From d01d6bb63db9da000dd1b3c8491a6c0d43877c29 Mon Sep 17 00:00:00 2001 From: Vincent Ambo Date: Wed, 24 Mar 2021 02:14:00 +0200 Subject: chore(3p): Clean up unused third-party packages Removes the following currently unused packages: * terraform-gcp * cpp.googleapis * nixery Change-Id: I02c38f0e6d23b1b9008706ca5a3b9db51cc9b689 Reviewed-on: https://cl.tvl.fyi/c/depot/+/2650 Tested-by: BuildkiteCI Reviewed-by: sterni Reviewed-by: glittershark --- .../ci/kokoro/install/Dockerfile.centos-7 | 105 ------------------- .../ci/kokoro/install/Dockerfile.fedora-30 | 58 ----------- .../ci/kokoro/install/Dockerfile.fedora-30-shared | 62 ----------- .../ci/kokoro/install/Dockerfile.opensuse-leap | 114 --------------------- .../kokoro/install/Dockerfile.opensuse-tumbleweed | 54 ---------- .../ci/kokoro/install/Dockerfile.ubuntu-16.04 | 100 ------------------ .../ci/kokoro/install/Dockerfile.ubuntu-18.04 | 84 --------------- .../cpp/googleapis/ci/kokoro/install/build.sh | 106 ------------------- .../ci/kokoro/install/centos-7-presubmit.cfg | 0 .../cpp/googleapis/ci/kokoro/install/centos-7.cfg | 0 .../cpp/googleapis/ci/kokoro/install/common.cfg | 17 --- .../ci/kokoro/install/fedora-30-presubmit.cfg | 0 .../kokoro/install/fedora-30-shared-presubmit.cfg | 0 .../ci/kokoro/install/fedora-30-shared.cfg | 0 .../cpp/googleapis/ci/kokoro/install/fedora-30.cfg | 0 .../ci/kokoro/install/opensuse-leap-presubmit.cfg | 0 .../googleapis/ci/kokoro/install/opensuse-leap.cfg | 0 .../install/opensuse-tumbleweed-presubmit.cfg | 0 .../ci/kokoro/install/opensuse-tumbleweed.cfg | 0 .../ci/kokoro/install/ubuntu-16.04-presubmit.cfg | 0 .../googleapis/ci/kokoro/install/ubuntu-16.04.cfg | 0 .../ci/kokoro/install/ubuntu-18.04-presubmit.cfg | 0 .../googleapis/ci/kokoro/install/ubuntu-18.04.cfg | 0 23 files changed, 700 deletions(-) delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.centos-7 delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30 delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30-shared delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-leap delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-tumbleweed delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-16.04 delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-18.04 delete mode 100755 third_party/cpp/googleapis/ci/kokoro/install/build.sh delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/centos-7-presubmit.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/centos-7.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/common.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/fedora-30-presubmit.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared-presubmit.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/fedora-30.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap-presubmit.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed-presubmit.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04-presubmit.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04-presubmit.cfg delete mode 100644 third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04.cfg (limited to 'third_party/cpp/googleapis/ci/kokoro/install') diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.centos-7 b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.centos-7 deleted file mode 100644 index 21b8908134d4..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.centos-7 +++ /dev/null @@ -1,105 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM centos:7 AS devtools - -# Please keep the formatting in these commands, it is optimized to cut & paste -# into the INSTALL.md file. - -## [START INSTALL.md] - -# First install the development tools and OpenSSL. The development tools -# distributed with CentOS (notably CMake) are too old to build -# `cpp-cmakefiles`. In these instructions, we use `cmake3` obtained from -# [Software Collections](https://www.softwarecollections.org/). - -# ```bash -RUN rpm -Uvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm -RUN yum install -y centos-release-scl -RUN yum-config-manager --enable rhel-server-rhscl-7-rpms -RUN yum makecache && \ - yum install -y automake cmake3 curl-devel gcc gcc-c++ git libtool \ - make openssl-devel pkgconfig tar wget which zlib-devel -RUN ln -sf /usr/bin/cmake3 /usr/bin/cmake && ln -sf /usr/bin/ctest3 /usr/bin/ctest -# ``` - -# #### Protobuf - -# Likewise, manually install protobuf: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/google/protobuf/archive/v3.9.0.tar.gz -RUN tar -xf v3.9.0.tar.gz -WORKDIR /var/tmp/build/protobuf-3.9.0/cmake -RUN cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DBUILD_SHARED_LIBS=yes \ - -Dprotobuf_BUILD_TESTS=OFF \ - -H. -Bcmake-out -RUN cmake --build cmake-out --target install -- -j $(nproc) -RUN ldconfig -# ``` - -# #### c-ares - -# Recent versions of gRPC require c-ares >= 1.11, while CentOS-7 -# distributes c-ares-1.10. Manually install a newer version: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/c-ares/c-ares/archive/cares-1_15_0.tar.gz -RUN tar -xf cares-1_15_0.tar.gz -WORKDIR /var/tmp/build/c-ares-cares-1_15_0 -RUN ./buildconf && ./configure && make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -# #### gRPC - -# Can be manually installed using: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/grpc/grpc/archive/v1.22.0.tar.gz -RUN tar -xf v1.22.0.tar.gz -WORKDIR /var/tmp/build/grpc-1.22.0 -ENV PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/local/lib64/pkgconfig -ENV LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64 -ENV PATH=/usr/local/bin:${PATH} -RUN make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -FROM devtools AS install - -# #### googleapis - -# Finally we can install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30 b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30 deleted file mode 100644 index d6e57b91e232..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30 +++ /dev/null @@ -1,58 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM fedora:30 AS devtools - -# Please keep the formatting below, it is used by `extract-install.md` -# to generate the contents of the top-level INSTALL.md. - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN dnf makecache && \ - dnf install -y cmake gcc-c++ git make openssl-devel pkgconfig \ - zlib-devel -# ``` - -# Fedora includes packages for gRPC, libcurl, and OpenSSL that are recent enough -# for `cpp-cmakefiles`. Install these packages and additional development -# tools to compile the dependencies: - -# ```bash -RUN dnf makecache && \ - dnf install -y grpc-devel grpc-plugins \ - libcurl-devel protobuf-compiler tar wget zlib-devel -# ``` - -FROM devtools AS install - -# #### googleapis - -# We can now compile and install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30-shared b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30-shared deleted file mode 100644 index 572018f994dc..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.fedora-30-shared +++ /dev/null @@ -1,62 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM fedora:30 AS devtools - -# Please keep the formatting below, it is used by `extract-install.md` -# to generate the contents of the top-level INSTALL.md. - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN dnf makecache && \ - dnf install -y cmake gcc-c++ git make openssl-devel pkgconfig \ - zlib-devel -# ``` - -# Fedora includes packages for gRPC, libcurl, and OpenSSL that are recent enough -# for `cpp-cmakefiles`. Install these packages and additional development -# tools to compile the dependencies: - -# ```bash -RUN dnf makecache && \ - dnf install -y grpc-devel grpc-plugins \ - libcurl-devel protobuf-compiler tar wget zlib-devel -# ``` - -FROM devtools AS install - -# #### googleapis - -# We can now compile and install `googleapis` as shared library. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -DBUILD_SHARED_LIBS=yes -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# The share libraries will install in `/usr/local/lib64` we need that directory -# in the ld.so cache: -RUN echo "/usr/local/lib64" | tee /etc/ld.so.conf.d/local.conf -RUN ldconfig -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-leap b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-leap deleted file mode 100644 index ea2dda5ec4e6..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-leap +++ /dev/null @@ -1,114 +0,0 @@ -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM opensuse/leap:latest AS devtools - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN zypper refresh && \ - zypper install --allow-downgrade -y cmake gcc gcc-c++ git gzip \ - libcurl-devel libopenssl-devel make tar wget -# ``` - -# #### Protobuf - -# OpenSUSE Leap includes a package for protobuf-2.6, but this is too old to -# support the Google Cloud Platform proto files, or to support gRPC for that -# matter. Manually install protobuf: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/google/protobuf/archive/v3.9.0.tar.gz -RUN tar -xf v3.9.0.tar.gz -WORKDIR /var/tmp/build/protobuf-3.9.0/cmake -RUN cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DBUILD_SHARED_LIBS=yes \ - -Dprotobuf_BUILD_TESTS=OFF \ - -H. -Bcmake-out -RUN cmake --build cmake-out --target install -- -j $(nproc) -RUN ldconfig -# ``` - -# #### c-ares - -# Recent versions of gRPC require c-ares >= 1.11, while OpenSUSE Leap -# distributes c-ares-1.9. We need some additional development tools to compile -# this library: - -# ```bash -RUN zypper refresh && \ - zypper install -y automake libtool -# ``` - -# Manually install a newer version: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/c-ares/c-ares/archive/cares-1_15_0.tar.gz -RUN tar -xf cares-1_15_0.tar.gz -WORKDIR /var/tmp/build/c-ares-cares-1_15_0 -RUN ./buildconf && ./configure && make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -# #### gRPC - -# The gRPC Makefile uses `which` to determine whether the compiler is available. -# Install this command for the extremely rare case where it may be missing from -# your workstation or build server: - -# ```bash -RUN zypper refresh && \ - zypper install -y which -# ``` - -# Then gRPC can be manually installed using: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/grpc/grpc/archive/v1.22.0.tar.gz -RUN tar -xf v1.22.0.tar.gz -WORKDIR /var/tmp/build/grpc-1.22.0 -ENV PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/local/lib64/pkgconfig -ENV LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64 -ENV PATH=/usr/local/bin:${PATH} -RUN make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -FROM devtools AS install - -# #### googleapis - -# We can now compile and install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-tumbleweed b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-tumbleweed deleted file mode 100644 index 9a87337870e3..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.opensuse-tumbleweed +++ /dev/null @@ -1,54 +0,0 @@ -# Copyright 2018 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM opensuse/tumbleweed:latest AS devtools - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN zypper refresh && \ - zypper install --allow-downgrade -y cmake gcc gcc-c++ git gzip \ - libcurl-devel libopenssl-devel make tar wget zlib-devel -# ``` - -# OpenSUSE:tumbleweed provides packages for gRPC, libcurl, and protobuf, and the -# versions of these packages are recent enough to support the Google Cloud -# Platform proto files. - -# ```bash -RUN zypper refresh && \ - zypper install -y grpc-devel gzip libcurl-devel tar wget -# ``` - -FROM devtools AS install - -# #### googleapis - -# We can now compile and install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-16.04 b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-16.04 deleted file mode 100644 index 030ed4a2aa85..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-16.04 +++ /dev/null @@ -1,100 +0,0 @@ -# Copyright 2018 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM ubuntu:16.04 AS devtools - -# Please keep the formatting in these commands, it is optimized to cut & paste -# into the README.md file. - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN apt update && \ - apt install -y automake build-essential cmake git gcc g++ cmake \ - libcurl4-openssl-dev libssl-dev libtool make pkg-config tar wget \ - zlib1g-dev -# ``` - -# #### c-ares - -# Recent versions of gRPC require c-ares >= 1.11, while Ubuntu-16.04 -# distributes c-ares-1.10. We can manually install a newer version -# of c-ares: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/c-ares/c-ares/archive/cares-1_15_0.tar.gz -RUN tar -xf cares-1_15_0.tar.gz -WORKDIR /var/tmp/build/c-ares-cares-1_15_0 -RUN ./buildconf && ./configure && make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -# #### Protobuf - -# While protobuf-3.0 is distributed with Ubuntu, the Google Cloud Plaform proto -# files require more recent versions (circa 3.4.x). To manually install a more -# recent version use: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/google/protobuf/archive/v3.9.0.tar.gz -RUN tar -xf v3.9.0.tar.gz -WORKDIR /var/tmp/build/protobuf-3.9.0/cmake -RUN cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DBUILD_SHARED_LIBS=yes \ - -Dprotobuf_BUILD_TESTS=OFF \ - -H. -Bcmake-out -RUN cmake --build cmake-out --target install -- -j $(nproc) -RUN ldconfig -# ``` - -# #### gRPC - -# Likewise, Ubuntu has packages for grpc-1.3.x, but this version is too old for -# the Google Cloud Platform APIs: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/grpc/grpc/archive/v1.22.0.tar.gz -RUN tar -xf v1.22.0.tar.gz -WORKDIR /var/tmp/build/grpc-1.22.0 -RUN make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -FROM devtools AS install - -# #### googleapis - -# Finally we can install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-18.04 b/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-18.04 deleted file mode 100644 index 486d24aa47db..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/Dockerfile.ubuntu-18.04 +++ /dev/null @@ -1,84 +0,0 @@ -# Copyright 2018 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -FROM ubuntu:18.04 AS devtools - -# Please keep the formatting in these commands, it is optimized to cut & paste -# into the README.md file. - -## [START INSTALL.md] - -# Install the minimal development tools: - -# ```bash -RUN apt update && \ - apt install -y build-essential cmake git gcc g++ cmake \ - libc-ares-dev libc-ares2 libcurl4-openssl-dev libssl-dev make \ - pkg-config tar wget zlib1g-dev -# ``` - -# #### Protobuf - -# While protobuf-3.0 is distributed with Ubuntu, the Google Cloud Plaform proto -# files require more recent versions (circa 3.4.x). To manually install a more -# recent version use: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/google/protobuf/archive/v3.9.0.tar.gz -RUN tar -xf v3.9.0.tar.gz -WORKDIR /var/tmp/build/protobuf-3.9.0/cmake -RUN cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DBUILD_SHARED_LIBS=yes \ - -Dprotobuf_BUILD_TESTS=OFF \ - -H. -Bcmake-out -RUN cmake --build cmake-out --target install -- -j $(nproc) -RUN ldconfig -# ``` - -# #### gRPC - -# Likewise, Ubuntu has packages for grpc-1.3.x, but this version is too old for -# the Google Cloud Platform APIs: - -# ```bash -WORKDIR /var/tmp/build -RUN wget -q https://github.com/grpc/grpc/archive/v1.22.0.tar.gz -RUN tar -xf v1.22.0.tar.gz -WORKDIR /var/tmp/build/grpc-1.22.0 -RUN make -j $(nproc) -RUN make install -RUN ldconfig -# ``` - -FROM devtools AS install - -# #### googleapis - -# Finally we can install `googleapis`. - -# ```bash -WORKDIR /home/build/cpp-cmakefiles -COPY . /home/build/cpp-cmakefiles -RUN cmake -H. -Bcmake-out -RUN cmake --build cmake-out -- -j $(nproc) -WORKDIR /home/build/cpp-cmakefiles/cmake-out -RUN cmake --build . --target install -# ``` - -## [END INSTALL.md] - -# Verify that the installed files are actually usable -RUN /home/build/cpp-cmakefiles/ci/test-install/compile-test-projects.sh diff --git a/third_party/cpp/googleapis/ci/kokoro/install/build.sh b/third_party/cpp/googleapis/ci/kokoro/install/build.sh deleted file mode 100755 index 42e85f39b6fc..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/build.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/usr/bin/env bash -# -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -set -eu - -if [[ $# -eq 1 ]]; then - export TEST_TARGET="${1}" -elif [[ -n "${KOKORO_JOB_NAME:-}" ]]; then - # Kokoro injects the KOKORO_JOB_NAME environment variable, the value of this - # variable is cloud-cpp/spanner/ (or more - # generally ). By convention we name these - # files `$foo.cfg` for continuous builds and `$foo-presubmit.cfg` for - # presubmit builds. Here we extract the value of "foo" and use it as the build - # name. - TEST_TARGET="$(basename "${KOKORO_JOB_NAME}" "-presubmit")" - export TEST_TARGET -else - echo "Aborting build as the distribution name is not defined." - echo "If you are invoking this script via the command line use:" - echo " $0 " - echo - echo "If this script is invoked by Kokoro, the CI system is expected to set" - echo "the KOKORO_JOB_NAME environment variable." - exit 1 -fi - -echo "================================================================" -echo "Change working directory to project root $(date)." -cd "$(dirname "$0")/../../.." - -if [[ -z "${PROJECT_ID+x}" ]]; then - readonly PROJECT_ID="cloud-devrel-kokoro-resources" -fi - -readonly DEV_IMAGE="gcr.io/${PROJECT_ID}/cpp-cmakefiles/test-install-dev-${TEST_TARGET}" -readonly IMAGE="gcr.io/${PROJECT_ID}/cpp-cmakefiles/test-install-${TEST_TARGET}" - -has_cache="false" - -# We download the cached dev image for pull requests on kokoro. For continuous -# jobs, we don't download the cached image. This means we build from scratch and -# upload the image for future builds for pull requests. -if [[ -n "${KOKORO_JOB_NAME:-}" ]] \ - && [[ -n "${KOKORO_GITHUB_PULL_REQUEST_NUMBER:-}" ]]; then - echo "================================================================" - echo "Download existing image (if available) for ${TEST_TARGET} $(date)." - if docker pull "${DEV_IMAGE}:latest"; then - echo "Existing image successfully downloaded." - has_cache="true" - fi - echo "================================================================" -fi - -echo "================================================================" -echo "Build base image with minimal development tools for ${TEST_TARGET} $(date)." -update_cache="false" - -devtools_flags=( - # Only build up to the stage that installs the minimal development tools, but - # does not compile any of our code. - "--target" "devtools" - # Create the image with the same tag as the cache we are using, so we can - # upload it. - "-t" "${DEV_IMAGE}:latest" - "-f" "ci/kokoro/install/Dockerfile.${TEST_TARGET}" -) - -if "${has_cache}"; then - devtools_flags+=("--cache-from=${DEV_IMAGE}:latest") -fi - -echo "Running docker build with " "${devtools_flags[@]}" -if docker build "${devtools_flags[@]}" ci; then - update_cache="true" -fi - -# We upload the cached image for continuous builds. -if "${update_cache}" && [[ -z "${KOKORO_GITHUB_PULL_REQUEST_NUMBER:-}" ]] \ - && [[ -n "${KOKORO_JOB_NAME:-}" ]]; then - echo "================================================================" - echo "Uploading updated base image for ${TEST_TARGET} $(date)." - # Do not stop the build on a failure to update the cache. - docker push "${DEV_IMAGE}:latest" || true -fi - -echo "================================================================" -echo "Run validation script for INSTALL instructions on ${TEST_TARGET}." -docker build \ - "--cache-from=${DEV_IMAGE}:latest" \ - "--target=install" \ - -t "${IMAGE}" \ - -f "ci/kokoro/install/Dockerfile.${TEST_TARGET}" . -echo "================================================================" diff --git a/third_party/cpp/googleapis/ci/kokoro/install/centos-7-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/centos-7-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/centos-7.cfg b/third_party/cpp/googleapis/ci/kokoro/install/centos-7.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/common.cfg b/third_party/cpp/googleapis/ci/kokoro/install/common.cfg deleted file mode 100644 index 77a3a1f9fefe..000000000000 --- a/third_party/cpp/googleapis/ci/kokoro/install/common.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# Format: //devtools/kokoro/config/proto/build.proto -# Copyright 2019 Google LLC -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -build_file: "cpp-cmakefiles/ci/kokoro/install/build.sh" -timeout_mins: 120 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared.cfg b/third_party/cpp/googleapis/ci/kokoro/install/fedora-30-shared.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/fedora-30.cfg b/third_party/cpp/googleapis/ci/kokoro/install/fedora-30.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap.cfg b/third_party/cpp/googleapis/ci/kokoro/install/opensuse-leap.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed.cfg b/third_party/cpp/googleapis/ci/kokoro/install/opensuse-tumbleweed.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04.cfg b/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-16.04.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04-presubmit.cfg b/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04-presubmit.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04.cfg b/third_party/cpp/googleapis/ci/kokoro/install/ubuntu-18.04.cfg deleted file mode 100644 index e69de29bb2d1..000000000000 -- cgit 1.4.1