From 795a97466527a5f02e79e47b7fb316c78ffde667 Mon Sep 17 00:00:00 2001 From: Vincent Ambo Date: Fri, 20 Dec 2019 22:13:07 +0000 Subject: chore(kontemplate): Prepare kontemplate for depot-merge This merge will not yet include moving over to buildGo.nix, as support for testing and such is not present in that library yet. --- ops/kontemplate/docs/cluster-config.md | 106 ++++++++++++++++++++ ops/kontemplate/docs/resource-sets.md | 170 ++++++++++++++++++++++++++++++++ ops/kontemplate/docs/templates.md | 153 ++++++++++++++++++++++++++++ ops/kontemplate/docs/tips-and-tricks.md | 77 +++++++++++++++ 4 files changed, 506 insertions(+) create mode 100644 ops/kontemplate/docs/cluster-config.md create mode 100644 ops/kontemplate/docs/resource-sets.md create mode 100644 ops/kontemplate/docs/templates.md create mode 100644 ops/kontemplate/docs/tips-and-tricks.md (limited to 'ops/kontemplate/docs') diff --git a/ops/kontemplate/docs/cluster-config.md b/ops/kontemplate/docs/cluster-config.md new file mode 100644 index 000000000000..fee1f576347c --- /dev/null +++ b/ops/kontemplate/docs/cluster-config.md @@ -0,0 +1,106 @@ +Cluster configuration +========================== + +Every cluster (or "environment") that requires individual configuration is specified in +a very simple YAML file in Kontemplate. + +An example file for a hypothetical test environment could look like this: + +```yaml +--- +context: k8s.test.mydomain.com +global: + clusterName: test-cluster + defaultReplicas: 2 +import: + - test-secrets.yaml +include: + - name: gateway + path: tools/nginx + values: + tlsDomains: + - test.oslo.pub + - test.tazj.in + - path: backend + values: + env: test + include: + - name: blog + values: + url: test.tazj.in + - name: pub-service +``` + + +**Table of Contents** + +- [Cluster configuration](#cluster-configuration) + - [Fields](#fields) + - [`context`](#context) + - [`global`](#global) + - [`import`](#import) + - [`include`](#include) + - [External variables](#external-variables) + + + +## Fields + +This is documentation for the individual fields in a cluster context file. + +### `context` + +The `context` field contains the name of the kubectl-context. You can list context names with +'kubectl config get-contexts'. + +This must be set here so that Kontemplate can use the correct context when calling kubectl. + +This field is **required** for `kubectl`-wrapping commands. It can be left out if only the `template`-command is used. + +### `global` + +The `global` field contains a key/value map of variables that should be available to all resource +sets in the cluster. + +This field is **optional**. + +### `import` + +The `import` field contains the file names of additional YAML or JSON files from which global +variables should be loaded. Using this field makes it possible to keep certain configuration that +is the same for some, but not all, clusters in a common place. + +This field is **optional**. + +### `include` + +The `include` field contains the actual resource sets to be included in the cluster. + +Information about the structure of resource sets can be found in the [resource set documentation][]. + +This field is **required**. + +## External variables + +As mentioned above, extra variables can be loaded from additional YAML or JSON files. Assuming you +have a file called `test-secrets.yaml` which contains variables that should be shared between a `test` +and `dev` cluster, you could include it in your context as such: + +```yaml +# test-secrets.yaml: +mySecretVar: foo-bar-12345 + +# test-cluster.yaml: +context: k8s.test.mydomain.com +include: + - test-secrets.yaml + +# dev-cluster.yaml: +context: k8s.dev.mydomain.com +include: + - test-secrets.yaml +``` + +The variable `mySecretVar` is then available as a global variable. + +[resource set documentation]: resource-sets.md diff --git a/ops/kontemplate/docs/resource-sets.md b/ops/kontemplate/docs/resource-sets.md new file mode 100644 index 000000000000..1444dd491249 --- /dev/null +++ b/ops/kontemplate/docs/resource-sets.md @@ -0,0 +1,170 @@ +Resource Sets +================ + +Resource sets are collections of Kubernetes resources that should be passed to `kubectl` together. + +Technically a resource set is simply a folder with a few YAML and/or JSON templates in it. + + +**Table of Contents** + +- [Resource Sets](#resource-sets) +- [Creating resource sets](#creating-resource-sets) + - [Default variables](#default-variables) +- [Including resource sets](#including-resource-sets) + - [Fields](#fields) + - [`name`](#name) + - [`path`](#path) + - [`values`](#values) + - [`args`](#args) + - [`include`](#include) + - [Multiple includes](#multiple-includes) + - [Nesting resource sets](#nesting-resource-sets) + - [Caveats](#caveats) + + + +# Creating resource sets + +Simply create a folder in your Kontemplate repository and place a YAML or JSON file in it. These +files get interpreted as [templates][] during Kontemplate runs and variables (as well as template +logic or functions) will be interpolated. + +Refer to the template documentation for information on how to write templates. + +## Default variables + +Sometimes it is useful to specify default values for variables that should be interpolated during +a run if the [cluster configuration][] does not specify a variable explicitly. + +This can be done simply by placing a `default.yaml` or `default.json` file in the resource set +folder and filling it with key/value pairs of the intended default variables. + +Kontemplate will error during interpolation if any variables are left unspecified. + +# Including resource sets + +Under the cluster configuration `include` key resource sets are included and required variables +are specified. For example: + +```yaml +include: + - name: some-api + values: + version: 1.2-SNAPSHOT +``` + +This will include a resource set from a folder called `some-api` and set the specified `version` variable. + +## Fields + +The available fields when including a resource set are these: + +### `name` + +The `name` field contains the name of the resource set. This name can be used to refer to the resource set +when specifying explicit includes or excludes during a run. + +By default it is assumed that the `name` is the path to the resource set folder, but this can be overridden. + +This field is **required**. + +### `path` + +The `path` field specifies an explicit path to a resource set folder in the case that it should differ from +the resource set's `name`. + +This field is **optional**. + +### `values` + +The `values` field specifies key/values pairs of variables that should be available during templating. + +This field is **optional**. + +### `args` + +The `args` field specifies a list of arguments that should be passed to `kubectl`. + +This field is **optional**. + +### `include` + +The `include` field specifies additional resource sets that should be included and that should inherit the +variables of this resource set. + +The fully qualified names of "nested" resource sets are set to `${PARENT_NAME}/${CHILD_NAME}` and paths are +merged in the same way. + +This makes it easy to organise different resource sets as "groups" to include / exclude them collectively +during runs. + +This field is **optional**. + +## Multiple includes + +Resource sets can be included multiple times with different configurations. In this case it is recommended +to set the `path` and `name` fields explicitly. For example: + +```yaml +include: + - name: forwarder-europe + path: tools/forwarder + values: + source: europe + - name: forwarder-asia + path: tools/forwarder + values: + source: asia +``` + +The two different configurations can be referred to by their set names, but will use the same resource +templates with different configurations. + +## Nesting resource sets + +As mentioned above for the `include` field, resource sets can be nested. This lets users group resource +sets in logical ways using simple folder structures. + +Assuming a folder structure like: + +``` +├── backend +│   ├── auth-api +│   ├── message-api +│   └── order-api +└── frontend + ├── app-page + └── login-page +``` + +With each of these folders being a resource set, they could be included in a cluster configuration like so: + +```yaml +include: + - name: backend + include: + - name: auth-api + - name: message-api + - name: order-api + - name: frontend: + include: + - name: app-page + - name: login-page +``` + +Kontemplate could then be run with, for example, `--include backend` to only include the resource sets nested +in the backend group. Specific resource sets can also be targeted, for example as `--include backend/order-api`. + +Variables specified in the parent resource set are inherited by the children. + +### Caveats + +Two caveats apply that users should be aware of: + +1. The parent resource set can not contain any resource templates itself. + +2. Only one level of nesting is supported. Specifying `include` again on a nested resource set will be ignored. + +[templates]: templates.md +[cluster configuration]: cluster-config.md diff --git a/ops/kontemplate/docs/templates.md b/ops/kontemplate/docs/templates.md new file mode 100644 index 000000000000..32da205108de --- /dev/null +++ b/ops/kontemplate/docs/templates.md @@ -0,0 +1,153 @@ +Kontemplate templates +===================== + +The template file format is based on Go's [templating engine][] in combination +with a small extension library called [sprig][] that adds additional template +functions. + +Go templates can either simply display variables or build more complicated +*pipelines* in which variables are passed to functions for further processing, +or in which conditionals are evaluated for more complex template logic. + +It is recommended that you check out the Golang [documentation][] for the templating +engine in addition to the cherry-picked features listed here. + + +**Table of Contents** + +- [Kontemplate templates](#kontemplate-templates) + - [Basic variable interpolation](#basic-variable-interpolation) + - [Example:](#example) + - [Template functions](#template-functions) + - [Examples:](#examples) + - [Conditionals & ranges](#conditionals--ranges) + - [Caveats](#caveats) + + + +## Basic variable interpolation + +The basic template format uses `{{ .variableName }}` as the interpolation format. + +### Example: + +Assuming that you include a resource set as such: + +``` +- name: api-gateway + values: + internalHost: http://my-internal-host/ +``` + +And the api-gateway resource set includes a ConfigMap (some fields left out for +the example): + +``` +# api-gateway/configmap.yaml: +--- +kind: ConfigMap +metadata: + name: api-gateway-config +data: + internalHost: {{ .internalHost }} +``` + +The resulting output will be: + +``` + +--- +kind: ConfigMap +metadata: + name: api-gateway-config +data: + internalHost: http://my-internal-host/ +``` + +## Template functions + +Go templates support template functions which you can think of as a sort of +shell-like pipeline where text flows through transformations from left to +right. + +Some template functions come from Go's standard library and are listed in the +[Go documentation][]. In addition the functions declared by [sprig][] are +available in kontemplate, as well as five custom functions: + +* `json`: Encodes any supplied data structure as JSON. +* `gitHEAD`: Retrieves the commit hash at Git `HEAD`. +* `passLookup`: Looks up the supplied key in [pass][]. +* `insertFile`: Insert the contents of the given file in the resource + set folder as a string. +* `insertTemplate`: Insert the contents of the given template in the resource + set folder as a string. + +## Examples: + +``` +# With the following values: +name: Donald +certKeyPath: my-website/cert-key + +# The following interpolations are possible: + +{{ .name | upper }} +-> DONALD + +{{ .name | upper | repeat 2 }} +-> DONALD DONALD + +{{ .certKeyPath | passLookup }} +-> Returns content of 'my-website/cert-key' from pass + +{{ gitHEAD }} +-> Returns the Git commit hash at HEAD. +``` + +## Conditionals & ranges + +Some logic is supported in Golang templates and can be used in Kontemplate, too. + +With the following values: + +``` +useKube2IAM: true +servicePorts: + - 8080 + - 9090 +``` + +The following interpolations are possible: + +``` +# Conditionally insert something in the template: +metadata: + annotations: + foo: bar + {{ if .useKube2IAM -}} iam.amazonaws.com/role: my-api {{- end }} +``` + +``` +# Iterate over a list of values +ports: + {{ range .servicePorts }} + - port: {{ . }} + {{ end }} +``` + +Check out the Golang documentation (linked above) for more information about template logic. + +## Caveats + +Kontemplate does not by itself parse any of the content of the templates, which +means that it does not validate whether the resources you supply are valid YAML +or JSON. + +You can perform some validation by using `kontemplate apply --dry-run` which +will make use of the Dry-Run functionality in `kubectl`. + +[templating engine]: https://golang.org/pkg/text/template/ +[documentation]: https://golang.org/pkg/text/template/ +[sprig]: http://masterminds.github.io/sprig/ +[Go documentation]: https://golang.org/pkg/text/template/#hdr-Functions +[pass]: https://www.passwordstore.org/ diff --git a/ops/kontemplate/docs/tips-and-tricks.md b/ops/kontemplate/docs/tips-and-tricks.md new file mode 100644 index 000000000000..5401ac91e5a3 --- /dev/null +++ b/ops/kontemplate/docs/tips-and-tricks.md @@ -0,0 +1,77 @@ +Kontemplate tips & tricks +========================= + + +**Table of Contents** + +- [Kontemplate tips & tricks](#kontemplate-tips--tricks) + - [Update Deployments when ConfigMaps change](#update-deployments-when-configmaps-change) + - [direnv & pass](#direnv--pass) + + + +## Update Deployments when ConfigMaps change + +Kubernetes does [not currently][] have the ability to perform rolling updates +of Deployments and other resource types when `ConfigMap` or `Secret` objects +are updated. + +It is possible to make use of annotations and templating functions in +Kontemplate to force updates to these resources anyways. + +For example: + +```yaml +# A ConfigMap that contains some configuration for your app +--- +kind: ConfigMap +metadata: + name: app-config +data: + app.conf: | + name: {{ .appName }} + foo: bar +``` + +Now whenever the `appName` variable changes or we make an edit to the +`ConfigMap` we would like to update the `Deployment` making use of it, too. We +can do this by adding a hash of the parsed template to the annotations of the +created `Pod` objects: + +```yaml + +--- +kind: Deployment +metadata: + name: app +spec: + template: + metadata: + annotations: + configHash: {{ insertTemplate "app-config.yaml" | sha256sum }} + spec: + containers: + - name: app + # Some details omitted ... + volumeMounts: + - name: config + mountPath: /etc/app/ + volumes: + - name: config + configMap: + name: app-config +``` + +Now any change to the `ConfigMap` - either by directly editing the yaml file or +via a changed template variable - will cause the annotation to change, +triggering a rolling update of all relevant pods. + +## direnv & pass + +Users of `pass` may have multiple different password stores on their machines. +Assuming that `kontemplate` configuration exists somewhere on the filesystem +per project, it is easy to use [direnv][] to switch to the correct +`PASSWORD_STORE_DIR` variable when entering the folder. + +[not currently]: https://github.com/kubernetes/kubernetes/issues/22368 +[direnv]: https://direnv.net/ -- cgit 1.4.1