diff options
Diffstat (limited to 'third_party/git/Documentation/git-for-each-ref.txt')
| -rw-r--r-- | third_party/git/Documentation/git-for-each-ref.txt | 394 |
1 files changed, 0 insertions, 394 deletions
diff --git a/third_party/git/Documentation/git-for-each-ref.txt b/third_party/git/Documentation/git-for-each-ref.txt deleted file mode 100644 index 6dcd39f6f6..0000000000 --- a/third_party/git/Documentation/git-for-each-ref.txt +++ /dev/null @@ -1,394 +0,0 @@ -git-for-each-ref(1) -=================== - -NAME ----- -git-for-each-ref - Output information on each ref - -SYNOPSIS --------- -[verse] -'git for-each-ref' [--count=<count>] [--shell|--perl|--python|--tcl] - [(--sort=<key>)...] [--format=<format>] [<pattern>...] - [--points-at=<object>] - (--merged[=<object>] | --no-merged[=<object>]) - [--contains[=<object>]] [--no-contains[=<object>]] - -DESCRIPTION ------------ - -Iterate over all refs that match `<pattern>` and show them -according to the given `<format>`, after sorting them according -to the given set of `<key>`. If `<count>` is given, stop after -showing that many refs. The interpolated values in `<format>` -can optionally be quoted as string literals in the specified -host language allowing their direct evaluation in that language. - -OPTIONS -------- -<pattern>...:: - If one or more patterns are given, only refs are shown that - match against at least one pattern, either using fnmatch(3) or - literally, in the latter case matching completely or from the - beginning up to a slash. - ---count=<count>:: - By default the command shows all refs that match - `<pattern>`. This option makes it stop after showing - that many refs. - ---sort=<key>:: - A field name to sort on. Prefix `-` to sort in - descending order of the value. When unspecified, - `refname` is used. You may use the --sort=<key> option - multiple times, in which case the last key becomes the primary - key. - ---format=<format>:: - A string that interpolates `%(fieldname)` from a ref being shown - and the object it points at. If `fieldname` - is prefixed with an asterisk (`*`) and the ref points - at a tag object, use the value for the field in the object - which the tag object refers to (instead of the field in the tag object). - When unspecified, `<format>` defaults to - `%(objectname) SPC %(objecttype) TAB %(refname)`. - It also interpolates `%%` to `%`, and `%xx` where `xx` - are hex digits interpolates to character with hex code - `xx`; for example `%00` interpolates to `\0` (NUL), - `%09` to `\t` (TAB) and `%0a` to `\n` (LF). - ---color[=<when>]:: - Respect any colors specified in the `--format` option. The - `<when>` field must be one of `always`, `never`, or `auto` (if - `<when>` is absent, behave as if `always` was given). - ---shell:: ---perl:: ---python:: ---tcl:: - If given, strings that substitute `%(fieldname)` - placeholders are quoted as string literals suitable for - the specified host language. This is meant to produce - a scriptlet that can directly be `eval`ed. - ---points-at=<object>:: - Only list refs which points at the given object. - ---merged[=<object>]:: - Only list refs whose tips are reachable from the - specified commit (HEAD if not specified), - incompatible with `--no-merged`. - ---no-merged[=<object>]:: - Only list refs whose tips are not reachable from the - specified commit (HEAD if not specified), - incompatible with `--merged`. - ---contains[=<object>]:: - Only list refs which contain the specified commit (HEAD if not - specified). - ---no-contains[=<object>]:: - Only list refs which don't contain the specified commit (HEAD - if not specified). - ---ignore-case:: - Sorting and filtering refs are case insensitive. - -FIELD NAMES ------------ - -Various values from structured fields in referenced objects can -be used to interpolate into the resulting output, or as sort -keys. - -For all objects, the following names can be used: - -refname:: - The name of the ref (the part after $GIT_DIR/). - For a non-ambiguous short name of the ref append `:short`. - The option core.warnAmbiguousRefs is used to select the strict - abbreviation mode. If `lstrip=<N>` (`rstrip=<N>`) is appended, strips `<N>` - slash-separated path components from the front (back) of the refname - (e.g. `%(refname:lstrip=2)` turns `refs/tags/foo` into `foo` and - `%(refname:rstrip=2)` turns `refs/tags/foo` into `refs`). - If `<N>` is a negative number, strip as many path components as - necessary from the specified end to leave `-<N>` path components - (e.g. `%(refname:lstrip=-2)` turns - `refs/tags/foo` into `tags/foo` and `%(refname:rstrip=-1)` - turns `refs/tags/foo` into `refs`). When the ref does not have - enough components, the result becomes an empty string if - stripping with positive <N>, or it becomes the full refname if - stripping with negative <N>. Neither is an error. -+ -`strip` can be used as a synonym to `lstrip`. - -objecttype:: - The type of the object (`blob`, `tree`, `commit`, `tag`). - -objectsize:: - The size of the object (the same as 'git cat-file -s' reports). - Append `:disk` to get the size, in bytes, that the object takes up on - disk. See the note about on-disk sizes in the `CAVEATS` section below. -objectname:: - The object name (aka SHA-1). - For a non-ambiguous abbreviation of the object name append `:short`. - For an abbreviation of the object name with desired length append - `:short=<length>`, where the minimum length is MINIMUM_ABBREV. The - length may be exceeded to ensure unique object names. -deltabase:: - This expands to the object name of the delta base for the - given object, if it is stored as a delta. Otherwise it - expands to the null object name (all zeroes). - -upstream:: - The name of a local ref which can be considered ``upstream'' - from the displayed ref. Respects `:short`, `:lstrip` and - `:rstrip` in the same way as `refname` above. Additionally - respects `:track` to show "[ahead N, behind M]" and - `:trackshort` to show the terse version: ">" (ahead), "<" - (behind), "<>" (ahead and behind), or "=" (in sync). `:track` - also prints "[gone]" whenever unknown upstream ref is - encountered. Append `:track,nobracket` to show tracking - information without brackets (i.e "ahead N, behind M"). -+ -For any remote-tracking branch `%(upstream)`, `%(upstream:remotename)` -and `%(upstream:remoteref)` refer to the name of the remote and the -name of the tracked remote ref, respectively. In other words, the -remote-tracking branch can be updated explicitly and individually by -using the refspec `%(upstream:remoteref):%(upstream)` to fetch from -`%(upstream:remotename)`. -+ -Has no effect if the ref does not have tracking information associated -with it. All the options apart from `nobracket` are mutually exclusive, -but if used together the last option is selected. - -push:: - The name of a local ref which represents the `@{push}` - location for the displayed ref. Respects `:short`, `:lstrip`, - `:rstrip`, `:track`, `:trackshort`, `:remotename`, and `:remoteref` - options as `upstream` does. Produces an empty string if no `@{push}` - ref is configured. - -HEAD:: - '*' if HEAD matches current ref (the checked out branch), ' ' - otherwise. - -color:: - Change output color. Followed by `:<colorname>`, where color - names are described under Values in the "CONFIGURATION FILE" - section of linkgit:git-config[1]. For example, - `%(color:bold red)`. - -align:: - Left-, middle-, or right-align the content between - %(align:...) and %(end). The "align:" is followed by - `width=<width>` and `position=<position>` in any order - separated by a comma, where the `<position>` is either left, - right or middle, default being left and `<width>` is the total - length of the content with alignment. For brevity, the - "width=" and/or "position=" prefixes may be omitted, and bare - <width> and <position> used instead. For instance, - `%(align:<width>,<position>)`. If the contents length is more - than the width then no alignment is performed. If used with - `--quote` everything in between %(align:...) and %(end) is - quoted, but if nested then only the topmost level performs - quoting. - -if:: - Used as %(if)...%(then)...%(end) or - %(if)...%(then)...%(else)...%(end). If there is an atom with - value or string literal after the %(if) then everything after - the %(then) is printed, else if the %(else) atom is used, then - everything after %(else) is printed. We ignore space when - evaluating the string before %(then), this is useful when we - use the %(HEAD) atom which prints either "*" or " " and we - want to apply the 'if' condition only on the 'HEAD' ref. - Append ":equals=<string>" or ":notequals=<string>" to compare - the value between the %(if:...) and %(then) atoms with the - given string. - -symref:: - The ref which the given symbolic ref refers to. If not a - symbolic ref, nothing is printed. Respects the `:short`, - `:lstrip` and `:rstrip` options in the same way as `refname` - above. - -worktreepath:: - The absolute path to the worktree in which the ref is checked - out, if it is checked out in any linked worktree. Empty string - otherwise. - -In addition to the above, for commit and tag objects, the header -field names (`tree`, `parent`, `object`, `type`, and `tag`) can -be used to specify the value in the header field. - -For commit and tag objects, the special `creatordate` and `creator` -fields will correspond to the appropriate date or name-email-date tuple -from the `committer` or `tagger` fields depending on the object type. -These are intended for working on a mix of annotated and lightweight tags. - -Fields that have name-email-date tuple as its value (`author`, -`committer`, and `tagger`) can be suffixed with `name`, `email`, -and `date` to extract the named component. - -The complete message in a commit and tag object is `contents`. -Its first line is `contents:subject`, where subject is the concatenation -of all lines of the commit message up to the first blank line. The next -line is `contents:body`, where body is all of the lines after the first -blank line. The optional GPG signature is `contents:signature`. The -first `N` lines of the message is obtained using `contents:lines=N`. -Additionally, the trailers as interpreted by linkgit:git-interpret-trailers[1] -are obtained as `trailers` (or by using the historical alias -`contents:trailers`). Non-trailer lines from the trailer block can be omitted -with `trailers:only`. Whitespace-continuations can be removed from trailers so -that each trailer appears on a line by itself with its full content with -`trailers:unfold`. Both can be used together as `trailers:unfold,only`. - -For sorting purposes, fields with numeric values sort in numeric order -(`objectsize`, `authordate`, `committerdate`, `creatordate`, `taggerdate`). -All other fields are used to sort in their byte-value order. - -There is also an option to sort by versions, this can be done by using -the fieldname `version:refname` or its alias `v:refname`. - -In any case, a field name that refers to a field inapplicable to -the object referred by the ref does not cause an error. It -returns an empty string instead. - -As a special case for the date-type fields, you may specify a format for -the date by adding `:` followed by date format name (see the -values the `--date` option to linkgit:git-rev-list[1] takes). - -Some atoms like %(align) and %(if) always require a matching %(end). -We call them "opening atoms" and sometimes denote them as %($open). - -When a scripting language specific quoting is in effect, everything -between a top-level opening atom and its matching %(end) is evaluated -according to the semantics of the opening atom and only its result -from the top-level is quoted. - - -EXAMPLES --------- - -An example directly producing formatted text. Show the most recent -3 tagged commits: - ------------- -#!/bin/sh - -git for-each-ref --count=3 --sort='-*authordate' \ ---format='From: %(*authorname) %(*authoremail) -Subject: %(*subject) -Date: %(*authordate) -Ref: %(*refname) - -%(*body) -' 'refs/tags' ------------- - - -A simple example showing the use of shell eval on the output, -demonstrating the use of --shell. List the prefixes of all heads: ------------- -#!/bin/sh - -git for-each-ref --shell --format="ref=%(refname)" refs/heads | \ -while read entry -do - eval "$entry" - echo `dirname $ref` -done ------------- - - -A bit more elaborate report on tags, demonstrating that the format -may be an entire script: ------------- -#!/bin/sh - -fmt=' - r=%(refname) - t=%(*objecttype) - T=${r#refs/tags/} - - o=%(*objectname) - n=%(*authorname) - e=%(*authoremail) - s=%(*subject) - d=%(*authordate) - b=%(*body) - - kind=Tag - if test "z$t" = z - then - # could be a lightweight tag - t=%(objecttype) - kind="Lightweight tag" - o=%(objectname) - n=%(authorname) - e=%(authoremail) - s=%(subject) - d=%(authordate) - b=%(body) - fi - echo "$kind $T points at a $t object $o" - if test "z$t" = zcommit - then - echo "The commit was authored by $n $e -at $d, and titled - - $s - -Its message reads as: -" - echo "$b" | sed -e "s/^/ /" - echo - fi -' - -eval=`git for-each-ref --shell --format="$fmt" \ - --sort='*objecttype' \ - --sort=-taggerdate \ - refs/tags` -eval "$eval" ------------- - - -An example to show the usage of %(if)...%(then)...%(else)...%(end). -This prefixes the current branch with a star. - ------------- -git for-each-ref --format="%(if)%(HEAD)%(then)* %(else) %(end)%(refname:short)" refs/heads/ ------------- - - -An example to show the usage of %(if)...%(then)...%(end). -This prints the authorname, if present. - ------------- -git for-each-ref --format="%(refname)%(if)%(authorname)%(then) Authored by: %(authorname)%(end)" ------------- - -CAVEATS -------- - -Note that the sizes of objects on disk are reported accurately, but care -should be taken in drawing conclusions about which refs or objects are -responsible for disk usage. The size of a packed non-delta object may be -much larger than the size of objects which delta against it, but the -choice of which object is the base and which is the delta is arbitrary -and is subject to change during a repack. - -Note also that multiple copies of an object may be present in the object -database; in this case, it is undefined which copy's size or delta base -will be reported. - -SEE ALSO --------- -linkgit:git-show-ref[1] - -GIT ---- -Part of the linkgit:git[1] suite |