diff options
Diffstat (limited to 'third_party/git/Documentation/git-worktree.txt')
| -rw-r--r-- | third_party/git/Documentation/git-worktree.txt | 382 |
1 files changed, 0 insertions, 382 deletions
diff --git a/third_party/git/Documentation/git-worktree.txt b/third_party/git/Documentation/git-worktree.txt deleted file mode 100644 index 85d92c9761..0000000000 --- a/third_party/git/Documentation/git-worktree.txt +++ /dev/null @@ -1,382 +0,0 @@ -git-worktree(1) -=============== - -NAME ----- -git-worktree - Manage multiple working trees - - -SYNOPSIS --------- -[verse] -'git worktree add' [-f] [--detach] [--checkout] [--lock] [-b <new-branch>] <path> [<commit-ish>] -'git worktree list' [--porcelain] -'git worktree lock' [--reason <string>] <worktree> -'git worktree move' <worktree> <new-path> -'git worktree prune' [-n] [-v] [--expire <expire>] -'git worktree remove' [-f] <worktree> -'git worktree unlock' <worktree> - -DESCRIPTION ------------ - -Manage multiple working trees attached to the same repository. - -A git repository can support multiple working trees, allowing you to check -out more than one branch at a time. With `git worktree add` a new working -tree is associated with the repository. This new working tree is called a -"linked working tree" as opposed to the "main working tree" prepared by "git -init" or "git clone". A repository has one main working tree (if it's not a -bare repository) and zero or more linked working trees. When you are done -with a linked working tree, remove it with `git worktree remove`. - -If a working tree is deleted without using `git worktree remove`, then -its associated administrative files, which reside in the repository -(see "DETAILS" below), will eventually be removed automatically (see -`gc.worktreePruneExpire` in linkgit:git-config[1]), or you can run -`git worktree prune` in the main or any linked working tree to -clean up any stale administrative files. - -If a linked working tree is stored on a portable device or network share -which is not always mounted, you can prevent its administrative files from -being pruned by issuing the `git worktree lock` command, optionally -specifying `--reason` to explain why the working tree is locked. - -COMMANDS --------- -add <path> [<commit-ish>]:: - -Create `<path>` and checkout `<commit-ish>` into it. The new working directory -is linked to the current repository, sharing everything except working -directory specific files such as HEAD, index, etc. `-` may also be -specified as `<commit-ish>`; it is synonymous with `@{-1}`. -+ -If <commit-ish> is a branch name (call it `<branch>`) and is not found, -and neither `-b` nor `-B` nor `--detach` are used, but there does -exist a tracking branch in exactly one remote (call it `<remote>`) -with a matching name, treat as equivalent to: -+ ------------- -$ git worktree add --track -b <branch> <path> <remote>/<branch> ------------- -+ -If the branch exists in multiple remotes and one of them is named by -the `checkout.defaultRemote` configuration variable, we'll use that -one for the purposes of disambiguation, even if the `<branch>` isn't -unique across all remotes. Set it to -e.g. `checkout.defaultRemote=origin` to always checkout remote -branches from there if `<branch>` is ambiguous but exists on the -'origin' remote. See also `checkout.defaultRemote` in -linkgit:git-config[1]. -+ -If `<commit-ish>` is omitted and neither `-b` nor `-B` nor `--detach` used, -then, as a convenience, the new worktree is associated with a branch -(call it `<branch>`) named after `$(basename <path>)`. If `<branch>` -doesn't exist, a new branch based on HEAD is automatically created as -if `-b <branch>` was given. If `<branch>` does exist, it will be -checked out in the new worktree, if it's not checked out anywhere -else, otherwise the command will refuse to create the worktree (unless -`--force` is used). - -list:: - -List details of each worktree. The main worktree is listed first, followed by -each of the linked worktrees. The output details include if the worktree is -bare, the revision currently checked out, and the branch currently checked out -(or 'detached HEAD' if none). - -lock:: - -If a working tree is on a portable device or network share which -is not always mounted, lock it to prevent its administrative -files from being pruned automatically. This also prevents it from -being moved or deleted. Optionally, specify a reason for the lock -with `--reason`. - -move:: - -Move a working tree to a new location. Note that the main working tree -or linked working trees containing submodules cannot be moved. - -prune:: - -Prune working tree information in $GIT_DIR/worktrees. - -remove:: - -Remove a working tree. Only clean working trees (no untracked files -and no modification in tracked files) can be removed. Unclean working -trees or ones with submodules can be removed with `--force`. The main -working tree cannot be removed. - -unlock:: - -Unlock a working tree, allowing it to be pruned, moved or deleted. - -OPTIONS -------- - --f:: ---force:: - By default, `add` refuses to create a new working tree when - `<commit-ish>` is a branch name and is already checked out by - another working tree, or if `<path>` is already assigned to some - working tree but is missing (for instance, if `<path>` was deleted - manually). This option overrides these safeguards. To add a missing but - locked working tree path, specify `--force` twice. -+ -`move` refuses to move a locked working tree unless `--force` is specified -twice. -+ -`remove` refuses to remove an unclean working tree unless `--force` is used. -To remove a locked working tree, specify `--force` twice. - --b <new-branch>:: --B <new-branch>:: - With `add`, create a new branch named `<new-branch>` starting at - `<commit-ish>`, and check out `<new-branch>` into the new working tree. - If `<commit-ish>` is omitted, it defaults to HEAD. - By default, `-b` refuses to create a new branch if it already - exists. `-B` overrides this safeguard, resetting `<new-branch>` to - `<commit-ish>`. - ---detach:: - With `add`, detach HEAD in the new working tree. See "DETACHED HEAD" - in linkgit:git-checkout[1]. - ---[no-]checkout:: - By default, `add` checks out `<commit-ish>`, however, `--no-checkout` can - be used to suppress checkout in order to make customizations, - such as configuring sparse-checkout. See "Sparse checkout" - in linkgit:git-read-tree[1]. - ---[no-]guess-remote:: - With `worktree add <path>`, without `<commit-ish>`, instead - of creating a new branch from HEAD, if there exists a tracking - branch in exactly one remote matching the basename of `<path>`, - base the new branch on the remote-tracking branch, and mark - the remote-tracking branch as "upstream" from the new branch. -+ -This can also be set up as the default behaviour by using the -`worktree.guessRemote` config option. - ---[no-]track:: - When creating a new branch, if `<commit-ish>` is a branch, - mark it as "upstream" from the new branch. This is the - default if `<commit-ish>` is a remote-tracking branch. See - "--track" in linkgit:git-branch[1] for details. - ---lock:: - Keep the working tree locked after creation. This is the - equivalent of `git worktree lock` after `git worktree add`, - but without race condition. - --n:: ---dry-run:: - With `prune`, do not remove anything; just report what it would - remove. - ---porcelain:: - With `list`, output in an easy-to-parse format for scripts. - This format will remain stable across Git versions and regardless of user - configuration. See below for details. - --q:: ---quiet:: - With 'add', suppress feedback messages. - --v:: ---verbose:: - With `prune`, report all removals. - ---expire <time>:: - With `prune`, only expire unused working trees older than <time>. - ---reason <string>:: - With `lock`, an explanation why the working tree is locked. - -<worktree>:: - Working trees can be identified by path, either relative or - absolute. -+ -If the last path components in the working tree's path is unique among -working trees, it can be used to identify worktrees. For example if -you only have two working trees, at "/abc/def/ghi" and "/abc/def/ggg", -then "ghi" or "def/ghi" is enough to point to the former working tree. - -REFS ----- -In multiple working trees, some refs may be shared between all working -trees, some refs are local. One example is HEAD is different for all -working trees. This section is about the sharing rules and how to access -refs of one working tree from another. - -In general, all pseudo refs are per working tree and all refs starting -with "refs/" are shared. Pseudo refs are ones like HEAD which are -directly under GIT_DIR instead of inside GIT_DIR/refs. There is one -exception to this: refs inside refs/bisect and refs/worktree is not -shared. - -Refs that are per working tree can still be accessed from another -working tree via two special paths, main-worktree and worktrees. The -former gives access to per-worktree refs of the main working tree, -while the latter to all linked working trees. - -For example, main-worktree/HEAD or main-worktree/refs/bisect/good -resolve to the same value as the main working tree's HEAD and -refs/bisect/good respectively. Similarly, worktrees/foo/HEAD or -worktrees/bar/refs/bisect/bad are the same as -GIT_COMMON_DIR/worktrees/foo/HEAD and -GIT_COMMON_DIR/worktrees/bar/refs/bisect/bad. - -To access refs, it's best not to look inside GIT_DIR directly. Instead -use commands such as linkgit:git-rev-parse[1] or linkgit:git-update-ref[1] -which will handle refs correctly. - -CONFIGURATION FILE ------------------- -By default, the repository "config" file is shared across all working -trees. If the config variables `core.bare` or `core.worktree` are -already present in the config file, they will be applied to the main -working trees only. - -In order to have configuration specific to working trees, you can turn -on "worktreeConfig" extension, e.g.: - ------------- -$ git config extensions.worktreeConfig true ------------- - -In this mode, specific configuration stays in the path pointed by `git -rev-parse --git-path config.worktree`. You can add or update -configuration in this file with `git config --worktree`. Older Git -versions will refuse to access repositories with this extension. - -Note that in this file, the exception for `core.bare` and `core.worktree` -is gone. If you have them in $GIT_DIR/config before, you must move -them to the `config.worktree` of the main working tree. You may also -take this opportunity to review and move other configuration that you -do not want to share to all working trees: - - - `core.worktree` and `core.bare` should never be shared - - - `core.sparseCheckout` is recommended per working tree, unless you - are sure you always use sparse checkout for all working trees. - -DETAILS -------- -Each linked working tree has a private sub-directory in the repository's -$GIT_DIR/worktrees directory. The private sub-directory's name is usually -the base name of the linked working tree's path, possibly appended with a -number to make it unique. For example, when `$GIT_DIR=/path/main/.git` the -command `git worktree add /path/other/test-next next` creates the linked -working tree in `/path/other/test-next` and also creates a -`$GIT_DIR/worktrees/test-next` directory (or `$GIT_DIR/worktrees/test-next1` -if `test-next` is already taken). - -Within a linked working tree, $GIT_DIR is set to point to this private -directory (e.g. `/path/main/.git/worktrees/test-next` in the example) and -$GIT_COMMON_DIR is set to point back to the main working tree's $GIT_DIR -(e.g. `/path/main/.git`). These settings are made in a `.git` file located at -the top directory of the linked working tree. - -Path resolution via `git rev-parse --git-path` uses either -$GIT_DIR or $GIT_COMMON_DIR depending on the path. For example, in the -linked working tree `git rev-parse --git-path HEAD` returns -`/path/main/.git/worktrees/test-next/HEAD` (not -`/path/other/test-next/.git/HEAD` or `/path/main/.git/HEAD`) while `git -rev-parse --git-path refs/heads/master` uses -$GIT_COMMON_DIR and returns `/path/main/.git/refs/heads/master`, -since refs are shared across all working trees, except refs/bisect and -refs/worktree. - -See linkgit:gitrepository-layout[5] for more information. The rule of -thumb is do not make any assumption about whether a path belongs to -$GIT_DIR or $GIT_COMMON_DIR when you need to directly access something -inside $GIT_DIR. Use `git rev-parse --git-path` to get the final path. - -If you manually move a linked working tree, you need to update the 'gitdir' file -in the entry's directory. For example, if a linked working tree is moved -to `/newpath/test-next` and its `.git` file points to -`/path/main/.git/worktrees/test-next`, then update -`/path/main/.git/worktrees/test-next/gitdir` to reference `/newpath/test-next` -instead. - -To prevent a $GIT_DIR/worktrees entry from being pruned (which -can be useful in some situations, such as when the -entry's working tree is stored on a portable device), use the -`git worktree lock` command, which adds a file named -'locked' to the entry's directory. The file contains the reason in -plain text. For example, if a linked working tree's `.git` file points -to `/path/main/.git/worktrees/test-next` then a file named -`/path/main/.git/worktrees/test-next/locked` will prevent the -`test-next` entry from being pruned. See -linkgit:gitrepository-layout[5] for details. - -When extensions.worktreeConfig is enabled, the config file -`.git/worktrees/<id>/config.worktree` is read after `.git/config` is. - -LIST OUTPUT FORMAT ------------------- -The worktree list command has two output formats. The default format shows the -details on a single line with columns. For example: - ------------- -$ git worktree list -/path/to/bare-source (bare) -/path/to/linked-worktree abcd1234 [master] -/path/to/other-linked-worktree 1234abc (detached HEAD) ------------- - -Porcelain Format -~~~~~~~~~~~~~~~~ -The porcelain format has a line per attribute. Attributes are listed with a -label and value separated by a single space. Boolean attributes (like 'bare' -and 'detached') are listed as a label only, and are only present if and only -if the value is true. The first attribute of a worktree is always `worktree`, -an empty line indicates the end of the record. For example: - ------------- -$ git worktree list --porcelain -worktree /path/to/bare-source -bare - -worktree /path/to/linked-worktree -HEAD abcd1234abcd1234abcd1234abcd1234abcd1234 -branch refs/heads/master - -worktree /path/to/other-linked-worktree -HEAD 1234abc1234abc1234abc1234abc1234abc1234a -detached - ------------- - -EXAMPLES --------- -You are in the middle of a refactoring session and your boss comes in and -demands that you fix something immediately. You might typically use -linkgit:git-stash[1] to store your changes away temporarily, however, your -working tree is in such a state of disarray (with new, moved, and removed -files, and other bits and pieces strewn around) that you don't want to risk -disturbing any of it. Instead, you create a temporary linked working tree to -make the emergency fix, remove it when done, and then resume your earlier -refactoring session. - ------------- -$ git worktree add -b emergency-fix ../temp master -$ pushd ../temp -# ... hack hack hack ... -$ git commit -a -m 'emergency fix for boss' -$ popd -$ git worktree remove ../temp ------------- - -BUGS ----- -Multiple checkout in general is still experimental, and the support -for submodules is incomplete. It is NOT recommended to make multiple -checkouts of a superproject. - -GIT ---- -Part of the linkgit:git[1] suite |