use pin_project_lite::pin_project;
use std::task::{ready, Poll};
use tokio::io::AsyncWrite;
use super::{padding_len, EMPTY_BYTES, LEN_SIZE};
pin_project! {
/// Writes a "bytes wire packet" to the underlying writer.
/// The format is the same as in [crate::wire::bytes::write_bytes],
/// however this structure provides a [AsyncWrite] interface,
/// allowing to not having to pass around the entire payload in memory.
///
/// It internally takes care of writing (non-payload) framing (size and
/// padding).
///
/// During construction, the expected payload size needs to be provided.
///
/// After writing the payload to it, the user MUST call flush (or shutdown),
/// which will validate the written payload size to match, and write the
/// necessary padding.
///
/// In case flush is not called at the end, invalid data might be sent
/// silently.
///
/// The underlying writer returning `Ok(0)` is considered an EOF situation,
/// which is stronger than the "typically means the underlying object is no
/// longer able to accept bytes" interpretation from the docs. If such a
/// situation occurs, an error is returned.
///
/// The struct holds three fields, the underlying writer, the (expected)
/// payload length, and an enum, tracking the state.
pub struct BytesWriter<W>
where
W: AsyncWrite,
{
#[pin]
inner: W,
payload_len: u64,
state: BytesPacketPosition,
}
}
/// Models the position inside a "bytes wire packet" that the writer is in.
/// It can be in three different stages, inside size, payload or padding fields.
/// The number tracks the number of bytes written inside the specific field.
/// There shall be no ambiguous states, at the end of a stage we immediately
/// move to the beginning of the next one:
/// - Size(LEN_SIZE) must be expressed as Payload(0)
/// - Payload(self.payload_len) must be expressed as Padding(0)
///
/// Padding(padding_len) means we're at the end of the bytes wire packet.
#[derive(Clone, Debug, PartialEq, Eq)]
enum BytesPacketPosition {
Size(usize),
Payload(u64),
Padding(usize),
}
impl<W> BytesWriter<W>
where
W: AsyncWrite,
{
/// Constructs a new BytesWriter, using the underlying passed writer.
pub fn new(w: W, payload_len: u64) -> Self {
Self {
inner: w,
payload_len,
state: BytesPacketPosition::Size(0),
}
}
}
/// Returns an error if the passed usize is 0.
#[inline]
fn ensure_nonzero_bytes_written(bytes_written: usize) -> Result<usize, std::io::Error> {
if bytes_written == 0 {
Err(std::io::Error::new(
std::io::ErrorKind::WriteZero,
"underlying writer accepted 0 bytes",
))
} else {
Ok(bytes_written)
}
}
impl<W> AsyncWrite for BytesWriter<W>
where
W: AsyncWrite,
{
fn poll_write(
self: std::pin::Pin<&mut Self>,
cx: &mut std::task::Context<'_>,
buf: &[u8],
) -> Poll<Result<usize, std::io::Error>> {
// Use a loop, so we can deal with (multiple) state transitions.
let mut this = self.project();
loop {
match *this.state {
BytesPacketPosition::Size(LEN_SIZE) => unreachable!(),
BytesPacketPosition::Size(pos) => {
let size_field = &this.payload_len.to_le_bytes();
let bytes_written = ensure_nonzero_bytes_written(ready!(this
.inner
.as_mut()
.poll_write(cx, &size_field[pos..]))?)?;
let new_pos = pos + bytes_written;
if new_pos == LEN_SIZE {
*this.state = BytesPacketPosition::Payload(0);
} else {
*this.state = BytesPacketPosition::Size(new_pos);
}
}
BytesPacketPosition::Payload(pos) => {
// Ensure we still have space for more payload
if pos + (buf.len() as u64) > *this.payload_len {
return Poll::Ready(Err(std::io::Error::new(
std::io::ErrorKind::InvalidData,
"tried to write excess bytes",
)));
}
let bytes_written = ready!(this.inner.as_mut().poll_write(cx, buf))?;
ensure_nonzero_bytes_written(bytes_written)?;
let new_pos = pos + (bytes_written as u64);
if new_pos == *this.payload_len {
*this.state = BytesPacketPosition::Padding(0)
} else {
*this.state = BytesPacketPosition::Payload(new_pos)
}
return Poll::Ready(Ok(bytes_written));
}
// If we're already in padding state, there should be no more payload left to write!
BytesPacketPosition::Padding(_pos) => {
return Poll::Ready(Err(std::io::Error::new(
std::io::ErrorKind::InvalidData,
"tried to write excess bytes",
)))
}
}
}
}
fn poll_flush(
self: std::pin::Pin<&mut Self>,
cx: &mut std::task::Context<'_>,
) -> Poll<Result<(), std::io::Error>> {
let mut this = self.project();
loop {
match *this.state {
BytesPacketPosition::Size(LEN_SIZE) => unreachable!(),
BytesPacketPosition::Size(pos) => {
// More bytes to write in the size field
let size_field = &this.payload_len.to_le_bytes()[..];
let bytes_written = ensure_nonzero_bytes_written(ready!(this
.inner
.as_mut()
.poll_write(cx, &size_field[pos..]))?)?;
let new_pos = pos + bytes_written;
if new_pos == LEN_SIZE {
// Size field written, now ready to receive payload
*this.state = BytesPacketPosition::Payload(0);
} else {
*this.state = BytesPacketPosition::Size(new_pos);
}
}
BytesPacketPosition::Payload(_pos) => {
// If we're at position 0 and want to write 0 bytes of payload
// in total, we can transition to padding.
// Otherwise, break, as we're expecting more payload to
// be written.
if *this.payload_len == 0 {
*this.state = BytesPacketPosition::Padding(0);
} else {
break;
}
}
BytesPacketPosition::Padding(pos) => {
// Write remaining padding, if there is padding to write.
let total_padding_len = padding_len(*this.payload_len) as usize;
if pos != total_padding_len {
let bytes_written = ensure_nonzero_bytes_written(ready!(this
.inner
.as_mut()
.poll_write(cx, &EMPTY_BYTES[pos..total_padding_len]))?)?;
*this.state = BytesPacketPosition::Padding(pos + bytes_written);
} else {
// everything written, break
break;
}
}
}
}
// Flush the underlying writer.
this.inner.as_mut().poll_flush(cx)
}
fn poll_shutdown(
mut self: std::pin::Pin<&mut Self>,
cx: &mut std::task::Context<'_>,
) -> Poll<Result<(), std::io::Error>> {
// Call flush.
ready!(self.as_mut().poll_flush(cx))?;
let this = self.project();
// After a flush, being inside the padding state, and at the end of the padding
// is the only way to prevent a dirty shutdown.
if let BytesPacketPosition::Padding(pos) = *this.state {
let padding_len = padding_len(*this.payload_len) as usize;
if padding_len == pos {
// Shutdown the underlying writer
return this.inner.poll_shutdown(cx);
}
}
// Shutdown the underlying writer, bubbling up any errors.
ready!(this.inner.poll_shutdown(cx))?;
// return an error about unclean shutdown
Poll::Ready(Err(std::io::Error::new(
std::io::ErrorKind::BrokenPipe,
"unclean shutdown",
)))
}
}
#[cfg(test)]
mod tests {
use std::sync::LazyLock;
use std::time::Duration;
use crate::wire::bytes::write_bytes;
use hex_literal::hex;
use tokio::io::AsyncWriteExt;
use tokio_test::{assert_err, assert_ok, io::Builder};
use super::*;
pub static LARGE_PAYLOAD: LazyLock<Vec<u8>> =
LazyLock::new(|| (0..255).collect::<Vec<u8>>().repeat(4 * 1024));
/// Helper function, calling the (simpler) write_bytes with the payload.
/// We use this to create data we want to see on the wire.
async fn produce_exp_bytes(payload: &[u8]) -> Vec<u8> {
let mut exp = vec![];
write_bytes(&mut exp, payload).await.unwrap();
exp
}
/// Write an empty bytes packet.
#[tokio::test]
async fn write_empty() {
let payload = &[];
let mut mock = Builder::new()
.write(&produce_exp_bytes(payload).await)
.build();
let mut w = BytesWriter::new(&mut mock, 0);
assert_ok!(w.write_all(&[]).await, "write all data");
assert_ok!(w.flush().await, "flush");
}
/// Write an empty bytes packet, not calling write.
#[tokio::test]
async fn write_empty_only_flush() {
let payload = &[];
let mut mock = Builder::new()
.write(&produce_exp_bytes(payload).await)
.build();
let mut w = BytesWriter::new(&mut mock, 0);
assert_ok!(w.flush().await, "flush");
}
/// Write an empty bytes packet, not calling write or flush, only shutdown.
#[tokio::test]
async fn write_empty_only_shutdown() {
let payload = &[];
let mut mock = Builder::new()
.write(&produce_exp_bytes(payload).await)
.build();
let mut w = BytesWriter::new(&mut mock, 0);
assert_ok!(w.shutdown().await, "shutdown");
}
/// Write a 1 bytes packet
#[tokio::test]
async fn write_1b() {
let payload = &[0xff];
let mut mock = Builder::new()
.write(&produce_exp_bytes(payload).await)
.build();
let mut w = BytesWriter::new(&mut mock, payload.len() as u64);
assert_ok!(w.write_all(payload).await);
assert_ok!(w.flush().await, "flush");
}
/// Write a 8 bytes payload (no padding)
#[tokio::test]
async fn write_8b() {
let payload = &hex!("0001020304050607");
let mut mock = Builder::new()
.write(&produce_exp_bytes(payload).await)
.build();
let mut w = BytesWriter::new(&mut mock, payload.len() as u64);
assert_ok!(w.write_all(payload).await);
assert_ok!(w.flush().await, "flush");
}
/// Write a 9 bytes payload (7 bytes padding)
#[tokio::test]
async fn write_9b() {
let payload = &hex!("000102030405060708");
let mut mock = Builder::new()
.write(&produce_exp_bytes(payload).await)
.build();
let mut w = BytesWriter::new(&mut mock, payload.len() as u64);
assert_ok!(w.write_all(payload).await);
assert_ok!(w.flush().await, "flush");
}
/// Write a 9 bytes packet very granularly, with a lot of flushing in between,
/// and a shutdown at the end.
#[tokio::test]
async fn write_9b_flush() {
let payload = &hex!("000102030405060708");
let exp_bytes = produce_exp_bytes(payload).await;
let mut mock = Builder::new().write(&exp_bytes).build();
let mut w = BytesWriter::new(&mut mock, payload.len() as u64);
assert_ok!(w.flush().await);
assert_ok!(w.write_all(&payload[..4]).await);
assert_ok!(w.flush().await);
// empty write, cause why not
assert_ok!(w.write_all(&[]).await);
assert_ok!(w.flush().await);
assert_ok!(w.write_all(&payload[4..]).await);
assert_ok!(w.flush().await);
assert_ok!(w.shutdown().await);
}
/// Write a 9 bytes packet, but cause the sink to only accept half of the
/// padding, ensuring we correctly write (only) the rest of the padding later.
/// We write another 2 bytes of "bait", where a faulty implementation (pre
/// cl/11384) would put too many null bytes.
#[tokio::test]
async fn write_9b_write_padding_2steps() {
let payload = &hex!("000102030405060708");
let exp_bytes = produce_exp_bytes(payload).await;
let mut mock = Builder::new()
.write(&exp_bytes[0..8]) // size
.write(&exp_bytes[8..17]) // payload
.write(&exp_bytes[17..19]) // padding (2 of 7 bytes)
// insert a wait to prevent Mock from merging the two writes into one
.wait(Duration::from_nanos(1))
.write(&hex!("0000000000ffff")) // padding (5 of 7 bytes, plus 2 bytes of "bait")
.build();
let mut w = BytesWriter::new(&mut mock, payload.len() as u64);
assert_ok!(w.write_all(&payload[..]).await);
assert_ok!(w.flush().await);
// Write bait
assert_ok!(mock.write_all(&hex!("ffff")).await);
}
/// Write a larger bytes packet
#[tokio::test]
async fn write_1m() {
let payload = LARGE_PAYLOAD.as_slice();
let exp_bytes = produce_exp_bytes(payload).await;
let mut mock = Builder::new().write(&exp_bytes).build();
let mut w = BytesWriter::new(&mut mock, payload.len() as u64);
assert_ok!(w.write_all(payload).await);
assert_ok!(w.flush().await, "flush");
}
/// Not calling flush at the end, but shutdown is also ok if we wrote all
/// bytes we promised to write (as shutdown implies flush)
#[tokio::test]
async fn write_shutdown_without_flush_end() {
let payload = &[0xf0, 0xff];
let exp_bytes = produce_exp_bytes(payload).await;
let mut mock = Builder::new().write(&exp_bytes).build();
let mut w = BytesWriter::new(&mut mock, payload.len() as u64);
// call flush to write the size field
assert_ok!(w.flush().await);
// write payload
assert_ok!(w.write_all(payload).await);
// call shutdown
assert_ok!(w.shutdown().await);
}
/// Writing more bytes than previously signalled should fail.
#[tokio::test]
async fn write_more_than_signalled_fail() {
let mut buf = Vec::new();
let mut w = BytesWriter::new(&mut buf, 2);
assert_err!(w.write_all(&hex!("000102")).await);
}
/// Writing more bytes than previously signalled, but in two parts
#[tokio::test]
async fn write_more_than_signalled_split_fail() {
let mut buf = Vec::new();
let mut w = BytesWriter::new(&mut buf, 2);
// write two bytes
assert_ok!(w.write_all(&hex!("0001")).await);
// write the excess byte.
assert_err!(w.write_all(&hex!("02")).await);
}
/// Writing more bytes than previously signalled, but flushing after the
/// signalled amount should fail.
#[tokio::test]
async fn write_more_than_signalled_flush_fail() {
let mut buf = Vec::new();
let mut w = BytesWriter::new(&mut buf, 2);
// write two bytes, then flush
assert_ok!(w.write_all(&hex!("0001")).await);
assert_ok!(w.flush().await);
// write the excess byte.
assert_err!(w.write_all(&hex!("02")).await);
}
/// Calling shutdown while not having written all bytes that were promised
/// returns an error.
/// Note there's still cases of silent corruption if the user doesn't call
/// shutdown explicitly (only drops).
#[tokio::test]
async fn premature_shutdown() {
let payload = &[0xf0, 0xff];
let mut buf = Vec::new();
let mut w = BytesWriter::new(&mut buf, payload.len() as u64);
// call flush to write the size field
assert_ok!(w.flush().await);
// write half of the payload (!)
assert_ok!(w.write_all(&payload[0..1]).await);
// call shutdown, ensure it fails
assert_err!(w.shutdown().await);
}
/// Write to a Writer that fails to write during the size packet (after 4 bytes).
/// Ensure this error gets propagated on the first call to write.
#[tokio::test]
async fn inner_writer_fail_during_size_firstwrite() {
let payload = &[0xf0];
let mut mock = Builder::new()
.write(&1u32.to_le_bytes())
.write_error(std::io::Error::new(std::io::ErrorKind::Other, "๐ฟ"))
.build();
let mut w = BytesWriter::new(&mut mock, payload.len() as u64);
assert_err!(w.write_all(payload).await);
}
/// Write to a Writer that fails to write during the size packet (after 4 bytes).
/// Ensure this error gets propagated during an initial flush
#[tokio::test]
async fn inner_writer_fail_during_size_initial_flush() {
let payload = &[0xf0];
let mut mock = Builder::new()
.write(&1u32.to_le_bytes())
.write_error(std::io::Error::new(std::io::ErrorKind::Other, "๐ฟ"))
.build();
let mut w = BytesWriter::new(&mut mock, payload.len() as u64);
assert_err!(w.flush().await);
}
/// Write to a writer that fails to write during the payload (after 9 bytes).
/// Ensure this error gets propagated when we're writing this byte.
#[tokio::test]
async fn inner_writer_fail_during_write() {
let payload = &hex!("f0ff");
let mut mock = Builder::new()
.write(&2u64.to_le_bytes())
.write(&hex!("f0"))
.write_error(std::io::Error::new(std::io::ErrorKind::Other, "๐ฟ"))
.build();
let mut w = BytesWriter::new(&mut mock, payload.len() as u64);
assert_ok!(w.write(&hex!("f0")).await);
assert_err!(w.write(&hex!("ff")).await);
}
/// Write to a writer that fails to write during the padding (after 10 bytes).
/// Ensure this error gets propagated during a flush.
#[tokio::test]
async fn inner_writer_fail_during_padding_flush() {
let payload = &hex!("f0");
let mut mock = Builder::new()
.write(&1u64.to_le_bytes())
.write(&hex!("f0"))
.write(&hex!("00"))
.write_error(std::io::Error::new(std::io::ErrorKind::Other, "๐ฟ"))
.build();
let mut w = BytesWriter::new(&mut mock, payload.len() as u64);
assert_ok!(w.write(&hex!("f0")).await);
assert_err!(w.flush().await);
}
}
