
+Plugin 'vim-airline/vim-airline'
+Plugin 'vim-airline/vim-airline-themes'
+
+" Visually align assignments
+Plugin 'godlygeek/tabular'
+
+" Visually Highlight and comment code.
+Plugin 'tpope/vim-commentary'
+
+" Macros for quotes, parens, etc.
+Plugin 'tpope/vim-surround'
+
+" Allows Plugins to be repeated with `.` character
+Plugin 'tpope/vim-repeat'
+
+" Pairs of mappings
+Plugin 'tpope/vim-unimpaired'
+
+" LISPs support
+Plugin 'guns/vim-sexp'
+Plugin 'tpope/vim-sexp-mappings-for-regular-people'
+let g:sexp_enable_insert_mode_mappings = 0
+let g:sexp_filetypes = ''
+
+" Seamlessly navigate Vim and Tmux with similar bindings.
+Plugin 'christoomey/vim-tmux-navigator'
+
+" Async `:make` for code linting etc.
+Plugin 'neomake/neomake'
+
+" Better buffer mgt than CtrlP
+Plugin 'yegappan/mru'
+
+Plugin 'zanglg/nova.vim'
+
+" Emulates Emacs's Helm Swoop search
+Plugin 'pelodelfuego/vim-swoop'
+
+" Transparent encryption + decryption
+Plugin 'jamessan/vim-gnupg'
+
+" Javascript auto-formatting
+" Plugin 'prettier/vim-prettier', {
+"   \ 'do': 'yarn install',
+  " \ 'for': ['javascript', 'typescript', 'css', 'less', 'scss', 'json', 'graphql', 'markdown'] }
+
+" Support Org mode
+Plugin 'jceb/vim-orgmode'
+
+" Autocompletion
+Plugin 'junegunn/fzf'
+
+" Text objects made easy
+Plugin 'kana/vim-textobj-user'
+
+" Elixir text objects
+Plugin 'andyl/vim-textobj-elixir'
+
+" Making HTML editing faster
+Plugin 'mattn/emmet-vim'
+
+" Snippets for all languages
+Plugin 'honza/vim-snippets'
+
+" Automatic bracket insertion
+Plugin 'jiangmiao/auto-pairs'
+
+" Linting & error warnings
+Plugin 'vim-syntastic/syntastic'
+
+" Angular.js support
+Plugin 'burnettk/vim-angular'
+
+" Asynchronous Linting Engine
+Plugin 'w0rp/ale'
+
+call vundle#end()            " required
+filetype plugin indent on    " required
+" Put your non-Plugin stuff after this line
+" -- END: Vundle config --
+
+" Changes <leader> to <space> character.
+let mapleader = " "
+
+
+" Highlight column width
+set textwidth=80
+set colorcolumn=+0
+
+" autoreload a file when it changes on disk
+set autoread
+
+" default to case-insensitive searching
+set ignorecase
+
+" JSX configuration
+let g:jsx_ext_required = 0
+
+
+autocmd FileType reason nnoremap <buffer> gd :call LanguageClient_textDocument_definition()<CR>
+autocmd FileType reason nnoremap <buffer> gf :call LanguageClient_textDocument_formatting()<CR>
+autocmd FileType reason nnoremap <buffer> gh :call LanguageClient_textDocument_hover()<CR>
+autocmd FileType reason nnoremap <buffer> gr :call LanguageClient_textDocument_rename()<CR>
+
+" Replace <CR> with G for faster navigation
+nnoremap <CR> G
+onoremap <CR> G
+vnoremap <CR> G
+
+" Mirror ZLE KBD
+inoremap <M-'> :echo "Working"<CR>
+
+" Syntastic configuration
+set statusline+=%#warningmsg#
+set statusline+=%{SyntasticStatuslineFlag()}
+set statusline+=%*
+
+let g:syntastic_always_populate_loc_list = 1
+let g:syntastic_auto_loc_list = 1
+let g:syntastic_check_on_open = 1
+let g:syntastic_check_on_wq = 0
+" let g:syntastic_javascript_checkers = ['eslint']
+let g:syntastic_javascript_eslint_generic = 1
+" this is a hack to prevent a false negative
+" https://github.com/vim-syntastic/syntastic/issues/1692
+" let g:syntastic_javascript_eslint_exec = '/bin/ls'
+" let g:syntastic_javascript_eslint_exe = 'npx eslint'
+" let g:syntastic_javascript_eslint_args = '-f compact'
+
+" javascript autocompletion
+" autocmd FileType javascript setlocal omnifunc=javascriptcomplete#CompleteJS
+" autocmd FileType javascript nnoremap <buffer> gf :Prettier<CR>
+
+" Maximize the current window
+" Similar to Tmux mapping alt-z in my tmux.conf
+nnoremap t% :tab sp<CR>
+
+" Allow C-g to act like C-c the way it does in Emacs
+cnoremap <C-g> <C-c>
+
+" Prettier configuration
+" let g:prettier#exec_cmd_async = 1
+" force Prettier to run on files even without the @format pragma
+" let g:prettier#autoformat = 0
+
+
+" Basic settings
+" Thin cursor on INSERT mode
+if has('nvim')
+  let $NVIM_TUI_ENABLE_CURSOR_SHAPE = 1
+endif
+
+set number
+set nowrap
+set tabstop=2
+set expandtab
+set shiftwidth=2
+set background=dark
+
+syntax enable
+colorscheme peacock
+
+" Vim in terminal cannot have a different font from the one set within your
+" terminal. However, this setting will set the font for the GUI version.
+if has('gui_running')
+  set guifont=Operator\ Mono:h12
+endif
+
+if has('termguicolors')
+  set termguicolors
+endif
+
+if &term =~# '^screen'
+  let &t_8f = "\<Esc>[38;2;%lu;%lu;%lum"
+  let &t_8b = "\<Esc>[48;2;%lu;%lu;%lum"
+endif
+
+set history=1000
+set undolevels=1000
+
+set t_Co=255
+
+" Support italics
+highlight Comment cterm=italic
+
+
+" quickly edit popular configuration files
+nnoremap <leader>ev :vsplit $MYVIMRC<CR>
+nnoremap <leader>ee :vsplit ~/.emacs.d/init.el<CR>
+nnoremap <leader>ez :vsplit ~/.zshrc<CR>
+nnoremap <leader>ea :vsplit ~/aliases.zsh<CR>
+nnoremap <leader>ef :vsplit ~/functions.zsh<CR>
+nnoremap <leader>el :vsplit ~/variables.zsh<CR>
+nnoremap <leader>ex :vsplit ~/.Xresources<CR>
+nnoremap <leader>ei :vsplit ~/.config/i3/config.shared<CR>
+
+" quickly source your vimrc
+nnoremap <leader>sv :source $MYVIMRC<CR>
+
+" quickly edit your snippets
+nnoremap <leader>es :vsplit<CR>:edit ~/.vim/bundle/vim-snippets/snippets/reason.snippets<CR>
+
+
+" Auto resize window splits
+autocmd VimResized * wincmd =
+
+
+" Neomake Settings
+autocmd! BufWritePost * Neomake
+
+" Elixir linting
+let g:neomake_elixir_credo_maker = {
+      \ 'exe': 'mix',
+      \ 'args': ['credo', 'list', '%:p', '--format=oneline'],
+      \ 'errorformat':
+      \   '%W[F] %. %f:%l:%c %m,' .
+      \   '%W[F] %. %f:%l %m,' .
+      \   '%W[R] %. %f:%l:%c %m,' .
+      \   '%W[R] %. %f:%l %m,' .
+      \   '%I[C] %. %f:%l:%c %m,' .
+      \   '%I[C] %. %f:%l %m,' .
+      \   '%-Z%.%#'
+      \ }
+
+
+let g:neomake_elixir_enabled_makers = ['mix', 'credo']
+
+augroup my_error_signs
+  au!
+  autocmd ColorScheme * hi NeomakeErrorSign ctermfg=203 guifg=#ff5f5f
+  autocmd ColorScheme * hi NeomakeWarningSign ctermfg=209 guifg=#ffaf00
+  autocmd ColorScheme * hi NeomakeInfoSign ctermfg=183 guifg=#dfafff
+  autocmd ColorScheme * hi NeomakeMessageSign ctermfg=27 guifg=#0087ff
+augroup END
+
+
+" templates
+if has("autocmd")
+  autocmd BufNewFile *.c  0r ~/.config/nvim/templates/boilerplate.c
+  autocmd BufNewFile *.rs 0r ~/.config/nvim/templates/boilerplate.rs
+endif
+
+let g:neomake_error_sign = {
+            \ 'text': '>>',
+            \ 'texthl': 'NeoMakeErrorSign',
+            \ }
+
+let g:neomake_warning_sign = {
+            \ 'text': '>>',
+            \ 'texthl': 'NeoMakeWarningSign',
+            \ }
+
+let g:neomake_info_sign = {
+            \ 'text': '>>',
+            \ 'texthl': 'NeoMakeInfoSign',
+            \ }
+
+let g:neomake_message_sign = {
+            \ 'text': '>>',
+            \ 'texthl': 'NeoMakeMessageSign',
+            \ }
+
+function! <SID>LocationPrevious()
+  try
+    lprev
+  catch /^Vim\%((\a\+)\)\=:E553/
+    llast
+  endtry
+endfunction
+
+function! <SID>LocationNext()
+  try
+    lnext
+  catch /^Vim\%((\a\+)\)\=:E553/
+    lfirst
+  endtry
+endfunction
+
+nnoremap <Leader>[ :call <SID>LocationPrevious()<CR>
+nnoremap <Leader>] :call <SID>LocationNext()<CR>
+
+
+" Alchemist settings
+let g:alchemist#elixir_erlang_src = '/usr/local/share/src'
+
+
+" Airline Settings
+" Enables the list of buffers.
+let g:airline#extensions#tabline#enabled = 0
+
+" Buffer numbers alongside files
+let g:airline#extensions#tabline#buffer_nr_show = 0
+
+" Shows the filename only.
+let g:airline#extensions#tabline#fnamemod = ':t'
+
+" Allow glyphs in airline
+let g:airline_powerline_fonts = 1
+
+" Change Airline theme
+let g:airline_theme = 'hybrid'
+
+
+" Vim-Swoop Settings
+" Edits colorscheme
+let g:swoopHighlight = ["hi! link SwoopBufferLineHi Warning", "hi! link SwoopPatternHi Error"]
+
+
+" Jump to buffers.
+nmap <F1> :1b<CR>
+nmap <F2> :2b<CR>
+nmap <F3> :3b<CR>
+nmap <F4> :4b<CR>
+nmap <F5> :5b<CR>
+nmap <F6> :6b<CR>
+nmap <F7> :7b<CR>
+nmap <F8> :8b<CR>
+nmap <F9> :9b<CR>
+
+
+" It's the twenty-first century...no swaps.
+set noswapfile
+
+
+" Allow visual tab completion in command mode
+set wildmenu
+
+
+" Show Vim commands as they're being input.
+set showcmd
+
+
+" Code folding
+" set foldmethod=indent
+" set foldnestmax=10
+" set nofoldenable
+" set foldlevel=4
+
+
+" emulate ci" and ci' behavior
+nnoremap ci( f(%ci(
+nnoremap ci[ f[%ci[
+
+
+" extend functionality of <C-e> & <C-y> scrolling
+nnoremap <C-e> <C-e>j
+vnoremap <C-e> <C-e>j
+nnoremap <C-y> <C-y>k
+vnoremap <C-y> <C-y>k
+
+
+" Opens all folds within the buffer
+" nnoremap ZZ zR
+
+" Closes all folds within the buffer
+" nnoremap zz zM
+
+" Opens all folds beneath the cursor
+" NOTE: j is the character to go down
+" nnoremap zJ zO
+
+" Opens single fold beneath the cursor
+" NOTE: j is the character to go down
+" nnoremap zj zo
+
+" Opens single fold beneath the cursor
+" NOTE: k is the character to go down
+" nnoremap zK zC
+
+" Opens single fold beneath the cursor
+" NOTE: k is the character to go down
+" nnoremap zk zc
+
+
+" Save shortcut
+nnoremap <C-s> :w<CR>
+
+
+" Switch to MRU'd buffer
+nnoremap <leader><leader> <C-^>
+
+
+" Alternative MRU to CtrlP MRU
+nnoremap <leader>b :MRU<CR>
+
+
+" Supports mouse interaction.
+set mouse=a
+
+
+" Highlights matches during a search.
+set hlsearch
+
+" Clear highlight
+noremap <silent> <leader>h :nohlsearch<bar>:echo<CR>
+
+
+" backspace settings
+set backspace=2
+set backspace=indent,eol,start
+
+
+" Javascript specific variables
+let g:javascript_plugin_jsdoc = 1
+
+" GlobalListchars
+set list
+set listchars=tab:··,trail:·,nbsp:·
+
+
+" Keeps everything concealed at all times. Even when cursor is on the word.
+set conceallevel=1
+set concealcursor=nvic
+
+
+" map jk to <Esc>
+inoremap jk <Esc>
+
+
+" Hybrid mode for Vim
+inoremap <C-a> <Esc>I
+inoremap <C-e> <Esc>A
+
+inoremap <M-b> <S-Left>
+inoremap <M-f> <S-Right>
+
+inoremap <C-b> <Left>
+inoremap <C-f> <Right>
+inoremap <C-p> <Up>
+inoremap <C-n> <Down>
+
+" temporarily disable <C-p> in normal mode so it doesn't attempt to index all of
+" Google3.
+nnoremap <C-p> :echo "You are attempting to index all of Google3. Aborting..."<CR>
+
+" tab maintenence
+nnoremap <C-t> :tabnew<CR>
+nnoremap <C-w> :tabclose<CR>
+nnoremap <Tab> :tabnext<CR>
+nnoremap <S-Tab> :tabprevious<CR>
+
+" Manage Vertical and Horizontal splits
+nnoremap sl <Esc>:vs<CR><C-w>l
+nnoremap sh <Esc>:vs<CR>
+nnoremap sj <Esc>:sp<CR><C-w>j
+nnoremap sk <Esc>:sp<CR>
+
+
+" Delete (i.e. "close") the currently opened buffer
+" TODO: unless it's a split window, which should be :q
+nnoremap <leader>q :bdelete<CR>
+
+
+" Set CtrlP runtime path
+set runtimepath^=~/.vim/bundle/ctrlp.vim
+
+
+" Pane movement
+let g:tmux_navigator_no_mappings = 1
+
+nnoremap <silent> <M-h> :TmuxNavigateLeft<CR>
+nnoremap <silent> <M-j> :TmuxNavigateDown<CR>
+nnoremap <silent> <M-k> :TmuxNavigateUp<CR>
+nnoremap <silent> <M-l> :TmuxNavigateRight<CR>
+nnoremap <silent> <M-q> :q<CR>
+
+" make Y do what is intuitive given:
+"   D: deletes until EOL
+"   C: changes until EOL
+"   Y: (should) yank until EOL
+nnoremap Y y$
+
+
+" scrolling and maintaing mouse position
+" nnoremap <C-j> j<C-e>
+" nnoremap <C-k> k<C-y>
+
+
+" remap redo key that is eclipsed by `rotate` currently
+nnoremap U :redo<CR>
+
+
+" Define highlighting groups
+" NOTE: The ANSII aliases for colors will change when iTerm2 settings are
+" changed.
+highlight InterestingWord1 ctermbg=Magenta ctermfg=Black
+highlight InterestingWord2 ctermbg=Blue ctermfg=Black
+
+" h1 highlighting
+nnoremap <silent> <leader>1 :execute '2match InterestingWord1 /\<<c-r><c-w>\>/'<CR>
+nnoremap <silent> <leader>x1 :execute '2match none'<CR>
+vnoremap <silent> <leader>1 :execute '2match InterestingWord1 /\<<c-r><c-w>\>/'<CR>
+
+" h2 highlighting
+nnoremap <silent> <leader>2 :execute '3match InterestingWord2 /\<<c-r><c-w>\>/'<CR>
+nnoremap <silent> <leader>x2 :execute '3match none'<CR>
+
+"clear all highlighted groups
+nnoremap <silent> <leader>xx :execute '2match none'<CR> :execute '3match none'<CR> hh
+
+
+" pasteboard copy & paste
+set clipboard+=unnamedplus
+
+
+" Manage 80 char line limits
+highlight OverLength1 ctermbg=Magenta ctermfg=Black
+highlight OverLength2 ctermbg=LightMagenta ctermfg=Black
+highlight OverLength3 ctermbg=White ctermfg=Black
+" match OverLength3 /\%81v.\+/
+match OverLength2 /\%91v.\+/
+" match OverLength3 /\%101v.\+/
+
+nnoremap <leader>w :w<CR>
+
+
+" Resize split to 10,20,...,100 chars
+" Uncomment the next lines for support at those sizes.
+" These bindings interfere with the highlight groups, however.
+" Increases the width of a vertical split.
+" nnoremap <leader>1 :vertical resize 10<CR>
+" nnoremap <leader>2 :vertical resize 20<CR>
+nnoremap <leader>3 :vertical resize 30<CR>
+nnoremap <leader>4 :vertical resize 40<CR>
+nnoremap <leader>5 :vertical resize 50<CR>
+nnoremap <leader>6 :vertical resize 60<CR>
+nnoremap <leader>7 :vertical resize 70<CR>
+nnoremap <leader>8 :vertical resize 80<CR>
+nnoremap <leader>9 :vertical resize 90<CR>
+nnoremap <leader>0 :vertical resize 100<CR>
+
+
+" Increases the height of a horizontal split.
+nnoremap <leader>v1 :resize 5<CR>
+nnoremap <leader>v2 :resize 10<CR>
+nnoremap <leader>v3 :resize 15<CR>
+nnoremap <leader>v4 :resize 20<CR>
+nnoremap <leader>v5 :resize 25<CR>
+nnoremap <leader>v6 :resize 30<CR>
+nnoremap <leader>v7 :resize 35<CR>
+nnoremap <leader>v8 :resize 40<CR>
+nnoremap <leader>v9 :resize 45<CR>
+nnoremap <leader>v0 :resize 50<CR>
+
+
+" BOL and EOL
+nnoremap H ^
+vnoremap H ^
+nnoremap L $
+vnoremap L $
+
+
+" Search for visually selected text
+vnoremap // y/<C-r>"<CR>N
+
+
+" trim trailing whitespace on save
+" Are there any file type where I wouldn't want this?
+autocmd BufWritePre *.{js,py,tpl,less,html,ex,exs,txt,hs,java,rs,ml} :%s/\s\+$//e
+
+
+" Use .gitignore file to populate Ctrl-P
+let g:ctrlp_user_command = ['.git', 'cd %s && git ls-files . -co --exclude-standard', 'find %s -type f']
+
+
+" Ignores dirs and files
+let g:ctrlp_custom_ignore = {
+  \ 'dir':  'node_modules',
+  \ 'file': '\v\.(exe|dll|png|jpg|jpeg)$'
+\}
+
+
+" WIP: Run elixir tests on that line
+" TODO: only register binding in *.exs? file extensions
+nnoremap <leader>t :call ExTestToggle()<CR>
+
+
+" Jumps from an Elixir module file to an Elixir test file.
+fun! ExTestToggle()
+  if expand('%:e') == "ex"
+
+    let test_file_name = expand('%:t:r') . "_test.exs"
+    let test_file_dir = substitute(expand('%:p:h'), "/lib/", "/test/", "")
+    let full_test_path = join([test_file_dir, test_file_name], "/")
+
+    e `=full_test_path`
+
+  elseif match(expand('%:t'), "_test.exs") != -1
+
+    let test_file_name = expand('%:t:r')
+    let offset_amt = strlen(test_file_name) - strlen("_test")
+    let module_file_name = strpart(test_file_name, 0, offset_amt) . ".ex"
+    let module_file_dir = substitute(expand('%:p:h'), "/test/", "/lib/", "")
+    let full_module_path = join([module_file_dir, module_file_name], "/")
+
+    e `=full_module_path`
+
+  endif
+endfun
+
+
+" Creates intermediate directories and file to match current buffer's filepath
+fun! CreateNonExistingDirsAndFile()
+  ! echo "Creating directory..." && mkdir -p %:p:h && echo "Created directory." && echo "Creating file..." && touch %:t:p && echo "Created file."
+
+  " Write the buffer to the recently created file.
+  w
+endfun
diff --git a/configs/shared/.config/nvim/simple.vim b/configs/shared/.config/nvim/simple.vim
new file mode 100644
index 000000000000..ea40964ee803
--- /dev/null
+++ b/configs/shared/.config/nvim/simple.vim
@@ -0,0 +1,98 @@
+" My barebones vimrc without any Vundle dependencies.
+"
+" I'm attempting to optimize the following:
+" - Minimize dependencies
+" - Maximize ergonomics
+" - Maximize Tmux compatibility
+" - Minimize shadowing of existing Vim KBDs
+"
+" Warning: This is currently unstable as it is a work-in-progress.
+"
+" Author: William Carroll <wpcarro@gmail.com>
+
+" Use <Space> as the leader key.
+let mapleader = " "
+nnoremap <leader>ev :tabnew<CR>:edit ~/.vimrc<CR>
+nnoremap <leader>sv :source ~/.vimrc<CR>
+nnoremap <leader>w  :w<CR>
+nnoremap <leader>h  :help 
+
+" increment,decrement numbers
+nnoremap + <C-a>
+" TODO: Restore with better KBD
+" nnoremap - <C-x>
+
+" Visit the CWD
+nnoremap - :e .<CR>
+
+" Turn line numbers on.
+set number
+
+" Easily create vertical, horizontal window splits.
+nnoremap sh :vsplit<CR>
+nnoremap sj :split<CR>:wincmd j<CR>
+nnoremap sk :split<CR>
+nnoremap sl :vsplit<CR>:wincmd l<CR>
+
+" Move across window splits.
+" TODO: Change to <M-{h,j,k,l}>.
+nnoremap <C-h> :wincmd h<CR>
+nnoremap <C-j> :wincmd j<CR>
+nnoremap <C-k> :wincmd k<CR>
+nnoremap <C-l> :wincmd l<CR>
+
+" TODO: Support these.
+" nnoremap <M-q> :q<CR>
+" nnoremap <M-h> :wincmd h<CR>
+" nnoremap <M-j> :wincmd j<CR>
+" nnoremap <M-k> :wincmd k<CR>
+" nnoremap <M-l> :wincmd l<CR>
+
+" Use <Enter> instead of G to support:
+"        20<Enter> - to jump to line 20
+"       d20<Enter> - to delete from the current line until line 20
+"   <C-v>20<Enter> - to select from the current line until line 20
+nnoremap <Enter> G
+onoremap <Enter> G
+vnoremap <Enter> G
+
+" Easily change modes on keyboards that don't have CapsLock mapped to <Esc>
+inoremap jk      <ESC>
+
+" CRUD tabs.
+nnoremap <TAB>   :tabnext<CR>
+nnoremap <S-TAB> :tabprevious<CR>
+nnoremap <C-t>   :tabnew<CR>:edit .<CR>
+nnoremap <C-w>   :tabclose<CR>
+" TODO: Re-enable these once <M-{h,j,k,l}> are supported.
+" nnoremap <C-l> :+tabmove<CR>
+" nnoremap <C-h> :-tabmove<CR>
+
+" Use H,L to goto beggining,end of a line.
+" Swaps the keys to ensure original functionality of H,L are preserved.
+nnoremap H ^
+nnoremap L $
+nnoremap ^ H
+nnoremap $ L
+
+" Use H,L in visual mode too
+vnoremap H ^
+vnoremap L $
+vnoremap ^ H
+vnoremap $ L
+
+" Emacs hybrid mode
+" TODO: model this after tpope's rsi.vim (Readline-style insertion)
+cnoremap <C-g> <C-c>
+cnoremap <C-a> <C-b>
+inoremap <C-a> <C-o>^
+inoremap <C-e> <C-o>$
+inoremap <C-b> <C-o>h
+inoremap <C-f> <C-o>l
+
+" Indenting
+" The following three settings are based on option 2 of `:help tabstop`
+set tabstop=4
+set shiftwidth=4
+set expandtab
+set autoindent
diff --git a/configs/shared/.config/nvim/templates/boilerplate.c b/configs/shared/.config/nvim/templates/boilerplate.c
new file mode 100644
index 000000000000..949743d72587
--- /dev/null
+++ b/configs/shared/.config/nvim/templates/boilerplate.c
@@ -0,0 +1,6 @@
+#include <stdio.h>
+
+int main() {
+  printf("Hello, world!");
+  return 0;
+}
diff --git a/configs/shared/.config/nvim/templates/boilerplate.rs b/configs/shared/.config/nvim/templates/boilerplate.rs
new file mode 100644
index 000000000000..c83adbc69fa0
--- /dev/null
+++ b/configs/shared/.config/nvim/templates/boilerplate.rs
@@ -0,0 +1,5 @@
+fn main() {
+    // The statements here will be executed when the compiled binary is called.
+
+    println!("Hello, world!");
+}
diff --git a/configs/shared/.config/rofi/config b/configs/shared/.config/rofi/config
new file mode 100644
index 000000000000..576ab5cd8e68
--- /dev/null
+++ b/configs/shared/.config/rofi/config
@@ -0,0 +1,6 @@
+rofi.font:                           Monospace 10
+rofi.color-normal:                   #31213f, #8de0e1, #31213f, #83526a, #8de0e1
+rofi.color-urgent:                   #31213f, #d6b48d, #22231D, #d6b48d, #8de0e1
+rofi.color-active:                   #31213f, #3CC2B5, #31213f, #3CC2B5, #31213f
+rofi.color-window:                   #31213f, #83526a, #5a3849
+rofi.modi: window,run,ssh,combi
diff --git a/configs/shared/.config/rofi/config.bak b/configs/shared/.config/rofi/config.bak
new file mode 100644
index 000000000000..cd77833442f4
--- /dev/null
+++ b/configs/shared/.config/rofi/config.bak
@@ -0,0 +1,6 @@
+rofi.font:                           Source Code Pro 10
+rofi.color-normal:                   #01022E, #a7dff4, #01022E, #015f9e, #a7dff4
+rofi.color-urgent:                   #01022E, #d6b48d, #22231D, #d6b48d, #a7dff4
+rofi.color-active:                   #01022E, #3FA4E0, #01022E, #3FA4E0, #01022E
+rofi.color-window:                   #01022E, #015f9e, #01416c
+rofi.modi: window,run,ssh,combi
diff --git a/configs/shared/.config/systemd/user/clipmenud.service b/configs/shared/.config/systemd/user/clipmenud.service
new file mode 100644
index 000000000000..fac317f3f072
--- /dev/null
+++ b/configs/shared/.config/systemd/user/clipmenud.service
@@ -0,0 +1,18 @@
+[Unit]
+Description=Clipmenu daemon
+
+[Service]
+ExecStart=clipmenud
+Restart=always
+RestartSec=500ms
+Environment=DISPLAY=:0
+
+MemoryDenyWriteExecute=yes
+NoNewPrivileges=yes
+ProtectControlGroups=yes
+ProtectKernelTunables=yes
+RestrictAddressFamilies=
+RestrictRealtime=yes
+
+[Install]
+WantedBy=default.target
diff --git a/configs/shared/.config/systemd/user/default.target.wants/clipmenud.service b/configs/shared/.config/systemd/user/default.target.wants/clipmenud.service
new file mode 120000
index 000000000000..387f2023d2d2
--- /dev/null
+++ b/configs/shared/.config/systemd/user/default.target.wants/clipmenud.service
@@ -0,0 +1 @@
+/usr/local/google/home/wpcarro/.config/systemd/user/clipmenud.service
\ No newline at end of file
diff --git a/configs/shared/.config/terminator/config b/configs/shared/.config/terminator/config
new file mode 100644
index 000000000000..9357a7ed29f9
--- /dev/null
+++ b/configs/shared/.config/terminator/config
@@ -0,0 +1,34 @@
+[global_config]
+  enabled_plugins = LaunchpadBugURLHandler, LaunchpadCodeURLHandler, APTURLHandler, TerminatorThemes
+[keybindings]
+[profiles]
+  [[default]]
+    background_color = "#ffffff"
+    cursor_shape = ibeam
+    cursor_color = "#E29B61"
+    font = Input Mono Medium 12
+    foreground_color = "#000000"
+    show_titlebar = False
+    scrollbar_position = hidden
+    palette = "#31213f:#e29b61:#e8c35f:#565b87:#a56785:#20a89e:#3cc2b5:#8de0e1:#629c9d:#e29b61:#e8c35f:#565b87:#a56785:#20a89e:#3cc2b5:#8de0e1"
+    use_system_font = False
+  [[Molokai]]
+    background_color = "#121212"
+    cursor_shape = ibeam
+    cursor_color = "#bbbbbb"
+    font = Input Mono Medium 12
+    foreground_color = "#bbbbbb"
+    show_titlebar = False
+    scrollbar_position = hidden
+    palette = "#121212:#fa2573:#98e123:#dfd460:#1080d0:#8700ff:#43a8d0:#bbbbbb:#555555:#f6669d:#b1e05f:#fff26d:#00afff:#af87ff:#51ceff:#ffffff"
+    use_system_font = False
+[layouts]
+  [[default]]
+    [[[child1]]]
+      parent = window0
+      type = Terminal
+      profile = Molokai
+    [[[window0]]]
+      parent = ""
+      type = Window
+[plugins]
diff --git a/configs/shared/.config/terminator/config.bak b/configs/shared/.config/terminator/config.bak
new file mode 100644
index 000000000000..d25a89c99e60
--- /dev/null
+++ b/configs/shared/.config/terminator/config.bak
@@ -0,0 +1,23 @@
+[global_config]
+  enabled_plugins = LaunchpadBugURLHandler, LaunchpadCodeURLHandler, APTURLHandler
+[keybindings]
+[profiles]
+  [[default]]
+    background_color = "#01022E"
+    cursor_shape = ibeam
+    cursor_color = "#434AA6"
+    font = Source Code Pro 10
+    foreground_color = "#0278C6"
+    show_titlebar = False
+    scrollbar_position = hidden
+    palette = "#01022E:#434AA6:#0278C6:#9B6DB0:#018CD5:#07AAE9:#3FA4E0:#a7dff4:#749caa:#434AA6:#0278C6:#9B6DB0:#018CD5:#07AAE9:#3FA4E0:#a7dff4"
+    use_system_font = False
+[layouts]
+  [[default]]
+    [[[child1]]]
+      parent = window0
+      type = Terminal
+    [[[window0]]]
+      parent = ""
+      type = Window
+[plugins]
diff --git a/configs/shared/.config/terminator/plugins/terminator-themes.py b/configs/shared/.config/terminator/plugins/terminator-themes.py
new file mode 100644
index 000000000000..fa807c65bd2a
--- /dev/null
+++ b/configs/shared/.config/terminator/plugins/terminator-themes.py
@@ -0,0 +1,250 @@
+import requests
+import terminatorlib.plugin as plugin
+from gi.repository import Gtk
+from terminatorlib.config import ConfigBase
+from terminatorlib.translation import _
+from terminatorlib.util import get_config_dir, err, dbg, gerr
+
+AVAILABLE = ['TerminatorThemes']
+
+class TerminatorThemes(plugin.Plugin):
+
+    capabilities = ['terminal_menu']
+    config_base = ConfigBase()
+    base_url = 'https://api.github.com/repos/EliverLara/terminator-themes/contents/themes.json'
+    inherits_config_from = "default"
+
+    def callback(self, menuitems, menu, terminal):
+        """Add our item to the menu"""
+        self.terminal = terminal
+        item = Gtk.ImageMenuItem(Gtk.STOCK_FIND)
+        item.connect('activate',self.configure)
+        item.set_label("Themes")
+        item.set_sensitive(True)
+        menuitems.append(item)
+
+    def configure(self, widget, data = None):
+        ui = {}
+        dbox = Gtk.Dialog( _("Terminator themes"), None, Gtk.DialogFlags.MODAL)
+        
+        headers = { "Accept": "application/vnd.github.v3.raw" }
+        response = requests.get(self.base_url, headers=headers)
+
+        if response.status_code != 200:
+            gerr(_("Failed to get list of available themes"))
+            return
+        
+        self.themes_from_repo = response.json()["themes"]
+        self.profiles = self.terminal.config.list_profiles()
+
+        main_container = Gtk.HBox(spacing=5)
+        main_container.pack_start(self._create_themes_grid(ui), True, True, 0)
+        main_container.pack_start(self._create_settings_grid(ui), True, True, 0)
+        dbox.vbox.pack_start(main_container, True, True, 0)
+        
+        self.dbox = dbox
+        dbox.show_all()
+        res = dbox.run()
+
+        if res == Gtk.ResponseType.ACCEPT:
+            self.terminal.config.save()
+
+        del(self.dbox)
+        dbox.destroy()
+
+        return
+
+    def _create_themes_grid(self, ui):
+        grid = Gtk.Grid()
+        grid.set_column_spacing(5)
+        grid.set_row_spacing(7)
+        grid.set_column_homogeneous(True)
+        grid.set_row_homogeneous(True)
+
+        scroll_window = self._create_themes_list(ui)
+
+        #creating buttons to filter by theme type, and setting up their events
+        buttons = list()
+        for theme_type in ["light", "dark", "None"]:
+            button = Gtk.Button(theme_type)
+            buttons.append(button)
+            button.connect("clicked", self.on_filter_button_clicked)
+
+        grid.attach(scroll_window, 0, 0, 4, 10)
+        grid.attach_next_to(buttons[0], scroll_window, Gtk.PositionType.BOTTOM, 1, 1)
+
+        for i, button in enumerate(buttons[1:]):
+            grid.attach_next_to(button, buttons[i], Gtk.PositionType.RIGHT, 1, 1)
+
+        return grid
+
+    def _create_themes_list(self, ui):
+
+        profiles_list_model = Gtk.ListStore(str, str,bool, object)
+        # Set add/remove buttons availability
+        for theme in self.themes_from_repo:
+            if theme["name"] in self.profiles:
+                profiles_list_model.append([theme["name"], theme["type"],False, theme])
+            else:
+                profiles_list_model.append([theme["name"], theme["type"],True, theme])
+
+        self.current_filter_theme = None
+        self.theme_filter = profiles_list_model.filter_new()
+        self.theme_filter.set_visible_func(self.theme_filter_func)
+        
+        treeview = Gtk.TreeView.new_with_model(self.theme_filter)
+
+        selection = treeview.get_selection()
+        selection.set_mode(Gtk.SelectionMode.SINGLE)
+        selection.connect("changed", self.on_selection_changed, ui)
+        ui['treeview'] = treeview
+
+        for i, column_title in enumerate(["Theme", "Type"]):
+            renderer = Gtk.CellRendererText()
+            column = Gtk.TreeViewColumn(column_title, renderer, text=i)
+            treeview.append_column(column)
+
+        scroll_window = Gtk.ScrolledWindow()
+        scroll_window.set_policy(Gtk.PolicyType.AUTOMATIC, Gtk.PolicyType.AUTOMATIC)
+        scroll_window.add(treeview)
+
+        return scroll_window
+
+
+    def _create_settings_grid(self, ui):
+        grid = Gtk.Grid()
+        grid.set_column_spacing(5)
+        grid.set_row_spacing(7)
+        grid.attach(self._create_default_inherits_check(ui), 0, 0, 2, 1)
+        grid.attach(Gtk.Label("Available profiles: "), 0, 1, 1, 1)
+        grid.attach(self._create_inherits_from_combo(ui), 1, 1, 1, 1)
+        grid.attach(self._create_main_action_button(ui, "install", self.on_install), 0, 4, 1, 1)
+        grid.attach(self._create_main_action_button(ui, "remove", self.on_uninstall), 1, 4, 1, 1)
+
+        return grid
+
+    def _create_default_inherits_check(self, ui):
+        check = Gtk.CheckButton("Inherit preferences from default profile")
+        check.set_active(True)
+        check.connect("toggled", self.on_inheritsfromdefaultcheck_toggled, ui)
+        ui['check_inherits_from_default'] = check
+        
+        return check
+
+    def _create_inherits_from_combo(self, ui):
+        combo = Gtk.ComboBoxText()
+        combo.set_entry_text_column(0)
+        combo.set_sensitive(False)
+        combo.connect("changed", self.on_inheritsfromcombo_changed, ui)
+        ui['inherits_from_combo'] = combo
+
+        for profile in self.profiles:
+            combo.append_text(profile)
+
+        combo.set_active(self.profiles.index(self.terminal.config.get_profile()))
+
+        return combo
+    
+    def _create_main_action_button(self, ui, label, action):
+        btn = Gtk.Button(_(label.capitalize()))
+        btn.connect("clicked", action, ui) 
+        btn.set_sensitive(False)
+        ui['button_' + label] = btn
+
+        return btn
+
+    def theme_filter_func(self, model, iter, data):
+        """Tests if the theme in the row is the one in the filter"""
+        if self.current_filter_theme is None or self.current_filter_theme == "None":
+            return True
+        else:
+            return model[iter][1] == self.current_filter_theme
+
+    def on_filter_button_clicked(self, widget):
+        """Called on any of the button clicks"""
+        #we set the current theme filter to the button's label
+        self.current_filter_theme = widget.get_label()
+
+        #we update the filter, which updates in turn the view
+        self.theme_filter.refilter()
+
+
+    def  on_inheritsfromdefaultcheck_toggled(self, check, data=None):
+        if check.get_active() is not True:
+            data["inherits_from_combo"].set_sensitive(True)
+            self.inherits_config_from = self.profiles[data['inherits_from_combo'].get_active()]
+        else:
+            data["inherits_from_combo"].set_sensitive(False)
+            self.inherits_config_from = 'default'
+        
+    def  on_inheritsfromcombo_changed(self, combo, data):
+        if combo.get_sensitive():    
+            self.inherits_config_from = self.profiles[combo.get_active()]
+        else:
+            self.inherits_config_from = 'default'
+
+    def on_selection_changed(self, selection, data=None):
+        (model, iter) = selection.get_selected()
+        data['button_install'].set_sensitive(model[iter][2])
+        data['button_remove'].set_sensitive(model[iter][2] is not True)
+
+    def on_uninstall(self, button, data):
+        treeview = data['treeview']
+        selection = treeview.get_selection()
+        (store, iter) = selection.get_selected()
+        target = store[iter][0]
+
+        # If selected theme is active, sets terminal profile to default before unistalling
+        if self.terminal.get_profile() == target:
+            widget = self.terminal.get_vte()
+            self.terminal.force_set_profile(widget, 'default')
+
+        self.terminal.config.del_profile(target)
+        self.terminal.config.save()
+        self.update_comboInheritsFrom(data)
+
+        #'Add' button available again
+        data['treeview'].get_model().set_value(iter, 2, True)
+        self.on_selection_changed(selection, data)
+
+    def on_install(self, button, data):
+        treeview = data['treeview']
+        selection = treeview.get_selection()
+        (store, iter) = selection.get_selected()
+        target = store[iter][3]
+        widget = self.terminal.get_vte()
+        treeview.set_enable_tree_lines(False)
+        
+        if not iter:
+            return
+
+        self.terminal.config.add_profile(target["name"]) 
+        template_data = self.config_base.profiles[self.inherits_config_from].copy()
+
+        for k, v in target.items():
+            if k != 'background_image' and k != 'name' and k != 'type':
+                if k == 'background_darkness':
+                    template_data[k] = float(v)
+                else:
+                    template_data[k] = v
+
+        for k, v in template_data.items():
+            self.config_base.set_item(k, v, target["name"])
+                 
+        self.terminal.force_set_profile(widget, target["name"])
+        self.terminal.config.save()
+        self.update_comboInheritsFrom(data)
+
+        # "Remove" button available again
+        data['treeview'].get_model().set_value(iter, 2, False)
+        self.on_selection_changed(selection, data)
+        treeview.set_enable_tree_lines(True)
+
+    def update_comboInheritsFrom(self, data):
+        data['inherits_from_combo'].remove_all()
+        profiles = self.terminal.config.list_profiles()
+        self.profiles = profiles
+        for profile in profiles:
+            data['inherits_from_combo'].append_text(profile)
+
+        data['inherits_from_combo'].set_active(profiles.index(self.terminal.config.get_profile()))
\ No newline at end of file