git-ls-files(1)
===============

NAME
----
git-ls-files - Show information about files in the index and the working tree


SYNOPSIS
--------
[verse]
'git ls-files' [-z] [-t] [-v] [-f]
		(--[cached|deleted|others|ignored|stage|unmerged|killed|modified])*
		(-[c|d|o|i|s|u|k|m])*
		[--eol]
		[-x <pattern>|--exclude=<pattern>]
		[-X <file>|--exclude-from=<file>]
		[--exclude-per-directory=<file>]
		[--exclude-standard]
		[--error-unmatch] [--with-tree=<tree-ish>]
		[--full-name] [--recurse-submodules]
		[--abbrev] [--] [<file>...]

DESCRIPTION
-----------
This merges the file listing in the directory cache index with the
actual working directory list, and shows different combinations of the
two.

One or more of the options below may be used to determine the files
shown:

OPTIONS
-------
-c::
--cached::
	Show cached files in the output (default)

-d::
--deleted::
	Show deleted files in the output

-m::
--modified::
	Show modified files in the output

-o::
--others::
	Show other (i.e. untracked) files in the output

-i::
--ignored::
	Show only ignored files in the output. When showing files in the
	index, print only those matched by an exclude pattern. When
	showing "other" files, show only those matched by an exclude
	pattern. Standard ignore rules are not automatically activated,
	therefore at least one of the `--exclude*` options is required.

-s::
--stage::
	Show staged contents' mode bits, object name and stage number in the output.

--directory::
	If a whole directory is classified as "other", show just its
	name (with a trailing slash) and not its whole contents.

--no-empty-directory::
	Do not list empty directories. Has no effect without --directory.

-u::
--unmerged::
	Show unmerged files in the output (forces --stage)

-k::
--killed::
	Show files on the filesystem that need to be removed due
	to file/directory conflicts for checkout-index to
	succeed.

-z::
	\0 line termination on output and do not quote filenames.
	See OUTPUT below for more information.

-x <pattern>::
--exclude=<pattern>::
	Skip untracked files matching pattern.
	Note that pattern is a shell wildcard pattern. See EXCLUDE PATTERNS
	below for more information.

-X <file>::
--exclude-from=<file>::
	Read exclude patterns from <file>; 1 per line.

--exclude-per-directory=<file>::
	Read additional exclude patterns that apply only to the
	directory and its subdirectories in <file>.

--exclude-standard::
	Add the standard Git exclusions: .git/info/exclude, .gitignore
	in each directory, and the user's global exclusion file.

--error-unmatch::
	If any <file> does not appear in the index, treat this as an
	error (return 1).

--with-tree=<tree-ish>::
	When using --error-unmatch to expand the user supplied
	<file> (i.e. path pattern) arguments to paths, pretend
	that paths which were removed in the index since the
	named <tree-ish> are still present.  Using this option
	with `-s` or `-u` options does not make any sense.

-t::
	This feature is semi-deprecated. For scripting purpose,
	linkgit:git-status[1] `--porcelain` and
	linkgit:git-diff-files[1] `--name-status` are almost always
	superior alternatives, and users should look at
	linkgit:git-status[1] `--short` or linkgit:git-diff[1]
	`--name-status` for more user-friendly alternatives.
+
--
This option identifies the file status with the following tags (followed by
a space) at the start of each line:

	H::	cached
	S::	skip-worktree
	M::	unmerged
	R::	removed/deleted
	C::	modified/changed
	K::	to be killed
	?::	other
--

-v::
	Similar to `-t`, but use lowercase letters for files
	that are marked as 'assume unchanged' (see
	linkgit:git-update-index[1]).

-f::
	Similar to `-t`, but use lowercase letters for files
	that are marked as 'fsmonitor valid' (see
	linkgit:git-update-index[1]).

--full-name::
	When run from a subdirectory, the command usually
	outputs paths relative to the current directory.  This
	option forces paths to be output relative to the project
	top directory.

--recurse-submodules::
	Recursively calls ls-files on each active submodule in the repository.
	Currently there is only support for the --cached mode.

--abbrev[=<n>]::
	Instead of showing the full 40-byte hexadecimal object
	lines, show only a partial prefix.
	Non default number of digits can be specified with --abbrev=<n>.

--debug::
	After each line that describes a file, add more data about its
	cache entry.  This is intended to show as much information as
	possible for manual inspection; the exact format may change at
	any time.

--eol::
	Show <eolinfo> and <eolattr> of files.
	<eolinfo> is the file content identification used by Git when
	the "text" attribute is "auto" (or not set and core.autocrlf is not false).
	<eolinfo> is either "-text", "none", "lf", "crlf", "mixed" or "".
+
"" means the file is not a regular file, it is not in the index or
not accessible in the working tree.
+
<eolattr> is the attribute that is used when checking out or committing,
it is either "", "-text", "text", "text=auto", "text eol=lf", "text eol=crlf".
Since Git 2.10 "text=auto eol=lf" and "text=auto eol=crlf" are supported.
+
Both the <eolinfo> in the index ("i/<eolinfo>")
and in the working tree ("w/<eolinfo>") are shown for regular files,
followed by the  ("attr/<eolattr>").

\--::
	Do not interpret any more arguments as options.

<file>::
	Files to show. If no files are given all files which match the other
	specified criteria are shown.

OUTPUT
------
'git ls-files' just outputs the filenames unless `--stage` is specified in
which case it outputs:

        [<tag> ]<mode> <object> <stage> <file>

'git ls-files --eol' will show
	i/<eolinfo><SPACES>w/<eolinfo><SPACES>attr/<eolattr><SPACE*><TAB><file>

'git ls-files --unmerged' and 'git ls-files --stage' can be used to examine
detailed information on unmerged paths.

For an unmerged path, instead of recording a single mode/SHA-1 pair,
the index records up to three such pairs; one from tree O in stage
1, A in stage 2, and B in stage 3.  This information can be used by
the user (or the porcelain) to see what should eventually be recorded at the
path. (see linkgit:git-read-tree[1] for more information on state)

Without the `-z` option, pathnames with "unusual" characters are
quoted as explained for the configuration variable `core.quotePath`
(see linkgit:git-config[1]).  Using `-z` the filename is output
verbatim and the line is terminated by a NUL byte.


EXCLUDE PATTERNS
----------------

'git ls-files' can use a list of "exclude patterns" when
traversing the directory tree and finding files to show when the
flags --others or --ignored are specified.  linkgit:gitignore[5]
specifies the format of exclude patterns.

These exclude patterns come from these places, in order:

  1. The command-line flag --exclude=<pattern> specifies a
     single pattern.  Patterns are ordered in the same order
     they appear in the command line.

  2. The command-line flag --exclude-from=<file> specifies a
     file containing a list of patterns.  Patterns are ordered
     in the same order they appear in the file.

  3. The command-line flag --exclude-per-directory=<name> specifies
     a name of the file in each directory 'git ls-files'
     examines, normally `.gitignore`.  Files in deeper
     directories take precedence.  Patterns are ordered in the
     same order they appear in the files.

A pattern specified on the command line with --exclude or read
from the file specified with --exclude-from is relative to the
top of the directory tree.  A pattern read from a file specified
by --exclude-per-directory is relative to the directory that the
pattern file appears in.

SEE ALSO
--------
linkgit:git-read-tree[1], linkgit:gitignore[5]

GIT
---
Part of the linkgit:git[1] suite