1 files changed, 0 insertions, 348 deletions
diff --git a/third_party/git/git-bisect.sh b/third_party/git/git-bisect.sh
deleted file mode 100755
index efee12b8b1..0000000000
--- a/third_party/git/git-bisect.sh
+++ /dev/null
@@ -1,348 +0,0 @@
-#!/bin/sh
-
-USAGE='[help|start|bad|good|new|old|terms|skip|next|reset|visualize|view|replay|log|run]'
-LONG_USAGE='git bisect help
-	print this long help message.
-git bisect start [--term-{old,good}=<term> --term-{new,bad}=<term>]
-		 [--no-checkout] [<bad> [<good>...]] [--] [<pathspec>...]
-	reset bisect state and start bisection.
-git bisect (bad|new) [<rev>]
-	mark <rev> a known-bad revision/
-		a revision after change in a given property.
-git bisect (good|old) [<rev>...]
-	mark <rev>... known-good revisions/
-		revisions before change in a given property.
-git bisect terms [--term-good | --term-bad]
-	show the terms used for old and new commits (default: bad, good)
-git bisect skip [(<rev>|<range>)...]
-	mark <rev>... untestable revisions.
-git bisect next
-	find next bisection to test and check it out.
-git bisect reset [<commit>]
-	finish bisection search and go back to commit.
-git bisect (visualize|view)
-	show bisect status in gitk.
-git bisect replay <logfile>
-	replay bisection log.
-git bisect log
-	show bisect log.
-git bisect run <cmd>...
-	use <cmd>... to automatically bisect.
-
-Please use "git help bisect" to get the full man page.'
-
-OPTIONS_SPEC=
-. git-sh-setup
-
-_x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
-_x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
-TERM_BAD=bad
-TERM_GOOD=good
-
-bisect_head()
-{
-	if test -f "$GIT_DIR/BISECT_HEAD"
-	then
-		echo BISECT_HEAD
-	else
-		echo HEAD
-	fi
-}
-
-bisect_autostart() {
-	test -s "$GIT_DIR/BISECT_START" || {
-		gettextln "You need to start by \"git bisect start\"" >&2
-		if test -t 0
-		then
-			# TRANSLATORS: Make sure to include [Y] and [n] in your
-			# translation. The program will only accept English input
-			# at this point.
-			gettext "Do you want me to do it for you [Y/n]? " >&2
-			read yesno
-			case "$yesno" in
-			[Nn]*)
-				exit ;;
-			esac
-			bisect_start
-		else
-			exit 1
-		fi
-	}
-}
-
-bisect_start() {
-	git bisect--helper --bisect-start $@ || exit
-
-	#
-	# Change state.
-	# In case of mistaken revs or checkout error, or signals received,
-	# "bisect_auto_next" below may exit or misbehave.
-	# We have to trap this to be able to clean up using
-	# "bisect_clean_state".
-	#
-	trap 'git bisect--helper --bisect-clean-state' 0
-	trap 'exit 255' 1 2 3 15
-
-	#
-	# Check if we can proceed to the next bisect state.
-	#
-	get_terms
-	bisect_auto_next
-
-	trap '-' 0
-}
-
-bisect_skip() {
-	all=''
-	for arg in "$@"
-	do
-		case "$arg" in
-		*..*)
-			revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;;
-		*)
-			revs=$(git rev-parse --sq-quote "$arg") ;;
-		esac
-		all="$all $revs"
-	done
-	eval bisect_state 'skip' $all
-}
-
-bisect_state() {
-	bisect_autostart
-	state=$1
-	git bisect--helper --check-and-set-terms $state $TERM_GOOD $TERM_BAD || exit
-	get_terms
-	case "$#,$state" in
-	0,*)
-		die "Please call 'bisect_state' with at least one argument." ;;
-	1,"$TERM_BAD"|1,"$TERM_GOOD"|1,skip)
-		bisected_head=$(bisect_head)
-		rev=$(git rev-parse --verify "$bisected_head") ||
-			die "$(eval_gettext "Bad rev input: \$bisected_head")"
-		git bisect--helper --bisect-write "$state" "$rev" "$TERM_GOOD" "$TERM_BAD" || exit
-		git bisect--helper --check-expected-revs "$rev" ;;
-	2,"$TERM_BAD"|*,"$TERM_GOOD"|*,skip)
-		shift
-		hash_list=''
-		for rev in "$@"
-		do
-			sha=$(git rev-parse --verify "$rev^{commit}") ||
-				die "$(eval_gettext "Bad rev input: \$rev")"
-			hash_list="$hash_list $sha"
-		done
-		for rev in $hash_list
-		do
-			git bisect--helper --bisect-write "$state" "$rev" "$TERM_GOOD" "$TERM_BAD" || exit
-		done
-		git bisect--helper --check-expected-revs $hash_list ;;
-	*,"$TERM_BAD")
-		die "$(eval_gettext "'git bisect \$TERM_BAD' can take only one argument.")" ;;
-	*)
-		usage ;;
-	esac
-	bisect_auto_next
-}
-
-bisect_auto_next() {
-	git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD && bisect_next || :
-}
-
-bisect_next() {
-	case "$#" in 0) ;; *) usage ;; esac
-	bisect_autostart
-	git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD $TERM_GOOD|| exit
-
-	# Perform all bisection computation, display and checkout
-	git bisect--helper --next-all $(test -f "$GIT_DIR/BISECT_HEAD" && echo --no-checkout)
-	res=$?
-
-	# Check if we should exit because bisection is finished
-	if test $res -eq 10
-	then
-		bad_rev=$(git show-ref --hash --verify refs/bisect/$TERM_BAD)
-		bad_commit=$(git show-branch $bad_rev)
-		echo "# first $TERM_BAD commit: $bad_commit" >>"$GIT_DIR/BISECT_LOG"
-		exit 0
-	elif test $res -eq 2
-	then
-		echo "# only skipped commits left to test" >>"$GIT_DIR/BISECT_LOG"
-		good_revs=$(git for-each-ref --format="%(objectname)" "refs/bisect/$TERM_GOOD-*")
-		for skipped in $(git rev-list refs/bisect/$TERM_BAD --not $good_revs)
-		do
-			skipped_commit=$(git show-branch $skipped)
-			echo "# possible first $TERM_BAD commit: $skipped_commit" >>"$GIT_DIR/BISECT_LOG"
-		done
-		exit $res
-	fi
-
-	# Check for an error in the bisection process
-	test $res -ne 0 && exit $res
-
-	return 0
-}
-
-bisect_visualize() {
-	git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD fail || exit
-
-	if test $# = 0
-	then
-		if test -n "${DISPLAY+set}${SESSIONNAME+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" &&
-			type gitk >/dev/null 2>&1
-		then
-			set gitk
-		else
-			set git log
-		fi
-	else
-		case "$1" in
-		git*|tig) ;;
-		-*)	set git log "$@" ;;
-		*)	set git "$@" ;;
-		esac
-	fi
-
-	eval '"$@"' --bisect -- $(cat "$GIT_DIR/BISECT_NAMES")
-}
-
-bisect_replay () {
-	file="$1"
-	test "$#" -eq 1 || die "$(gettext "No logfile given")"
-	test -r "$file" || die "$(eval_gettext "cannot read \$file for replaying")"
-	git bisect--helper --bisect-reset || exit
-	while read git bisect command rev
-	do
-		test "$git $bisect" = "git bisect" || test "$git" = "git-bisect" || continue
-		if test "$git" = "git-bisect"
-		then
-			rev="$command"
-			command="$bisect"
-		fi
-		get_terms
-		git bisect--helper --check-and-set-terms "$command" "$TERM_GOOD" "$TERM_BAD" || exit
-		get_terms
-		case "$command" in
-		start)
-			cmd="bisect_start $rev"
-			eval "$cmd" ;;
-		"$TERM_GOOD"|"$TERM_BAD"|skip)
-			git bisect--helper --bisect-write "$command" "$rev" "$TERM_GOOD" "$TERM_BAD" || exit;;
-		terms)
-			git bisect--helper --bisect-terms $rev || exit;;
-		*)
-			die "$(gettext "?? what are you talking about?")" ;;
-		esac
-	done <"$file"
-	bisect_auto_next
-}
-
-bisect_run () {
-	git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD fail || exit
-
-	test -n "$*" || die "$(gettext "bisect run failed: no command provided.")"
-
-	while true
-	do
-		command="$@"
-		eval_gettextln "running \$command"
-		"$@"
-		res=$?
-
-		# Check for really bad run error.
-		if [ $res -lt 0 -o $res -ge 128 ]
-		then
-			eval_gettextln "bisect run failed:
-exit code \$res from '\$command' is < 0 or >= 128" >&2
-			exit $res
-		fi
-
-		# Find current state depending on run success or failure.
-		# A special exit code of 125 means cannot test.
-		if [ $res -eq 125 ]
-		then
-			state='skip'
-		elif [ $res -gt 0 ]
-		then
-			state="$TERM_BAD"
-		else
-			state="$TERM_GOOD"
-		fi
-
-		# We have to use a subshell because "bisect_state" can exit.
-		( bisect_state $state >"$GIT_DIR/BISECT_RUN" )
-		res=$?
-
-		cat "$GIT_DIR/BISECT_RUN"
-
-		if sane_grep "first $TERM_BAD commit could be any of" "$GIT_DIR/BISECT_RUN" \
-			>/dev/null
-		then
-			gettextln "bisect run cannot continue any more" >&2
-			exit $res
-		fi
-
-		if [ $res -ne 0 ]
-		then
-			eval_gettextln "bisect run failed:
-'bisect_state \$state' exited with error code \$res" >&2
-			exit $res
-		fi
-
-		if sane_grep "is the first $TERM_BAD commit" "$GIT_DIR/BISECT_RUN" >/dev/null
-		then
-			gettextln "bisect run success"
-			exit 0;
-		fi
-
-	done
-}
-
-bisect_log () {
-	test -s "$GIT_DIR/BISECT_LOG" || die "$(gettext "We are not bisecting.")"
-	cat "$GIT_DIR/BISECT_LOG"
-}
-
-get_terms () {
-	if test -s "$GIT_DIR/BISECT_TERMS"
-	then
-		{
-		read TERM_BAD
-		read TERM_GOOD
-		} <"$GIT_DIR/BISECT_TERMS"
-	fi
-}
-
-case "$#" in
-0)
-	usage ;;
-*)
-	cmd="$1"
-	get_terms
-	shift
-	case "$cmd" in
-	help)
-		git bisect -h ;;
-	start)
-		bisect_start "$@" ;;
-	bad|good|new|old|"$TERM_BAD"|"$TERM_GOOD")
-		bisect_state "$cmd" "$@" ;;
-	skip)
-		bisect_skip "$@" ;;
-	next)
-		# Not sure we want "next" at the UI level anymore.
-		bisect_next "$@" ;;
-	visualize|view)
-		bisect_visualize "$@" ;;
-	reset)
-		git bisect--helper --bisect-reset "$@" ;;
-	replay)
-		bisect_replay "$@" ;;
-	log)
-		bisect_log ;;
-	run)
-		bisect_run "$@" ;;
-	terms)
-		git bisect--helper --bisect-terms "$@" || exit;;
-	*)
-		usage ;;
-	esac
-esac