Age | Commit message (Collapse) | Author | Files | Lines |
|
When resolving a select expression (`attrs.name` or `attrs.name or
default`), if the set compiles to a constant attribute set (as is most
notably the case with `builtins`) we can backtrack and replace that
attribute set directly with the compiled value.
For something like `builtins.length`, this will directly emit an
`OpConstant` that leaves the `length` builtin on the stack.
Change-Id: I639654e065a06e8cfcbcacb528c6da7ec9e513ee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7957
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
This fixes a very complicated bug (b/246). Evaluation
progresses *much* further after this, leading to several less
complicated bugs likely being uncovered by this
What was the problem?
=====================
Previously, when evaluating a thunk, we had a code path that looked
like this:
match *thunk {
ThunkRepr::Evaluated(Value::Thunk(ref inner_thunk)) => {
let inner_repr = inner_thunk.0.borrow().clone();
drop(thunk);
self.0.replace(inner_repr);
}
/* ... */
}
This code path created a copy of the inner `ThunkRepr` of a nested
thunk, and moved that copy into the `ThunkRepr` of the parent.
The effect of this was that the original `ThunkRepr` (unforced!) lived
on in the original thunk, without the memoization of the subsequent
forcing applying to it.
This had the result that Tvix would repeatedly evaluate these thunks
without ever memoizing them, if they occured repeatedly as shared
inner thunks. Most notably, this would *always* occur when
builtins.import was used.
What's the solution?
====================
I have completely rewritten `Thunk::force_trampoline_self` to make all
flows that can occur in it explicit. I have also removed the outer
loop inside of that function, and resorted to more use of trampolining
instead.
The function is now well-commented and it should be possible to read
it from top-to-bottom and get a general sense of what is going on,
though the trampolining itself (which is implemented in the VM) needs
to be at least partially understood for this.
What's the new problem(s)?
==========================
One new (known) problem is that we have to construct `Error` instances
in all error types here, but we do not have spans available in some
thunk-related situations. Due to b/238 we cannot ask the VM for an
arbitrary span from the callsite leading to the force. This means that
there are now code paths where, under certain conditions, causing an
evaluation error during thunk forcing will panic.
To fix this we will need to investigate and fix b/238, and/or add a
span tracking mechanism to thunks themselves.
What other impacts does this have?
==================================
With this commit, eval of nixpkgs mostly succeeds (things like stdenv
evaluate to the same hashes for us and C++ Nix, meaning we now
construct identical derivations without eval breaking).
Due to this we progress much further into nixpkgs, which lets us
uncover more additional bugs. For example, after this commit we can
quickly see that cl/7949 introduces some kind of behavioural issue and
should not be merged as-is (this was not apparent before).
Additionally, tvix-eval is now seemingly very fast. When doing
performance analysis of a nixpkgs eval, we now mostly see the code
path for shelling out to C++ Nix to add things to the store in there.
We still need those code paths, so we can not (yet) do a performance
analysis beyond that.
Change-Id: I738525bad8bc5ede5d8c737f023b14b8f4160612
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8012
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Two main reasons:
1. Traversing the structure to do this optimisation is
actually *slower* than not optimising it.
2. There are literally hundreds of thousands of incidences of this in
nixpkgs, and with some of the weird code there some of
these (functionally) useless parens are actually required for
readability reasons.
Change-Id: I1044b1c5f9fe20df4b6085851fc3b191277c65dc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7917
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
This makes it possible to inject builtins into the builtin set that
are written in Nix code, and which at runtime are represented by a
thunk that will compile them the first time they are used.
Change-Id: Ia632367328f66fb2f26cb64ae464f8f3dc9c6d30
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7891
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
These don't apply anymore since the "antidote-CL".
Change-Id: I40ee73ef43d44bbfc650a8fe6c2b33263dd06959
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7890
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
The codebase contains a lot of complexity and odd roundabout
handling for shadowing globals. I'm pretty sure none of this is
necessary, and all of it disappears if you simply make the globals
part of the ordinary identifier resolution chain, with their own
scope up above the root scope. Then the ordinary shadowing routines
do the right thing, and no special cases or new terminology are
required.
This commit does that.
Note by tazjin: This commit was originally abandoned when Adam decided
not to take away reviewer bandwidth for this at the time (eval was
still in a much earlier stage). As we've recently done some
significant refactoring of globals initialisation this came up again,
and it seems we can easily cover the use-cases of the poison tracking
in other ways now, so I've rebased, updated and resurrected the CL.
Co-Authored-By: Vincent Ambo <tazjin@tvl.su>
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ib3309a47a7b31fa5bf10466bade0d876b76ae462
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7089
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
This makes it possible for users to add additional context to an
error, which will then be rendered as an additional secondary span in
the formatted error output.
We should strive to do this basically anywhere errors are raised that
can occur multiple times, *especially* during type casts. This was
triggered by me debugging a type cast error attached to a fairly
large-ish span (a builtin invocation).
Change-Id: I51be41fabee00cf04de973935daf34fe6424e76f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7849
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
This is unnecessary, Rc already provides all the boxing we need.
Change-Id: I08cf0939c48da43f04c847526c7e5dae5336d528
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7749
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This is a somewhat terrifying hack that enables us to support
`builtins.builtins`, by running a "fake compilation" inside of a
suspended native thunk that can resolve the weak pointer to the
globals.
With this implementation, the thunk at `builtins.builtins` actually
resolves to the "real" `builtins` (verified with a new test).
This is kind of ugly, and it's something users shouldn't use, but
bubbling a warning out of this is difficult at the moment due to a
little bit of trickery with how the spans in suspended native thunks
work (they don't) (see b/237, b/238)
Change-Id: I67d0e93246dd5b279c960aeda00402031aa12af3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7748
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Change-Id: I567ca0682012b9d09f1217e57a104ac5671f8d82
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7771
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
|
|
Change-Id: Ib6ef7ce514abbd3e372dfe9df7137aa36dbda9d4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7770
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
This is marginally more efficient and has simpler bytecode.
Change-Id: Iad37c9aeef24583e8f696911bcd83d43639f2e36
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7769
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Change-Id: I82bec6fe2210bcb88c46fd2fdf3e26bd613d1c1f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7768
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
This adds a mechanism to the compiler to compile an expression without
emitting any code. This allows for detected dead code to still be
compiled to detect errors & warnings inside of it.
Change-Id: Ie78479173570e9c819d8f32ae683ce34234a4c5d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7767
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
This optimiser can rewrite some expressions into more efficient forms,
and warn users about those cases.
As a proof-of-concept, only some simple boolean comparisons are
supported for now.
Change-Id: I7df561118cfbad281fc99523e859bc66e7a1adcb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7766
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
This adds a very minimal amount of additional Rc-increments (~1 per
compilation), but makes it a lot easier to add an AST-optimising
compiler pass without incurring a lot of extra cost.
Change-Id: I57208bdfc8882e3ae21c5850e14aa380d3ccea36
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7765
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
This would make it possible to implement something like a linter based
on the tvix-eval compiler warnings.
Change-Id: I1feb4e7c4a44be7d1204b0a962ab522fd32b93c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7763
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
There was probably a misunderstanding somewhere about the
with_stack_size being related to how far away it is from the with, but
it is about whether there is a with at all.
This broke a warning (`UselessInherit`), and may actually have let to
more inefficient codegen in some cases.
Change-Id: I08338ea59ae39dad01ca8a4e09d934a936cdea2f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7762
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Previously the construction of globals (a compiler-only concept) and
builtins (a (now) user-facing API) was intermingled between multiple
different modules, and kind of difficult to understand.
The complexity of this had grown in large part due to the
implementation of `builtins.import`, which required the notorious
"knot-tying" trick using Rc::new_cyclic (see cl/7097) for constructing
the set of globals.
As part of the new `Evaluation` API users should have the ability to
bring their own builtins, and control explicitly whether or not impure
builtins are available (regardless of whether they're compiled in or
not).
To streamline the construction and allow the new API features to work,
this commit restructures things by making these changes:
1. The `tvix_eval::builtins` module is now only responsible for
exporting sets of builtins. It no longer has any knowledge of
whether or not certain sets (e.g. only pure, or pure+impure) are
enabled, and it has no control over which builtins are globally
available (this is now handled in the compiler).
2. The compiler module is now responsible for both constructing the
final attribute set of builtins from the set of builtins supplied
by a user, as well as for populating its globals (that is
identifiers which are available at the top-level scope).
3. The `Evaluation` API now carries a `builtins` field which is
populated with the pure builtins by default, and can be extended by
users.
4. The `import` feature has been moved into the compiler, as a
special case. In general, builtins no longer have the ability to
reference the "fix point" of the globals set.
This should not change any functionality, and in fact preserves minor
differences between Tvix/Nix that we already had (such as
`builtins.builtins` not existing).
Change-Id: Icdf5dd50eb81eb9260d89269d6e08b1e67811a2c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7738
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
It's been a while since the last time, so quite a lot of stuff has
accumulated here.
Change-Id: I0762827c197b30a917ff470fd8ae8f220f6ba247
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7597
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
This type carries the information required for calculating a
span (i.e. the chunk and offset), instead of the span itself. The span
is then only calculated in cases where it is required (when throwing
errors).
This reduces the eval time for
`builtins.length (builtins.attrNames (import <nixpkgs> {}))` by *one
third*!
The data structure in chunks that carries span information reduces
in-memory size by trading off the speed of retrieving span
information. This is because the span information is only actually
required when throwing errors (or emitting warnings).
However, somewhere along the way we grew a dependency on carrying span
information in thunks (for correctly reporting error chains). Hitting
the code paths for span retrieval was expensive, and carrying the
spans in a different way would still be less cache-efficient. This
change is the best tradeoff I could come up with.
Refs: b/229.
Change-Id: I27d4c4b5c5f9be90ac47f2db61941e123a78a77b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7558
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Instead of finding locals by doing 2x O(n) walks over the compiler's
locals list, use a secondary name-based index for resolving locals by
name.
Previously, almost 60% (!!) of eval time on some expressions over
nixpkgs was spent in `Local::has_name`. This function doesn't even
exist anymore now, and eval speed about doubles as a result.
Note that this doesn't exactly make the locals code easier to read,
but I'm also not sure what we can simplify in there in general.
This fixes b/227.
Change-Id: I29ce5eb9452b02d3b358c673e1f5cf8082e2fef9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7560
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I595087eff943d38a9fc78a83d37e207bb2ab79bc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7443
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Scope_depth and with_stack_depth were being reset to zero for nested
function abstractions. Fortunately nothing depends on them being
computed correctly in these cases, but it sure was confusing.
Change-Id: I59980b6a5aff043f60079f97211220b0086eb97d
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7091
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
It is very confusing that this opcode is called DataLocalIdx, but it
carries a StackIdx rather than a LocalIdx. It seems like this
really ought to be called DataStackIdx, but maybe I've
misunderstood; if so please explain it to me.
Change-Id: I91f6ffa759412beef0b91d3c19ec0d873fe51b99
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7088
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
If self.depth > other.depth then self is deeper than other, so self
is *below* other, not above it. Let's just inline the function.
Change-Id: I8dda3d90cbc86c8a6fa01bc4a5e506a2e403bd20
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7090
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
This commit contains two search-and-replace renames which are broken
out from I04131501029772f30e28da8281d864427685097f in order to
reduce the noise in that CL:
- `is_thunk -> is_suspended_thunk`, since there are now
OpThunkClosure and OpThunkSuspended
- `compile_lambda_or_thunk` -> `compile_lambda_or_suspension`
Change-Id: I7cc5bbb75ef6605e3428c7be27e812f41a10c127
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7037
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
CL/6867 added support for builtins.import, which required a cyclic
reference import->globals->builtins->import. This was implemented
using a RefCell, which makes it possible to mutate the builtins
during evaluation. The commit message for CL/6867 expressed a
desire to eliminate this possibility:
This opens up a potentially dangerous footgun in which we could
mutate the builtins at runtime leading to different compiler
invocations seeing different builtins, so it'd be nice to have
some kind of "finalised" status for them or some such, but I'm not
sure how to represent that atm.
This CL replaces the RefCell with Rc::new_cyclic(), making the
globals/builtins immutable once again. At VM runtime (once opcodes
start executing) everything is the same as before this CL, except
that the Rc<RefCell<>> introduced by CL/6867 is turned into an
rc::Weak<>.
The function passed to Rc::new_cyclic works very similarly to
overlays in nixpkgs: a function takes its own result as an argument.
However instead of laziness "breaking the cycle", Rust's
Rc::new_cyclic() instead uses an rc::Weak. This is done to prevent
memory leaks rather than divergence.
This CL also resolves the following TODO from CL/6867:
// TODO: encapsulate this import weirdness in builtins
The main disadvantage of this CL is the fact that the VM now must
ensure that it holds a strong reference to the globals while a
program is executing; failure to do so will cause a panic when the
weak reference in the builtins is upgrade()d.
In theory it should be possible to create strong reference cycles
the same way Rc::new_cyclic() creates weak cycles, but these cycles
would cause a permanent memory leak -- without either an rc::Weak or
RefCell there is no way to break the cycle. At some point we will
have to implement some form of cycle collection; whatever library we
choose for that purpose is likely to provide an "immutable strong
reference cycle" primitive similar to Rc::new_cyclic(), and we
should be able to simply drop it in.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I34bb5821628eb97e426bdb880b02e2097402adb7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7097
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This adds a comment noting that StackIdx is an offset relative to
the base of the current CallFrame, whereas UpvalueIdx is an absolute
index into the upvalues array.
It also removes the confusing mention of StackIdx in the descriptive
comment for LocalIdx. They index into totally different structures;
one exists at runtime and the other exists at compile time.
Change-Id: Ib932b1b0679734c15001e8c5c95a08293fa016b4
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7017
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
When compiling a lambda, take the name of the outer slot (if
available) and store it as the name on the lambda.
These names are then shown in the observer, and nowhere else (so far).
It is of course common for these things to thread through many
different context levels (e.g. `f = a: b: c: ...`), in this setup only
the outermost closure or thunk gains the name, but it's better than
nothing.
Change-Id: I681ba74e624f2b9e7a147144a27acf364fe6ccc7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7065
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
There are some rare scope cases with deferred access where this
doesn't behave correctly otherwise.
Change-Id: I6c774f5e62c1cb50b598026c54727017a52cd22d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7064
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
The warning needs to consider whether it is occuring inside of a
thunk, i.e. the dynamic ancestry chain of lambda contexts must be
inspected and not just the current scope.
Change-Id: I5cf5482d67a8bbb9f03b0ecee7a62f58754f8e59
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7063
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This check is now actually simply equivalent to checking whether the
target has been initialised or not.
Change-Id: I30660d11073ba313358f3a64234a90ed81abf74c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7062
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Checking the computed depth and stack slot against the computed depth
and stack slot is equivalent to just checking the indices into the
locals vector against each other (i.e. "is the slot we're compiling
into the slot we're accessing?")
Change-Id: Ie85a68df073e3b2e3d9aba7fe8634c48eada81fc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7059
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Failures to resolve a nix search path lookup in angle brackets can be
caught using tryEval (if it reaches the runtime). Resolving relative
paths (either to the current directory or the current user's home) can
never be caught, even if they happen inside a thunk at runtime (which is
currently the case for home-relative paths).
Change-Id: I7f73221df66d82a381dd4063358906257826995a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7025
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This commit deduplicates the Thunk-like functionality from Closure
and unifies it with Thunk.
Specifically, we now have one and only one way of breaking reference
cycles in the Value-graph: Thunk. No other variant contains a
RefCell. This should make it easier to reason about the behavior of
the VM. InnerClosure and UpvaluesCarrier are no longer necessary.
This refactoring allowed an improvement in code generation:
`Rc<RefCell<>>`s are now created only for closures which do not have
self-references or deferred upvalues, instead of for all closures.
OpClosure has been split into two separate opcodes:
- OpClosure creates non-recursive closures with no deferred
upvalues. The VM will not create an `Rc<RefCell<>>` when executing
this instruction.
- OpThunkClosure is used for closures with self-references or
deferred upvalues. The VM will create a Thunk when executing this
opcode, but the Thunk will start out already in the
`ThunkRepr::Evaluated` state, rather than in the
`ThunkRepr::Suspeneded` state.
To avoid confusion, OpThunk has been renamed OpThunkSuspended.
Thanks to @sterni for suggesting that all this could be done without
adding an additional variant to ThunkRepr. This does however mean
that there will be mutating accesses to `ThunkRepr::Evaluated`,
which was not previously the case. The field `is_finalised:bool`
has been added to `Closure` to ensure that these mutating accesses
are performed only on finalised Closures. Both the check and the
field are present only if `#[cfg(debug_assertions)]`.
Change-Id: I04131501029772f30e28da8281d864427685097f
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7019
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Without this change it was possible to cause situations (see the new
test) in which a `with`-namespace was forced prematurely.
Change-Id: I879ea7763b43edc693feace2c73c890d426fafd3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7031
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
|
|
Validate "closed formals" (formal parameters without an ellipsis) via a
new ValidateClosedFormals op, which checks the arguments (in an attr set
at the top of the stack) against the formal parameters on the Lambda in
the current frame, and returns a new UnexpectedArgument error (including
the span of the formals themselves!!) if any arguments aren't allowed
Change-Id: Idcc47a59167a83be1832a6229f137d84e426c56c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7002
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
In preparation for both implementing the `functionArgs` builtin and
adding support for validating closed formals, record information about
the formal arguments to a function *on the Lambda itself*. This may seem
a little odd for the purposes of just closed formal checking, but is
something we have to have anyway for builtins.functionArgs so I figured
I'd do it this way to kill both birds with one stone.
Change-Id: Ie3770a607bf352a1eb395c79ca29bb25d5978cd8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7001
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
This resolves a TODO.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: If4d2124648ac88094e547e1ad7f1b446feb26182
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7010
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Home relative paths depend on the environment to be resolved. We have
elected to do everything that depends on the environment, e.g. resolving
SPATH expressions using NIX_PATH, at runtime, so tvix evaluation would
continue to behave correctly even if we separated the compilation and
execution phases more, e.g. via serializing bytecode. Then the value of
HOME, NIX_PATH etc. could reasonably change in the time until execution,
yielding wrong results if the resolution results were cached in the
bytecode.
We also take the opportunity to fix the broken path concatenation
previously found in the compiler, fixing b/205.
Another thing we could consider is emitting a warning for home relative
path literals, as they are by nature relatively fragile.
One sideeffect of this change is that home path resolution errors
become catchable which is not the case in C++ Nix. This will need to be
fixed up in a subsequent change.
Change-Id: I30bd69b575667c49170a9fdea23a020565d0f9ec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7024
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
|
|
To assert that OpFindFile is only emitted for specially compiled SPATH
expressions, as well as make sure it doesn't accidentally operate on
“ordinary values”, introduce an UnresolvedPath internal value. If
OpFindFile sees a non-UnresolvedPath value, it'll crash.
Note that this change is not done purely for OpFindFile: We may want to
compile SPATH expressions as function calls to __findFile (like C++ Nix
does) in the future, so the UnresolvedPath value would definitely need
to be an ordinary string again then. Rather, this change is done in
preparation for resolving home dir relative paths at runtime (since they
depend on the environment) for which we'll need a similar mechanism to
OpFindFile.
Change-Id: I6acf287f35197cd9e13377079f972b9d36e5b22e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7023
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This path normalisation business causes runtime panics on WebAssembly
because those operations are unsupported.
Maybe this shouldn't be happening in the compiler anyways, not sure,
but for now this commit adds a workaround based on the target to
disable the normalisation if we're compiling for wasm.
Change-Id: I908a84fbdffc3401f8d443e2c73ec673e9f397ff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7004
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Cppnix immediately absolutizes pathnames at parse time; if you write
`./foo`, it is immediately converted to `$(pwd)/foo` and manipulated
as an absolute path at all times.
To avoid having to introduce filesystem access operations in the
implementation of otherwise-pure builtins, let's guarantee that the
`root_dir` of the VM is always an absolute path.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I7cbbae2cba4b2716ff3f5ff7c9ce0ad529358c8a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6995
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Right now we're pretending that the Rust library path_clean does the
same thing that cppnix's canonPath() does. This is not true. It's
close enough for the test suite, but may come back to bite us.
Let's create our own canon_path() function and call that in all the
places where we intend to match the behavior of cppnix's
canonPath(). That way when we fix this we can fix it once, in one
place.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ia6f9577f62f49ef352ff9cfa5efdf37c32d31b11
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6993
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Currently, the span on *all* thunk force errors is the span at which the
thunk is forced, which for recursive thunk forcing ends up just being
the same span over and over again. This changes the span on thunk force
errors to be the span at which point the thunk is *created*, which is a
bit more helpful (though the printing atm is a little... crowded). To
make this work, we have to thread through the span at which a thunk is
created into a field on the thunk itself.
Change-Id: I81474810a763046e2eb3a8f07acf7d8ec708824a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6932
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Since the body of an `if` expr can refer to deferred upvalues, it needs
to be thunked so when we actually compile those deferred upvalues we
have something for the finalize op to point at. Without this all sorts
of weird things can happen due to the finalize op being run in the wrong
lambda context, up to and including a panic.
Change-Id: I040d5e1a7232fd841cfa4953539898fa49cbbb83
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6929
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
This commit implements (lazy) resolution of `<...>` paths via either the
NIX_PATH environment variable, or the -I command-line flag - both
handled via EvalOptions. As a result, EvalOptions can no longer derive
Copy, meaning we have to clone it at each line of the repl - this is
probably not a huge deal as repl performance is not exactly an inner
loop and we're not cloning very much.
Internally, this works by creating a thunk which pushes a constant
containing the string inside the brackets to the stack, then a new
opcode to resolve that path via the `NixPath`. To get that opcode to
work, we now have to pass in the NixPath when constructing the VM.
This (intentionally) leaves out proper implementation of path resolution
via `findFile` (cppnix just calls whatever identifier called findFile is
in scope!!!) as that's widely considered a bit of a misfeature, but if
we do decide to implement that down the road it likely wouldn't be more
than a few extra ops within the thunk introduced here.
Change-Id: Ibc979b7e425b65cbe88599940520239a4a10cee2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6918
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
In order to behave nicely with tryEval, asserts need to leave the
instruction pointer in a reasonable place even if they fail - whereas
with the previous implementation catching a failed assert would still
end up running the op for the *body* of the assert. With this change, we
compile asserts much more like an `if` expression with conditional jumps
rather than having an OpAssert op.
Change-Id: I1b266c3be90185c84000da6b1995ac3e6fd5471b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6925
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
When contrasting the compilation of the desugared version to the
"sugared" version, this was the noticeable difference.
This fixes b/203.
Change-Id: Iae02ffc56e06de1de091b84cdc59d8fe83a17d69
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6898
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|