From 5aa5d282eac56a21e74611c1cdbaa97bb5db2dca Mon Sep 17 00:00:00 2001 From: Vincent Ambo Date: Tue, 8 Feb 2022 02:05:36 +0300 Subject: chore(3p/abseil_cpp): unvendor abseil_cpp we weren't actually using these sources anymore, okay? Change-Id: If701571d9716de308d3512e1eb22c35db0877a66 Reviewed-on: https://cl.tvl.fyi/c/depot/+/5248 Tested-by: BuildkiteCI Reviewed-by: grfn Autosubmit: tazjin --- third_party/abseil_cpp/absl/time/clock.cc | 567 ------------------------------ 1 file changed, 567 deletions(-) delete mode 100644 third_party/abseil_cpp/absl/time/clock.cc (limited to 'third_party/abseil_cpp/absl/time/clock.cc') diff --git a/third_party/abseil_cpp/absl/time/clock.cc b/third_party/abseil_cpp/absl/time/clock.cc deleted file mode 100644 index 6862e011be1f..000000000000 --- a/third_party/abseil_cpp/absl/time/clock.cc +++ /dev/null @@ -1,567 +0,0 @@ -// Copyright 2017 The Abseil Authors. -// -// Licensed under the Apache License, Version 2.0 (the "License"); -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at -// -// https://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. - -#include "absl/time/clock.h" - -#include "absl/base/attributes.h" - -#ifdef _WIN32 -#include -#endif - -#include -#include -#include -#include -#include -#include - -#include "absl/base/internal/spinlock.h" -#include "absl/base/internal/unscaledcycleclock.h" -#include "absl/base/macros.h" -#include "absl/base/port.h" -#include "absl/base/thread_annotations.h" - -namespace absl { -ABSL_NAMESPACE_BEGIN -Time Now() { - // TODO(bww): Get a timespec instead so we don't have to divide. - int64_t n = absl::GetCurrentTimeNanos(); - if (n >= 0) { - return time_internal::FromUnixDuration( - time_internal::MakeDuration(n / 1000000000, n % 1000000000 * 4)); - } - return time_internal::FromUnixDuration(absl::Nanoseconds(n)); -} -ABSL_NAMESPACE_END -} // namespace absl - -// Decide if we should use the fast GetCurrentTimeNanos() algorithm -// based on the cyclecounter, otherwise just get the time directly -// from the OS on every call. This can be chosen at compile-time via -// -DABSL_USE_CYCLECLOCK_FOR_GET_CURRENT_TIME_NANOS=[0|1] -#ifndef ABSL_USE_CYCLECLOCK_FOR_GET_CURRENT_TIME_NANOS -#if ABSL_USE_UNSCALED_CYCLECLOCK -#define ABSL_USE_CYCLECLOCK_FOR_GET_CURRENT_TIME_NANOS 1 -#else -#define ABSL_USE_CYCLECLOCK_FOR_GET_CURRENT_TIME_NANOS 0 -#endif -#endif - -#if defined(__APPLE__) || defined(_WIN32) -#include "absl/time/internal/get_current_time_chrono.inc" -#else -#include "absl/time/internal/get_current_time_posix.inc" -#endif - -// Allows override by test. -#ifndef GET_CURRENT_TIME_NANOS_FROM_SYSTEM -#define GET_CURRENT_TIME_NANOS_FROM_SYSTEM() \ - ::absl::time_internal::GetCurrentTimeNanosFromSystem() -#endif - -#if !ABSL_USE_CYCLECLOCK_FOR_GET_CURRENT_TIME_NANOS -namespace absl { -ABSL_NAMESPACE_BEGIN -int64_t GetCurrentTimeNanos() { return GET_CURRENT_TIME_NANOS_FROM_SYSTEM(); } -ABSL_NAMESPACE_END -} // namespace absl -#else // Use the cyclecounter-based implementation below. - -// Allows override by test. -#ifndef GET_CURRENT_TIME_NANOS_CYCLECLOCK_NOW -#define GET_CURRENT_TIME_NANOS_CYCLECLOCK_NOW() \ - ::absl::time_internal::UnscaledCycleClockWrapperForGetCurrentTime::Now() -#endif - -// The following counters are used only by the test code. -static int64_t stats_initializations; -static int64_t stats_reinitializations; -static int64_t stats_calibrations; -static int64_t stats_slow_paths; -static int64_t stats_fast_slow_paths; - -namespace absl { -ABSL_NAMESPACE_BEGIN -namespace time_internal { -// This is a friend wrapper around UnscaledCycleClock::Now() -// (needed to access UnscaledCycleClock). -class UnscaledCycleClockWrapperForGetCurrentTime { - public: - static int64_t Now() { return base_internal::UnscaledCycleClock::Now(); } -}; -} // namespace time_internal - -// uint64_t is used in this module to provide an extra bit in multiplications - -// Return the time in ns as told by the kernel interface. Place in *cycleclock -// the value of the cycleclock at about the time of the syscall. -// This call represents the time base that this module synchronizes to. -// Ensures that *cycleclock does not step back by up to (1 << 16) from -// last_cycleclock, to discard small backward counter steps. (Larger steps are -// assumed to be complete resyncs, which shouldn't happen. If they do, a full -// reinitialization of the outer algorithm should occur.) -static int64_t GetCurrentTimeNanosFromKernel(uint64_t last_cycleclock, - uint64_t *cycleclock) { - // We try to read clock values at about the same time as the kernel clock. - // This value gets adjusted up or down as estimate of how long that should - // take, so we can reject attempts that take unusually long. - static std::atomic approx_syscall_time_in_cycles{10 * 1000}; - - uint64_t local_approx_syscall_time_in_cycles = // local copy - approx_syscall_time_in_cycles.load(std::memory_order_relaxed); - - int64_t current_time_nanos_from_system; - uint64_t before_cycles; - uint64_t after_cycles; - uint64_t elapsed_cycles; - int loops = 0; - do { - before_cycles = GET_CURRENT_TIME_NANOS_CYCLECLOCK_NOW(); - current_time_nanos_from_system = GET_CURRENT_TIME_NANOS_FROM_SYSTEM(); - after_cycles = GET_CURRENT_TIME_NANOS_CYCLECLOCK_NOW(); - // elapsed_cycles is unsigned, so is large on overflow - elapsed_cycles = after_cycles - before_cycles; - if (elapsed_cycles >= local_approx_syscall_time_in_cycles && - ++loops == 20) { // clock changed frequencies? Back off. - loops = 0; - if (local_approx_syscall_time_in_cycles < 1000 * 1000) { - local_approx_syscall_time_in_cycles = - (local_approx_syscall_time_in_cycles + 1) << 1; - } - approx_syscall_time_in_cycles.store( - local_approx_syscall_time_in_cycles, - std::memory_order_relaxed); - } - } while (elapsed_cycles >= local_approx_syscall_time_in_cycles || - last_cycleclock - after_cycles < (static_cast(1) << 16)); - - // Number of times in a row we've seen a kernel time call take substantially - // less than approx_syscall_time_in_cycles. - static std::atomic seen_smaller{ 0 }; - - // Adjust approx_syscall_time_in_cycles to be within a factor of 2 - // of the typical time to execute one iteration of the loop above. - if ((local_approx_syscall_time_in_cycles >> 1) < elapsed_cycles) { - // measured time is no smaller than half current approximation - seen_smaller.store(0, std::memory_order_relaxed); - } else if (seen_smaller.fetch_add(1, std::memory_order_relaxed) >= 3) { - // smaller delays several times in a row; reduce approximation by 12.5% - const uint64_t new_approximation = - local_approx_syscall_time_in_cycles - - (local_approx_syscall_time_in_cycles >> 3); - approx_syscall_time_in_cycles.store(new_approximation, - std::memory_order_relaxed); - seen_smaller.store(0, std::memory_order_relaxed); - } - - *cycleclock = after_cycles; - return current_time_nanos_from_system; -} - - -// --------------------------------------------------------------------- -// An implementation of reader-write locks that use no atomic ops in the read -// case. This is a generalization of Lamport's method for reading a multiword -// clock. Increment a word on each write acquisition, using the low-order bit -// as a spinlock; the word is the high word of the "clock". Readers read the -// high word, then all other data, then the high word again, and repeat the -// read if the reads of the high words yields different answers, or an odd -// value (either case suggests possible interference from a writer). -// Here we use a spinlock to ensure only one writer at a time, rather than -// spinning on the bottom bit of the word to benefit from SpinLock -// spin-delay tuning. - -// Acquire seqlock (*seq) and return the value to be written to unlock. -static inline uint64_t SeqAcquire(std::atomic *seq) { - uint64_t x = seq->fetch_add(1, std::memory_order_relaxed); - - // We put a release fence between update to *seq and writes to shared data. - // Thus all stores to shared data are effectively release operations and - // update to *seq above cannot be re-ordered past any of them. Note that - // this barrier is not for the fetch_add above. A release barrier for the - // fetch_add would be before it, not after. - std::atomic_thread_fence(std::memory_order_release); - - return x + 2; // original word plus 2 -} - -// Release seqlock (*seq) by writing x to it---a value previously returned by -// SeqAcquire. -static inline void SeqRelease(std::atomic *seq, uint64_t x) { - // The unlock store to *seq must have release ordering so that all - // updates to shared data must finish before this store. - seq->store(x, std::memory_order_release); // release lock for readers -} - -// --------------------------------------------------------------------- - -// "nsscaled" is unit of time equal to a (2**kScale)th of a nanosecond. -enum { kScale = 30 }; - -// The minimum interval between samples of the time base. -// We pick enough time to amortize the cost of the sample, -// to get a reasonably accurate cycle counter rate reading, -// and not so much that calculations will overflow 64-bits. -static const uint64_t kMinNSBetweenSamples = 2000 << 20; - -// We require that kMinNSBetweenSamples shifted by kScale -// have at least a bit left over for 64-bit calculations. -static_assert(((kMinNSBetweenSamples << (kScale + 1)) >> (kScale + 1)) == - kMinNSBetweenSamples, - "cannot represent kMaxBetweenSamplesNSScaled"); - -// A reader-writer lock protecting the static locations below. -// See SeqAcquire() and SeqRelease() above. -ABSL_CONST_INIT static absl::base_internal::SpinLock lock( - absl::kConstInit, base_internal::SCHEDULE_KERNEL_ONLY); -ABSL_CONST_INIT static std::atomic seq(0); - -// data from a sample of the kernel's time value -struct TimeSampleAtomic { - std::atomic raw_ns; // raw kernel time - std::atomic base_ns; // our estimate of time - std::atomic base_cycles; // cycle counter reading - std::atomic nsscaled_per_cycle; // cycle period - // cycles before we'll sample again (a scaled reciprocal of the period, - // to avoid a division on the fast path). - std::atomic min_cycles_per_sample; -}; -// Same again, but with non-atomic types -struct TimeSample { - uint64_t raw_ns; // raw kernel time - uint64_t base_ns; // our estimate of time - uint64_t base_cycles; // cycle counter reading - uint64_t nsscaled_per_cycle; // cycle period - uint64_t min_cycles_per_sample; // approx cycles before next sample -}; - -static struct TimeSampleAtomic last_sample; // the last sample; under seq - -static int64_t GetCurrentTimeNanosSlowPath() ABSL_ATTRIBUTE_COLD; - -// Read the contents of *atomic into *sample. -// Each field is read atomically, but to maintain atomicity between fields, -// the access must be done under a lock. -static void ReadTimeSampleAtomic(const struct TimeSampleAtomic *atomic, - struct TimeSample *sample) { - sample->base_ns = atomic->base_ns.load(std::memory_order_relaxed); - sample->base_cycles = atomic->base_cycles.load(std::memory_order_relaxed); - sample->nsscaled_per_cycle = - atomic->nsscaled_per_cycle.load(std::memory_order_relaxed); - sample->min_cycles_per_sample = - atomic->min_cycles_per_sample.load(std::memory_order_relaxed); - sample->raw_ns = atomic->raw_ns.load(std::memory_order_relaxed); -} - -// Public routine. -// Algorithm: We wish to compute real time from a cycle counter. In normal -// operation, we construct a piecewise linear approximation to the kernel time -// source, using the cycle counter value. The start of each line segment is at -// the same point as the end of the last, but may have a different slope (that -// is, a different idea of the cycle counter frequency). Every couple of -// seconds, the kernel time source is sampled and compared with the current -// approximation. A new slope is chosen that, if followed for another couple -// of seconds, will correct the error at the current position. The information -// for a sample is in the "last_sample" struct. The linear approximation is -// estimated_time = last_sample.base_ns + -// last_sample.ns_per_cycle * (counter_reading - last_sample.base_cycles) -// (ns_per_cycle is actually stored in different units and scaled, to avoid -// overflow). The base_ns of the next linear approximation is the -// estimated_time using the last approximation; the base_cycles is the cycle -// counter value at that time; the ns_per_cycle is the number of ns per cycle -// measured since the last sample, but adjusted so that most of the difference -// between the estimated_time and the kernel time will be corrected by the -// estimated time to the next sample. In normal operation, this algorithm -// relies on: -// - the cycle counter and kernel time rates not changing a lot in a few -// seconds. -// - the client calling into the code often compared to a couple of seconds, so -// the time to the next correction can be estimated. -// Any time ns_per_cycle is not known, a major error is detected, or the -// assumption about frequent calls is violated, the implementation returns the -// kernel time. It records sufficient data that a linear approximation can -// resume a little later. - -int64_t GetCurrentTimeNanos() { - // read the data from the "last_sample" struct (but don't need raw_ns yet) - // The reads of "seq" and test of the values emulate a reader lock. - uint64_t base_ns; - uint64_t base_cycles; - uint64_t nsscaled_per_cycle; - uint64_t min_cycles_per_sample; - uint64_t seq_read0; - uint64_t seq_read1; - - // If we have enough information to interpolate, the value returned will be - // derived from this cycleclock-derived time estimate. On some platforms - // (POWER) the function to retrieve this value has enough complexity to - // contribute to register pressure - reading it early before initializing - // the other pieces of the calculation minimizes spill/restore instructions, - // minimizing icache cost. - uint64_t now_cycles = GET_CURRENT_TIME_NANOS_CYCLECLOCK_NOW(); - - // Acquire pairs with the barrier in SeqRelease - if this load sees that - // store, the shared-data reads necessarily see that SeqRelease's updates - // to the same shared data. - seq_read0 = seq.load(std::memory_order_acquire); - - base_ns = last_sample.base_ns.load(std::memory_order_relaxed); - base_cycles = last_sample.base_cycles.load(std::memory_order_relaxed); - nsscaled_per_cycle = - last_sample.nsscaled_per_cycle.load(std::memory_order_relaxed); - min_cycles_per_sample = - last_sample.min_cycles_per_sample.load(std::memory_order_relaxed); - - // This acquire fence pairs with the release fence in SeqAcquire. Since it - // is sequenced between reads of shared data and seq_read1, the reads of - // shared data are effectively acquiring. - std::atomic_thread_fence(std::memory_order_acquire); - - // The shared-data reads are effectively acquire ordered, and the - // shared-data writes are effectively release ordered. Therefore if our - // shared-data reads see any of a particular update's shared-data writes, - // seq_read1 is guaranteed to see that update's SeqAcquire. - seq_read1 = seq.load(std::memory_order_relaxed); - - // Fast path. Return if min_cycles_per_sample has not yet elapsed since the - // last sample, and we read a consistent sample. The fast path activates - // only when min_cycles_per_sample is non-zero, which happens when we get an - // estimate for the cycle time. The predicate will fail if now_cycles < - // base_cycles, or if some other thread is in the slow path. - // - // Since we now read now_cycles before base_ns, it is possible for now_cycles - // to be less than base_cycles (if we were interrupted between those loads and - // last_sample was updated). This is harmless, because delta_cycles will wrap - // and report a time much much bigger than min_cycles_per_sample. In that case - // we will take the slow path. - uint64_t delta_cycles = now_cycles - base_cycles; - if (seq_read0 == seq_read1 && (seq_read0 & 1) == 0 && - delta_cycles < min_cycles_per_sample) { - return base_ns + ((delta_cycles * nsscaled_per_cycle) >> kScale); - } - return GetCurrentTimeNanosSlowPath(); -} - -// Return (a << kScale)/b. -// Zero is returned if b==0. Scaling is performed internally to -// preserve precision without overflow. -static uint64_t SafeDivideAndScale(uint64_t a, uint64_t b) { - // Find maximum safe_shift so that - // 0 <= safe_shift <= kScale and (a << safe_shift) does not overflow. - int safe_shift = kScale; - while (((a << safe_shift) >> safe_shift) != a) { - safe_shift--; - } - uint64_t scaled_b = b >> (kScale - safe_shift); - uint64_t quotient = 0; - if (scaled_b != 0) { - quotient = (a << safe_shift) / scaled_b; - } - return quotient; -} - -static uint64_t UpdateLastSample( - uint64_t now_cycles, uint64_t now_ns, uint64_t delta_cycles, - const struct TimeSample *sample) ABSL_ATTRIBUTE_COLD; - -// The slow path of GetCurrentTimeNanos(). This is taken while gathering -// initial samples, when enough time has elapsed since the last sample, and if -// any other thread is writing to last_sample. -// -// Manually mark this 'noinline' to minimize stack frame size of the fast -// path. Without this, sometimes a compiler may inline this big block of code -// into the fast path. That causes lots of register spills and reloads that -// are unnecessary unless the slow path is taken. -// -// TODO(absl-team): Remove this attribute when our compiler is smart enough -// to do the right thing. -ABSL_ATTRIBUTE_NOINLINE -static int64_t GetCurrentTimeNanosSlowPath() ABSL_LOCKS_EXCLUDED(lock) { - // Serialize access to slow-path. Fast-path readers are not blocked yet, and - // code below must not modify last_sample until the seqlock is acquired. - lock.Lock(); - - // Sample the kernel time base. This is the definition of - // "now" if we take the slow path. - static uint64_t last_now_cycles; // protected by lock - uint64_t now_cycles; - uint64_t now_ns = GetCurrentTimeNanosFromKernel(last_now_cycles, &now_cycles); - last_now_cycles = now_cycles; - - uint64_t estimated_base_ns; - - // ---------- - // Read the "last_sample" values again; this time holding the write lock. - struct TimeSample sample; - ReadTimeSampleAtomic(&last_sample, &sample); - - // ---------- - // Try running the fast path again; another thread may have updated the - // sample between our run of the fast path and the sample we just read. - uint64_t delta_cycles = now_cycles - sample.base_cycles; - if (delta_cycles < sample.min_cycles_per_sample) { - // Another thread updated the sample. This path does not take the seqlock - // so that blocked readers can make progress without blocking new readers. - estimated_base_ns = sample.base_ns + - ((delta_cycles * sample.nsscaled_per_cycle) >> kScale); - stats_fast_slow_paths++; - } else { - estimated_base_ns = - UpdateLastSample(now_cycles, now_ns, delta_cycles, &sample); - } - - lock.Unlock(); - - return estimated_base_ns; -} - -// Main part of the algorithm. Locks out readers, updates the approximation -// using the new sample from the kernel, and stores the result in last_sample -// for readers. Returns the new estimated time. -static uint64_t UpdateLastSample(uint64_t now_cycles, uint64_t now_ns, - uint64_t delta_cycles, - const struct TimeSample *sample) - ABSL_EXCLUSIVE_LOCKS_REQUIRED(lock) { - uint64_t estimated_base_ns = now_ns; - uint64_t lock_value = SeqAcquire(&seq); // acquire seqlock to block readers - - // The 5s in the next if-statement limits the time for which we will trust - // the cycle counter and our last sample to give a reasonable result. - // Errors in the rate of the source clock can be multiplied by the ratio - // between this limit and kMinNSBetweenSamples. - if (sample->raw_ns == 0 || // no recent sample, or clock went backwards - sample->raw_ns + static_cast(5) * 1000 * 1000 * 1000 < now_ns || - now_ns < sample->raw_ns || now_cycles < sample->base_cycles) { - // record this sample, and forget any previously known slope. - last_sample.raw_ns.store(now_ns, std::memory_order_relaxed); - last_sample.base_ns.store(estimated_base_ns, std::memory_order_relaxed); - last_sample.base_cycles.store(now_cycles, std::memory_order_relaxed); - last_sample.nsscaled_per_cycle.store(0, std::memory_order_relaxed); - last_sample.min_cycles_per_sample.store(0, std::memory_order_relaxed); - stats_initializations++; - } else if (sample->raw_ns + 500 * 1000 * 1000 < now_ns && - sample->base_cycles + 50 < now_cycles) { - // Enough time has passed to compute the cycle time. - if (sample->nsscaled_per_cycle != 0) { // Have a cycle time estimate. - // Compute time from counter reading, but avoiding overflow - // delta_cycles may be larger than on the fast path. - uint64_t estimated_scaled_ns; - int s = -1; - do { - s++; - estimated_scaled_ns = (delta_cycles >> s) * sample->nsscaled_per_cycle; - } while (estimated_scaled_ns / sample->nsscaled_per_cycle != - (delta_cycles >> s)); - estimated_base_ns = sample->base_ns + - (estimated_scaled_ns >> (kScale - s)); - } - - // Compute the assumed cycle time kMinNSBetweenSamples ns into the future - // assuming the cycle counter rate stays the same as the last interval. - uint64_t ns = now_ns - sample->raw_ns; - uint64_t measured_nsscaled_per_cycle = SafeDivideAndScale(ns, delta_cycles); - - uint64_t assumed_next_sample_delta_cycles = - SafeDivideAndScale(kMinNSBetweenSamples, measured_nsscaled_per_cycle); - - int64_t diff_ns = now_ns - estimated_base_ns; // estimate low by this much - - // We want to set nsscaled_per_cycle so that our estimate of the ns time - // at the assumed cycle time is the assumed ns time. - // That is, we want to set nsscaled_per_cycle so: - // kMinNSBetweenSamples + diff_ns == - // (assumed_next_sample_delta_cycles * nsscaled_per_cycle) >> kScale - // But we wish to damp oscillations, so instead correct only most - // of our current error, by solving: - // kMinNSBetweenSamples + diff_ns - (diff_ns / 16) == - // (assumed_next_sample_delta_cycles * nsscaled_per_cycle) >> kScale - ns = kMinNSBetweenSamples + diff_ns - (diff_ns / 16); - uint64_t new_nsscaled_per_cycle = - SafeDivideAndScale(ns, assumed_next_sample_delta_cycles); - if (new_nsscaled_per_cycle != 0 && - diff_ns < 100 * 1000 * 1000 && -diff_ns < 100 * 1000 * 1000) { - // record the cycle time measurement - last_sample.nsscaled_per_cycle.store( - new_nsscaled_per_cycle, std::memory_order_relaxed); - uint64_t new_min_cycles_per_sample = - SafeDivideAndScale(kMinNSBetweenSamples, new_nsscaled_per_cycle); - last_sample.min_cycles_per_sample.store( - new_min_cycles_per_sample, std::memory_order_relaxed); - stats_calibrations++; - } else { // something went wrong; forget the slope - last_sample.nsscaled_per_cycle.store(0, std::memory_order_relaxed); - last_sample.min_cycles_per_sample.store(0, std::memory_order_relaxed); - estimated_base_ns = now_ns; - stats_reinitializations++; - } - last_sample.raw_ns.store(now_ns, std::memory_order_relaxed); - last_sample.base_ns.store(estimated_base_ns, std::memory_order_relaxed); - last_sample.base_cycles.store(now_cycles, std::memory_order_relaxed); - } else { - // have a sample, but no slope; waiting for enough time for a calibration - stats_slow_paths++; - } - - SeqRelease(&seq, lock_value); // release the readers - - return estimated_base_ns; -} -ABSL_NAMESPACE_END -} // namespace absl -#endif // ABSL_USE_CYCLECLOCK_FOR_GET_CURRENT_TIME_NANOS - -namespace absl { -ABSL_NAMESPACE_BEGIN -namespace { - -// Returns the maximum duration that SleepOnce() can sleep for. -constexpr absl::Duration MaxSleep() { -#ifdef _WIN32 - // Windows Sleep() takes unsigned long argument in milliseconds. - return absl::Milliseconds( - std::numeric_limits::max()); // NOLINT(runtime/int) -#else - return absl::Seconds(std::numeric_limits::max()); -#endif -} - -// Sleeps for the given duration. -// REQUIRES: to_sleep <= MaxSleep(). -void SleepOnce(absl::Duration to_sleep) { -#ifdef _WIN32 - Sleep(to_sleep / absl::Milliseconds(1)); -#else - struct timespec sleep_time = absl::ToTimespec(to_sleep); - while (nanosleep(&sleep_time, &sleep_time) != 0 && errno == EINTR) { - // Ignore signals and wait for the full interval to elapse. - } -#endif -} - -} // namespace -ABSL_NAMESPACE_END -} // namespace absl - -extern "C" { - -ABSL_ATTRIBUTE_WEAK void AbslInternalSleepFor(absl::Duration duration) { - while (duration > absl::ZeroDuration()) { - absl::Duration to_sleep = std::min(duration, absl::MaxSleep()); - absl::SleepOnce(to_sleep); - duration -= to_sleep; - } -} - -} // extern "C" -- cgit 1.4.1