diff options
Diffstat (limited to 'configs/shared/emacs/.emacs.d/elpa/evil-20180912.957/evil-repeat.el')
| -rw-r--r-- | configs/shared/emacs/.emacs.d/elpa/evil-20180912.957/evil-repeat.el | 638 |
1 files changed, 0 insertions, 638 deletions
diff --git a/configs/shared/emacs/.emacs.d/elpa/evil-20180912.957/evil-repeat.el b/configs/shared/emacs/.emacs.d/elpa/evil-20180912.957/evil-repeat.el deleted file mode 100644 index 80ef0bf5ebf8..000000000000 --- a/configs/shared/emacs/.emacs.d/elpa/evil-20180912.957/evil-repeat.el +++ /dev/null @@ -1,638 +0,0 @@ -;;; evil-repeat.el --- Repeat system - -;; Author: Frank Fischer <frank.fischer at mathematik.tu-chemnitz.de> -;; Maintainer: Vegard Øye <vegard_oye at hotmail.com> - -;; Version: 1.2.13 - -;; -;; This file is NOT part of GNU Emacs. - -;;; License: - -;; This file is part of Evil. -;; -;; Evil is free software: you can redistribute it and/or modify -;; it under the terms of the GNU General Public License as published by -;; the Free Software Foundation, either version 3 of the License, or -;; (at your option) any later version. -;; -;; Evil is distributed in the hope that it will be useful, -;; but WITHOUT ANY WARRANTY; without even the implied warranty of -;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -;; GNU General Public License for more details. -;; -;; You should have received a copy of the GNU General Public License -;; along with Evil. If not, see <http://www.gnu.org/licenses/>. - -;;; Commentary: - -;; A repeat begins when leaving Normal state; it ends when re-entering -;; Normal state. The diagram below shows possible routes between -;; Normal state (N), Insert state (I), Visual state (V), -;; Operator-Pending state (O) and Replace state (R). (Emacs state -;; is an exception: nothing is repeated in that state.) -;; ___ -;; / \ -;; | R | -;; \___/ -;; ^ | -;; | | -;; ___ |___V ___ -;; / \ <------- / \ -------> / \ -;; | V | | N | | O | -;; \___/ -------> \___/ <------- \___/ -;; | | ^ | -;; | | | | -;; | V___| | -;; | / \ | -;; +--------> | I | <--------+ -;; \___/ -;; -;; The recording of a repeat is started in one of two cases: Either a -;; command is about being executed (in pre-command-hook) or normal -;; state is exited. The recording is stopped whenever a command has -;; being completed and evil is in normal state afterwards. Therefore, -;; a non-inserting command in normal-state is recorded as a single -;; repeat unit. In contrast, if the command leaves normal state and -;; starts insert-state, all commands that are executed until -;; insert-state is left and normal state is reactivated are recorded -;; together in one repeat unit. In other words, a repeat unit consists -;; of all commands that are executed starting and ending in normal -;; state. -;; -;; Not all commands are recorded. There are several commands that are -;; completely ignored and other commands that even abort the currently -;; active recording, e.g., commands that change the current buffer. -;; -;; During recording the repeat information is appended to the variable -;; `evil-repeat-info', which is cleared when the recording -;; starts. This accumulated repeat information is put into the -;; `evil-repeat-ring' when the recording is finished. The dot command, -;; `\[evil-repeat]' (`evil-repeat') replays the most recent entry in -;; the ring, preceeding repeats can be replayed using -;; `\[evil-repeat-pop]' (`evil-repeat-pop'). -;; -;; Repeat information can be stored in almost arbitrary form. How the -;; repeat information for each single command is recored is determined -;; by the :repeat property of the command. This property has the -;; following interpretation: -;; -;; t record commands by storing the key-sequence that invoked it -;; nil ignore this command completely -;; ignore synonym to nil -;; motion command is recorded by storing the key-sequence but only in -;; insert state, otherwise it is ignored. -;; abort stop recording of repeat information immediately -;; change record commands by storing buffer changes -;; SYMBOL if SYMBOL is contained as key in `evil-repeat-types' -;; call the corresponding (function-)value, otherwise -;; call the function associated with SYMBOL. In both -;; cases the function should take exactly one argument -;; which is either 'pre or 'post depending on whether -;; the function is called before or after the execution -;; of the command. -;; -;; Therefore, using a certain SYMBOL one can write specific repeation -;; functions for each command. -;; -;; Each value of ring `evil-repeat-info', i.e., each single repeat -;; information must be one of the following two possibilities: -;; If element is a sequence, it is regarded as a key-sequence to -;; be repeated. Otherwise the element must be a list -;; (FUNCTION PARAMS ...) which will be called using -;; (apply FUNCTION PARAMS) whenever this repeat is being executed. -;; -;; A user supplied repeat function can use the functions -;; `evil-record-repeat' to append further repeat-information of the -;; form described above to `evil-repeat-info'. See the implementation -;; of `evil-repeat-keystrokes' and `evil-repeat-changes' for examples. -;; Those functions are called in different situations before and after -;; the execution of a command. Each function should take one argument -;; which can be either 'pre, 'post, 'pre-operator or 'post-operator -;; specifying when the repeat function has been called. If the command -;; is a usual command the function is called with 'pre before the -;; command is executed and with 'post after the command has been -;; executed. -;; -;; The repeat information is executed with `evil-execute-repeat-info', -;; which passes key-sequence elements to `execute-kbd-macro' and -;; executes other elements as defined above. A special version is -;; `evil-execute-repeat-info-with-count'. This function works as -;; `evil-execute-repeat-info', but replaces the count of the first -;; command. This is done by parsing the key-sequence, ignoring all -;; calls to `digit-prefix-argument' and `negative-argument', and -;; prepending the count as a string to the vector of the remaining -;; key-sequence. - -(require 'evil-states) - -;;; Code: - -(declare-function evil-visual-state-p "evil-visual") -(declare-function evil-visual-range "evil-visual") -(declare-function evil-visual-char "evil-visual") -(declare-function evil-visual-line "evil-visual") -(declare-function evil-visual-block "evil-visual") - -(defmacro evil-without-repeat (&rest body) - (declare (indent defun) - (debug t)) - `(let ((pre-command-hook (remq 'evil-repeat-pre-hook pre-command-hook)) - (post-command-hook (remq 'evil-repeat-post-hook post-command-hook))) - ,@body - (evil-repeat-abort))) - -(defsubst evil-repeat-recording-p () - "Returns non-nil iff a recording is in progress." - (eq evil-recording-repeat t)) - -(defun evil-repeat-start () - "Start recording a new repeat into `evil-repeat-info'." - (evil-repeat-reset t) - (evil-repeat-record-buffer) - (when (evil-visual-state-p) - (let* ((range (evil-visual-range)) - (beg (evil-range-beginning range)) - (end (1- (evil-range-end range))) - (nfwdlines (evil-count-lines beg end))) - (evil-repeat-record - (cond - ((eq evil-visual-selection 'char) - (list #'evil-repeat-visual-char - nfwdlines - (- end - (if (zerop nfwdlines) - beg - (save-excursion - (goto-char end) - (line-beginning-position)))))) - ((eq evil-visual-selection 'line) - (list #'evil-repeat-visual-line nfwdlines)) - ((eq evil-visual-selection 'block) - (list #'evil-repeat-visual-block - nfwdlines - (abs (- (evil-column beg) (evil-column end)))))))))) - -(defun evil-repeat-stop () - "Stop recording a repeat. -Update `evil-repeat-ring' with the accumulated changes -in `evil-repeat-info' and clear variables." - (unwind-protect - (when (evil-repeat-recording-p) - (setq evil-repeat-info - (evil-normalize-repeat-info evil-repeat-info)) - (when (and evil-repeat-info evil-repeat-ring) - (ring-insert evil-repeat-ring evil-repeat-info))) - (evil-repeat-reset nil))) - -(defun evil-repeat-abort () - "Abort current repeation." - (evil-repeat-reset 'abort)) - -(defun evil-repeat-reset (flag) - "Clear all repeat recording variables. -Set `evil-recording-repeat' to FLAG." - (setq evil-recording-repeat flag - evil-repeat-info nil - evil-repeat-buffer nil)) - -(defsubst evil-repeat-record-position (&optional pos) - "Set `evil-repeat-pos' to POS or point." - (setq evil-repeat-pos (or pos (point)))) - -(defun evil-repeat-record-buffer () - "Set `evil-repeat-buffer' to the current buffer." - (unless (minibufferp) - (setq evil-repeat-buffer (current-buffer)))) - -(defmacro evil-save-repeat-info (&rest body) - "Execute BODY, protecting the values of repeat variables." - (declare (indent defun) - (debug t)) - `(let (evil-repeat-ring - evil-recording-repeat - evil-recording-current-command - evil-repeat-info - evil-repeat-changes - evil-repeat-pos - evil-repeat-keys - evil-repeat-buffer - this-command - last-command) - ,@body)) - -(defun evil-repeat-different-buffer-p (&optional strict) - "Whether the buffer has changed in a repeat. -If STRICT is non-nil, returns t if the previous buffer -is unknown; otherwise returns t only if the previous -buffer is known and different from the current buffer." - (and (or (buffer-live-p evil-repeat-buffer) strict) - (not (minibufferp)) - (not (eq (current-buffer) evil-repeat-buffer)))) - -(defun evil-repeat-type (command &optional default) - "Return the :repeat property of COMMAND. -If COMMAND doesn't have this property, return DEFAULT." - (when (functionp command) ; ignore keyboard macros - (let* ((type (evil-get-command-property command :repeat default)) - (repeat-type (assq type evil-repeat-types))) - (if repeat-type (cdr repeat-type) type)))) - -(defun evil-repeat-force-abort-p (repeat-type) - "Returns non-nil iff the current command should abort the recording of repeat information." - (or (evil-repeat-different-buffer-p) ; ... buffer changed - (eq repeat-type 'abort) ; ... explicitely forced - (eq evil-recording-repeat 'abort) ; ... already aborted - (evil-emacs-state-p) ; ... in Emacs state - (and (evil-mouse-events-p (this-command-keys)) ; ... mouse events - (eq repeat-type nil)) - (minibufferp))) ; ... minibuffer activated - -(defun evil-repeat-record (info) - "Add INFO to the end of `evil-repeat-info'." - (when (evil-repeat-recording-p) - (setq evil-repeat-info (nconc evil-repeat-info (list info))))) - -;; called from `evil-normal-state-exit-hook' -(defun evil-repeat-start-hook () - "Record a new repeat when exiting Normal state. -Does not record in Emacs state or if the current command -has :repeat nil." - (when (and (eq (evil-repeat-type this-command t) t) - (not (evil-emacs-state-p))) - (evil-repeat-start))) - -;; called from `pre-command-hook' -(defun evil-repeat-pre-hook () - "Prepare the current command for recording the repeation." - (when evil-local-mode - (let ((repeat-type (evil-repeat-type this-command t))) - (cond - ;; abort the repeat - ((evil-repeat-force-abort-p repeat-type) - ;; We mark the current record as being aborted, because there - ;; may be further pre-hooks following before the post-hook is - ;; called. - (evil-repeat-abort)) - ;; ignore those commands completely - ((null repeat-type)) - ;; record command - (t - ;; In normal-state or visual state, each command is a single - ;; repeation, therefore start a new repeation. - (when (or (evil-normal-state-p) - (evil-visual-state-p)) - (evil-repeat-start)) - (setq evil-recording-current-command t) - (funcall repeat-type 'pre)))))) -(put 'evil-repeat-pre-hook 'permanent-local-hook t) - -;; called from `post-command-hook' -(defun evil-repeat-post-hook () - "Finish recording of repeat-information for the current-command." - (when (and evil-local-mode evil-recording-repeat) - (let ((repeat-type (evil-repeat-type this-command t))) - (cond - ;; abort the repeat - ((evil-repeat-force-abort-p repeat-type) - ;; The command has been aborted but is complete, so just reset - ;; the recording state. - (evil-repeat-reset nil)) - ;; ignore if command should not be recorded or the current - ;; command is not being recorded - ((or (null repeat-type) - (not evil-recording-current-command))) - ;; record command - (t - (funcall repeat-type 'post) - ;; In normal state, the repeat sequence is complete, so record it. - (when (evil-normal-state-p) - (evil-repeat-stop))))) - ;; done with recording the current command - (setq evil-recording-current-command nil))) -(put 'evil-repeat-post-hook 'permanent-local-hook t) - -(defun evil-clear-command-keys () - "Clear `this-command-keys' and all information about the current command keys. -Calling this function prevents further recording of the keys that -invoked the current command" - (clear-this-command-keys t) - (setq evil-repeat-keys "")) - -(defun evil-this-command-keys (&optional post-cmd) - "Version of `this-command-keys' with finer control over prefix args." - (let ((arg (if post-cmd current-prefix-arg prefix-arg))) - (vconcat - (when (and (numberp arg) - ;; Only add prefix if no repeat info recorded yet - (null evil-repeat-info)) - (string-to-vector (number-to-string arg))) - (this-single-command-keys)))) - -(defun evil-repeat-keystrokes (flag) - "Repeation recording function for commands that are repeated by keystrokes." - (cond - ((eq flag 'pre) - (when evil-this-register - (evil-repeat-record - `(set evil-this-register ,evil-this-register))) - (setq evil-repeat-keys (evil-this-command-keys))) - ((eq flag 'post) - (evil-repeat-record (if (zerop (length (evil-this-command-keys t))) - evil-repeat-keys - (evil-this-command-keys t))) - ;; erase commands keys to prevent double recording - (evil-clear-command-keys)))) - -(defun evil-repeat-motion (flag) - "Repeation for motions. Motions are recorded by keystroke but only in insert state." - (when (memq evil-state '(insert replace)) - (evil-repeat-keystrokes flag))) - -(defun evil-repeat-changes (flag) - "Repeation recording function for commands that are repeated by buffer changes." - (cond - ((eq flag 'pre) - (add-hook 'after-change-functions #'evil-repeat-change-hook nil t) - (evil-repeat-start-record-changes)) - ((eq flag 'post) - (remove-hook 'after-change-functions #'evil-repeat-change-hook t) - (evil-repeat-finish-record-changes)))) - -;; called from the `after-change-functions' hook -(defun evil-repeat-change-hook (beg end length) - "Record change information for current command." - (let ((repeat-type (evil-repeat-type this-command t))) - (when (and (evil-repeat-recording-p) - (eq repeat-type 'evil-repeat-changes) - (not (evil-emacs-state-p)) - (not (evil-repeat-different-buffer-p t)) - evil-state) - (unless (evil-repeat-recording-p) - (evil-repeat-start)) - (evil-repeat-record-change (- beg evil-repeat-pos) - (buffer-substring beg end) - length)))) -(put 'evil-repeat-change-hook 'permanent-local-hook t) - -(defun evil-repeat-record-change (relpos ins ndel) - "Record the current buffer changes during a repeat. -If CHANGE is specified, it is added to `evil-repeat-changes'." - (when (evil-repeat-recording-p) - (setq evil-repeat-changes - (nconc evil-repeat-changes (list (list relpos ins ndel)))))) - -(defun evil-repeat-start-record-changes () - "Starts the recording of a new set of buffer changes." - (setq evil-repeat-changes nil) - (evil-repeat-record-position)) - -(defun evil-repeat-finish-record-changes () - "Finishes the recording of buffer changes and records them as repeat." - (when (evil-repeat-recording-p) - (evil-repeat-record `(evil-execute-change - ,evil-repeat-changes - ,(- (point) evil-repeat-pos))) - (setq evil-repeat-changes nil))) - -(defun evil-repeat-insert-at-point (flag) - "Repeation recording function for commands that insert text in region. -This records text insertion when a command inserts some text in a -buffer between (point) and (mark)." - (cond - ((eq flag 'pre) - (add-hook 'after-change-functions #'evil-repeat-insert-at-point-hook nil t)) - ((eq flag 'post) - (remove-hook 'after-change-functions #'evil-repeat-insert-at-point-hook t)))) - -(defun evil-repeat-insert-at-point-hook (beg end length) - (let ((repeat-type (evil-repeat-type this-command t))) - (when (and (evil-repeat-recording-p) - (eq repeat-type 'evil-repeat-insert-at-point) - (not (evil-emacs-state-p)) - (not (evil-repeat-different-buffer-p t)) - evil-state) - (setq evil-repeat-pos beg) - (evil-repeat-record (list 'insert (buffer-substring beg end)))))) -(put 'evil-repeat-insert-at-point-hook 'permanent-local-hook t) - -(defun evil-normalize-repeat-info (repeat-info) - "Concatenate consecutive arrays in REPEAT-INFO. -Returns a single array." - (let* ((result (cons nil nil)) - (result-last result) - cur cur-last) - (dolist (rep repeat-info) - (cond - ((null rep)) - ((arrayp rep) - (setq rep (listify-key-sequence rep)) - (cond - (cur - (setcdr cur-last (cons rep nil)) - (setq cur-last (cdr cur-last))) - (t - (setq cur (cons rep nil)) - (setq cur-last cur)))) - (t - (when cur - (setcdr result-last (cons (apply #'vconcat cur) nil)) - (setq result-last (cdr result-last)) - (setq cur nil)) - (setcdr result-last (cons rep nil)) - (setq result-last (cdr result-last))))) - (when cur - (setcdr result-last (cons (apply #'vconcat cur) nil))) - (cdr result))) - -(defun evil-repeat-visual-char (nfwdlines nfwdchars) - "Restores a character visual selection. -If the selection is in a single line, the restored visual -selection covers the same number of characters. If the selection -covers several lines, the restored selection covers the same -number of lines and the same number of characters in the last -line as the original selection." - (evil-visual-char) - (when (> nfwdlines 0) - (forward-line nfwdlines)) - (forward-char nfwdchars)) - -(defun evil-repeat-visual-line (nfwdlines) - "Restores a character visual selection. -If the selection is in a single line, the restored visual -selection covers the same number of characters. If the selection -covers several lines, the restored selection covers the same -number of lines and the same number of characters in the last -line as the original selection." - (evil-visual-line) - (forward-line nfwdlines)) - -(defun evil-repeat-visual-block (nfwdlines nfwdchars) - "Restores a character visual selection. -If the selection is in a single line, the restored visual -selection covers the same number of characters. If the selection -covers several lines, the restored selection covers the same -number of lines and the same number of characters in the last -line as the original selection." - (evil-visual-block) - (let ((col (current-column))) - (forward-line nfwdlines) - (move-to-column (+ col nfwdchars) t))) - -(defun evil-execute-change (changes rel-point) - "Executes as list of changes. - -CHANGES is a list of triples (REL-BEG INSERT-TEXT NDEL). -REL-BEG is the relative position (to point) where the change -takes place. INSERT-TEXT is the text to be inserted at that -position and NDEL the number of characters to be deleted at that -position before insertion. - -REL-POINT is the relative position to point before the changed -where point should be placed after all changes." - (evil-save-repeat-info - (let ((point (point))) - (dolist (change changes) - (goto-char (+ point (nth 0 change))) - (delete-char (nth 2 change)) - (insert (nth 1 change))) - (goto-char (+ point rel-point))))) - -(defun evil-execute-repeat-info (repeat-info) - "Executes a repeat-information REPEAT-INFO." - (evil-save-repeat-info - (dolist (rep repeat-info) - (cond - ((or (arrayp rep) (stringp rep)) - (let ((input-method current-input-method) - (evil-input-method nil)) - (deactivate-input-method) - (unwind-protect - (execute-kbd-macro rep) - (activate-input-method input-method)))) - ((consp rep) - (when (and (= 3 (length rep)) - (eq (nth 0 rep) 'set) - (eq (nth 1 rep) 'evil-this-register) - (>= (nth 2 rep) ?0) - (< (nth 2 rep) ?9)) - (setcar (nthcdr 2 rep) (1+ (nth 2 rep)))) - (apply (car rep) (cdr rep))) - (t - (error "Unexpected repeat-info: %S" rep)))))) - -;; TODO: currently we prepend the replacing count before the -;; key-sequence that calls the command. Can we use direct -;; modification of prefix-arg instead? Does it work in -;; conjunction with `execute-kbd-macro'? -(defun evil-execute-repeat-info-with-count (count repeat-info) - "Repeat the repeat-information REPEAT-INFO with the count of -the first command replaced by COUNT. The count is replaced if -and only if COUNT is non-nil." - (evil-save-repeat-info - (cond - ;; do nothing (zero repeating) - ((and count (zerop count))) - ;; replace count - (count - (let ((evil-repeat-count count) - done) - (while (and repeat-info - (arrayp (car repeat-info)) - (not done)) - (let* ((count-and-cmd (evil-extract-count (pop repeat-info)))) - (push (vconcat (number-to-string count) - (nth 2 count-and-cmd) - (nth 3 count-and-cmd)) - repeat-info) - (setq done t))) - (evil-execute-repeat-info repeat-info))) - ;; repeat with original count - (t - (evil-execute-repeat-info repeat-info))))) - -(evil-define-command evil-repeat (count &optional save-point) - "Repeat the last editing command with count replaced by COUNT. -If SAVE-POINT is non-nil, do not move point." - :repeat ignore - :suppress-operator t - (interactive (list current-prefix-arg - (not evil-repeat-move-cursor))) - (cond - ((null evil-repeat-ring) - (error "Already executing repeat")) - (save-point - (save-excursion - (evil-repeat count))) - (t - (unwind-protect - (let ((confirm-kill-emacs t) - (kill-buffer-hook - (cons #'(lambda () - (user-error "Cannot delete buffer in repeat command")) - kill-buffer-hook)) - (undo-pointer buffer-undo-list)) - (evil-with-single-undo - (setq evil-last-repeat (list (point) count undo-pointer)) - (evil-execute-repeat-info-with-count - count (ring-ref evil-repeat-ring 0)))) - (evil-normal-state))))) - -;; TODO: the same issue concering disabled undos as for `evil-paste-pop' -(evil-define-command evil-repeat-pop (count &optional save-point) - "Replace the just repeated command with a previously executed command. -Only allowed after `evil-repeat', `evil-repeat-pop' or -`evil-repeat-pop-next'. Uses the same repeat count that -was used for the first repeat. - -The COUNT argument inserts the COUNT-th previous kill. -If COUNT is negative, this is a more recent kill." - :repeat nil - :suppress-operator t - (interactive (list (prefix-numeric-value current-prefix-arg) - (not evil-repeat-move-cursor))) - (cond - ((not (and (eq last-command #'evil-repeat) - evil-last-repeat)) - (user-error "Previous command was not evil-repeat: %s" last-command)) - (save-point - (save-excursion - (evil-repeat-pop count))) - (t - (unless (eq buffer-undo-list (nth 2 evil-last-repeat)) - (evil-undo-pop)) - (goto-char (car evil-last-repeat)) - ;; rotate the repeat-ring - (while (> count 0) - (when evil-repeat-ring - (ring-insert-at-beginning evil-repeat-ring - (ring-remove evil-repeat-ring 0))) - (setq count (1- count))) - (while (< count 0) - (when evil-repeat-ring - (ring-insert evil-repeat-ring - (ring-remove evil-repeat-ring))) - (setq count (1+ count))) - (setq this-command #'evil-repeat) - (evil-repeat (cadr evil-last-repeat))))) - -(evil-define-command evil-repeat-pop-next (count &optional save-point) - "Same as `evil-repeat-pop', but with negative COUNT." - :repeat nil - :suppress-operator t - (interactive (list (prefix-numeric-value current-prefix-arg) - (not evil-repeat-move-cursor))) - (evil-repeat-pop (- count) save-point)) - -(defadvice read-key-sequence (before evil activate) - "Record `this-command-keys' before it is reset." - (when (and (evil-repeat-recording-p) - evil-recording-current-command) - (let ((repeat-type (evil-repeat-type this-command t))) - (if (functionp repeat-type) - (funcall repeat-type 'post))))) - -(provide 'evil-repeat) - -;;; evil-repeat.el ends here |