diff options
Diffstat (limited to 'third_party/git/Documentation/config/http.txt')
| -rw-r--r-- | third_party/git/Documentation/config/http.txt | 280 |
1 files changed, 0 insertions, 280 deletions
diff --git a/third_party/git/Documentation/config/http.txt b/third_party/git/Documentation/config/http.txt deleted file mode 100644 index 5a32f5b0a5..0000000000 --- a/third_party/git/Documentation/config/http.txt +++ /dev/null @@ -1,280 +0,0 @@ -http.proxy:: - Override the HTTP proxy, normally configured using the 'http_proxy', - 'https_proxy', and 'all_proxy' environment variables (see `curl(1)`). In - addition to the syntax understood by curl, it is possible to specify a - proxy string with a user name but no password, in which case git will - attempt to acquire one in the same way it does for other credentials. See - linkgit:gitcredentials[7] for more information. The syntax thus is - '[protocol://][user[:password]@]proxyhost[:port]'. This can be overridden - on a per-remote basis; see remote.<name>.proxy - -http.proxyAuthMethod:: - Set the method with which to authenticate against the HTTP proxy. This - only takes effect if the configured proxy string contains a user name part - (i.e. is of the form 'user@host' or 'user@host:port'). This can be - overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`. - Both can be overridden by the `GIT_HTTP_PROXY_AUTHMETHOD` environment - variable. Possible values are: -+ --- -* `anyauth` - Automatically pick a suitable authentication method. It is - assumed that the proxy answers an unauthenticated request with a 407 - status code and one or more Proxy-authenticate headers with supported - authentication methods. This is the default. -* `basic` - HTTP Basic authentication -* `digest` - HTTP Digest authentication; this prevents the password from being - transmitted to the proxy in clear text -* `negotiate` - GSS-Negotiate authentication (compare the --negotiate option - of `curl(1)`) -* `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`) --- - -http.emptyAuth:: - Attempt authentication without seeking a username or password. This - can be used to attempt GSS-Negotiate authentication without specifying - a username in the URL, as libcurl normally requires a username for - authentication. - -http.delegation:: - Control GSSAPI credential delegation. The delegation is disabled - by default in libcurl since version 7.21.7. Set parameter to tell - the server what it is allowed to delegate when it comes to user - credentials. Used with GSS/kerberos. Possible values are: -+ --- -* `none` - Don't allow any delegation. -* `policy` - Delegates if and only if the OK-AS-DELEGATE flag is set in the - Kerberos service ticket, which is a matter of realm policy. -* `always` - Unconditionally allow the server to delegate. --- - - -http.extraHeader:: - Pass an additional HTTP header when communicating with a server. If - more than one such entry exists, all of them are added as extra - headers. To allow overriding the settings inherited from the system - config, an empty value will reset the extra headers to the empty list. - -http.cookieFile:: - The pathname of a file containing previously stored cookie lines, - which should be used - in the Git http session, if they match the server. The file format - of the file to read cookies from should be plain HTTP headers or - the Netscape/Mozilla cookie file format (see `curl(1)`). - NOTE that the file specified with http.cookieFile is used only as - input unless http.saveCookies is set. - -http.saveCookies:: - If set, store cookies received during requests to the file specified by - http.cookieFile. Has no effect if http.cookieFile is unset. - -http.version:: - Use the specified HTTP protocol version when communicating with a server. - If you want to force the default. The available and default version depend - on libcurl. Actually the possible values of - this option are: - - - HTTP/2 - - HTTP/1.1 - -http.sslVersion:: - The SSL version to use when negotiating an SSL connection, if you - want to force the default. The available and default version - depend on whether libcurl was built against NSS or OpenSSL and the - particular configuration of the crypto library in use. Internally - this sets the 'CURLOPT_SSL_VERSION' option; see the libcurl - documentation for more details on the format of this option and - for the ssl version supported. Actually the possible values of - this option are: - - - sslv2 - - sslv3 - - tlsv1 - - tlsv1.0 - - tlsv1.1 - - tlsv1.2 - - tlsv1.3 - -+ -Can be overridden by the `GIT_SSL_VERSION` environment variable. -To force git to use libcurl's default ssl version and ignore any -explicit http.sslversion option, set `GIT_SSL_VERSION` to the -empty string. - -http.sslCipherList:: - A list of SSL ciphers to use when negotiating an SSL connection. - The available ciphers depend on whether libcurl was built against - NSS or OpenSSL and the particular configuration of the crypto - library in use. Internally this sets the 'CURLOPT_SSL_CIPHER_LIST' - option; see the libcurl documentation for more details on the format - of this list. -+ -Can be overridden by the `GIT_SSL_CIPHER_LIST` environment variable. -To force git to use libcurl's default cipher list and ignore any -explicit http.sslCipherList option, set `GIT_SSL_CIPHER_LIST` to the -empty string. - -http.sslVerify:: - Whether to verify the SSL certificate when fetching or pushing - over HTTPS. Defaults to true. Can be overridden by the - `GIT_SSL_NO_VERIFY` environment variable. - -http.sslCert:: - File containing the SSL certificate when fetching or pushing - over HTTPS. Can be overridden by the `GIT_SSL_CERT` environment - variable. - -http.sslKey:: - File containing the SSL private key when fetching or pushing - over HTTPS. Can be overridden by the `GIT_SSL_KEY` environment - variable. - -http.sslCertPasswordProtected:: - Enable Git's password prompt for the SSL certificate. Otherwise - OpenSSL will prompt the user, possibly many times, if the - certificate or private key is encrypted. Can be overridden by the - `GIT_SSL_CERT_PASSWORD_PROTECTED` environment variable. - -http.sslCAInfo:: - File containing the certificates to verify the peer with when - fetching or pushing over HTTPS. Can be overridden by the - `GIT_SSL_CAINFO` environment variable. - -http.sslCAPath:: - Path containing files with the CA certificates to verify the peer - with when fetching or pushing over HTTPS. Can be overridden - by the `GIT_SSL_CAPATH` environment variable. - -http.sslBackend:: - Name of the SSL backend to use (e.g. "openssl" or "schannel"). - This option is ignored if cURL lacks support for choosing the SSL - backend at runtime. - -http.schannelCheckRevoke:: - Used to enforce or disable certificate revocation checks in cURL - when http.sslBackend is set to "schannel". Defaults to `true` if - unset. Only necessary to disable this if Git consistently errors - and the message is about checking the revocation status of a - certificate. This option is ignored if cURL lacks support for - setting the relevant SSL option at runtime. - -http.schannelUseSSLCAInfo:: - As of cURL v7.60.0, the Secure Channel backend can use the - certificate bundle provided via `http.sslCAInfo`, but that would - override the Windows Certificate Store. Since this is not desirable - by default, Git will tell cURL not to use that bundle by default - when the `schannel` backend was configured via `http.sslBackend`, - unless `http.schannelUseSSLCAInfo` overrides this behavior. - -http.pinnedpubkey:: - Public key of the https service. It may either be the filename of - a PEM or DER encoded public key file or a string starting with - 'sha256//' followed by the base64 encoded sha256 hash of the - public key. See also libcurl 'CURLOPT_PINNEDPUBLICKEY'. git will - exit with an error if this option is set but not supported by - cURL. - -http.sslTry:: - Attempt to use AUTH SSL/TLS and encrypted data transfers - when connecting via regular FTP protocol. This might be needed - if the FTP server requires it for security reasons or you wish - to connect securely whenever remote FTP server supports it. - Default is false since it might trigger certificate verification - errors on misconfigured servers. - -http.maxRequests:: - How many HTTP requests to launch in parallel. Can be overridden - by the `GIT_HTTP_MAX_REQUESTS` environment variable. Default is 5. - -http.minSessions:: - The number of curl sessions (counted across slots) to be kept across - requests. They will not be ended with curl_easy_cleanup() until - http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this - value will be capped at 1. Defaults to 1. - -http.postBuffer:: - Maximum size in bytes of the buffer used by smart HTTP - transports when POSTing data to the remote system. - For requests larger than this buffer size, HTTP/1.1 and - Transfer-Encoding: chunked is used to avoid creating a - massive pack file locally. Default is 1 MiB, which is - sufficient for most requests. - -http.lowSpeedLimit, http.lowSpeedTime:: - If the HTTP transfer speed is less than 'http.lowSpeedLimit' - for longer than 'http.lowSpeedTime' seconds, the transfer is aborted. - Can be overridden by the `GIT_HTTP_LOW_SPEED_LIMIT` and - `GIT_HTTP_LOW_SPEED_TIME` environment variables. - -http.noEPSV:: - A boolean which disables using of EPSV ftp command by curl. - This can helpful with some "poor" ftp servers which don't - support EPSV mode. Can be overridden by the `GIT_CURL_FTP_NO_EPSV` - environment variable. Default is false (curl will use EPSV). - -http.userAgent:: - The HTTP USER_AGENT string presented to an HTTP server. The default - value represents the version of the client Git such as git/1.7.1. - This option allows you to override this value to a more common value - such as Mozilla/4.0. This may be necessary, for instance, if - connecting through a firewall that restricts HTTP connections to a set - of common USER_AGENT strings (but not including those like git/1.7.1). - Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable. - -http.followRedirects:: - Whether git should follow HTTP redirects. If set to `true`, git - will transparently follow any redirect issued by a server it - encounters. If set to `false`, git will treat all redirects as - errors. If set to `initial`, git will follow redirects only for - the initial request to a remote, but not for subsequent - follow-up HTTP requests. Since git uses the redirected URL as - the base for the follow-up requests, this is generally - sufficient. The default is `initial`. - -http.<url>.*:: - Any of the http.* options above can be applied selectively to some URLs. - For a config key to match a URL, each element of the config key is - compared to that of the URL, in the following order: -+ --- -. Scheme (e.g., `https` in `https://example.com/`). This field - must match exactly between the config key and the URL. - -. Host/domain name (e.g., `example.com` in `https://example.com/`). - This field must match between the config key and the URL. It is - possible to specify a `*` as part of the host name to match all subdomains - at this level. `https://*.example.com/` for example would match - `https://foo.example.com/`, but not `https://foo.bar.example.com/`. - -. Port number (e.g., `8080` in `http://example.com:8080/`). - This field must match exactly between the config key and the URL. - Omitted port numbers are automatically converted to the correct - default for the scheme before matching. - -. Path (e.g., `repo.git` in `https://example.com/repo.git`). The - path field of the config key must match the path field of the URL - either exactly or as a prefix of slash-delimited path elements. This means - a config key with path `foo/` matches URL path `foo/bar`. A prefix can only - match on a slash (`/`) boundary. Longer matches take precedence (so a config - key with path `foo/bar` is a better match to URL path `foo/bar` than a config - key with just path `foo/`). - -. User name (e.g., `user` in `https://user@example.com/repo.git`). If - the config key has a user name it must match the user name in the - URL exactly. If the config key does not have a user name, that - config key will match a URL with any user name (including none), - but at a lower precedence than a config key with a user name. --- -+ -The list above is ordered by decreasing precedence; a URL that matches -a config key's path is preferred to one that matches its user name. For example, -if the URL is `https://user@example.com/foo/bar` a config key match of -`https://example.com/foo` will be preferred over a config key match of -`https://user@example.com`. -+ -All URLs are normalized before attempting any matching (the password part, -if embedded in the URL, is always ignored for matching purposes) so that -equivalent URLs that are simply spelled differently will match properly. -Environment variable settings always override any matches. The URLs that are -matched against are those given directly to Git commands. This means any URLs -visited as a result of a redirection do not participate in matching. |