| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When compiling a lambda, take the name of the outer slot (if
available) and store it as the name on the lambda.
These names are then shown in the observer, and nowhere else (so far).
It is of course common for these things to thread through many
different context levels (e.g. `f = a: b: c: ...`), in this setup only
the outermost closure or thunk gains the name, but it's better than
nothing.
Change-Id: I681ba74e624f2b9e7a147144a27acf364fe6ccc7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7065
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
There are some rare scope cases with deferred access where this
doesn't behave correctly otherwise.
Change-Id: I6c774f5e62c1cb50b598026c54727017a52cd22d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7064
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This check is now actually simply equivalent to checking whether the
target has been initialised or not.
Change-Id: I30660d11073ba313358f3a64234a90ed81abf74c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7062
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Checking the computed depth and stack slot against the computed depth
and stack slot is equivalent to just checking the indices into the
locals vector against each other (i.e. "is the slot we're compiling
into the slot we're accessing?")
Change-Id: Ie85a68df073e3b2e3d9aba7fe8634c48eada81fc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7059
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Failures to resolve a nix search path lookup in angle brackets can be
caught using tryEval (if it reaches the runtime). Resolving relative
paths (either to the current directory or the current user's home) can
never be caught, even if they happen inside a thunk at runtime (which is
currently the case for home-relative paths).
Change-Id: I7f73221df66d82a381dd4063358906257826995a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7025
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This commit deduplicates the Thunk-like functionality from Closure
and unifies it with Thunk.
Specifically, we now have one and only one way of breaking reference
cycles in the Value-graph: Thunk. No other variant contains a
RefCell. This should make it easier to reason about the behavior of
the VM. InnerClosure and UpvaluesCarrier are no longer necessary.
This refactoring allowed an improvement in code generation:
`Rc<RefCell<>>`s are now created only for closures which do not have
self-references or deferred upvalues, instead of for all closures.
OpClosure has been split into two separate opcodes:
- OpClosure creates non-recursive closures with no deferred
upvalues. The VM will not create an `Rc<RefCell<>>` when executing
this instruction.
- OpThunkClosure is used for closures with self-references or
deferred upvalues. The VM will create a Thunk when executing this
opcode, but the Thunk will start out already in the
`ThunkRepr::Evaluated` state, rather than in the
`ThunkRepr::Suspeneded` state.
To avoid confusion, OpThunk has been renamed OpThunkSuspended.
Thanks to @sterni for suggesting that all this could be done without
adding an additional variant to ThunkRepr. This does however mean
that there will be mutating accesses to `ThunkRepr::Evaluated`,
which was not previously the case. The field `is_finalised:bool`
has been added to `Closure` to ensure that these mutating accesses
are performed only on finalised Closures. Both the check and the
field are present only if `#[cfg(debug_assertions)]`.
Change-Id: I04131501029772f30e28da8281d864427685097f
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7019
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Validate "closed formals" (formal parameters without an ellipsis) via a
new ValidateClosedFormals op, which checks the arguments (in an attr set
at the top of the stack) against the formal parameters on the Lambda in
the current frame, and returns a new UnexpectedArgument error (including
the span of the formals themselves!!) if any arguments aren't allowed
Change-Id: Idcc47a59167a83be1832a6229f137d84e426c56c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7002
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
In preparation for both implementing the `functionArgs` builtin and
adding support for validating closed formals, record information about
the formal arguments to a function *on the Lambda itself*. This may seem
a little odd for the purposes of just closed formal checking, but is
something we have to have anyway for builtins.functionArgs so I figured
I'd do it this way to kill both birds with one stone.
Change-Id: Ie3770a607bf352a1eb395c79ca29bb25d5978cd8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7001
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
This resolves a TODO.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: If4d2124648ac88094e547e1ad7f1b446feb26182
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7010
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Home relative paths depend on the environment to be resolved. We have
elected to do everything that depends on the environment, e.g. resolving
SPATH expressions using NIX_PATH, at runtime, so tvix evaluation would
continue to behave correctly even if we separated the compilation and
execution phases more, e.g. via serializing bytecode. Then the value of
HOME, NIX_PATH etc. could reasonably change in the time until execution,
yielding wrong results if the resolution results were cached in the
bytecode.
We also take the opportunity to fix the broken path concatenation
previously found in the compiler, fixing b/205.
Another thing we could consider is emitting a warning for home relative
path literals, as they are by nature relatively fragile.
One sideeffect of this change is that home path resolution errors
become catchable which is not the case in C++ Nix. This will need to be
fixed up in a subsequent change.
Change-Id: I30bd69b575667c49170a9fdea23a020565d0f9ec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7024
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
|
|
To assert that OpFindFile is only emitted for specially compiled SPATH
expressions, as well as make sure it doesn't accidentally operate on
“ordinary values”, introduce an UnresolvedPath internal value. If
OpFindFile sees a non-UnresolvedPath value, it'll crash.
Note that this change is not done purely for OpFindFile: We may want to
compile SPATH expressions as function calls to __findFile (like C++ Nix
does) in the future, so the UnresolvedPath value would definitely need
to be an ordinary string again then. Rather, this change is done in
preparation for resolving home dir relative paths at runtime (since they
depend on the environment) for which we'll need a similar mechanism to
OpFindFile.
Change-Id: I6acf287f35197cd9e13377079f972b9d36e5b22e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7023
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This path normalisation business causes runtime panics on WebAssembly
because those operations are unsupported.
Maybe this shouldn't be happening in the compiler anyways, not sure,
but for now this commit adds a workaround based on the target to
disable the normalisation if we're compiling for wasm.
Change-Id: I908a84fbdffc3401f8d443e2c73ec673e9f397ff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7004
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Cppnix immediately absolutizes pathnames at parse time; if you write
`./foo`, it is immediately converted to `$(pwd)/foo` and manipulated
as an absolute path at all times.
To avoid having to introduce filesystem access operations in the
implementation of otherwise-pure builtins, let's guarantee that the
`root_dir` of the VM is always an absolute path.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I7cbbae2cba4b2716ff3f5ff7c9ce0ad529358c8a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6995
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Right now we're pretending that the Rust library path_clean does the
same thing that cppnix's canonPath() does. This is not true. It's
close enough for the test suite, but may come back to bite us.
Let's create our own canon_path() function and call that in all the
places where we intend to match the behavior of cppnix's
canonPath(). That way when we fix this we can fix it once, in one
place.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ia6f9577f62f49ef352ff9cfa5efdf37c32d31b11
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6993
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Currently, the span on *all* thunk force errors is the span at which the
thunk is forced, which for recursive thunk forcing ends up just being
the same span over and over again. This changes the span on thunk force
errors to be the span at which point the thunk is *created*, which is a
bit more helpful (though the printing atm is a little... crowded). To
make this work, we have to thread through the span at which a thunk is
created into a field on the thunk itself.
Change-Id: I81474810a763046e2eb3a8f07acf7d8ec708824a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6932
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Since the body of an `if` expr can refer to deferred upvalues, it needs
to be thunked so when we actually compile those deferred upvalues we
have something for the finalize op to point at. Without this all sorts
of weird things can happen due to the finalize op being run in the wrong
lambda context, up to and including a panic.
Change-Id: I040d5e1a7232fd841cfa4953539898fa49cbbb83
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6929
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
This commit implements (lazy) resolution of `<...>` paths via either the
NIX_PATH environment variable, or the -I command-line flag - both
handled via EvalOptions. As a result, EvalOptions can no longer derive
Copy, meaning we have to clone it at each line of the repl - this is
probably not a huge deal as repl performance is not exactly an inner
loop and we're not cloning very much.
Internally, this works by creating a thunk which pushes a constant
containing the string inside the brackets to the stack, then a new
opcode to resolve that path via the `NixPath`. To get that opcode to
work, we now have to pass in the NixPath when constructing the VM.
This (intentionally) leaves out proper implementation of path resolution
via `findFile` (cppnix just calls whatever identifier called findFile is
in scope!!!) as that's widely considered a bit of a misfeature, but if
we do decide to implement that down the road it likely wouldn't be more
than a few extra ops within the thunk introduced here.
Change-Id: Ibc979b7e425b65cbe88599940520239a4a10cee2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6918
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
In order to behave nicely with tryEval, asserts need to leave the
instruction pointer in a reasonable place even if they fail - whereas
with the previous implementation catching a failed assert would still
end up running the op for the *body* of the assert. With this change, we
compile asserts much more like an `if` expression with conditional jumps
rather than having an OpAssert op.
Change-Id: I1b266c3be90185c84000da6b1995ac3e6fd5471b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6925
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
This is also useful for error-handling related logic, outside of just
the compiler module.
Change-Id: I5c386e2b4c31cda0a0209b31136ca07f00e39e45
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6869
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Adding `import` to builtins causes causes a bootstrap cycle because
the `import` builtin needs to be initialised with the set of globals
before being inserted into the globals, which also must contain
itself.
To break out of the cycle this hack wraps the builtins passed to the
compiler in an `Rc` (probably sensible anyways, as they will end up
getting cloned a bunch), containing a RefCell which gives us mutable
access to the builtins.
This opens up a potentially dangerous footgun in which we could mutate
the builtins at runtime leading to different compiler invocations
seeing different builtins, so it'd be nice to have some kind of
"finalised" status for them or some such, but I'm not sure how to
represent that atm.
Change-Id: I25f8d4d2a7e8472d401c8ba2f4bbf9d86ab2abcb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6867
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
There's basically nothing that needs *ownership* of an AST
node (which is just a little box full of references to other things
anyways), so we can thread this through as references all the way.
Change-Id: I35a1348a50c0e8e07d51dfc18847829379166fbf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6853
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
There are actually two different types of observers, the ones that
observe the compiler (and emitted chunks from different kinds of
expressions), and the ones that trace runtime execution.
Use of the NoOpObserver is unchanged, it simply implements both
traits.
Change-Id: I4277b82674c259ec55238a0de3bb1cdf5e21a258
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6852
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This needs to move here so that we can reuse compile_bindings for the
nested attribute sets we're about to start constructing.
Change-Id: Ie83f52f7e1d128886e96a1da47792211fa826f21
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6796
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I28d6af8cb408f8427a75d30b9120aaa809a1ea40
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6784
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
As of this commit, all three types of bindings scopes are compiled the
same way (i.e. compilation of non-recursive attribute sets has been
switched over to the new code paths).
This sets us up for doing the final implementation of nested attribute
sets.
HOWEVER, this breaks the existing implementation of nested attributes
in non-recursive attribute sets. That implementation is flawed and
unworkable in practice, so we need to do this dance to be able to
implement it correctly.
Change-Id: Iba2545c0d1d6b51f5e1a31a5d005b8d01da546d3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6782
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Changes the module structure of the compiler to have a module
dedicated to the logic of setting up bindings. This logic is in the
process of being merged between attribute sets and `let`-expressions,
and the structure of the modules makes more sense when ecapsulating
that specifically.
(Other bits of code related to e.g. attribute sets are pretty
straightforward and can just live in the main compiler module).
Change-Id: I9469b73a7034e5b5f3bb211694d97260c4c9ef54
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6766
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
The previous version had a bug where we assumed that the number of
entries in an attribute set AST node would be equivalent to the number
of entries in the runtime attribute set, but due to inherit nodes
containing a variable number of entries, this did not work out.
Fixes b/199
Change-Id: I6f7f7729f3512b297cf29a2e046302ca28477854
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6749
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This updates rnix-parser to a version where inherits provide an
iterator over `ast::Attr` instead of `ast::Ident`, which mirrors the
behaviour of Nix (inherits can have (statically known) strings as
their identifiers).
This actually required some fairly significant code reshuffling in the
compiler, as there was an implicit assumption in many places that we
would have an `ast::Ident` node available when dealing with variable
access (which is then explicitly only not true in this case).
Change-Id: I12f1e786c0030c85107b1aa409bd49adb5465546
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6747
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I6b9283d16447c83dd3978371d9a6ac1beb985926
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6657
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Change-Id: I3ad2234e8a8e4280e498c6d7af8ea0733ed4c7ea
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6699
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
This disconnects ownership of the `File` reference in a compiler from
the calling scope, which is required for when we implement `import`.
`import` will need to carry an `Rc<RefCell<CodeMap>>` (or maybe, in
the future, Arc) to give us the ability to add new detected code
files at runtime.
Note that the choice of `Arc` over `Rc` here is not ours - it's the
codemap crate's.
Change-Id: I3aeca4ffc167acbd1701846a332d93550b56ba7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6630
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Invalid integers (eg integers that're too long) end up as error returns
on the `.value()` returned from the literal in the AST - previously we'd
unwrap this error, causing it to panic the compiler, but now we've got a
nice error variant for it (which just unwraps the underlying
std::num::ParseIntError).
Change-Id: I50c3c5ba89407d86659e20d8991b9658415f39a0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6635
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Suggested by sterni in cl/6231
Change-Id: I58bbc8a922d360ea79a4dacb76cf8aa1fad93757
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6622
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
... it would be nice if we could thread it through to the `Scope`
stuff (declaring phantoms & locals).
Change-Id: Id3b84e79032b8fbb12138b719e657565355fbc79
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6616
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This trait can be used to convert most structures from rnix-parser
into a codemap::Span. It uses a macro to implement the trait for the
various expression types in the rnix AST, as Rust's silly semantic
versioning restriction stops us from doing a blanket implementation.
This will be used in the next commit to clean up the span handling in
the compiler a bit.
Change-Id: I0a437034e5fa203b5a49c6f25c45932a9f3b2bca
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6615
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
... and emit a warning if anyone decides to use.
Change-Id: Iaa6fe9fa932340e6d0fa9f357155e78823702576
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6611
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Yep.
This is kind of ugly right now. The idea is that the recursive_scope
compilation function is used for recursive sets as well by emitting
the keys. The rest of the logic is pretty much identical.
There is quite a lot of code here that can be cleaned up (duplication
between attrs and let, duplication inside of the recursive scope
compilation function etc.), but I'd like to get it working first and
then make it nice.
Note that nested keys are *not* supported yet.
Change-Id: I45c7cdd5f0e1d35fd94797093904740af3a97134
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6610
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This type is used in the list temporarily populated by the *second*
pass over all identifiers in a recursive scope. This first pass only
serves to make all bindings known to the compiler, without populating
their values yet.
Having a type here is going to be useful once we implement `rec`,
which needs to thread through slightly more information.
Change-Id: Ie33e0f096c5fcb6c864c991255466748b6f0d1eb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6609
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This needs to be reused between let & `rec` attrs.
Change-Id: I4a3bb90af4be32771b0f9e405c19370e105c0fef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6608
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Plain move, no other changes.
Change-Id: Ic4f89709f5c2cbc03182a848af080c820e39a0fd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6607
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This makes the phases of attribute set construction that Nix has very
explicit (inherits, static keys, dynamic keys).
This change focuses on the split between dynamic/static keys by
collecting all dynamic ones while compiling the static ones, and then
phasing them in afterwards. It's possible we also need to do some
additional splitting inside of the inherits.
Change-Id: Icae782e2a5c106e3ce0831dda47ed81c923c0a42
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6530
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This allows us to get rid of the count local variable which was a bit
confusing. Calling parts.len() multiple times is fine, since the length
doesn't need to be computed.
Change-Id: I4f626729ad1bf23a93cb701385c3f4b50c57456d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6584
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
With this puzzle piece of string compilation in place, `compile_str`
becomes less redundant, as every part now needs to be compiled the same.
The thunking logic becomes a bit trickier, since we need to thunk even
in the case of `count == 1` if the single part is interpolating.
Splitting the inner (shared) code in a separate function turned out to
be easier for making rustc content.
Change-Id: I6a554ca599926ae5907d7acffce349c9616f568f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6582
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
If we have multiple string parts, we need to thunk assembling the
string. If we have a single literal, it is strict (like all literals),
but a single interpolation part may compile to a thunk, depending on how
the expression inside is compiled – we can avoid forcing to early here
compared to the previous behavior.
Note that this CL retains the bug that `"${x}"` is erroneously
translated to `x`, implying e.g. `"${12}" == 12`.
The use of `parts.len()` is unproblematic, since normalized_parts()
builds a `Vec` instead of returning an iterator.
Change-Id: I3aecbfefef65cc627b1b8a65be27cbaeada3582b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6580
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
The expression inside ${…} may return arbitrary values, including
thunks, so we need to make sure to force them just in case.
Change-Id: Ic11ba00c4c92a10a83becd91233db5f57f6e59c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6541
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Pointed out by sterni in cl/6395
Change-Id: I2dda2bb11fef702df05fd7a4fd93b9e717a85dad
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6567
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This is more useful than pointing it at the entire assert expression,
as that includes the body as well which is not going to be relevant in
the error.
Pointed out by sterni in cl/6391
Change-Id: I95a5d1edf90df65e7fa53d4d04502afd6e99e89a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6566
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This field no longer needs to be directly accessible by the compiler.
Addresses a sterni lint from cl/6466
Change-Id: I5e6791943d7f0ab3d9b7a30bb1654c4a6a435b1f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6564
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This very closely follows the way it's done for warnings, but errors
have a lot more information available in some cases which we do not
surface yet.
Note also that due to requiring the `CodeMap`, this is not yet called
from eval.rs as the way that is threaded through needs to be
refactored, so only the method for reporting these errors as strings
is implemented so far.
Next steps for this will be to add a generic diagnostics module that
reduces some of the boilerplate for this between warnings & errors,
and which will also give us a good point in the future to switch to a
fancier diagnostics crate.
Change-Id: If6bb209f8e7a568d866e516a90335b9b2afbf66d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6534
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I76326c20a525044e89d3cd1392a29faa3414ca04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6529
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
