diff options
Diffstat (limited to 'web/tvl')
| -rw-r--r-- | web/tvl/blog/2024-08-tvix-update.md | 266 | ||||
| -rw-r--r-- | web/tvl/blog/default.nix | 7 |
2 files changed, 273 insertions, 0 deletions
diff --git a/web/tvl/blog/2024-08-tvix-update.md b/web/tvl/blog/2024-08-tvix-update.md new file mode 100644 index 000000000000..0305f9050661 --- /dev/null +++ b/web/tvl/blog/2024-08-tvix-update.md @@ -0,0 +1,266 @@ +It's already been around half a year since +[the last Tvix update][2024-02-tvix-update], so time for another one! + +Note: This blog post is intended for a technical audience that is already +intimately familiar with Nix, and knows what things like derivations or store +paths are. If you're new to Nix, this will not make a lot of sense to you! + +## Builds +A long-term goal is obviously to be able to use the expressions in nixpkgs to +build things with Tvix. We made progress on many places towards that goal: + +### Drive builds on IO +As already explained in our [first blog post][blog-rewriting-nix], in Tvix, we +want to make IFD a first-class citizen without significant perf cost. + +Nix tries hard to split Evaluation and Building into two phases, visible in +the `nix-instantiate` command which produces `.drv` files in `/nix/store` and +the `nix-build` command which can be invoked on such `.drv` files without +evaluation. +Scheduling (like in Hydra) usually happens by walking the graph of `.drv` files +produced in the first phase. + +As soon as there's some IFD along the path, everything until then gets built in +the Evaluator (which is why IFD is prohibited in nixpkgs). + +Tvix does not have two separate "phases" in a build, only a graph of unfinished +Derivations/Builds and their associated store paths. This graph does not need +to be written to disk, and can grow during runtime, as new Derivations with new +output paths are discovered. + +Build scheduling happens continuously with that graph, for everything that's +really needed, when it's needed. + +We do this by only "forcing" the realization of a specific store path if the +user ultimately wants that specific result to be available on their system, and +transitively, if something else wants it. This includes IFD in a very elegant +way. + +We want to play with this approach as we continue on bringing our build +infrastructure up. + +### Fetchers +There's a few Nix builtins that allow describing a fetch (be it download of a +file from the internet, clone of a git repo). These needed to be implemented +for completeness. We implemented pretty much all downloads of Tarballs, NARs and +plain files, except git repositories, which are left for later. + +Instead of doing these fetches immediately, we added a generic `Fetch` struct +that allows describing such fetches *before actually doing them*, similar to +being able to describe builds, and use the same "Drive builds on IO" machinery +to delay these fetches to the point where it's needed. We also show progress +bars when doing fetches. + +Very early, during bootstrapping, nixpkgs relies on some `builtin:fetchurl` +"fake" Derivation, which has some special handling logic in Nix. We implemented +these quirks, by converting it to our generic `Fetch` struct and dealing with +it there in a consistent fashion. + +### More fixes, Refscan +With the above work done, and after fixing some small bugs [^3], we were already +able to build some first few store paths with Tvix and our `runc`-based builder +🎉! + +We didn't get too far though, as we still need to implement reference scanning, +so that's next on our TODO list for here. Stay tuned for further updates there! + +## Eval correctness & Performance +As already written in the previous update, we've been evaluating parts of +`nixpkgs` and ensuring we produce the same derivations. We managed to find and +fix some correctness issues there. + +Even though we don't want to focus too much on performance improvements +until all features of Nix are properly understood and representable with our +architecture, there's been some work on removing some obvious and low-risk +performance improvements. Expect a detailed blog post around that soon after +this one! + +## Tracing / O11Y Support +Tvix got support for Tracing, and is able to emit spans in +[OpenTelemetry][opentelemetry]-compatible format. + +This means, if the necessary tooling is set up to collect such spans [^1], it's +possible to see what's happening inside the different components of Tvix across +process (and machine) boundaries. + +Tvix now also propagates trace IDs via gRPC and HTTP requests [^2], and +continues them if receiving such ones. + +As an example, this allows us to get "callgraphs" on how a tvix-store operation +is processed through a multi-node deployment, and find bottlenecks and places to +optimize performance for. + +Currently, this is compiled in by default, trying to send traces to an endpoint +at `localhost` (as per the official [SDK defaults][otlp-sdk]). It can +be disabled by building without the `otlp` feature, or running with the +`--otlp=false` CLI flag. + +This piggy-backs on the excellent [tracing][tracing-rs] crate, which we already +use for structured logging, so while at it, we improved some log messages and +fields to make it easier to filter for certain types of events. + +We also added support for sending out [Tracy][tracy] traces, though these are +disabled by default. + +Additionally, some CLI entrypoints can now report progress to the user! +For example, when we're fetching something during evaluation +(via `builtins.fetchurl`), or uploading store path contents, we can report on +this. See [here][asciinema-import] for an example. + +We're still considering these outputs as early prototypes, and will refine them as +we go. + +## tvix-castore ingestion generalization +We spent some time refactoring and generalizing tvix-castore importer code. + +It's now generalized on a stream of "ingestion entries" produced in a certain +order, and there's various producers of this stream (reading through the local +filesystem, reading through a NAR, reading through a tarball, soon: traversing +contents of a git repo, …). + +This prevented a lot of code duplication for these various formats, and allows +pulling out helper code for concurrent blob uploading. + +## More tvix-[ca]store backends +We added some more store backends to Tvix: + + - There's a [redb][redb] `PathInfoService` and `DirectoryService`, which + also replaced the previous `sled` default backend. + - There's a [bigtable][bigtable] `PathInfoService` and `DirectoryService` + backend. + - The "simplefs" `BlobService` has been removed, as it can be expressed using + the "objectstore" backend with a `file://` URI. + - There's been some work on feature-flagging certain backends. + +## Documentation reconcilation +Various bits and pieces of documentation have previously been scattered +throughout the Tvix codebase, which wasn't very accessible and quite confusing. + +These have been consolidated into a mdbook (at `//tvix/docs`). + +We plan to properly host these as a website, hopefully providing a better introduction +and overview of Tvix, while adding more content over time. + +## `nar-bridge` RIIR +While the golang implementation of `nar-bridge` did serve us well for a while, +it being the only remaining non-Rust part was a bit annoying. + +Adding some features there meant they would not be accessible in the rest of +Tvix - and the other way round. +Also, we could not open data stores directly from there, but always had to start +a separate `tvix-store daemon`. + +The initial plans for the Rust rewrite were already made quite a while ago, +but we finally managed to finish implementing the remaining bits. `nar-bridge` +is now fully written in Rust, providing the same CLI experience features and +store backends as the rest of Tvix. + +## `crate2nix` and overall rust Nix improvements +We landed some fixes in [crate2nix][crate2nix], the tool we're using to for +per-crate incremental builds of Tvix. + +It now supports the corner cases needed to build WASM - so now [Tvixbolt] +[tvixbolt] is built with it, too. + +We also fixed some bugs in how test directories are prepared, which unlocked +running some more tests for filesystem related builtins such as `readDir` in our test suite. + +Additionally, there has been some general improvements around ensuring various +combinations of Tvix feature flags build (now continuously checked by CI), and +reducing the amount of unnecessary rebuilds, by filtering non-sourcecode files +before building. + +These should all improve DX while working on Tvix. + +## Store Composition +Another big missing feature that landed was Store Composition. We briefly spoke +about the Tvix Store Model in the last update, but we didn't go into too much +detail on how that'd work in case there's multiple potential sources for a store +path or some more granular contents (which is pretty much always the case +normally, think about using things from your local store OR then falling back to +a remote place). + +Nix has the default model of using `/nix/store` with a sqlite database for +metadata as a local store, and one or multiple "subsituters" using the Nix HTTP +Binary Cache protocol. + +In Tvix, things need to be a bit more flexible: + - You might be in a setting where you don't have a local `/nix/store` at all. + - You might want to have a view of different substituters/binary caches for + different users. + - You might want to explicitly specify caches in between some of these layers, + and control their config. + +The idea in Tvix is that you'll be able to combine "hierarchies of stores" through +runtime configuration to express all this. + +It's currently behind a `xp-store-composition` feature flag, which adds the +optional `--experimental-store-composition` CLI arg, pointing to a TOML file +specifying the composition configuration. If set, this has priority over the old +CLI args for the three (single) stores. + +We're still not 100% sure how to best expose this functionality, in terms of the +appropriate level of granularity, in a user-friendly format. + +There's also some more combinators and refactors missing, but please let us +know your thoughts! + +## Contributors +There's been a lot of progress, which would not have been possible without our +contributors! Be it a small drive-by contributions, or large efforts, thank +you all! + + - Adam Joseph + - Alice Carroll + - Aspen Smith + - Ben Webb + - binarycat + - Brian Olsen + - Connor Brewster + - Daniel Mendler + - edef + - Edwin Mackenzie-Owen + - espes + - Farid Zakaria + - Florian Klink + - Ilan Joselevich + - Luke Granger-Brown + - Markus Rudy + - Matthew Tromp + - Moritz Sanft + - Padraic-O-Mhuiris + - Peter Kolloch + - Picnoir + - Profpatsch + - Ryan Lahfa + - Simon Hauser + - sinavir + - sterni + - Steven Allen + - tcmal + - toastal + - Vincent Ambo + - Yureka + +--- + +That's it again, try out Tvix and hit us up on IRC or on our mailing list if you +run into any snags, or have any questions. + + +[^1]: Essentially, deploying a collecting agent on your machines, accepting + these traces. +[^2]: Using the `traceparent` header field from https://www.w3.org/TR/trace-context/#trace-context-http-headers-format +[^3]: like `builtins.toFile` not adding files yet, or `inputSources` being missed initially, duh!) + +[2024-02-tvix-update]: https://tvl.fyi/blog/tvix-update-february-24 +[opentelemetry]: https://opentelemetry.io/ +[otlp-sdk]: https://opentelemetry.io/docs/languages/sdk-configuration/otlp-exporter/ +[tracing-rs]: https://tracing.rs/ +[tracy]: https://github.com/wolfpld/tracy +[asciinema-import]: https://asciinema.org/a/Fs4gKTFFpPGYVSna0xjTPGaNp +[blog-rewriting-nix]: https://tvl.fyi/blog/rewriting-nix +[crate2nix]: https://github.com/nix-community/crate2nix +[redb]: https://github.com/cberner/redb +[bigtable]: https://cloud.google.com/bigtable +[tvixbolt]: https://bolt.tvix.dev/ diff --git a/web/tvl/blog/default.nix b/web/tvl/blog/default.nix index 2a1dfe85cc63..966be083b3d3 100644 --- a/web/tvl/blog/default.nix +++ b/web/tvl/blog/default.nix @@ -31,5 +31,12 @@ content = ./2024-02-tvix-update.md; author = "flokli"; } + { + key = "tvix-update-august-24"; + title = "Tvix Status - August '24"; + date = 1723219370; + content = ./2024-08-tvix-update.md; + author = "flokli"; + } ]; } |